@boostedboiz Downstar makes weldable shock tower raisers makes it taller to prevent that control arm hitting problem should check that out before gettting it painted
Sorry about the hatch, time for some Ferrera valves when they drop they don't smash the pistons, just flatten out. Also Very Happy you are staying H, og sub here who has my own boosted H after following your build.❤
Hell yeah brother, one thing I would be interested in and I'm A og subscriber because you was one of the few people that was making the kind of content that I was doing and been a long story short, one thing that I would be interested in seeing y'all do would be your teaming up with S1 build to do a all-wheel drive MR2 Mid Engine k-series or H or B series engines or j lol but that's what I have seen done yet!!!!
See you soon! You’ve got it in great shape for me to take it and run with it. Unfortunate way to start the week but like you said it’ll be better than ever!
Bode for the win. I loved the hatch series, weld almost all the holes up, and minimize wiring, but keep lights and signals to keep it street car. Gotta be street ready for those rips in Mexico
I think that car deserve the best Kyle, that car is why we started listening and getting involved in your builds. The Hatch is legendary at this point, she needs the best.
Turns out having those H23 rods in there probably were saving this motor. Now that you've got full Rod stroke with the proper H22 Rods your Piston met your Valves under valvefloat from banging it off the limiter. Maybe lower the Compression ratio for the new motor? Good luck bud!
I was thinking the same thing. Those shorter rods may have been a blessing in disguise - or potentially a curse in hiding the valve issue. Depends on how you look at it.
@@fast97z24 The H23 Rods made it so that the Piston never went to the top of its Bore, leaving a gap. That dramatically reduces the Compression ratio. Compression ratio is the volume/pressure of air at BDC vs TDC inside the cylinder bore. If the Piston never reaches the top of its Bore then it can't compress the air/fuel as much, thus lower compression. This could be replicated with the H22 rods and a Dished Piston. Instead he chooses to run high compression turbo on his stuff, rev it to the Moon, get valve float, and blow motors.
someone mentioned in the video when you rebuilt the engine that they figured the main reason for the engine in the hatch lasting so long was the fact that it had the slightly shorter rods with a lower compression ratio. It very well could’ve been something else to cause the engine to let go, but it seems extremely coincidental, but also logical to come to the conclusion that that’s what could’ve contributed to it
That's exactly what I was looking through the comment section to find. I already thought it through in my head and predicted that the hatch was going to immediately blow up. It would have lasted for ever it's too bad
The humility and the willingness to recognize his own oversights without projecting anger towards others is what makes Kyle awesome. Thanks for sharing that moment with us
Something has to be going on in Kyle's life because he said he was going to be back to posting and this video is already a week old Hope everything is okay and it gets back to normal
If you end up needing another spare head to keep on hand, I've got one that needs a slight resurface. It's a complete head with valvetrain, cams and everything. Free if you want it. I'm in Jacksonville, but I travel to Orlando and Tampa a lot for work so just lmk if you want to set something up to grab it. Looking forward to seeing the hatch back up and running. I'm in a similar situation. Bought another engine and in the meantime, i'm respraying my engine bay and collecting a bunch of supporting upgrades for the visual presentation of the bay.
No it’s time to ditch the H unfortunately. He should just put a built B in it. The platform is much more figured out. Bring back the Prelude for our dose of H content 👌🏻
@@onefastslimjimyeah dude it’s a civic 😂 not much variance there lol. H series still only has half the support of the rest of the motors. With the hatch being awd and actually getting serious now it’s would only make to go bseries. It’s not a 500hp street beater anymore man.
@@alext4234oh I know man but it really would only make the car better. That’s why I said let’s get the Prelude back and then we can still have lots of H content!
Its crazy Kyle goes through so many engines lol I have been beating the hell out of my boosted D16z6 for over 7 years now and I have only gone through transmissions.. Knock on wood 😆
I love the vibe of this video, Takes me back to the garage days. I remember the piston melting and finding the injector wiring being the problem with you bro, I don't think many can say that. Never stop being yourself Kyle it's why we are all here. You too Witt
Started watching BodeVison since the first time you sent the hatch to him, glad to see you getting the bay painted and then finishing off the rest to make it complete.
