How to Replace Wheel Bearing And Hub Assembly 2009-2019 Ford Flex
Вставка
- Опубліковано 25 сер 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2009-2019 Ford Flex. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2009 Ford Flex
2010 Ford Flex
2011 Ford Flex
2012 Ford Flex
2013 Ford Flex
2014 Ford Flex
2015 Ford Flex
2016 Ford Flex
2017 Ford Flex
2018 Ford Flex
2019 Ford Flex
Tools you will need:
• Pry Bar 1aau.to/oRQ/1AX...
• 17mm Socket 1aau.to/obpn/1A...
• 18mm Socket 1aau.to/oad8/1A...
• 19mm Socket 1aau.to/oad8/1A...
• 21mm Socket 1aau.to/oad8/1A...
• 24mm Socket
• 32mm Socket 1aau.to/ock/1AA...
• 8mm Socket 1aau.to/oa5X/1A...
• Brake Caliper Hanger 1aau.to/oie/1AX...
• T40 Bit 1aau.to/oDd/1AX...
• 1/2 Inch Ratchet 1aau.to/oad8/1A...
• 1/4 Inch Ratchet 1aau.to/oa5X/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obpn/1A...
• Torque Wrench 1aau.to/oaAL/1A...
• Gloves 1aau.to/oXS/1AX...
• Safety Glasses 1aau.to/oQ4/1AX...
• Drain Pan 1aau.to/oyn/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
That was probably the best informational video I've ever watched. Nothing was left out and the explanations were consice and simple. Very well done. Thank you.
Great video but. . . If you live in the salt belt, things will not come apart that easy to the point where you will consider changing the whole knuckle. TRQ puts out great videos and changing the whole knuckle is not that bad hard to do.
This video was great. The only thing I’d change is that you do not have to take off the tie rod end. I was able to easily get to the mourning bolts without ever taking that off. Thanks for this vid!
Very well done instructional video. All the steps were clearly explained, and the audio and camera work were first rate. Thanks.
Excellent video! Well stated, great recording, very little editing "shortcuts", professional work. I thought about doing this myself, but I do not have half of the tools mentioned here, so this one might be over my head.
Thanks for your video very helpful
Thank you for this video! Well put together and descriptive!
WOW 😳 I'm so thankful for this video, what an amazing experience, thank you so much 🙏
Great video. Thanks a lot!
Well presented 👍🏼
Thanks for the video instruction. Can you say how much torch is required for the wheel hub nut (axle). Thanks again
Is it same process for rear wheel?
Does the same torque applies for rear hubs?
Is that for a awd cuz I have to do it awd so is it any different
Its time replacing mine just Waiting for parts
Over torqued!👍🏻