For anybody doing this at home I would recommend adding some pvc glue on the inside of the pvc before clamping it flat, this would help hold it down when you reheat it and just generally strengthen the bow.
Make Detanator Bolts *Exploded When pressured much* Ingredients SD Alcohol 40-B Fragrance Black powder (From Fireworks) Ethyal Acid 70% (Burning power) If 80+ it will explode much like a granade Most important use the lighter striker from the end of the lighter Connect it to the black powder for Detanating the other ingredients
since you have a band saw, one suggestion i'd make to get more consistent bows from pvc would be to cut out a wooden form form a 2x4. both halves can be clamped onto the bow at the same time forcing the plastic into the proper shape.
Cool project but its quite expensive because i have to buy following items: Chop saw Bandsaw Belt sander Vice Heat gun(unless i can use a hair dryer) Drill and right size drill bits + All the materials used for the actual crossbow
You can pre stretch it if you mesure out the exact length you need. Thats what we do for compound string. Put it under tension with a ratchet strap over night and that should remove most stretching. Do a practice run before to see how much it stretch.
I'm doing a school project on why the crossbow was the best medieval ranged weapon. Our presentations were canceled because of quarantine but I'm still making one on my own time.
great video! i did make PVC long bow. instead wasting time for the PVC to cool off, splash some cold water and continue to the next section. thanks, i like the crossbow. i may use s thick teflon knife board to get it even lighter or sandwich two together. wood tend to warp in time; substitute PVC with thin teflon cutting board for the bow in two separate bow section. you have great idea for my crossbow refindment.
When I was about 10 years old my dad made me a crossbow and I used pegs as ammo, u know the stuff u hang washing out with. Anyway I was playing with it in the street when my neighbors son came out and started throwing rocks at me. I shot a peg at him and hit his leg the peg went so slow and wouldn't have hurt at all. 20 minuets later the police were at my door saying there was a report that a man was out shooting kids with a hunting crossbow. Like wtf I was 10 years old and the thing shot blunt pegs
A couple criticisms about the bow design: - Bows work better if they're stiffer near the center and more flexible on the limbs. For PVC bows this is commonly done by leaving the center less or not compressed, tapering to full compression at the tips. This will also increase the draw weight without needing the secondary bow. With even flexibility the bow will bend mostly at the center. - Those mounting holes look like a stress concentrator. Cord wrapped around the bow can attach it without these holes. - Angling the bow to reduce bowstring being pulled down against the stock can improve performance.
Time flies like an arrow. Fruit flies like a banana.
lol
GuardedDig2 what
Felipe Carrasco its a pun
you mean fruit flies, as in the insects? just want to make sure.
captain awesome 5000 yes
I love how much simpler these builds are
Yea me too
DST is that sarcastic?
the arrows are called bolts
Yeah I cam to the comments to see if someone noticet to
It can be called both
the feathers are called flights....
the sky called blue.
Small things amuse small minds except for those that think big. Like a cross bow taking down a dinosaur. 😜
Bow Bolts ... seems better
"I'm Gonna Smash This Down Until I Can't Smash It Any Further" That Should Be Everyones Life Motto.
Cooper Burns 😏
Cooper Burns ( ͡° ͜ʖ ͡°)
( ͡° ͜ʖ ͡°)
( ͡° ͜ʖ ͡°)
_thats my motto when stroking my peen_
The greatest channel in the history of UA-cam!!
We love u Nate☺️☺️☺️
But we miss u Grant😭😭😭
😂😂😂
Where did he go?
Bajanfan101 he's trapped in the little box at end of some of the video's
DeaditeWheatley why is he behind the camera
😂😂😂
For anybody doing this at home I would recommend adding some pvc glue on the inside of the pvc before clamping it flat, this would help hold it down when you reheat it and just generally strengthen the bow.
Add the Black and Yellow TKOR signature!
Mark David i
this how u can fake items and say thats tkor
A busy dude. I really enjoy King. Such an intelligent mechanical mind. 95% of his content is concise and relevant to the task at hand. Thank-you.
Hey King of Random, I don’t know about you but I want to see you guys make a water jet.
Nicholas white yess me too
Hold up, We making WATER JETPACKS NEXT?!?
Braddahace nooo a water jet for cutting stuff
Or a hover bike like colin fruze
Nicholas white that sound like a great idea 💡
I don't have a slight clue on what's going on but I still love the satisfaction of every video!!!!
Uploading new video every single day is not an easy thing.....nice job :)
i miss the old guy
@@Noah_murray bruh this is from a year ago
@@Noah_murray That was tastefully conveyed...