Strut tower extensions . Brake booster delete and a 1" itr master. As a 3 point strut bar as a refresh to the engine bay of the ek hatch.. For upper control arms there are other options in the marke. Hardrace comes to mind as an alternative Finally seeing you are refreshing the head. Skunk2 pro cams is a nice edition Great build and a watched this hard being built from when you were in Colorado.. Good luck Goo
Don't sweat it man, remember how many times the hatch blew up or ate a transmission back in the day chasing 9s ? This is nothing in comparison, didn't even have to scavenge for parts in a freezing Colorado junkyard 😂
They don't need money so they don't need views atm. He said sorry for not uploading than disappears for another week 😂 Meanwhile cleetus is having kids, and can still upload.
Lolol at Kyle starting the video off with a raycon ad right in front of the hatch. Translation "hey guys I blew my civic up again and I need to do this ad so I can buy more engine parts for my civic so please use my promo code" lolool thats real comedy
Aww man I feel your pain, my timing belt just tore on my VW ALH TDI and smashed all my valves. But it is going back together with compound turbos and a few more upgrades.
There really is nothing like your first car I fixed everything on my old wrangler and it was finally mechanically perfect than the frame rusted through and I got rid of it The hatch is gonna be better than it ever was!
Bruh! Build the whole car and make it a competitor like Aaron Lopez! I’m from SA where Aaron is from and want to see a continuation of the main car…where the channel began! She deserves it Kyle 💯 Like my wife’s says with me! Lot of my cars get jealous and just wants the attention as all the other cars
Go to buyraycon.com/boostedboiz for 20% off your order, plus free shipping! Brought to you by Raycon.
@boostedboiz Downstar makes weldable shock tower raisers makes it taller to prevent that control arm hitting problem should check that out before gettting it painted
Sorry about the hatch, time for some Ferrera valves when they drop they don't smash the pistons, just flatten out. Also Very Happy you are staying H, og sub here who has my own boosted H after following your build.❤
To be fair, it really was an accurate representation of your average Honda owner at 3am
OH NOOOOO, how much diet did you do to make the retained valve go away? :/ support from France
Hell yeah brother, one thing I would be interested in and I'm A og subscriber because you was one of the few people that was making the kind of content that I was doing and been a long story short, one thing that I would be interested in seeing y'all do would be your teaming up with S1 build to do a all-wheel drive MR2 Mid Engine k-series or H or B series engines or j lol but that's what I have seen done yet!!!!
See what happens when you leave the hatch in the corner. She gets mad and then does something to demand some attention.😂😂
Pretty much like cleeter putting Ruby in the barn. Need some action l!
Pretty much how my H swapped hatch is🤣
Nobody puts Baby in the corner
Definitely sounded like no limiter floated the shit outta those valves
Actually If he'd of left it in the corner it would be fine right now...
Cleetus Voice..."What an Idiot"
💥😆
"unreal dude, unreal"
James... That is less than ideal.
You'll have that on these big jobs
George - whaaaat are you doooiiinnggg, i cant believe you did that….well i can believe it cuz i seen it😂
Sam waxed it anyway!
Awesome to see an OG Boosted Boiz Video - 1st Video: "The Hatch is Back!" 2nd Video: "We Blew up the Hatch"
That Raycon cheque went in the bank and right back out in 20 seconds.
😂Lol
I don't think it even hit the bank... :D
Engine bangs limiter = credit card bangs limiter lol.
@@nomercyinc6783 other places spell things differently believe or not.
The hatch had a heart attack when you actually hit third gear!! 😂
😂😂😂😂😂
LOL 😂😂😂
To be fair, that was exactly what happens at 3am in ghetto civics lol
... When keepin it real goes wrong
Ghetto? Wtf is your problem
@@pastaalalamborghini When keeping it real, gets real.
When you’re trying to make a meme and actually make the meme.. #HGOD
I've been that dude, busted civic in a random place at 3am 😂😂
"Engine Unfixed" needs to be a T-Shirt 🤣🤣🤣
Yes
🤰
Love it
See you soon! You’ve got it in great shape for me to take it and run with it. Unfortunate way to start the week but like you said it’ll be better than ever!
