Ford PATS after a module has been replaced
Вставка
- Опубліковано 25 сер 2024
- Watch as we explain what needs to done with the Ford PATS system after a module is replaced. Want a ToolHutUSA sticker send $5 USD to paypal.me/toolhut specify it is for a sticker. Outside US please add some extra for additional postage. You can also support our channel by sending any denomination to paypal.me/toolhut. Any amount is appreciated.
Say Mr. Sam, you have no idea how relieved I was when you showed me I wasn't gonna need an extra $100 for that second key. Got a bad PCM and burnt coils all because we never replaced spark plugs on time. Lesson learned. Many thanks for the info, absolutely invaluable.
Great information as a newer IDS user! In a future video can you touch on programming a Ford module that has failed and can't transfer its program to a new module. Like a PCM failure that you have to use PTS to get the as built data? Or perhaps installing and reprogramming a used PCM? Great Channel!!
THANKS VERY MUCH .
What do I do if my 99 Ford F150 does not let me access the parameters reset after I replaced the instrument cluster?
Yhank you
Need some help!! Much appreciated so my car was sitting for about a year no battery engine being built fasforward to now I had pats issues finally figured it out and it started running crank no start issue but my key fab with a new battery inside as well as the car. The remote would not control the locking and unlocking of the car and the horn would beep and basically go into panic mode then timing it correctly by pressing the button it would shut off but had no control of locking/unlocking of doors. So today I brought the tpms scanner home I only have one key and stupid me selected reset parameters and then also had selected I believe clear key code thinking it would rectify my issue I was wrong I'm now having a crank no start . How do I go about recoding my only key I have in my possession again? My car is a 2004 mustang mach1 and the pats control is in the instrument cluster. When I saw this video I knew rite away I messed up .. thankyou for your post of this video. And i hope to hear from you thankyou for your time..
Thank you very much. Great information. Once again Sam Thanks.
Thank vere mach
My 1999 Ford F-150 theft mode has engaged. Locksmith came out tried to program new keys, said the "immobilizer" (column transceiver I assume) was bad. Replaced it. New locksmith came out, tried to program new keys, stated the immobilizer wouldn't communicate with ECM. I'm at a loss. What is in between the ECM and the transceiver or what could be causing the transceiver not to communicate with the ECM? Is=f it is the cluster, how is communicatioin fixed? Frustrated.
I have the same issue, we're you able to fix it? Thanks
So I replaced my gauge cluster on my 2001 to a very rare used autometer lunar cluster ones I installed it pats kicked in should intake it to Ford or should I swap pmc out of my old cluster to meet cluster
Hey what happened when no key is with the truck I have bought a 2001 ford ranger either I was thinking of buy an ignition barrel with key or putting an older version pcm from 86 Taurus would that work too? Thanks
2004 crown Victoria. I need to replace my PCM. Can I program my existing keys to new PCM with forscan or would I need a known key to the pcm to access that function? Debating on where to go from here
I do believe Forscan will do that function
Hey same after I wait 10 minute wait on my Maxi (security Access Granted ) what is mean? what els i can do ?
I just replaced my customer's pcm on his 2001 Lincoln LS 3.0L for a faulty ignition coil driver caused by a shorted coil. I am able to access the pats system on my snap on scan tool and get through the 10 min function. I have both factory transponder keys and went ahead and erased them and then relearned them. I also went back into the security screen and performed the parameter relearn. When all was said and done I was left with a crank, no start condition. Do you have any idea what I may be missing or doing wrong? You mentioned in your video that if replacing the pcm, then erasing the keys is not necessary. What do you need to do if you do erase the keys when not necessary, as I have done?
Did you perform parameter reset?
Does the transeiver on the lock cylinder have to be programmed after replacement?
no not typically on fords
Can you disable PATS with the IDS on a 2008 Ford F-150 going by example to parameter configuration!? You see this is the situation we get a used PCM from a 2008 F-350 that PCM has PATS in the RV we are going to use don’t have the PATS because key doesn’t have chips is no coil around the ignition lock cylinder. The old PCM no communication with the scanner and immediately you connected the PCM blow the PCM fuse the one from the junk yard doesn’t blow the fuse and you can see DATA pids ...this RV has only two modules separated from the PCM ... ABS, IP....
