We've purchased two of these units (the Lekato & Kimafun) based on your thoughtful and comprehensive reviews. Don't want to sound like a broken record, but you do an *excellent* job of reviewing equipment. You acquire hands-on experience with the items you review. Then you thoroughly explain a device's operations, applications, strengths and weaknesses. Your time and talent is truly appreciated, Scott. Thank you.
I have been doing Pro Audio for 45 years, yeah I'm old. I have a low buck system to put together and this video made my selection for me. When I buy I'll try to do it through your link. I am so sick of other peoples lame UA-cam videos. You have it down. Keep up the great work.
@@ScottUhlMusic I bought the lekato wireless system to use with my Sure Super 55 Deluxe microphone and it works great but I have one issue. There is a significant drop in output and clarity when I AB using the wireless vs using the microphone when it is wired. Is it just a matter of turning up the gain and changing the EQ settings on the PA to compensate? The output loss isn't as big of a deal as the loss in clarity of the vocal. If I can't figure out how to make up for the loss in clarity it's a no go for me
I'm not a musician, I'm a videographer who runs his own audio and holy crap was this video useful. Your explanations were crystal clear and very helpful. Thanks bud!
@MrPokemon781 glad to meet other videographers here. I am thinking to get the Lekato to transfer the signal to my Audio field recorder. Would be interesting to hear from your experience. Thanks and keep it up
The Kimafun DEFINITELY had a low end emphasis which set it apart from the other, and I immediately knew that 2 and 5 belong together. For the other ones, not so much of a difference (except for the hiss). The other ones were however very usable still, and it is to be argued if the low end is ADDED on 2 & 5 or SUBSTRACTED on the other ones. So while I agree that with these audio transmission gear, it does not necessary have to be a tone test to determine the best ones, there still are sometimes differences which can matter. Anyhow, awesome review, thanks a ton your videos!
For sure! And that’s why I included it because I know some people like those. Kimafun is my favorite sounding one too, but I gig often with the other ones and they are completely useable too. I honestly wouldn’t have noticed if I didn’t do a sit down comparison in my studio… which again, is part of my point about comparing them in the studio vs how they sound live. Again, just my opinion, and thanks for leaving yours 🤘 I appreciate it!
I bought the Lekato 1s off the back of this video. Only used it at a few rehearsals with my Sontronics Solo mic but working well so far! Im still thinking about upgrading to the EV RE3, Shure SLXD or Sennheiser EW-D at somepoint, but these are great so far.
Thanks for making this video. Very helpful. I watched a lot of UA-cam videos - including yours. I purchased the Lekato and have been very pleased with it after using it for 4 solo gigs. It has worked every time perfectly. At the same time I also got an Ammoon 5.8GHz guitar system. The mic and guitar systems work perfectly together and I've had no drop outs. I'm still trying to adjust to not tripping over cables.
I selected #4 and #7 and as it turns out, that was the Alto Stealth unit. In my opinion, it had more "presence" (midrange perhaps?) to the sound as compared to the others.
I own the Xvive U3 and it works quite reliably on my dynamic Audio OM5. It is reliable but not as reliable as most UHF systems. I play regularly in a restaurant where there will be 80 plus cell phones at any given time. The XLR Xvive would perform flawlessly several shows in a row and then I would get several really fast drop outs. The Xvive guitar system was not useable. I returned one and the replacement functioned poorly as well. I tried the guitar system on 3 different guitars, with the same poor result. Your mileage may vary. I watched this video to try to learn more about the Alto UHF system. I would use the system to send my PA House Mix to a remote PA Speaker. I agree with the reviewer that the dangly antenna on the transmitter would make it undesirable for a handheld mic situation....even though my vocal mic remains on a boom stand, I would prefer to not use this system for that purpose.Nice review over all, Thanks!
People would never know the difference in sound. Lekato is great but the battery starts to wear. I attach a small battery pack to it. I'm going to get the Kimifun one. I like longer range for speakers. Awesome review! Thank you.
Great video, thank you! The thing that intrigues me about the Alto is that it's the lowest frequency and therefore should clear obstacles better. Also, personally I'm getting pretty tired of devices with built in batteries. It can make for a smaller package but if you forget to charge it then you are out of luck whereas you could just plop some AA batteries in it. Also, I've just seen way too many of these built in battery devices failing prematurely. They just become disposable after a year or two of frequent usage. Had this issue with multiple Xvive systems. Thanks again Scott!
Hey fellas, a wedding videographer here, your help and recommendation is immensely appreciated. Looking for the right system to get a feed from ether mix board (1/4 adaptor) or speakers (with an xlr splitter) to plug in the receiver to my zoom recorder. Would the LEKATO do the job? I usually feed my zoom recorder a signal from my camera using a rode go and an xlr cable coming from the dj/band. Recording everything in 32bit flow while sending line out to my live streaming guy. All I'm trying to do with the LEKATO or others is eliminating the need to run cables under/around the band. Thank you sooo so much especially to Scott. Soundies are the best people I run into on sets and events.
If you are doing weddings, I personally would invest in a higher end model like this: ua-cam.com/video/w2lR9TditUc/v-deo.htmlsi=vNbrx3GBbs23WbXb These do work well, but they are cheaper wireless and have less frequencies. For something more important like weddings, I personally would go more higher end
Thank you for the detailed look at all of these! I've used the Lekato for a couple of years now (Own four of these) for PA and have had little if any issues. I think I will try the Kimafun as an alternative. Would love to find a decent wireless mic headset with a similar dongle type setup.
Although the volumn wasn't as loud, I personally like #2. Good low end, clearer. But hard to choose. Now, I have a LeKato MW-1. I like a lot. Going to buy another.
You had the Kimafun plugged into your EV Evolve 50s (16:42) as a serial pair. I've tried this with the Alto Stealth 1 system and the Evolve 30M speakers and I get a horrible buzzing sound, but ONLY when going out (thru or mix) from the Evolve 30M to any other speaker. Have you had this experience with the Kimafun and your Evolve 50s?
Do you actually use wireless to go from your mixer main outs to your speakers? How many frequencies would you have to have to accomplish this with vocal mics, guitars, backing tracks, and cabling? I may be leaving something obvious out, but this certainly sounds possible and it pairs well with your “no wires on stage “ strategy!
Yup! I do that all the time, and it works great! It just replaces the xlr from the mixer to the speaker. Definitely test it, because if that one goes out, that’s ALL your sound.
@@ScottUhlMusic How do you keep all the frequencies separated so there’s no interference between all of them? Are there certain frequencies for cabling (main outs) to powered speakers, and microphones, and guitars? This is all new to me.
@ScottUhlMusic This is what I'm here for mate. Mixer to Powered speakers (not concerned about the mic 🎤 ). So the LEKATOs 5.8 GHz, you are happy with? 🎸🎤🎶✌️🇬🇧
does kimafun can be hooked up to power supply to use it continuously? i need receiver to be always-on, i want to use it as an "xlr" cable for my PA in restaurant, but it have to be in such place that i can't reach constantly, without bothering guests. live musicians will play only for a week end, and use a reguar xlr is not an option
Your channel is literally making me just want the simplest Set up possible. Love what you do. I do have a question though. I run a Kemper live. Is there a wireless ethernet type cable so I can use the footswitch wirelessly? I would looove to eliminate practically all the cables in my set up. Also would it work if I used one of these devices in the video to go from my Kemper to my splitter for my in ears?