Patina some Colorado rust spots in there 😜
Bodevision for the win !
Bode for the win. I loved the hatch series, weld almost all the holes up, and minimize wiring, but keep lights and signals to keep it street car. Gotta be street ready for those rips in Mexico
Please talk him into getting a 99-00 grill to throw on it while it’s with you lol
Hope he asks you to paint that hood too fr
I think that car deserve the best Kyle, that car is why we started listening and getting involved in your builds. The Hatch is legendary at this point, she needs the best.
I had "it was at the moment he knew, he fkd up" going in my head😂
I had hello darkness my old friend 😂
I had the "they ask you how you are, and you just have to say that you're fine, when you're not really fine" one 😂😂
Turns out having those H23 rods in there probably were saving this motor. Now that you've got full Rod stroke with the proper H22 Rods your Piston met your Valves under valvefloat from banging it off the limiter. Maybe lower the Compression ratio for the new motor? Good luck bud!
Compression isn't the issue. The fact the valves were now much closer to the pistons is what did it. I agree, the way it was before was saving it.
I was thinking the same thing. Those shorter rods may have been a blessing in disguise - or potentially a curse in hiding the valve issue. Depends on how you look at it.
@@fast97z24 The H23 Rods made it so that the Piston never went to the top of its Bore, leaving a gap. That dramatically reduces the Compression ratio. Compression ratio is the volume/pressure of air at BDC vs TDC inside the cylinder bore. If the Piston never reaches the top of its Bore then it can't compress the air/fuel as much, thus lower compression.
This could be replicated with the H22 rods and a Dished Piston. Instead he chooses to run high compression turbo on his stuff, rev it to the Moon, get valve float, and blow motors.
@@balljointfd3s that's dynamic compression ratio. You just described static compression ratio.
Blows engine... long sponsor commercial immediately after 😂
someone mentioned in the video when you rebuilt the engine that they figured the main reason for the engine in the hatch lasting so long was the fact that it had the slightly shorter rods with a lower compression ratio. It very well could’ve been something else to cause the engine to let go, but it seems extremely coincidental, but also logical to come to the conclusion that that’s what could’ve contributed to it
wrong piston to valve clearance.
That's exactly what I was looking through the comment section to find. I already thought it through in my head and predicted that the hatch was going to immediately blow up. It would have lasted for ever it's too bad
This is the reason! Nobody runs Honda! All his friends? Cooper! Said it ! Honda is a 1 run and done!
First thing that popped into my mind was that comment, glad somebody else agrees.
It was floating valves on the limiter. Difference is that tiny bit more clearance on the old rods would allow it.
"hello darkness my old friend" was playing in those raycon's
😂😂😂😂
"they ask you how you are, and you just have to say that you're fine, when you're not really fine"😂
The humility and the willingness to recognize his own oversights without projecting anger towards others is what makes Kyle awesome. Thanks for sharing that moment with us
The shorter rods were probably the reason it lived this long
I'm almost 100% certain that's why it lasted so long and it suddenly blows after they put the correct rods into it? The proof is documented on video.
100%
Something has to be going on in Kyle's life because he said he was going to be back to posting and this video is already a week old Hope everything is okay and it gets back to normal
I have a perfect h22a block you can have for free Kyle. I'm in South Florida if you want it.
If you end up needing another spare head to keep on hand, I've got one that needs a slight resurface. It's a complete head with valvetrain, cams and everything. Free if you want it. I'm in Jacksonville, but I travel to Orlando and Tampa a lot for work so just lmk if you want to set something up to grab it.
Looking forward to seeing the hatch back up and running. I'm in a similar situation. Bought another engine and in the meantime, i'm respraying my engine bay and collecting a bunch of supporting upgrades for the visual presentation of the bay.
"The Hatch blew up! This video is sponsored by.... " lol.
Bro blew up the hatch and is now done with UA-cam.
