Hey kyle for your cooling system needs you should run distilled water to remove the minerals from the water...also get some stuff called water wetter. Should take care your issues and water wetter still is safe for the track.
Correct distilled water + coolant. Coolant and or water wetter has anti corrosion properties. Surprised both Brent and Kyle didn't know that as its common beginner knowledge.
That is correct. Tap water has impurities which then turn to gunk together with the Coolant ... Easiest is just flush once or twice and fill with straight 50/50 Premixed coolant .
I'd love to see that but after all we went through to get him in that shop in Colorado I'd be super sad to see it go. Many OG members helped pay for that place when he got kicked out of the OG tuning spot.
@@uurkisme Still remember that like it was yesterday too it's wild how far they came. I've never given money to any influencer or anyone online I didn't know but when I saw that video kyle posted about brent losing his shop I didn't hesitate to donate and it was so damn worth it all the content that came outa that shop was huuuuge for the come up of the boostedboiz.
I'm pretty sure it had like half of the compression it should have. If anyone knows the stroke and compression ratio we could find out how low on compression it was.
Just after watching the first 7 minutes I can tell this is one of the best vids on the channel . When 2 friends start to wrench late into the night for the fun of it, that says a lot. And the dynamic between you guys gives off huge friendly, funny fam vibes. So good to watch
This brings back memories. I’ve been watching both PFI and you guys since they were in the other shop. I remember when you and Brent hopped in the hatch, drove to Florida, beat the hell out of it, and then drove back to Colorado. Always good to see you two together.
I was wondering if someone used well water to fill the car at some point cause regular city water is filtered and wouldn't cause that unlike well water which is filled with minerals.
Man Brent is such an awesome friend. Karmas real! I wouldn’t be surprised to watch a pfi vid and a bunch of homies appear out of no where to help him out in a time of need
The distinct difference between the relationship Kyle has with Brent and other people who are on UA-cam is that There is genuine love and respect between them as family. Having grown together in the public eye is just a little part of the story and it is what really sets them above the rest. A real bond is so strong and fricken awesome. True family
Assuming it was a 10-1 engine from factory (came in many configurations so just picking a number as an example) the bore volume is 539.18cc and with the 10-1 makes the combustion chamber approx 53.918cc, add the extra 2mm of volume (11.89cc) to the combustion chamber (11.89+53.918) equals 65.808cc for the corrected combustion chamber with shorter rods. Re calculating compression ration of a cylindar volume 539.18cc to the corrected combustion chamber of 65.808cc you get about a 8.193-1 compression ratio. All numbers based on approximate assumptions but close enough to make the point of what 2mm difference in piston TDC height can make to compression ratio. Increasing from 8.2-1 to 10-1 will be very noticable as far as power figures go!!! Great success
Great breakdown and calculations but no two motors were the same because even at the factory during assembly those numbers could be off by so many thousandths but still be within their tolerance specs so it’s hard to say an exact calculation unless stripped brand new and running the numbers/tolerances
Im glad you got to step back and watch your old content. that stuff is why a lot of us OG's came to the channel back in the day. Its been one hell of a ride and im glad the hatch is still herself
Brent has worked on it many times many years and it'll always be reliable that extra 4.3 mm on the stoke is gonna make it a rocket ship even more than before!! Lets gooooooo!! Brent and Kyle team awesome sauce!!!!! Brent needs to be onsite when it runs down the track mans a magician when it comes to hondas.
As much as Brent has done for you and Cleetus, you 2 should get together and get PFI to 1 million subs. If anyone deserves it, Brent does. His support and work was key to you and your channel.