Thanks! And just keep in mind, you are starting to add a lot of wireless to your setup. I don’t recommmend using a bunch of cheap ones. I cover that in this video: ua-cam.com/video/Xgw96rY4TAc/v-deo.html I don’t know of wireless Ethernet, but I know you could get the widi Jack and/or widi Master and a midi pedal and control it that way: ua-cam.com/video/bR1zKrNflCY/v-deo.html
Just wanted to chime in... I have been using in ears IEMS to run my wireless PA speakers. Works Incredible!!. Have you done this? Come out your IEM headphone out jack or with a mini XLR to male XLR and plug it into your PA speaker, works great for me. Give it a try!! Instead of going into your IEM headset, go into a PA in jack.
Would I be able to use a Lekato set for vocals and and another Lekato set for a digital piano? I have an amp/pa with 2 mic inputs and 2 instrument inputs.
Hi Scott, Thank you as always for your videos, i have learned so much form you. :) Tech question please , do you think the Lekato Wireless adapter could be used with the behringer powerplay p2 to make it a wireless IEM. I used a Xair 12 desk. Thanks in advance , Cheers
I was like "Omg sounds test 1, 5 & 7 sound amazing. Of course two of those MUST be the same transmitter." Boy was I wrong lmaoooo 3 different transmitters 😫🤣 I guess it doesn't matter which one I buy at this point lol I had to keep watching to learn more and reeeeally choose one. This video was great. I'm in a band and I'm tired of using wired mics, but I'm new to picking a transmitter as you can tell 😅. This video helped sooooo much! Awesome video! Helpful and informative.
My opinion is see if they matched up both times and were the same one. If you didn’t select the same one twice, it doesn’t matter. But that’s just me. Thanks for watching either way 🤘
Thanks for the review. I bought 2x Alto Stealth and tried using them with my floor wedges... experienced tons of dropouts. They might work better for mains on tripods. Not reliable for floor monitors - just sharing in case anyone is looking at those.
Thanks for sharing! Wireless environment is complicated. So it’s not necessarily that “they don’t work with floor monitors” but it could have been on a bad channel and/or didn’t have very good line of sight. I’ve used them before for PA speakers and they’ve worked well. I do prefer the Lekato or Kimafun ones personally
@@ScottUhlMusic I agree whole heartedly. In my case, I believe it's a line of sight thing.. if they were higher up on tripods we likely would have had different results. Because they were on the floor and because we play lots of upbeat covers, they were contending with tons of folks dancing and creating obstacles if you will (honestly, not the best mix for achieving direct line of sight). I'm going to keep them and use one from my mic to my TC Helicon which is right in front of me in hopes to salvage at least one of them ;)
I bought the Lekato one on Amazon to use from connecting my Torpedo cab sim to the in on my rack splitter on my IEM rack. It technically worked but destroyed the guitar tone, added a ton of bad overtones. But that might not be what it’s designed to be used for
I use several brands of these, mostly between mixer and speakers. I use xlr extenders (male&female in one adapter) to plug into mixers, or use 2 ft cables. I stay away from 2.4ghz (bluetooth overlap), preferring uhf. I have had noise on my cheap ones with microphones. I make note of which ones can be plugged into power during operation. Thats not true of all brands. I don’t remember offhand which. I have a couple of other brands that have phantom capability. I also like my Lekato, mostly since its 9ghz, which is less busy in my experirnce.
I have an Xvive U3 I use with a harmonica mic. I was eying up the Lekato for my vocal mic. Would another U3 make more sense? Would the Lekato and Xvive play well together? Which of the so is better? Thanks!
I would be cautious because you are falling into the trap I see the most: using too much cheap wireless all at once. I suggest watching this video: ua-cam.com/video/xRmmgrQoHZU/v-deo.html
Was only able to find out that 3 and 8 were the system because of the annoying 'white noise' during the tests. Beside that, soundwise they sounded great!
How would that work with the Sennheiser mke600, when it's powered with the internal battery? A beginners question: Is this a digital signal traveling through the air or is it still analog? I assume digital?
Would you be able to use the KIMAFUN continuously if you plugged it in? I really like the fact that it has phantom power but I definitely want a receiver that lasts longer than 2 hours.
Question: what is your experience to use wireless xlr to connect a digital amp modeler to studio speakers. I use the hush core at home and live so always cable at home to connect. Any experience on this topic would be useful.
My H&K Tubemeister amp has a built in direct box (xlr connector). I wonder how well suited these wireless adapters would be to create a FOH connection between my amp and PA?
anything running tubes are notoriously noisy and love to interfere with radio signals. this would be a fascinating test case tho. Basically if any of these wireless transmitters worked well with a source w/tube amplification, I would buy these over the others. it's a good idea for a torture test.
What about the Xvive U3? Have you done a review on those? If so comment the link and I will gladly watch that video too. Also thanks for making the decision making easier and saving me some time and money. 💪💯
So we have a lobby outside of our sanctuary were we hold dinners and other small events. My plan is to use two floor monitors in the lobby with wireless transmitters back to the sound board back in the sanctuary. Then I’m looking at getting an inexpensive Phenyx pro wireless microphone system. Do you think it would be ok to put transmitters on both the speakers and the microphone system? Should I use two different systems one for the microphones and one for the speakers?
With only a few cheap wireless, you should be fine. Just the more cheap wireless you use at once the more likely you will get drop outs. It all depends.
Hey question for anyone with an answer for it. We have a wired podcast setup and are looking to use wireless adapters to help manage loose cords. Currently we are using a cloudifter for our mics and I'm still a beginner with some of this stuff, but my question is when using a cloudlifter that uses phantom power from our audio interface does that mean if we got an adapter would we need to pick one that is compatible with phantom power since it would be plugged into the cloudlifter? Maybe a dumb question but rather ask and know for sure. Thanks
About using the Kimafun for the PA… I’m looking to wirelessly connect the XLR Line Out of my mixer to powered speakers a distance away. Does the Kimafun accommodate a hot Line level signal? Or will it distort because it’s expecting a low Mic level signal?
hi scott will these work with personal in ear monitor headphone amplifier such as donner em1 or behringer p2 . which both accepts xlr .... but these wireless xlr are designed for dynamic microphones not an in ear system . do you think there will be problems?
Just discovered your awesome channel. Thank you for your videos. Just got the Lekato MW 1 5.8 Ghz for 4 mics and working beautifully wonderful sound. Going to Zoom L12 daisy chain through Bose T1 to Bose L1 mod 2 column. After all these years got the wireless obsession so decided to buy Lekato 5.8 WS 90 for Mustang lt25 that I mic to mixer to go to Bose speaker. It's a modeling amp with 30 presets and has created lots of buzzing depending upon which preset I use. The hum buzz is driving me kind of crazy so I guess I'll go to one of your other videos about what to do about cheap wireless guitar adapters before I send it back. Any thoughts or advice would be appreciated. Cheers!
I would recommend watching this video to understand cheap vs pro wireless: Choosing the Right WIRELESS SYSTEM - A Comprehensive Guide ua-cam.com/video/Xi2JcMomjQ0/v-deo.html
Hi Scott.... I am looking for a way to make a pair of passive (non-powered ) speakers wireless. will the Kumafun unit work? If not, is there something else out there that will?
If I ran two of these in a row would there be a significant delay? I want to run one from the mixer to a Voicelive, and then back out to the mixer, to utilize a rackmount mic system, but still be able to control the Voicelive on stage. I already have a the Lekato wireless. Proposed Signal Chain Mixer [Wireless XLR OUT] > Voicelive In [Wireless XLR IN] > Voicelive Out [Wireless XLR OUT] > Mixer [Wireless XLR IN] Or honestly any other suggestion to keep my stage wireless. I would like my Helix to be wireless too if I could make it work!