Time to get the h22a fixed again and finally paint the engine bay it deserves and clean up the entire bay as well! Make it worth it brother
No it’s time to ditch the H unfortunately. He should just put a built B in it. The platform is much more figured out. Bring back the Prelude for our dose of H content 👌🏻
@@BigKekeas awesome that would be, its always been H series since the OG days, would be sad to see it go!
@@BigKeke Hooray, another Civic with a B series. Whoop de doo. 😐
@@onefastslimjimyeah dude it’s a civic 😂 not much variance there lol. H series still only has half the support of the rest of the motors. With the hatch being awd and actually getting serious now it’s would only make to go bseries. It’s not a 500hp street beater anymore man.
@@alext4234oh I know man but it really would only make the car better. That’s why I said let’s get the Prelude back and then we can still have lots of H content!
The hatch is the reason why I have a 700hp h22 civic
Hell yeah I love the way the h sounds. I also think it's time to get the prelude down to Florida and finally go after that record.
Anything Brent works on blows up lol
Even Lassie could have seen that coming! 😮
“What’s that lassie? Kyle is running a low compression tune on a high compression engine?”
“We better go tell him!”
I am glad you are sticking with the H22 in the hatch. You should paint or powder coat the valve cover too!
lmfao "you should paint or powder coat the valve cover too!"
how fucking old are you, 12?
I call that a 90 degree valve seat!
Now that's definitely a "Built for a good time, not a long time" situation right there lol 😅
"Honda Civic drivers at 3am".... You didn't have to make it THAT believable with blowing it up and all... That failed successfully :D
this was my thought exactly!
Its crazy Kyle goes through so many engines lol I have been beating the hell out of my boosted D16z6 for over 7 years now and I have only gone through transmissions.. Knock on wood 😆
@@Shreddylife u run 8's?
@@Forcefed20026's bro, with 379whp 😗
@@Shreddylifeto the 330
I love the vibe of this video, Takes me back to the garage days. I remember the piston melting and finding the injector wiring being the problem with you bro, I don't think many can say that. Never stop being yourself Kyle it's why we are all here. You too Witt
Watched that when it came out, instantly went to my garage to check my injector wiring lol
Started watching BodeVison since the first time you sent the hatch to him, glad to see you getting the bay painted and then finishing off the rest to make it complete.
Strut tower extensions . Brake booster delete and a 1" itr master. As a 3 point strut bar as a refresh to the engine bay of the ek hatch..
For upper control arms there are other options in the marke. Hardrace comes to mind as an alternative
Finally seeing you are refreshing the head. Skunk2 pro cams is a nice edition
Great build and a watched this hard being built from when you were in Colorado..
Good luck
Goo
Don't sweat it man, remember how many times the hatch blew up or ate a transmission back in the day chasing 9s ?
This is nothing in comparison, didn't even have to scavenge for parts in a freezing Colorado junkyard 😂
0:16 at this point you just wanna cry and die inside but you keep it together for the squad 💪
nah, thats the face you make when you know some karen is gonna call the police and you broke down right there lol
@@kevinc7632😂😂
At least you get a little gift back with the opportunity for the bay painted. That helps to peel off the band aid.
Glad you're staying H22 . You're channel as the reason. I bought a Honda prelude 5 years ago . It's fully built and almost turboed now .
Time to give the Hatch the Love and Attention she deserves!!!!❤
Lesson is: Don't have your Rev Limiter set to KILL when you want to bounce it off the Rev Limiter for S#1+S and giggles. 👍🤦♂️😂
Glad to see that you are keeping true to the h22! Lol. Great flying with you over the weekend brotha!
“Honda Civic owners at three in the morning” does a pull and blows it up😂😂
Need more content, where dey at doe lol 😆
They don't need money so they don't need views atm. He said sorry for not uploading than disappears for another week 😂 Meanwhile cleetus is having kids, and can still upload.
I love how Wyatt just starts tearing right into it!
can't wait to see that freshly painted engine bay with the rebuilt engine 😉
At least there's always a dollar General to pull into.
Kyle one year from now. “We’re k swapping the hatch!”
The Prelude has Entered the Chat !!
It brings a slight smile to my face thinking the Civic drivers making all that noise at 3 AM are blowing pistons.