I think Brent is an awesome human. But once you've seen 12 honda dyno sessions, it just gets boring. The channel won't grow unless other cooler things get mixed in
@@gt1man931 are you serious where have tou been the past 2 years??? Those videos basically stopped when the EPA went after brent for using hondata. He has been out and about raceweeks, florida, clay, cleetus all that. Just this month the only dyno video brent made was of an NHRA topfuel dragster and he wasnt tuning! Give PFI another shot i bet you wont regret it! And to add to that brent has a shop and crew to maintain on a way lower budget than alot of these dude so if his follower count goes up so will his freedom to make content other than just make the bills
Love seeing you guys together banging out a project. The only thing i would like to see more is getting Brent to 1 Million subscribers. This man gives his all. From helping out all of his friends to just giving that patented positive vibe. Love the content from both of you guys and wish you the best in life for you and your family. To the moon tune.🤣
That scared the shit outta me when you cut to the lift coming down in fwd on top of Brent!!! Don’t hurt my favorite person!! lol great to see you guys kicking it wrenching
Happy to see the hatch getting the love and care it needed. Its sharp! Man that things going to be fast now! Good seeing brent and you doing things together like old times. Made me go back and watch the old hatch videos 📹 awesome.
Loving the OG cars but we need you to get that Prelude 8 sec pass!!! You already have the first minivan in the 9s, first NSX in the 8s, and first mr2 in the 7s, and others i think so 1 more cant hurt! Those h22 rods just gave you a 1.7mm more travel to the head lol
Can't belive how you've come Kyle, I remember the og days working on wago in your garage and the Chinese turbo you first bought on the build. Keep it up man
He's gone feral for sure he was wearing Clay Milligan's jocks yeah ask no questions there. Then he shows up and announces to UA-cam that he's Trans Where will show up next ?????
Hey Kyle i see that you are still using the heater on the hatch, maybe the heater radiator under the dash it's corroding the coolant system. Greetings from Argentina
Hope to see the Hatch run soon. You may need to take out some ignition timing at the ignition map under boost conditions since the compression ratio is a lot higher now to prevent detonations and head gasket issues.
I had the same rust issue with my low mile S2000. I figured its attributed to the sleeves. Even though the block itself is aluminum they still use ductile iron or steel sleeves that can form rust in the water jackets around each cylinder especially if you don't change coolant for many years or run straight water as you do. Mine was so bad it clogged my heater core. I managed to clean it all out by dumping in some CLR (Calcium, Lime, Rust remover) letting it sit overnight and back-flushing the coolant system with a garden hose. Since you use straight water, you should look into using water wetter to keep from forming new corrosion.
Yeah lol, and a good girl 5:50 the trans is bit is at 5:57 Kyle also said he is uncomfortable with those.....rods at 2:20 If we want to play spot the frasing.
Brent is truly such a great person always got a smile on his face always has something nice to say he is really one of the best influencers I have ever seen on UA-cam maybe even the greatest UA-cam he has the best attitude the best Spirit.props to you Brent!!!!!!
It’s absolutely wild how long ago yall put that h22 together. I remember watching those videos in the og garage and then yall doing the exhaust cutout controlled by the cruise control button! Have loved every bit of content and I can’t wait to see what else this year brings!
Please make a playlist with all of the different builds. Been watching since it was only Wago and the Hatch. Would love to be able to go back and rewatch stuff, and for all the new fans who joined along the way can be able to go back watch the full list on their favorite car from your channel. No matter what, love the content. Stay boosted ^_^
I'm not surprised he wanted to build the motor in the car. I had the honor of shaking his hand in Houston at the raceway before it closed years ago. Dude is as real as they get. There is no man that is more a car enthusiast than Brent.
I’ve been a loyal subscriber since December of 2017 and it’s amazing how far you’ve come Kyle. I can remember even when you took your mom’s car out drifting and doing donuts in the snow and it broke lol. One of my favorite videos is the one where you get I think your dads reaction to a pull in the hatch and he’s like “I don’t have that many years left to live” and you told him well no better way to spend them than to spend em in a race car lol 😂 now look at you! Crazy how far you’ve come and I always look for your videos on UA-cam and get excited when a new one posts. Always the first thing I watch and look for every single time. Love you brother keep up the great work! 💪🏽 💯
Hell yeah so cool to see the hatch back to life with that H22 which reminds me pls bring back the prelude and start rebuilding her motor get that dinasour back to life!!
