Polo BAH engine rebuild
Вставка
- Опубліковано 3 жов 2024
- This is my wife's old car that broke down and has been standing for more than a year. It was overheating and burning oil. I finally got around to rebuilding the engine. This is a diy build and shows how I do it and not necessarily how it should be done.
As much as you've learned from other people - I've learned from you! Nice video, no unnecessary music. Straight to the point and very informative. Well Done!
Always fun to watch! 🙌
I love this Mr Moses
Amazing work 👑love youre patience and dedication put into your work ..i have a 1.6 16v bah and would like to bring the car to you for a rebuild !!!
Good video and nice approach on the rebuild. I did my BMY engine and getting fault code on the crank sensor connected to the rear main seal P0321, using the tool to install it. Any suggestion is welcome.
I have the car, also requires some attention. Do you mind helping me out since you have expirience already. I would also like to be working with you.
Hi I watch you video where u assembled the bah motor can u do a crankshaft sensor replacement pls
Nice video for educational proposes unfortunately you don't share torque specifications and tools used to viewers to properly learn what you trying to teach them as those are the key factors to help everyone with their builds
What the torque settings for the top cylinder head
Sir where are you based...you such a beautiful motor technician.
Two questions:
1. What specifications did you use for ring gaps?
2. Where did you buy your spares from?
What was the cost of the rebuilt
Hi Sir the name is Musa, I'm having the same model of the car and it's been giving me problems on the engine ever since. I took it to a Merchanic and still landed on the same issue. How can I get hold of you?
Where are you located and how much do you charger to rebuild BLM?
I wish u can fix my BAH engine one of my local mechanic overhaul my engine it was starting just that it had no power and it was rough idling, so after overhaul the engine is no longer starting no spark no petrol from the injectors he told me he fitted the wrong crankshaft for other polo now I have no idea what's going on
Check rear main oil seal, people have a tendency of buying the wrong one
Can you put the cost of the rebuilt
me looking at this about to strip my BLM apart 😢
Very informative and helpful. I have a quick question sir. I have exactly the same car but it’s a 1.6 my 2nd and 3rd plugs are getting slightly
Wet with oil. What is the best way forward do I only do the cylinder head/valve stem seals, oil rings or do i need to do a complete engine overhaul? Your advise will be appreciated thanks.
oil on the top of spark plugs or underneath where the spark happens?
@@aLLDaYeVerydAyAPpLe were the spark happens
hi there whats the torgue settings on the silinder head and the flywheel?im also doing my polo 1.4 16 valve bby model but searching for advice still...any help plz
30nm 90 degrees, 90 degrees(2 times 90 degree cycle) use oil on bottom of threads and underneath top of bolts. Use an MLS gasket and Elrond head bolts.
I have the same car and the engine smokes alot. How do I get hold of you
repla
ce your oil rings and valve stem seals
USELESS IHAVE 6 MAINCAPS WITH A OILWHOLE WHETE IS NO 6 GOING ON WHICH YLIND😅ET?
rebuild my engine but engine just cranks no start. timing done correctly checked everything still no start someone help
Check your crank sensor
@@tsholanangprecious6378 i did problem was crank sensor timing. been driving the car for months now. but its overfueling a lot now, changed spark plugs but still overfuels and exhaust has a strong smell of petrol
any idea what it could be?
Hello can i get Your number,u have a polo 9n that need to be overhauled
You are not a Mechanic 🙈🤔😂😂... Wow please teach me Brother