It should be ok, but you never know. Cheaper stuff usually has more latency, that isn’t noticeable by itself, but you can get compounded latency sometimes. I think in most situations should should be fine. Just be careful using too much cheap stuff all at once 👍
hey Scott, Im looking to get Audio out from a mixer wirelessly into a Roland Aerocaster (switcher studio for live video) with 2 XLR inputs. Will any of these work? 🤔
You cannot use Bluetooth for live audio: Is WIRELESS AUDIO The Same As BLUETOOTH? ua-cam.com/video/rKyAxbUBkis/v-deo.html But if you need a good Bluetooth adapter I like this one: ua-cam.com/video/x73vwFApkgQ/v-deo.htmlsi=807khgsZzfBL_UGX
Can I buy a receiver separately? I wish to connect to to PA built in system speakers so I would need to receivers (one for each speaker) can you also make a video on how to connect these to more than one speakers?
You’ll need 1 transmitter and 1 receiver for every wireless signal. You cannot send one transmitter to 2 receivers for example. For mixer to speaker setup, plug the transmitter into the mixer and the receiver into the speaker. Just like you would an XLR cable 👍
@@ScottUhlMusic many thanks ! If i buy two sets of it and put the two receivers on two speakers and put one mic and two receivers on same channel. Then also it will not work? I am ok to use a mixer setup as long as i can connect two speakers wirelessly, do we have such possibilities? Sorry i really cant stand wires.
Hey, could I use the lekato 5.8 microphone adapter with my behringer p2 . I would use the transmitter to the behringer p2 for my in ear monitor and the receiver to an output on my board . Would this work ?
I've tried something similar (using P2 with a Lekato guitar wireless adapter) and it works fine, but it's a bit bulky, and more things to keep charged. I've switched to Lekato ms-1 wireless IEM adapter which is a lot smaller, although 2.4ghz so might not be best in all situations. It's not given me a problem in a room with WiFi close by and 100+ mobile phones.
For the past 7 years I’ve been using a Line 6 G10 system for my wireless MICROPHONE stomp box set up. Now the battery can’t hold a charge and I’m looking for an xlr wireless system for the dry tone. The G10 wasn’t balanced even though it had an xlr output. Are these microphone truly balanced or do they just have xlr in/outputs?
The G10 was used for a microphone? Thats interesting. But glad it worked. I actually dont know if wireless xlr is balanced or not, my guess is yes, but it’s not a cable so im not sure.
@@ScottUhlMusic yeah I use a 1/4” TRS to xlr adapter on the transmitter. The G10 receiver has an XLR output in addition to 1/4” out. I use it for my FX pedal tuba playing. I don’t believe the G10 1/4” output is TRS. The transmitter (G10T or G10TII) is 1/4” and looks TRS but the third ring isn’t to balance the signal. Only to charge the dongle in the receiver. I need a system that I can go either/or between the wireless dry balanced mic or the FX hi-Z pedal depending on my gig. Long battery and NOT 2.4 of course. I use an SM58 as I can easily swap it with one on the gig incase something fails. I don’t use condensers or phantom power although it may sound the best for my low end. The gig is trench warfare 😜 metal sousaphone!
Hey anyone know what would be the best to purchase when singing solo using a beta58a & Senhieser mic here in the uk ?. Singing House Music moving around " not far". Would also be plugged into a portable pa system Thanks in advance
I'm curious if you have issues with added hiss with your Lekato system. I have the Joyo version which looks exactly the same (Joyo even claims to make the Lekato brand), and there's definitely a hiss that isn't there with an XLR cable. In the mix of multiple instruments you probably wouldn't notice, but with a solo acoustic set its definitely present. Just curious if this is a common setback with these cheaper XLR adapters and why the good ones are several hundred dollars more.
That can happen with different setups. That’s what I’ve found with cheaper wireless. I don’t have that problem with my setup really (or at least it’s not noticeable), but it can happen for other people with cheaper wireless.
@@ScottUhlMusic That makes sense. It's very apparent in this Behringer mixer that I tested it on at my desk, but plugging it into my EV 30m PA, its much better. It's still there, but can't really be heard at from an audience standpoint. Love your channel by the way. I've been binge watching all your videos. :)
Hi Scott! I've just subscribed. Thank you for your great reviews! I'm trying to get 4 wireless mic (all sm58), and one wireless accordion mic (it needs phantom, so no brainer it's the kimafun). I'm wondering if it makes sense to get 4 lekato and 1 kimafun, or go with 5 kimafuns because they have more channels. I'm unsure because they are UHF, and we already have 3 Anleon S3. Hope you can help me with a recommendation. Cheers!
Thanks for the sub! I don’t recommend that many cheap wireless all at once. Watch this video: Choosing the Right WIRELESS SYSTEM - A Comprehensive Guide ua-cam.com/video/Xi2JcMomjQ0/v-deo.html
I bought lekato mw-1 for my headworn mic, and sometimes when I work at bars/restaraunts/on ships i hear A LOT of hiss but sometimes this noise dissapear after i turn on/off, and sometimes it did not dissapear and idk what to do and its drive me crazy )))
@@ScottUhlMusic yeah, i think thats because xlr, i worked for a year with much cheaper 2.4ghz guitar joyo wireless and there was no issues at all for year, but with 5.8 xlr i have a lot issue so i guess it’s depend
I tried to guess which ones were the same as each other before checking and my results were 100% wrong. My guesses were 1 and 2, 5 and 7, 3 and 8, 4 and 6. Just shows you've got to try them and see if they work for you and with your gear.
I've owned two pairs of the Lekato (though one was rebadged as Joyo) and unfortunately, they both died. One died because my fiancee accidentally dropped the mic while at karaoke, and the other one just stopped working randomly, and ultimately only lasted about 18 months. We only used them for our own mics at karaoke, or for connecting DI boxes to audio interfaces for recording guitar and bass at home.
@@Domenooch when it's a demo idea and getting it out quickly is more important than perfection, when it's a tone test to send to a band mate to see what they think of the guitar tone, or when it's not actually recording, but just using an amp sim to practice with headphones. Wireless IEM's means I can open a custom preset and go play guitar while being comfortable on the couch in the living room while my fiancee and son are asleep, so as not to disturb them.
I use wireless everything in my small home studio. If I had a larger studio, I would still use them. If I had a million dollar studio I would use a combination of both, with the wired components ran along the ceiling instead of laying cables on the floor. Doing that virtually destroys and chance of buzzing and ground loop. Lets say you are in studio laying tracks. You can hear the engineer in the same headphones as your guitar. In a lot of studios you hear whenever the engineer clicks on his mic to talk to you, switches to your instrument. I used to go to a mid sized studio and that was the engineers business. His bread and butter. And he had his studio as a mix of wired and wireless. All his wired systems were elevated. He originally did that because of ground loop when he started out. And that was the main idea. But as wireless components tech got better he integrated into his studio. His studio is so quiet, even in the monitors, that the first time I recorded with him he starts talking in the control room mic and I didnt even realize his mic had turned on. He proceeded to go AHHH!! and scared the living crap out of me. Now thats quiet!
I bought the alto stealth about 2 weeks ago i used them 2 times and the receiver is eating up the battery life a lot. It last less than 2 hour in brand new batteries. Do you have any idea what would be the problem? Thank man. Great video.
@@ScottUhlMusicthank you for the reply. I don’t know what to do with them. I’m trying to contact alto but they don’t even have a customer phone number. Thanks again.