It's a factory tool it's not made to disable things. Better luck with forscan
I have a pats D system does that mean I need 3 key? I have 2 already and I’m replacing the pcm
2 key should be what you need
Im buying a reflashed PCM for my Excursion and was woundering if the Chinese ebay key programmers that are about $100 able to reprogram the PATs module to the new PCM or do I need the J2534 tool with a laptop to accomplish this.
Try Forscan and a laptop with a obdlink ex pass thru device or Ford IDS with a Vcx2 pass thru. Forscan is free $10 for extended license to program pcm $60 for obdlink. Ford IDS can be bought on EBay for less than $20 vcx cost around $100
Absolutely not you will have to pay the dealer $425 just to program
Yes, you can as long as that device supports your pats type.
Unless doing volume work PATS removal etc are available inexpensively. The Ford Truck Enthusiasts forum is a good place to ask about reliable vendors.
@@obfuscated3090 yea if he wants something priced so cheap it scares me. He should look threw my videos and check out the km100. This tool is too good for its price and can make it easier for it to get it the wrong hands. In my opinion they shouldn't sell these tools without a sales tax account at minimum.q
Can someone please explain how plug and play CPU’s could possibly work? The vendor doesn’t have my keys or a way to connect a scan tool to my car. 1996 mercury villager.
A lot of plug and play pcm will actually send you keys with your pcm
need this ids 106 i have vcm ii with ids 100 thank you
I replaced my pcm with one that i had programmed to my vin number and i have pats system and only one key. What next step do i need to do as far as the one key i have since you say do not erase all keys. I went to the dealer to get a ford key and they cut me one that didn't even fit in the ignition and gave me a refund saying that i had to try a locksmith.
Depending on kind of vehicle I would recommend getting a second key. Make sure they do not clone it.
@@toolhutusaakathecarflasher3019 it's a 2003 ford excursion V10
did you do this on a regular computer or a Ford mechanic computer
@@toolhutusaakathecarflasher3019 I lost my key to my 2008 Mercury sable so I went in two keys on Amazon can I use these keys to start my car?
Only Ford can program it
Ford dealers are the only ones that have the software you cannot buy it
Thank you for sharing your knowledge! I have a question. We are rebuilding a 6F35 for a 2014 Ford Escape and had to put a new techm in. Would a PCM and PATS update be required after I update the TCM module with the new sol body tag info?
It should not
agreed. i do them all the time and they don’t require it. solenoid strategy is usually a prog and go.
2011 Ford E350van ,Someone stole our catalytic converter’s off the church van now it won’t shift out of first when you drive it , Ford dealer said the PCM is bad, They cannot find one anywhere in the United States I bought an aftermarket one remanufactured unprogrammed,
Ford tried to program it today says I can’t use this PCM because it asked for a pats key information
This van does not have a chip key it has the old regular keys is there anyway to get rid of the Pats information off the current rebuild PCM, Ford programmed just fine but the mechanic says there is no Pats system on this van so he cannot use this PCM?.
Any ideas to help us out, thanks much
All they should have to do is a parameter reset and then this PCM would work.
I have pretty much the exact same problem!. 2011 E250 Van with cats stolen and replaced PCM. New PCM seems to be looking for a chip key but van doesn't have chip key. Did you solve the problem? If so, how?
@@toolhutusaakathecarflasher3019 Hello, what software/ hardware would allow me to do a parameter reset on my Ford E250? I have HP Tuners but I don't think that will do it. What system are you using in the video? Is it Forscan?
@@scottjcole the fjds would do it. A few aftermarket professiobal grade scanners will do it. Autel, launch. I belive forscan will also perform this function
@@scottjcole yes only a Ford dealer can program the new PCM
What they had to do was programmed the dash the cluster in the dash to say there was no chip key, after they program the cluster then when turning on the new PCM it married to the cluster and it was not looking for a key with a chip any longer
ford Ac guik problim
show diagnosing....