“I identify as a trans”!? 😂🤣☠️ That’s freaking hilarious, man I wish Brent was always on the channel with you and Wyatt
As a trans person I endorse this joke
He got me there but then again when he said he identified as H22 😂
Brent’s an Nsx-ual
@@fast97z24he’s been saving those jokes since the gravel driveway days 😂
@@ambirbtruckdriver 🫡 We all thank you for endorsing and taking a joke!
Hey kyle for your cooling system needs you should run distilled water to remove the minerals from the water...also get some stuff called water wetter. Should take care your issues and water wetter still is safe for the track.
Water wetter only adds a degree or so improvement
Correct distilled water + coolant. Coolant and or water wetter has anti corrosion properties. Surprised both Brent and Kyle didn't know that as its common beginner knowledge.
That is correct. Tap water has impurities which then turn to gunk together with the Coolant ...
Easiest is just flush once or twice and fill with straight 50/50 Premixed coolant .
Brent needs to just make the move to Florida!! He looks so happy there.
I'd love to see that but after all we went through to get him in that shop in Colorado I'd be super sad to see it go. Many OG members helped pay for that place when he got kicked out of the OG tuning spot.
Living in Florida sucks.
would be nice but id imagine moving his family and his business would be alot to think about
@@uurkisme Still remember that like it was yesterday too it's wild how far they came. I've never given money to any influencer or anyone online I didn't know but when I saw that video kyle posted about brent losing his shop I didn't hesitate to donate and it was so damn worth it all the content that came outa that shop was huuuuge for the come up of the boostedboiz.
@@stuwest3653visiting anywhere but Denver, is advised.
Everybody loves Brent! Dude is the best!
Those h23 rods could be the reason the hatch has held together so long...down on compression keeping the cylinder pressures low lol
100%
Agreed. First thing that came to mind lol
I was thinking the same thing. Might've been why that engine was so reliable all these years
Literally came to the comments to see if anyone thought the same thing!
I'm pretty sure it had like half of the compression it should have. If anyone knows the stroke and compression ratio we could find out how low on compression it was.
Just after watching the first 7 minutes I can tell this is one of the best vids on the channel . When 2 friends start to wrench late into the night for the fun of it, that says a lot. And the dynamic between you guys gives off huge friendly, funny fam vibes. So good to watch
This brings back memories. I’ve been watching both PFI and you guys since they were in the other shop. I remember when you and Brent hopped in the hatch, drove to Florida, beat the hell out of it, and then drove back to Colorado. Always good to see you two together.
The OG shop lmao. They had such a blast there. Kinda glad it worked out how it did though. Can't nobody tell Brent shit but the EPA now 😂
With that crazy hood exit lmao
Wasn't that when it broken into the 9s as well? That video was definitely one of my favorites next to Vicky.
You answered your own question! The hose water has minerals in it. Such as iron which will rust.
Jinkees!
I was wondering if someone used well water to fill the car at some point cause regular city water is filtered and wouldn't cause that unlike well water which is filled with minerals.
Use the distilled water and water wetter keeps all that to a minimum.. cheap fix.
gota use that Redline Water Wetter, adds anti rust, cools better and tracks allow it.
Brent just continuing his journey of “Where’s Waldo?” appearing in another UA-cam video. Dude just love helping his buddies.
Man Brent is such an awesome friend. Karmas real! I wouldn’t be surprised to watch a pfi vid and a bunch of homies appear out of no where to help him out in a time of need
I was just thinking I hope all these UA-cam dudes are paying this man. They are clearly past the need for free help from a friend.
YES!!!! I love when you and Brent are working together. The best combo in my opinion. Love pfi and boosted boi'z.