The more wireless, the less you want to go cheap. I suggest watching this video: Choosing the Right WIRELESS SYSTEM - A Comprehensive Guide ua-cam.com/video/Xi2JcMomjQ0/v-deo.html My suggestion would be 2 lekato and 1 Alto, but again, these are budget wireless. I recommend watching that video 👍
for me I heard a huge difference in the Diginow... i'd personally avoid that one... the rest were very similar, #7 was a little noisy but not as much as 8....
Purchased the alto stealth. Honestly it failed me multiple times. For the price I wouldn’t buy it again. The transmitter and receiver have to be within 15 feet and clear line of sight. If not there is drop out. I also don’t like that you need to change the channel manually on each device. Very inconvenient as a mobile DJ
That’s definitely frustrating. But also not my results. Thats because it ALWAYS depends on the environment you are playing in. Where you played, you need a wider tuning bandwidth and the cheap stuff doesn’t offer that. My advice is to always have a backup, or get two of these on different frequencies, or spend the money on higher end gear 👍
That can happen with cheap stuff with some setups. That is the risk with cheap. Mine works great. Not everyone will have that result with their specific gear
@@ScottUhlMusic Thanks a lot. I am in the USA. I want to use these with my over-the-ear or head-worn with an attached "next to the ear" monitor. I would attach them via the cord they come with and put the transmitter in my pocket. Should I expect problems executing that idea.
So I’m a singer in a band and have always sung through a wired 58 or many years ago a Samson wireless with 58 mics. Would you put you money into the Lekato or the PhenyxPro PTU7000a. Why did you not use the PhenyxPro with your partner if you rate it so highly. Is the PhenyxPro not suitable for lead vocal singing consistently? Incredible videos. Keep me from sleeping as sound porn can only be watched when wife is asleep
The Phenyx pro wireless mics are great! But they aren’t as portable as the lekato adapter. When we travel, I like to bring the lekato for her mic and then I usually just wire my mic. That’s just me for the travel rig that can fit in my backpack
@@ScottUhlMusic so I could use the PhenyxPro as a lead vocal for a pub/function band ? Also do all 4 mic volumes get set on the receiver and then a single line out of that mix goes to the mixer. Forgive my incorrect terms I’ve come back to lead singing after 20 years of musical theatre and the tech is staggering.
Thanks for responding. Last question...all of transmitters/receivers for all units "need" to be line of sight? Are there any you'd recommend if line of sight is not logistically feasible?@@ScottUhlMusic
If line of sight is not possible you 100% should NOT be using cheap ones like this. It can work sometimes, but line of sight is always best with any wireless. But if you cannot get line of sight, getting higher end wireless is important. I recommend watching this video; ua-cam.com/video/Xgw96rY4TAc/v-deo.htmlsi=m5Nx3-_TSr-RkUqu
I make a query. What happens when the battery, which is internal, reduces its performance. Should I buy another equipment or is it replaced? Previous systems run on removable batteries. I await your comments. greetings
The “doesn’t work with xyz mic/system” I go over in this video: What Is The BEST CHEAP WIRELESS SYSTEM - Part III ua-cam.com/video/xRmmgrQoHZU/v-deo.html That’s specifically about cheap guitar wireless, but the idea is still the same for cheap xlr adapters
We've purchased two of these units (the Lekato & Kimafun) based on your thoughtful and comprehensive reviews. Don't want to sound like a broken record, but you do an *excellent* job of reviewing equipment. You acquire hands-on experience with the items you review. Then you thoroughly explain a device's operations, applications, strengths and weaknesses.
Your time and talent is truly appreciated, Scott. Thank you.
Thank you! I really appreciate that :) glad you’ve enjoyed the videos and the wireless 🤘🤘
I have been doing Pro Audio for 45 years, yeah I'm old. I have a low buck system to put together and this video made my selection for me. When I buy I'll try to do it through your link. I am so sick of other peoples lame UA-cam videos. You have it down. Keep up the great work.
Thank you! I appreciate that 😊
@@ScottUhlMusic I bought the lekato wireless system to use with my Sure Super 55 Deluxe microphone and it works great but I have one issue. There is a significant drop in output and clarity when I AB using the wireless vs using the microphone when it is wired. Is it just a matter of turning up the gain and changing the EQ settings on the PA to compensate? The output loss isn't as big of a deal as the loss in clarity of the vocal. If I can't figure out how to make up for the loss in clarity it's a no go for me
Your channel is like EVERYTHING I've been looking for. Literally. Thank you for all you do!
Thank you 🙏
💯Scotts channel is super baller!
I'm not a musician, I'm a videographer who runs his own audio and holy crap was this video useful. Your explanations were crystal clear and very helpful. Thanks bud!
Nice! Glad you found it helpful 🤘
I'm also a videographer, which one worked best for you and got good quality audio to your camera?
@MrPokemon781 glad to meet other videographers here. I am thinking to get the Lekato to transfer the signal to my Audio field recorder. Would be interesting to hear from your experience. Thanks and keep it up
Excellent video! I wasn't looking for a video on wireless but after I started listening I stayed for the entire presentation and subscribing!
Thank you for the sub 🤘 Glad you found it helpful
The Kimafun DEFINITELY had a low end emphasis which set it apart from the other, and I immediately knew that 2 and 5 belong together. For the other ones, not so much of a difference (except for the hiss). The other ones were however very usable still, and it is to be argued if the low end is ADDED on 2 & 5 or SUBSTRACTED on the other ones. So while I agree that with these audio transmission gear, it does not necessary have to be a tone test to determine the best ones, there still are sometimes differences which can matter.
Anyhow, awesome review, thanks a ton your videos!
For sure! And that’s why I included it because I know some people like those. Kimafun is my favorite sounding one too, but I gig often with the other ones and they are completely useable too. I honestly wouldn’t have noticed if I didn’t do a sit down comparison in my studio… which again, is part of my point about comparing them in the studio vs how they sound live. Again, just my opinion, and thanks for leaving yours 🤘 I appreciate it!
dude, finding your vids has been a god send!
Thank you 🙏
I bought the Lekato 1s off the back of this video.
Only used it at a few rehearsals with my Sontronics Solo mic but working well so far!
Im still thinking about upgrading to the EV RE3, Shure SLXD or Sennheiser EW-D at somepoint, but these are great so far.
Thanks!
Thank you!
Excellent presentation which really helps to evaluate the various models and how they perform in real life.
Thanks for making this video. Very helpful. I watched a lot of UA-cam videos - including yours. I purchased the Lekato and have been very pleased with it after using it for 4 solo gigs. It has worked every time perfectly. At the same time I also got an Ammoon 5.8GHz guitar system. The mic and guitar systems work perfectly together and I've had no drop outs. I'm still trying to adjust to not tripping over cables.
Nice! Yeah the lekato is definitely a gem!
Hey would it last for years?
Thanks for doing this Scott. I appreciate the quick feedback to requests.
Thanks Paul!
I selected #4 and #7 and as it turns out, that was the Alto Stealth unit. In my opinion, it had more "presence" (midrange perhaps?) to the sound as compared to the others.
I liked 1, 4, & 7
As always, great info. Would have been cool to see the Xvive unit compared here as well. Still, keep up the good work Scott!
Thanks! And I didn’t include it because it’s 2.4ghz and it’s more expensive, so ultimately I passed on it
I own the Xvive U3 and it works quite reliably on my dynamic Audio OM5. It is reliable but not as reliable as most UHF systems. I play regularly in a restaurant where there will be 80 plus cell phones at any given time. The XLR Xvive would perform flawlessly several shows in a row and then I would get several really fast drop outs. The Xvive guitar system was not useable. I returned one and the replacement functioned poorly as well. I tried the guitar system on 3 different guitars, with the same poor result. Your mileage may vary. I watched this video to try to learn more about the Alto UHF system. I would use the system to send my PA House Mix to a remote PA Speaker. I agree with the reviewer that the dangly antenna on the transmitter would make it undesirable for a handheld mic situation....even though my vocal mic remains on a boom stand, I would prefer to not use this system for that purpose.Nice review over all, Thanks!
