P&S Crystal Wash Fallout Remover: The Why and How
Вставка
- Опубліковано 4 вер 2024
- Crystal Wash from P&S Detail Products is a general strength industrial fallout remover that can compliment or take place of a general Iron Remover. In the video we discuss what it is and how to use it. It is great for not only decontaminating a car prior to ceramic coating but is also a great pre-spray to unclog a coating
NO WAY!!! THANKS FOR MAKING THIS VID, SYDNI!!!
Hopefully it was worth the wait 🎉
This is a great video, Sydni! We're looking forward to taking delivery of Crystal Wash and some other P&S goodies this week. The UK detailing community will be able to experience the crystals for themselves very soon! 🙌🏻
I got some a last week and i love it. It cleaned up some rims with deep brake dust stains and i sprayed n clayed with it. The car literally glowed afterwards. I dont know how ive never seen this product before but Jamie the Cleaner posted a short of it and i went to get some next day. 19 bucks a gallon too, cheap and very effective also super cool to watch the crystals form
Awesome to hear!! Thanks for giving it a shot and glad you love it!
So if you are using crystal wash. You will need to clay BEFORE using this product?
If you're not using this product and just using Iron Buster, then you clay AFTER?
Why is this?
Thank you
@btbd2785 I spray crystal then contact wash then clay
On a kind of different note.. I'm in love with absolute 💚
Hey Cindy, what’s up I use PNS products on my business error, single time, interior and exterior👍🏼👍🏼👍🏼🤝🙌🏼💯
So if I heard this right…would you say Crystal Wash would take away the need, or rather, take the place of an APC prewash??
It could, I still switch back and forth depending on what I’m dealing with
Awesome Video! Been looking forward to it!
The most anticipated video of the 21st century, finally released!
🤜🤛
😂😂😂
Nice education
Thank You!
I really wish you made a foaming rinseless wash that was thin. Absolute is good but I hate that it's so thick. Very hard to mix in the winter time.
rock the bottle back and forth- don't shake. That will thin it out. For a rinseless to "foam" it would require a content of surfactants and those require rinsing.
This video might break the internet
I hope it does 😂 SBG
it did not
after the dwell time, can I go directly to rinseless wash routine straight away instead of rinsing with running water?
@@ejm110 yep!
What about if I have to wash outside on a hot car? Do I rinse the car off first to cool it down before applying crystal wash, although it says to apply it onto a dry panel
so then would this replace the need for an iron remover? or would both be best?
Wait a minute, you said to do an iron removal (iron buster) after you clay the vehicle... every single video I've seen or anything I've read says to do chemical decontamination before you clay the car... so wondering why you have a different opinion on that..or maybe the steps don't matter that much?
I have an issue with Crystal wash. So I sprayed it on and waited for it to crystalize. I then washed it off and went to my contact wash. After i dried my vehicle. I noticed a few straky, splotchy areas on my paint. I have notcied this on a couple of occasions. Why did this happen? Was it a bad batch or an issue in general with the.process or your product?
Do you dilute Cristal wash or use it 100 percent?
Will this work well to remove road salts during the winter months?
Yes absolutely!
Awesome! Can’t wait to try it!
Never thought about this. I'll be ordering some to try. Was curious about this product for some time.
Just tried Crystal Wash for the the 1st after snow storm wash and it worked amazing! Great product!!
What is the best dilution ratio?
I mostly get heavy contaminated vehicles. In my area, we have tons of manufacturing, a sea port, and several large rail yards all creating lots of various contamination. The claying process is taking up a ton of time and probably costing me money in my details. If I use crystal wash as my pre wash and iron buster as my decon, what's your recommended p&s soap for foaming and bucket use? I currently use pearl and it's not enough. This is for my clients initial wash or uncoated client's cars. Once coated, I am having no issues.
Thanks for the video! It sounds like Crystal Wash is safe to use on all exterior surfaces and common sense should be used in sunny hot conditions. Any other precautions / warnings you advise when using?
When using this rinseless, would you still need to rinse off the crystal wash post working or could I just stay the car down with my wash solution and proceed?
@@Stainlessautos normal wash routine, the Rinsless will get it off just fine
How does it iron removing abilities compare to iron buster and other dedicated iron removers? I assume much weaker given its price point?
Crystal Wash is going to attack and remove other environmental fallout where as dedicated iron removers are only going to remove actual iron. Iron Buster should be used when iron particles are known or seen.
The last thing to do after was and clay mitt is the Iron Decon?
When can we expect crystal wash to be available and to be purchased in Europe (Netherlands)?
I know automatic touchless washes are not ideal, but living in MN in the winter without a heated garage leaves few options. Do you think you could use Crystal Wash as a pretreatment before running through a touchless wash? Or do you need a contact wash to make sure all the product is removed?
Buying some of this asap, saw it on Jamie’s channel, didnt realize its been around so long. But is this able to be diluted at all, and is this bad to let sit on paint in direct sun, til it crystalizes…like almost all other products shouldnt be used in sunlight
Can this be used on matte ppf or matte paint?
How often can I use Crystal Wash?
Anytime you feel the need, but under normal conditions you should only need to use every few months. Some wheels it may be helpful every wash
I thought this stuff was not safe for chrome, polished surfaces, or plastic trim? No? Please reply!
Great video! I Have a 2023 Scat pack with heavy brake dust will this replace Iron Buster ? Could you do a video cleaning wheels maybe with both Iron Buster and Crystal Wash,,, Is Crystal Wash dilutable or Straight ??? Thank You 🙏
@@Lg1969 it’s on our playlist! That one actually came first 😃
Any issue when using this in the sun?
We always best case recommend using in the shade, but when you have to use in the sun work smaller sections. Once crystal wash is dry and you can see the crystals go ahead and wash that area. While we used in direct sun in the video it was not terribly hot, maybe 75 degrees. so you will want to watch surface temperature more than anything
Can you use it on a pressurewasher?
@@SamYacub no, it needs to go on full strength on a dry car and allowed to
Crystallize then you can wash as normal
Been using it it’s awesome
How does it work with Vinyl wrap?
Thats a tough question to answer, it will depend on the brand, condition, whether its coated or not. You'd want to do a test spot.
👍🏼👍🏼👍🏼
I assume this is totally safe on PPF?
I wouldn’t use it on PPF
@@PandSDetailProducts thank you!
I'm still a little confused about where this product really sits. If I still need a claybar to remove other embedded contaminants, and I still need an iron decon to remove the rest of the iron particles, wouldn't that in theory just make this estra work in an unnecessary step?
I say that respectfully as I'm a huge P&S/TRC Fanboy, just kinda left with more questions than answers. I also live in Florida and do not have to deal with road salt so it's possible I just don't understand it's use case since I'm not in those environments.
I'd imagine it would be a good in-between maintenance product though. Kind of like the Swift of the exterior world. Kinda the "Shampoo and Conditioner" combo product to get you by until you truly need a DEEP decon, possibly?
Generally speaking you wont need to use with clay bar, this was more referring to using a clay towel in say a wash/clay/seal process. You would only need to use a clay bar should you feel there is more severe contamination. I probably only pull out a clay bar 1 out of every 100 cars. I was more sharing where you can put it in, I certainly don't use all of that every vehicle. I use Crystal Wah to unclog, I only use Iron Buster if Iron is actually present.
SBG
def DONT rinseless after this.....itll just streak ALL OVER the place...rinse 1st!
It removes water spots?
Since it is a mild acid, newer fresh water spots may be able to be removed with CRystal Wash but if they’re set in you may need a true water spot acid remover
I would love to be your content creator. Let's talk please.