The distinct difference between the relationship Kyle has with Brent and other people who are on UA-cam is that There is genuine love and respect between them as family. Having grown together in the public eye is just a little part of the story and it is what really sets them above the rest. A real bond is so strong and fricken awesome. True family
Assuming it was a 10-1 engine from factory (came in many configurations so just picking a number as an example) the bore volume is 539.18cc and with the 10-1 makes the combustion chamber approx 53.918cc, add the extra 2mm of volume (11.89cc) to the combustion chamber (11.89+53.918) equals 65.808cc for the corrected combustion chamber with shorter rods. Re calculating compression ration of a cylindar volume 539.18cc to the corrected combustion chamber of 65.808cc you get about a 8.193-1 compression ratio.
All numbers based on approximate assumptions but close enough to make the point of what 2mm difference in piston TDC height can make to compression ratio.
Increasing from 8.2-1 to 10-1 will be very noticable as far as power figures go!!!
Great success
Great breakdown and calculations but no two motors were the same because even at the factory during assembly those numbers could be off by so many thousandths but still be within their tolerance specs so it’s hard to say an exact calculation unless stripped brand new and running the numbers/tolerances
Brent can outwork any man with the biggest smile on his face. Your the man Brent!
Brent just seems like such a solid dude! Good vibes and positive energy! Great video thank you!
Brent is the Best. Such a shining light of positivity.
Brent is and has always been the realest. That man is a walking living embodiment of what being humble is.
except when it comes to forgetting torque on the rod bolts "I've never done that." 😆
love seeing brent in the videos, glad to see the hatch getting some love again.
So much old school vibe goodness in this video. Crazy about the rods being different haha.
Bro Brent, you are just being a mad man. I'm so happy to see you in the video with Kyle. You guys already have me laughing.
Im glad you got to step back and watch your old content. that stuff is why a lot of us OG's came to the channel back in the day. Its been one hell of a ride and im glad the hatch is still herself
Lower compression is probably why it ran so long..
That’s what I was thinking less stress
No, because it had h beams and its a honda
Brent is an absolute gem!!! LOVE that guy
I don't know if you (Kyle) noticed or not but I want to point out that the rear diff is not locked, only the driver side was pulling.
Came to say the same thing
I saw that, too
i came to say the same thing as well lol. only seen the driver rear spinning lol
It's an open differential...
Still learning about the AWD swap on Hondas. But if this is true, could they not just weld up the spider gears?@@Drunk3nMas7er
Love ya Brent, keep being yourself brother!
We, the OG's, Appreciate you.
A video with Kyle , Brent and the hatch… nothing better!
Brent is one of the most genuine/loving guy on UA-cam. So glad you got to work together for this video.
Brent has been in every channels video on UA-cam the last couple weeks 😂😂
Not wrong!
Love it!
Kyle and Brent dyno tuning the hatch is the first video i ever watched of Kyle's. This gave me good vibes.
I cannot tell you how many times I replayed 6:00 🤣 Brent actually laughing and making Kyle actually laugh as well was genuinely funny as shit 😂👌🏼
Bro truth hhahaha
Brent has worked on it many times many years and it'll always be reliable that extra 4.3 mm on the stoke is gonna make it a rocket ship even more than before!! Lets gooooooo!! Brent and Kyle team awesome sauce!!!!! Brent needs to be onsite when it runs down the track mans a magician when it comes to hondas.
Day 224 bring back the Honda prelude 😢. I’m watch the video after i wash these dishes😂
I hope they bring the prelude back
Dishes suck but they gotta get done some how 😘
I'm coming for that pralude record this year
Bro same here dang dishes
Wash dem there dishes boi 😁
As much as Brent has done for you and Cleetus, you 2 should get together and get PFI to 1 million subs. If anyone deserves it, Brent does. His support and work was key to you and your channel.
Man, it was awesome seeing Brent and Kyle work together. On the Hatch, too.
Always good to see you and Brent working together. Looking forward to some good rips in the hatch.
Brent has been in Florida so long now he's officially a Florida man now
Brent the kinda friend you have for life!! Such a positive beast full of knowledge and laughter!! Guy jus has serious try hard and can do attitude 💪🤘
Lets go!!!! Lets get Brent PFI to 1 million!!!!!