People would never know the difference in sound. Lekato is great but the battery starts to wear. I attach a small battery pack to it. I'm going to get the Kimifun one. I like longer range for speakers. Awesome review! Thank you.
Great video, thank you! The thing that intrigues me about the Alto is that it's the lowest frequency and therefore should clear obstacles better. Also, personally I'm getting pretty tired of devices with built in batteries. It can make for a smaller package but if you forget to charge it then you are out of luck whereas you could just plop some AA batteries in it. Also, I've just seen way too many of these built in battery devices failing prematurely. They just become disposable after a year or two of frequent usage. Had this issue with multiple Xvive systems. Thanks again Scott!
This is a great video 👏🏾!!! Especially the tone test!
Thank you!
Thank you very much for the video! You deserve more appreciation, you're making high quality clean videos wich are extremely enjoyable 👏
Thank you 😊
Hey fellas, a wedding videographer here, your help and recommendation is immensely appreciated. Looking for the right system to get a feed from ether mix board (1/4 adaptor) or speakers (with an xlr splitter) to plug in the receiver to my zoom recorder. Would the LEKATO do the job? I usually feed my zoom recorder a signal from my camera using a rode go and an xlr cable coming from the dj/band. Recording everything in 32bit flow while sending line out to my live streaming guy. All I'm trying to do with the LEKATO or others is eliminating the need to run cables under/around the band. Thank you sooo so much especially to Scott. Soundies are the best people I run into on sets and events.
If you are doing weddings, I personally would invest in a higher end model like this: ua-cam.com/video/w2lR9TditUc/v-deo.htmlsi=vNbrx3GBbs23WbXb
These do work well, but they are cheaper wireless and have less frequencies. For something more important like weddings, I personally would go more higher end
Thank you for the detailed look at all of these! I've used the Lekato for a couple of years now (Own four of these) for PA and have had little if any issues. I think I will try the Kimafun as an alternative.
Would love to find a decent wireless mic headset with a similar dongle type setup.
Glad it was helpful. And I haven’t seen many, except I think MiPro might make one? I could be wrong
Fantastic video comparison, thanks so much for the excellent information and real-world use and experience suggestions!
Glad you enjoyed it!
Thanks buddy, a great analysis, however too early to share my experience as I am a new bie to wireless adapters, keep up the good work, good luck !
Although the volumn wasn't as loud, I personally like #2. Good low end, clearer. But hard to choose. Now, I have a LeKato MW-1. I like a lot. Going to buy another.
You had the Kimafun plugged into your EV Evolve 50s (16:42) as a serial pair. I've tried this with the Alto Stealth 1 system and the Evolve 30M speakers and I get a horrible buzzing sound, but ONLY when going out (thru or mix) from the Evolve 30M to any other speaker. Have you had this experience with the Kimafun and your Evolve 50s?
The Kimafun work great! I know some people have complained about the Altos. I haven’t had that problem though
Do you actually use wireless to go from your mixer main outs to your speakers? How many frequencies would you have to have to accomplish this with vocal mics, guitars, backing tracks, and cabling? I may be leaving something obvious out, but this certainly sounds possible and it pairs well with your “no wires on stage “ strategy!
Yup! I do that all the time, and it works great! It just replaces the xlr from the mixer to the speaker. Definitely test it, because if that one goes out, that’s ALL your sound.
@@ScottUhlMusic How do you keep all the frequencies separated so there’s no interference between all of them? Are there certain frequencies for cabling (main outs) to powered speakers, and microphones, and guitars?
This is all new to me.
@ScottUhlMusic
This is what I'm here for mate. Mixer to Powered speakers (not concerned about the mic 🎤 ).
So the LEKATOs 5.8 GHz, you are happy with?
🎸🎤🎶✌️🇬🇧
Great video! Helped so much
does kimafun can be hooked up to power supply to use it continuously? i need receiver to be always-on, i want to use it as an "xlr" cable for my PA in restaurant, but it have to be in such place that i can't reach constantly, without bothering guests. live musicians will play only for a week end, and use a reguar xlr is not an option
Your channel is literally making me just want the simplest Set up possible. Love what you do. I do have a question though.
I run a Kemper live. Is there a wireless ethernet type cable so I can use the footswitch wirelessly? I would looove to eliminate practically all the cables in my set up.
Also would it work if I used one of these devices in the video to go from my Kemper to my splitter for my in ears?
Thanks! And just keep in mind, you are starting to add a lot of wireless to your setup. I don’t recommmend using a bunch of cheap ones. I cover that in this video:
ua-cam.com/video/Xgw96rY4TAc/v-deo.html
I don’t know of wireless Ethernet, but I know you could get the widi Jack and/or widi Master and a midi pedal and control it that way:
ua-cam.com/video/bR1zKrNflCY/v-deo.html
Just wanted to chime in... I have been using in ears IEMS to run my wireless PA speakers. Works Incredible!!. Have you done this? Come out your IEM headphone out jack or with a mini XLR to male XLR and plug it into your PA speaker, works great for me. Give it a try!! Instead of going into your IEM headset, go into a PA in jack.
You technically can do this, yes 👍 and if it sounds good, who is to say otherwise? 🤘
Thanks buddy, great analysis, too early to share my experiences as I am a new bie to wireless adapters
Awesome assessment. Thank you.
Thanks for watching 🤘
Would I be able to use a Lekato set for vocals and and another Lekato set for a digital piano? I have an amp/pa with 2 mic inputs and 2 instrument inputs.
Two wireless systems usually isn’t a problem, of course it all depends on the venue/environment, but most of the time 2 are fine
Hi Scott, Thank you as always for your videos, i have learned so much form you. :)
Tech question please , do you think the Lekato Wireless adapter could be used with the behringer powerplay p2 to make it a wireless IEM. I used a Xair 12 desk.
Thanks in advance , Cheers
Yup you could do that. I have a video about something similar: ua-cam.com/video/AoykGJRcPPw/v-deo.html
Thanks bro for the great video. Now i have better understanding of what to buy. Mostly gonna be used for p/a.
I was like "Omg sounds test 1, 5 & 7 sound amazing. Of course two of those MUST be the same transmitter." Boy was I wrong lmaoooo 3 different transmitters 😫🤣 I guess it doesn't matter which one I buy at this point lol I had to keep watching to learn more and reeeeally choose one.
This video was great. I'm in a band and I'm tired of using wired mics, but I'm new to picking a transmitter as you can tell 😅. This video helped sooooo much!
Awesome video! Helpful and informative.
Awesome! Glad you found the video helpful 🤘
Appreciate this. I use the Lekato!
Good choice!
I listened to all the tones of transmitters ,5 and 6 seem better tone to me. thanks for your advice.
My opinion is see if they matched up both times and were the same one. If you didn’t select the same one twice, it doesn’t matter. But that’s just me. Thanks for watching either way 🤘
Thanks for the review. I bought 2x Alto Stealth and tried using them with my floor wedges... experienced tons of dropouts. They might work better for mains on tripods. Not reliable for floor monitors - just sharing in case anyone is looking at those.