Lolol at Kyle starting the video off with a raycon ad right in front of the hatch. Translation "hey guys I blew my civic up again and I need to do this ad so I can buy more engine parts for my civic so please use my promo code" lolool thats real comedy
Blessing in disguise? Hatch is getting the love it deserves!
Not anymore back to the corner it goes.
Every project has its setbacks good to hear you haven't given up on her
Finally some real Boostedbois content.
these tesla guys .....
Looks like someone's getting a signed beat up piston in their order soon😂🤣😂 i got the last one!!!!
Just typical boostedboiz lifestyle. Y'all know we bounce back!!!
10 years later and it's getting dialed 100%
What's the excuse this time? Cleetus is having kids and still uploading 😂
You temporarily died again bro. This 7 days between videos is not good for the fans we need more content bro 😂
Nine days now
Out here blowing up motors faster than Cleeter😂
Man, what a bummer. I can’t wait to see it restored now though! That’ll be fun to watch.
What’s happening with the content buddy, seems to be getting slower and slower 🤷♀️
Content has kinda fallen off fellas …
Dang, sorry man. Always a bummer when that happens. Might be a blessing in disguise since it's going to be sick when you're done!
The Hatch thought: I will let Kyle give the boyz some more content!!!
Well you did a great job of turning the valves into swirl flaps haha 😂
Been here since the Colorado garage I can't wait to see what the hatch turns into!
nice 2jz motor casually next to the hatch at the end
This makes me soo happy the Hatch is getting what it deserves
Aww man I feel your pain, my timing belt just tore on my VW ALH TDI and smashed all my valves. But it is going back together with compound turbos and a few more upgrades.
Been looking forward to this update... hatch needs the bay done... redone piping... this thing is going to look great...
New Hatch shirt, “Pop the hood. That didn’t sound good”
Appreciate the quick upload brother!❤
Instant regerts 💯
Especially after the oil smoke lol
I have a new found level of respect for Kyle now I know he wears Raycons to bed so to not wake up Wyatt 🤣
It wouldn't be the BoostedBioz if these things didn't happen.. Solid content guys..
“I’m selling this car dude I’m over it “ … the most relatable thing Kyle’s ever said
He can’t build a car for his life lol
Glad to hear you are continuing to improve the hatch, try and keep it under 10,000 rpm.
Welcome to Rebuild town. We missed you. I know it's only been a few days but welcome back.
Did you say new rad and intercooler....can't wait for the 5 part build series 😂
Lmao bro you nailed it perfectly. Love the commitment 🤝
dont forget jesse praised the lord for titanium valve springs! make sure she's set to slam that limiter
thank goodness.... i was getten worried there for a min!!... shew!!!
this is one of those hold my beer situations ya live n ya learn
I believe it when u put it together 😂
That intro's mostly accurate
only usually it's stock internals D15, a fart can and an eBay turbo with about 2/10ths of the power if that :)
There is no hatch without the H!
There really is nothing like your first car I fixed everything on my old wrangler and it was finally mechanically perfect than the frame rusted through and I got rid of it
The hatch is gonna be better than it ever was!
Almost as epic as George throwing the rod out of Rodney
It's been a rough week for a lot of car guys including me. But persistence will pay off in the end and we will prevail! ✊
I know this sucks but I love getting to see you guys tear stuff apart and work on it!
That's a lot of damage! *Phil Swift voice*
I respect that you stick with the H series
But damn i would love to see a B series build on this channel! 😃
Should have used the “you gotta tell you’re fine but youre not” sound
“Not ideal” needs to be a t-shirt!
That valve identifies as a butterfly.
The hatch deserves the love
Honestly, I'm ready to see the rest of the paint work and this car buttoned up on that level.
Over 5 years in without major issues, that engine owes you nothing Kyle!
Bruh! Build the whole car and make it a competitor like Aaron Lopez! I’m from SA where Aaron is from and want to see a continuation of the main car…where the channel began! She deserves it Kyle 💯
Like my wife’s says with me! Lot of my cars get jealous and just wants the attention as all the other cars
Kyle bro u have reached the limits in lotta Honda engines n lotta Honda parts , shows how far u can take a h22 , oG watchers wanna see that