I think Brent is an awesome human. But once you've seen 12 honda dyno sessions, it just gets boring. The channel won't grow unless other cooler things get mixed in
@@gt1man931 are you serious where have tou been the past 2 years??? Those videos basically stopped when the EPA went after brent for using hondata. He has been out and about raceweeks, florida, clay, cleetus all that. Just this month the only dyno video brent made was of an NHRA topfuel dragster and he wasnt tuning! Give PFI another shot i bet you wont regret it! And to add to that brent has a shop and crew to maintain on a way lower budget than alot of these dude so if his follower count goes up so will his freedom to make content other than just make the bills
Love seeing you guys together banging out a project. The only thing i would like to see more is getting Brent to 1 Million subscribers. This man gives his all. From helping out all of his friends to just giving that patented positive vibe. Love the content from both of you guys and wish you the best in life for you and your family. To the moon tune.🤣
That scared the shit outta me when you cut to the lift coming down in fwd on top of Brent!!! Don’t hurt my favorite person!! lol great to see you guys kicking it wrenching
No doubt! Bad timing to go into fast forward!
Happy to see the hatch getting the love and care it needed. Its sharp! Man that things going to be fast now! Good seeing brent and you doing things together like old times. Made me go back and watch the old hatch videos 📹 awesome.
Loving the OG cars but we need you to get that Prelude 8 sec pass!!! You already have the first minivan in the 9s, first NSX in the 8s, and first mr2 in the 7s, and others i think so 1 more cant hurt! Those h22 rods just gave you a 1.7mm more travel to the head lol
Love to see Brent show up, Met him in Colorado when I popped in unannounced.. He and Shane were awesome people.
Refreshing to hear non PC jokes. Love the duo.
Can't belive how you've come Kyle, I remember the og days working on wago in your garage and the Chinese turbo you first bought on the build. Keep it up man
Brent is like a lost puppy. Jost doing the rounds and getting fed, watered and scrached along the way.
He's gone feral for sure he was wearing Clay Milligan's jocks yeah ask no questions there. Then he shows up and announces to UA-cam that he's Trans
Where will show up next ?????
Friends like brent and wyatt is awesome, super cool to have a friendship like that this day and age. Genuinely good people! Hatch is gonna ripp!
Love the content I always look forward to when y’all post
Man, it’s so good to see you and Brent wrenching on the hatch together. I wish PFI would transplant to Florida as well!!
The trans joke was Gold 😂😂😂
Damn i love seeing Brent in Florida! So glad i found you guys on YT like 3 or 4 years ago...non stop entertainment and information.
Let's go, love to see some hatch content.
I love brent. Absolute legend to the sport and truely happy all the time. I dont think ive ever seen brent without a smile on his face
Brent is frickin hilarious. Always puts a smile on my face.
Hey Kyle i see that you are still using the heater on the hatch, maybe the heater radiator under the dash it's corroding the coolant system. Greetings from Argentina
well dam kyle no wonder the engine lasted long lol thats funny
Hope to see the Hatch run soon. You may need to take out some ignition timing at the ignition map under boost conditions since the compression ratio is a lot higher now to prevent detonations and head gasket issues.
Lets go baby the hatch is back
I had the same rust issue with my low mile S2000. I figured its attributed to the sleeves. Even though the block itself is aluminum they still use ductile iron or steel sleeves that can form rust in the water jackets around each cylinder especially if you don't change coolant for many years or run straight water as you do. Mine was so bad it clogged my heater core. I managed to clean it all out by dumping in some CLR (Calcium, Lime, Rust remover) letting it sit overnight and back-flushing the coolant system with a garden hose. Since you use straight water, you should look into using water wetter to keep from forming new corrosion.
Brent @5:58 absolutely killed me! That had me dying laughing!
Awesome man! Finally some good old Honda stuff!
Some very familiar vibes in this video! ❤
Brent is such an awesome Human. Love to seeing him on the channel. Prelude needs some love next!
Love the videos man!