Thanks for sharing! Wireless environment is complicated. So it’s not necessarily that “they don’t work with floor monitors” but it could have been on a bad channel and/or didn’t have very good line of sight. I’ve used them before for PA speakers and they’ve worked well. I do prefer the Lekato or Kimafun ones personally
@@ScottUhlMusic I agree whole heartedly. In my case, I believe it's a line of sight thing.. if they were higher up on tripods we likely would have had different results. Because they were on the floor and because we play lots of upbeat covers, they were contending with tons of folks dancing and creating obstacles if you will (honestly, not the best mix for achieving direct line of sight). I'm going to keep them and use one from my mic to my TC Helicon which is right in front of me in hopes to salvage at least one of them ;)
Jesus h Christ why did it take so long for me to find someone reviewing gear that knows what the hell he’s talking about. Keep it up Lol
I bought the Lekato one on Amazon to use from connecting my Torpedo cab sim to the in on my rack splitter on my IEM rack. It technically worked but destroyed the guitar tone, added a ton of bad overtones. But that might not be what it’s designed to be used for
I use several brands of these, mostly between mixer and speakers. I use xlr extenders (male&female in one adapter) to plug into mixers, or use 2 ft cables. I stay away from 2.4ghz (bluetooth overlap), preferring uhf. I have had noise on my cheap ones with microphones.
I make note of which ones can be plugged into power during operation. Thats not true of all brands. I don’t remember offhand which. I have a couple of other brands that have phantom capability.
I also like my Lekato, mostly since its 9ghz, which is less busy in my experirnce.
I have an Xvive U3 I use with a harmonica mic. I was eying up the Lekato for my vocal mic. Would another U3 make more sense? Would the Lekato and Xvive play well together? Which of the so is better? Thanks!
I would be cautious because you are falling into the trap I see the most: using too much cheap wireless all at once. I suggest watching this video: ua-cam.com/video/xRmmgrQoHZU/v-deo.html
Was only able to find out that 3 and 8 were the system because of the annoying 'white noise' during the tests. Beside that, soundwise they sounded great!
Yup, exactly. Those were obvious that they sounded bad right away 👍
How would that work with the Sennheiser mke600, when it's powered with the internal battery? A beginners question: Is this a digital signal traveling through the air or is it still analog? I assume digital?
2.4Ghz and 5.8Ghz are digital, I go into more details here: ua-cam.com/video/y0A8nmFj96Q/v-deo.htmlsi=aZkkrQ1GDvTDk3FD
Would you be able to use the KIMAFUN continuously if you plugged it in? I really like the fact that it has phantom power but I definitely want a receiver that lasts longer than 2 hours.
I’m not sure, but I believe you can yes
Question: what is your experience to use wireless xlr to connect a digital amp modeler to studio speakers. I use the hush core at home and live so always cable at home to connect. Any experience on this topic would be useful.
You can do that 👍 anything that accepts xlr audio, these can be used instead
Oke great. Any advice on what to use? Do I need high quality or is a budget version sufficient. Distance is short.
What about 1/4 inch ?
I’m just looking for wireless xlr system to use for a podcast with my interface
Try the lekato unless you need phantom power
Excelent presentation. I’ve subscribed. Cheers.
Awesome, thank you!
My H&K Tubemeister amp has a built in direct box (xlr connector). I wonder how well suited these wireless adapters would be to create a FOH connection between my amp and PA?
Try it, and return it if it doesn’t work 👍 those sennheiser ones I use are a nice high end one if you need it
anything running tubes are notoriously noisy and love to interfere with radio signals. this would be a fascinating test case tho. Basically if any of these wireless transmitters worked well with a source w/tube amplification, I would buy these over the others. it's a good idea for a torture test.
What about the Xvive U3? Have you done a review on those? If so comment the link and I will gladly watch that video too. Also thanks for making the decision making easier and saving me some time and money. 💪💯
I have used it, and I don’t like the price of it for being in 2.4Ghz personally. But I use other xvive gear that works great!
@ScottUhlMusic thanks 👍
So we have a lobby outside of our sanctuary were we hold dinners and other small events. My plan is to use two floor monitors in the lobby with wireless transmitters back to the sound board back in the sanctuary. Then I’m looking at getting an inexpensive Phenyx pro wireless microphone system. Do you think it would be ok to put transmitters on both the speakers and the microphone system? Should I use two different systems one for the microphones and one for the speakers?
With only a few cheap wireless, you should be fine. Just the more cheap wireless you use at once the more likely you will get drop outs. It all depends.
Hey question for anyone with an answer for it. We have a wired podcast setup and are looking to use wireless adapters to help manage loose cords. Currently we are using a cloudifter for our mics and I'm still a beginner with some of this stuff, but my question is when using a cloudlifter that uses phantom power from our audio interface does that mean if we got an adapter would we need to pick one that is compatible with phantom power since it would be plugged into the cloudlifter? Maybe a dumb question but rather ask and know for sure. Thanks
I haven’t tried that, that’s a good question. I do not know.
About using the Kimafun for the PA… I’m looking to wirelessly connect the XLR Line Out of my mixer to powered speakers a distance away. Does the Kimafun accommodate a hot Line level signal? Or will it distort because it’s expecting a low Mic level signal?
I know that this one has a mic line switch: ua-cam.com/video/AdIWNVF1xtA/v-deo.htmlsi=w0tOXtE6iC0ckkWt
But also if you are looking “a distance away” I would recommend this one instead: ua-cam.com/video/w2lR9TditUc/v-deo.htmlsi=PGR7T3NxTJYTHAxK
@@ScottUhlMusic thanks. I watched the video and I think this one is the winner so far
hi scott will these work with personal in ear monitor headphone amplifier such as donner em1 or behringer p2 . which both accepts xlr .... but these wireless xlr are designed for dynamic microphones not an in ear system . do you think there will be problems?
Yup, I’ve done that before 👍
Just discovered your awesome channel. Thank you for your videos. Just got the Lekato MW 1 5.8 Ghz for 4 mics and working beautifully wonderful sound. Going to Zoom L12 daisy chain through Bose T1 to Bose L1 mod 2 column. After all these years got the wireless obsession so decided to buy Lekato 5.8 WS 90 for Mustang lt25 that I mic to mixer to go to Bose speaker. It's a modeling amp with 30 presets and has created lots of buzzing depending upon which preset I use. The hum buzz is driving me kind of crazy so I guess I'll go to one of your other videos about what to do about cheap wireless guitar adapters before I send it back. Any thoughts or advice would be appreciated. Cheers!
I would recommend watching this video to understand cheap vs pro wireless: Choosing the Right WIRELESS SYSTEM - A Comprehensive Guide
ua-cam.com/video/Xi2JcMomjQ0/v-deo.html
@@ScottUhlMusic thank you Scott.
Great reviews. Btw does turning the phantom power on during a performance make a "thud" through the PA ? Tnx
I’ve never turned it on during the performance. It should be setup ahead of time
Hi Scott.... I am looking for a way to make a pair of passive (non-powered ) speakers wireless. will the Kumafun unit work? If not, is there something else out there that will?
Yup, these should work well 👍
If I ran two of these in a row would there be a significant delay? I want to run one from the mixer to a Voicelive, and then back out to the mixer, to utilize a rackmount mic system, but still be able to control the Voicelive on stage. I already have a the Lekato wireless.
Proposed Signal Chain
Mixer [Wireless XLR OUT] > Voicelive In [Wireless XLR IN] > Voicelive Out [Wireless XLR OUT] > Mixer [Wireless XLR IN]
Or honestly any other suggestion to keep my stage wireless. I would like my Helix to be wireless too if I could make it work!
It should be ok, but you never know. Cheaper stuff usually has more latency, that isn’t noticeable by itself, but you can get compounded latency sometimes. I think in most situations should should be fine. Just be careful using too much cheap stuff all at once 👍
@@ScottUhlMusic thanks for taking the time to answer! Much appreciated!