Cohen's bored No we all do, buddy. We all miss him.
We do.
Yes
Make explosive bolts
playing a bit too much Zelda xD
I would say to much Skyrim lol
fair enough i'm thinking arrows not bolts and if i'm honest i never play with the crossbow in skyrim spellsword all the way
7 days to die reference?
GuardedDig2 sounds legal
I'm amazed this guy hasnt been banned. He shows how to make some crazy dangerous stuff.
Honestly, I LOVE IT!!!
You could also use fiber glass rods inside the big bow arms to give more power. Instaid of flatting it all.
Zna
Zna
Yeah so what is the points guys? So because ZNA did it (and the idea came from some one els not from him) i cant give the idea?
Why do you have to act hostile
Not acting a bit hostile what so ever so dont know what you talking about?
hail the new king of random
I am always wanted to make one, thanks so much!
I wish you would learn to speak English.
It was a little mistake it is alright
Omg your content is awesome dude!! keep on
Awesome idea to make a bow
why dont u shoot fire arrows from it and shoot them at those hydrogen clouds
This is actually really sick
U guys should try making sum kind of fancy flaming/explosive crossbow bolts (with that really touch sensitive powder)
i like the king of random way better than other DIY channels because he actually show you HOW TO BUILD IT! like if you agree
Buy flat pvc molding it will be easier to make the bow😎
PVC Moulding is Flimsy, This has More Substance.
These projects are the ones that keep me watching
To fill my need of destruction please use explosive arrows Pls😀
Anonymous Tomato Ye
Fill the arrows with liquid nitrogen so when they hit they make smoke cloud!
BOLTS!!!!!!!!
@@pricklypearirvin8631 i know right
Rasmus the bolts would explode before they left the crossbow.
Happy New Years from Australia
Now make it a cross-dressing bow.
Hand Tool Rescue just add a bow to it
Hand Tool Rescue pls learn to comment
Hand Tool Rescue love ur vids mate
king of random is awesome
I like your videos and wow the daily upload
ive been waiting soo long for this!!! so exciteddddd!!!!!!!
You should try copper plating things with electrolysis.
The Duke of DIY! Great work!
Awesome!!! Make a pvc recurve bow next plz!
Zna already did that
wouldnt that be exactly the same except the wood?
I'm currently in the hospital and I absolutely love your videos
where has the original King of Random gone
EthansAnts ikr
He is way better
He made a video explaining why he’s not currently making quick videos
EthansAnts yeah
Who?
I made this X-Bow at home today and it works great!👍
It's all fun and games until you take an arrow to the knee.
Bxller Trxy then you're a guard.
Bxller Trxy I was a adventurer like you until...........
Did you know that’s Nordic slang for getting married?
THIS IS INCREDIBLE !!!!!!!!!!!!!!
Sleep in past 7 or king of random video? Hmm.. I choose king of random
xX WolfPup Xx. I choose king of random
I sleep in past seven anyways XD
same
I'm lucky its out at 10 where I live
King of random
THE KING OF RANDOM :)
Guess who has two thumbs and gets no views except for from himself
This guy
ProjectUnknown lair I have two thumbs and no views
Tyler 529 oh well then I guess we both have no views
ProjectUnknown yup
Bob Kelso
i am very excited for part 2 !!
Convert the Worlds second largest super soaker into the worlds biggest flamethrower!!
This is what I subscribed for
Hypothetical question: Does this bow have the strength to go through a Zombie's skull?
well zombies are literal decomposing pieces of flesh so yea
@@tacticalbarstool3385 Zombie is a euphemism.
Very important thing was the knot. Thank you now I learnt it.
So you're William tell)))I love how much simpler these builds are
I allways love your videos
My Cupid costume is now complete. ❤
Tim Michaels my cross bow is now complete
Ummm....
I think they use a bow and not a CROSS bow
Riol Navan
Yes but mine is different. :)
Tim Michaels I just hope that you wont go around Shooting people with actual bolts.
Why cupid?
I remember doing something like this but it was two long pieces of wood with bolts and washers with boiling water being poured right into the pipe.
Am I gonna be the only one up all night waiting for part 2 or is anyone else gonna do the same!? No one, just me? OK.
I suggested making a PVC bow in previous videos. Awesome that they're doing a crossbow though.
RIP ZNA productions...😂😂😂😂
Lava Dipper lol🤣
I was searching for a comment like yours
Same joshc
Josh C same
Nobody hello
I missed these kind of builds
Sandwich it. Can i make sandwiches like that?