Brent, you are an inspiration to us all brother. The raddest of them all.
He said I identify as trans lol 😂
Yeah lol, and a good girl 5:50
the trans is bit is at 5:57
Kyle also said he is uncomfortable with those.....rods at 2:20
If we want to play spot the frasing.
@@cajampait was a joke you have a dirty mind
Brent is truly such a great person always got a smile on his face always has something nice to say he is really one of the best influencers I have ever seen on UA-cam maybe even the greatest UA-cam he has the best attitude the best Spirit.props to you Brent!!!!!!
Turbo the Smart car !!!
You should get another lift in the shop. For storage or you can have it for longer projects.
His pronouns are forwards and backwards lmao
Great seeing you two together working on the ol hatch. Lets see that 8.5 bby!!!!
It’s absolutely wild how long ago yall put that h22 together. I remember watching those videos in the og garage and then yall doing the exhaust cutout controlled by the cruise control button! Have loved every bit of content and I can’t wait to see what else this year brings!
Glad to see you and Brent together wrenching on cars man, reminds me of when I first subscribed to your channel
Brent is such a humble guy. Always enjoy seeing him in your videos.
Brent is the best out there, glad to see you guys hanging out
Love it when you and Brent working together. Its like father and son. Without brent, boostedboiz would not be as it is today
Clicked so fast to see yet progress again on the car that brought me to this channel years ago , let's go!🔥
Please make a playlist with all of the different builds. Been watching since it was only Wago and the Hatch. Would love to be able to go back and rewatch stuff, and for all the new fans who joined along the way can be able to go back watch the full list on their favorite car from your channel.
No matter what, love the content. Stay boosted ^_^
Brent is such a legend. Such a kind soul.
Love the content with Brent, like 2 buddies just having a good time. Nice work….
always nice to see brent! such a great guy. ready for more hatch content
I love the Kyle Brent Combo on this video, love both you guys keep up the great content and hope the Hatch makes it to Street Car Takeover.
The boys working on the hatch they make it look so easy love it those hands are blessed
Loving having Brent back.. what a man!
Brent literally makes me happy as a car guy! Best human being there is!
Great to see you two working together again !!
Seeing these two legends back together is wonderful
I'm not surprised he wanted to build the motor in the car. I had the honor of shaking his hand in Houston at the raceway before it closed years ago. Dude is as real as they get. There is no man that is more a car enthusiast than Brent.
Brent is the purest soul. Nothing can change my mind on that.
I’ve been a loyal subscriber since December of 2017 and it’s amazing how far you’ve come Kyle. I can remember even when you took your mom’s car out drifting and doing donuts in the snow and it broke lol. One of my favorite videos is the one where you get I think your dads reaction to a pull in the hatch and he’s like “I don’t have that many years left to live” and you told him well no better way to spend them than to spend em in a race car lol 😂 now look at you! Crazy how far you’ve come and I always look for your videos on UA-cam and get excited when a new one posts. Always the first thing I watch and look for every single time. Love you brother keep up the great work! 💪🏽 💯
Brent is the best! Big props OG. ALWAYS crushing it for the BOIZ
Glad to see the hatch back!!! Og of the channel is alive again!
We need Brent more in boosted bois videos it reminds me of why i feel in love with this channel you guys all hanging out just like old times.
Love to see Brent in every single video, his vibe is unique.
Hell yeah so cool to see the hatch back to life with that H22 which reminds me pls bring back the prelude and start rebuilding her motor get that dinasour back to life!!
Man I sure do miss these videos with you and Brent together!!! There were multiple times in this video where I was laughing!
5:57 i rolled out of my bed laughing so hard lmmfao its awesome to see kyle and brent working on a motor again
You built that h22 back in 2017 that is infact how I found your channel and haven't missed a single video since! OG sub here LOL
Love the energy of Brent he’s always smiling even from back in the day
I absolutely love your videos! I get excited every time you upload 💪🏼🤘🏼
Oh man the flashback from the old garage made me smile good times great memories!