I use the altos no problems as yet
hey Scott, Im looking to get Audio out from a mixer wirelessly into a Roland Aerocaster (switcher studio for live video) with 2 XLR inputs. Will any of these work? 🤔
If it takes xlr cables, any of these will work. If it needs phantom power, only the Kimafun will work 👍
What is the general mic you use for the video? Is that an SM7 B? Sounds really good
Thanks! Yup, I use the sm7db which is great
Any suggestions on stereo Bluetooth receivers that can pick up/share a signal from a transmitter or even just a phone?
You cannot use Bluetooth for live audio: Is WIRELESS AUDIO The Same As BLUETOOTH?
ua-cam.com/video/rKyAxbUBkis/v-deo.html
But if you need a good Bluetooth adapter I like this one: ua-cam.com/video/x73vwFApkgQ/v-deo.htmlsi=807khgsZzfBL_UGX
@@ScottUhlMusic yep. Just looking to get signal from phone to active pa in the workshop / around the property
Can I buy a receiver separately? I wish to connect to to PA built in system speakers so I would need to receivers (one for each speaker) can you also make a video on how to connect these to more than one speakers?
You’ll need 1 transmitter and 1 receiver for every wireless signal. You cannot send one transmitter to 2 receivers for example.
For mixer to speaker setup, plug the transmitter into the mixer and the receiver into the speaker. Just like you would an XLR cable 👍
@@ScottUhlMusic many thanks ! If i buy two sets of it and put the two receivers on two speakers and put one mic and two receivers on same channel. Then also it will not work? I am ok to use a mixer setup as long as i can connect two speakers wirelessly, do we have such possibilities? Sorry i really cant stand wires.
Excellent video
You arent wrong about the headphones when I am looking at stuff to buy I put on Athm20x to hear clearly.
As long as I don’t hear it live, that’s what’s important to me personally
I hope you had a great time In my country the Bahamas
We definitely did! That ocean water is incredible 🥰
I enjoy your a
Show and information.
Can you use a wireless XLR adapter on a DMX network?
Not with these, but I have reviewed wireless DMX dongles: ua-cam.com/video/uF1WwpKcsXI/v-deo.html
Hey, could I use the lekato 5.8 microphone adapter with my behringer p2 . I would use the transmitter to the behringer p2 for my in ear monitor and the receiver to an output on my board . Would this work ?
Yup 👍
I've tried something similar (using P2 with a Lekato guitar wireless adapter) and it works fine, but it's a bit bulky, and more things to keep charged. I've switched to Lekato ms-1 wireless IEM adapter which is a lot smaller, although 2.4ghz so might not be best in all situations. It's not given me a problem in a room with WiFi close by and 100+ mobile phones.
For the past 7 years I’ve been using a Line 6 G10 system for my wireless MICROPHONE stomp box set up. Now the battery can’t hold a charge and I’m looking for an xlr wireless system for the dry tone. The G10 wasn’t balanced even though it had an xlr output. Are these microphone truly balanced or do they just have xlr in/outputs?
The G10 was used for a microphone? Thats interesting. But glad it worked. I actually dont know if wireless xlr is balanced or not, my guess is yes, but it’s not a cable so im not sure.
@@ScottUhlMusic yeah I use a 1/4” TRS to xlr adapter on the transmitter. The G10 receiver has an XLR output in addition to 1/4” out. I use it for my FX pedal tuba playing. I don’t believe the G10 1/4” output is TRS. The transmitter (G10T or G10TII) is 1/4” and looks TRS but the third ring isn’t to balance the signal. Only to charge the dongle in the receiver. I need a system that I can go either/or between the wireless dry balanced mic or the FX hi-Z pedal depending on my gig. Long battery and NOT 2.4 of course. I use an SM58 as I can easily swap it with one on the gig incase something fails. I don’t use condensers or phantom power although it may sound the best for my low end. The gig is trench warfare 😜 metal sousaphone!
what's phantom power? what's a talk-back mic?
is it ok to use 2 of the Lekato in a Stereo Out setup? any signal issues like conflict since it is same brand and frequency?
Should be fine in most situations. It all depends on the wireless environment 👍
@@ScottUhlMusic Thank you!! I used one for a gig I forgot I was wireless! really great. thanks for the info and video.
Very nice. Thanks again Scott
Thanks 🤘
Top review 🖖🏾
Thank you 🙏
Can we use this wireless adaptor for video? eg. tapping the sound from the console/mixer for my camcorder?
It can replace anything that is xlr 👍
I have a rodecaster pro. Would 4 of these work to d clutter my podcast set up?
4 is likely too many cheap wireless: 5 MUST-KNOW Tips for Cheap WIRELESS MUSIC GEAR!
ua-cam.com/video/kUNBHi5F3aQ/v-deo.html
Hey anyone know what would be the best to purchase when singing solo using a beta58a & Senhieser mic here in the uk ?. Singing House Music moving around " not far". Would also be plugged into a portable pa system
Thanks in advance
Lekato 5.8ghz is legal basically everywhere 👍
@@ScottUhlMusic Thankyou mate!! Which mic any suggestions Sen e83 or Ev nd76 for House /club vocalist?
I'm curious if you have issues with added hiss with your Lekato system. I have the Joyo version which looks exactly the same (Joyo even claims to make the Lekato brand), and there's definitely a hiss that isn't there with an XLR cable. In the mix of multiple instruments you probably wouldn't notice, but with a solo acoustic set its definitely present. Just curious if this is a common setback with these cheaper XLR adapters and why the good ones are several hundred dollars more.
That can happen with different setups. That’s what I’ve found with cheaper wireless. I don’t have that problem with my setup really (or at least it’s not noticeable), but it can happen for other people with cheaper wireless.
@@ScottUhlMusic That makes sense. It's very apparent in this Behringer mixer that I tested it on at my desk, but plugging it into my EV 30m PA, its much better. It's still there, but can't really be heard at from an audience standpoint. Love your channel by the way. I've been binge watching all your videos. :)
Hi Scott! I've just subscribed. Thank you for your great reviews! I'm trying to get 4 wireless mic (all sm58), and one wireless accordion mic (it needs phantom, so no brainer it's the kimafun). I'm wondering if it makes sense to get 4 lekato and 1 kimafun, or go with 5 kimafuns because they have more channels. I'm unsure because they are UHF, and we already have 3 Anleon S3. Hope you can help me with a recommendation. Cheers!
Thanks for the sub! I don’t recommend that many cheap wireless all at once. Watch this video: Choosing the Right WIRELESS SYSTEM - A Comprehensive Guide
ua-cam.com/video/Xi2JcMomjQ0/v-deo.html
I bought lekato mw-1 for my headworn mic, and sometimes when I work at bars/restaraunts/on ships i hear A LOT of hiss but sometimes this noise dissapear after i turn on/off, and sometimes it did not dissapear and idk what to do and its drive me crazy )))
You DID get a cheap wireless. That’s part of the risk. Try changing channels, but that’s part of what can happen with cheaper gear
@@ScottUhlMusic yeah, i think thats because xlr, i worked for a year with much cheaper 2.4ghz guitar joyo wireless and there was no issues at all for year, but with 5.8 xlr i have a lot issue so i guess it’s depend
I tried to guess which ones were the same as each other before checking and my results were 100% wrong. My guesses were 1 and 2, 5 and 7, 3 and 8, 4 and 6. Just shows you've got to try them and see if they work for you and with your gear.
Yup! Exactly! Thanks for commenting, I appreciate the insight 🤘
@@ScottUhlMusic no worries, thanks for the content. Very helpful
I've owned two pairs of the Lekato (though one was rebadged as Joyo) and unfortunately, they both died. One died because my fiancee accidentally dropped the mic while at karaoke, and the other one just stopped working randomly, and ultimately only lasted about 18 months. We only used them for our own mics at karaoke, or for connecting DI boxes to audio interfaces for recording guitar and bass at home.
Cheap stuff can break easier, that’s true. I have one and so does my singer, and both of ours are still working great 👍
Why would you record wirelessly.
@@Domenooch when it's a demo idea and getting it out quickly is more important than perfection, when it's a tone test to send to a band mate to see what they think of the guitar tone, or when it's not actually recording, but just using an amp sim to practice with headphones. Wireless IEM's means I can open a custom preset and go play guitar while being comfortable on the couch in the living room while my fiancee and son are asleep, so as not to disturb them.
I use wireless everything in my small home studio. If I had a larger studio, I would still use them. If I had a million dollar studio I would use a combination of both, with the wired components ran along the ceiling instead of laying cables on the floor. Doing that virtually destroys and chance of buzzing and ground loop. Lets say you are in studio laying tracks. You can hear the engineer in the same headphones as your guitar. In a lot of studios you hear whenever the engineer clicks on his mic to talk to you, switches to your instrument. I used to go to a mid sized studio and that was the engineers business. His bread and butter. And he had his studio as a mix of wired and wireless. All his wired systems were elevated. He originally did that because of ground loop when he started out. And that was the main idea. But as wireless components tech got better he integrated into his studio. His studio is so quiet, even in the monitors, that the first time I recorded with him he starts talking in the control room mic and I didnt even realize his mic had turned on. He proceeded to go AHHH!! and scared the living crap out of me. Now thats quiet!
I bought the alto stealth about 2 weeks ago i used them 2 times and the receiver is eating up the battery life a lot. It last less than 2 hour in brand new batteries. Do you have any idea what would be the problem? Thank man. Great video.
Weird, mine survives 4 hours, but I do find the battery life on the alto is probably the worst, but I’m getting more than 2 hours out of it.
@@ScottUhlMusicthank you for the reply. I don’t know what to do with them. I’m trying to contact alto but they don’t even have a customer phone number. Thanks again.
Have you tried any of these with a guitar model such as a helix, etc? Thanks in advance.
For going out of the helix? Yeah that would work 👍
@@ScottUhlMusic yeah! Thanks.
As long as their no hiss and no cutting in and out its a buy for me.
I own 2 Bose s pro speakers can I use these to pair them get rid of wire so I can make wireless thanks
These will work with anything that accepts xlr 👍 just remember they are cheap, so don’t plan to use a lot of wireless all at once
I have 3 vocal mics, do you think the Lekaton would be a nice solution ?
The more wireless, the less you want to go cheap. I suggest watching this video: Choosing the Right WIRELESS SYSTEM - A Comprehensive Guide
ua-cam.com/video/Xi2JcMomjQ0/v-deo.html
My suggestion would be 2 lekato and 1 Alto, but again, these are budget wireless. I recommend watching that video 👍
for me I heard a huge difference in the Diginow... i'd personally avoid that one... the rest were very similar, #7 was a little noisy but not as much as 8....
Yeah that super cheap one wasn’t great
Can the Kimafun or Lekato be used with a Behringer P1 in ear monitoring system?
Yes 👍
🤔 so you think adapters might not work with these? I need to test them. What about pioneer VM 80s? Noth dj and studio monitors? 😊
You never know… my experience with cheap wireless gear is sometimes it works with your setup, sometimes it doesn’t.
I use Joyos that look exactly like those Lekato ones
Yup they basically the same
Purchased the alto stealth. Honestly it failed me multiple times. For the price I wouldn’t buy it again. The transmitter and receiver have to be within 15 feet and clear line of sight. If not there is drop out. I also don’t like that you need to change the channel manually on each device. Very inconvenient as a mobile DJ
That’s definitely frustrating. But also not my results. Thats because it ALWAYS depends on the environment you are playing in. Where you played, you need a wider tuning bandwidth and the cheap stuff doesn’t offer that. My advice is to always have a backup, or get two of these on different frequencies, or spend the money on higher end gear 👍
I purchased the ones with antennas after watching this and it was ok at low volume then when I turned it up all bad distortion
That can happen with cheap stuff with some setups. That is the risk with cheap. Mine works great. Not everyone will have that result with their specific gear
@@ScottUhlMusic agreed thank you!
Thanks. Are these still legal per the FCC?
You need to look at the laws in your country. All of these are good in USA and 2.4ghz is allowed everywhere
@@ScottUhlMusic Thanks a lot. I am in the USA. I want to use these with my over-the-ear or head-worn with an attached "next to the ear" monitor. I would attach them via the cord they come with and put the transmitter in my pocket. Should I expect problems executing that idea.
I like the alto with the replaceable battery the most. I don’t like needing 2 units if a battery is dead
You could also just have extra batteries too if you need it for more than 3.5-4 hours 👍
So I’m a singer in a band and have always sung through a wired 58 or many years ago a Samson wireless with 58 mics. Would you put you money into the Lekato or the PhenyxPro PTU7000a. Why did you not use the PhenyxPro with your partner if you rate it so highly. Is the PhenyxPro not suitable for lead vocal singing consistently? Incredible videos. Keep me from sleeping as sound porn can only be watched when wife is asleep
The Phenyx pro wireless mics are great! But they aren’t as portable as the lekato adapter. When we travel, I like to bring the lekato for her mic and then I usually just wire my mic. That’s just me for the travel rig that can fit in my backpack
@@ScottUhlMusic so I could use the PhenyxPro as a lead vocal for a pub/function band ? Also do all 4 mic volumes get set on the receiver and then a single line out of that mix goes to the mixer. Forgive my incorrect terms I’ve come back to lead singing after 20 years of musical theatre and the tech is staggering.
Be great to hear your thoughts
@scottuhlmusic - any thoughts on the PhenyxPro for lead vocals ?
Can the Kimafun units be powered continuously via USB like the Alto's?
I believe so, yes
Thanks for responding. Last question...all of transmitters/receivers for all units "need" to be line of sight? Are there any you'd recommend if line of sight is not logistically feasible?@@ScottUhlMusic
If line of sight is not possible you 100% should NOT be using cheap ones like this. It can work sometimes, but line of sight is always best with any wireless. But if you cannot get line of sight, getting higher end wireless is important. I recommend watching this video; ua-cam.com/video/Xgw96rY4TAc/v-deo.htmlsi=m5Nx3-_TSr-RkUqu
Does anyone know if the Lekato MW1 and the Joyo MW1 are the exact same thing? The look identical.
Yeah they are basically the exact same
I make a query. What happens when the battery, which is internal, reduces its performance. Should I buy another equipment or is it replaced? Previous systems run on removable batteries. I await your comments. greetings
Once the internal battery dies, you have to replace the unit (unless you know how to get the battery out). That’s okay to me at this price point
Legato one have you used more than one at a gig?
I’ve used that one constantly. Probably 75 gifs now between me and my singer (who also has one). It’s an extremely reliable unit
Can lekato 5.8 compatible for sennheiser e945 dynamic microphone?
The “doesn’t work with xyz mic/system” I go over in this video: What Is The BEST CHEAP WIRELESS SYSTEM - Part III
ua-cam.com/video/xRmmgrQoHZU/v-deo.html
That’s specifically about cheap guitar wireless, but the idea is still the same for cheap xlr adapters
I mean this lekato 5.8 compatible with any dynamic microphone like mine sennheiser e945 or just for shure sm58?
Works whit all dynamic mic no condensser