Make Detanator Bolts *Exploded When pressured much*
Ingredients
SD Alcohol 40-B
Fragrance
Black powder (From Fireworks)
Ethyal Acid 70% (Burning power) If 80+ it will explode much like a granade
Most important use the lighter striker from the end of the lighter
Connect it to the black powder for Detanating the other ingredients
The projectiles you shot from a crossbow are called bolts.
I did this and I worked very well!!! I would very much recommend this video
You should put meringue in a vacuum chamber and see what happens
That's One Sick Bow!
Make paintball landmines
Hey guys, great job.
Who watched these vids for entertainment and doesn't make the things
DD PP me, but I really want to make stuff tho
Jack Clare wanna meet up once and make everything xD
since you have a band saw, one suggestion i'd make to get more consistent bows from pvc would be to cut out a wooden form form a 2x4. both halves can be clamped onto the bow at the same time forcing the plastic into the proper shape.
Cool crossbow.👍👍👍👍👍
Cool project but its quite expensive because i have to buy following items:
Chop saw
Bandsaw
Belt sander
Vice
Heat gun(unless i can use a hair dryer)
Drill and right size drill bits
+
All the materials used for the actual crossbow
improvise,
its a life skill
You don't need a belt sander, just get sand paper.
Meh, just use a hand saw, heat guns are cheap at harbor freight. You'd probably need to invest $30 at most to make this build.
He's even using a Harbor Freight heat gun in the video.
Karlukki but you can use thoes tools later for later projects
I love how youtube search knew exactly what I was looking for after typing only two characters. Tells me a lot about youtube.
What if you put a bath bomb in liquid nitgrion
It Will go *bloop*
Such a great video brother. Thoroughly enjoyed it.
Why do you release it in two parts?! What if zombies were to come before you release the second part?!
Started watching this last year finally got round to finish watching it
When a crossbow starts as a piece of 2x4
More accurately a 1.5 by 3.5
That bow is yet to be TRIGGERED
Paracord is kind of elastic, wouldn't be better to use another type of cordage?
Ideally the bowstring doesn't stretch.
You can pre stretch it if you mesure out the exact length you need. Thats what we do for compound string.
Put it under tension with a ratchet strap over night and that should remove most stretching. Do a practice run before to see how much it stretch.
Jonathan Boucher ideally, you wouldn't use paracord at all, but that works.
We went over this already in the video watch it
right! i just googled it you can get actual bow string for like 20 bucks some times less depending on who you shop with.
First actual video l liked from him
You should make bolts with the head that looks like the TKOR symbol
Love this for no reason
In my opinion, the crossbow would be more powerful if you didn't pre bend the main limbs.
Andre Kielczewski well, he had to bend them, but maybe a little less would be better
The idea is to give it a recurve. Which, if done right, increases the force
Andre Kielczewski that’s what I was thinking
It might be, but this also isn't necessarily meant to go through everything.
I HAVE BEEN WAITING FOR THIS
Go try to make underwater firecrackers by coating the fuse with nitrocellulose lacker and homenade gunpowder
(Special for 2018)
My creepy Projects yeeeeeees I want to see that sooooo badly
This has got to be my favourite channel.
0:31 - Technically, crossbows fire bolts, not arrows.
I'm doing a school project on why the crossbow was the best medieval ranged weapon. Our presentations were canceled because of quarantine but I'm still making one on my own time.
Try the steam bottle in cold water trick, but instead of a bottle, use a tube with a balloon on the end. See if the ballon inflates or pops.
great video! i did make PVC long bow. instead wasting time for the PVC to cool off, splash some cold water and continue to the next section. thanks, i like the crossbow. i may use s thick teflon knife board to get it even lighter or sandwich two together. wood tend to warp in time; substitute PVC with thin teflon cutting board for the bow in two separate bow section. you have great idea for my crossbow refindment.
When I was about 10 years old my dad made me a crossbow and I used pegs as ammo, u know the stuff u hang washing out with. Anyway I was playing with it in the street when my neighbors son came out and started throwing rocks at me. I shot a peg at him and hit his leg the peg went so slow and wouldn't have hurt at all. 20 minuets later the police were at my door saying there was a report that a man was out shooting kids with a hunting crossbow. Like wtf I was 10 years old and the thing shot blunt pegs
Come on who really makes this stuff you just sit here and see how dope it is
True irony wrapping hot pvc around a fire extinguisher
Finally, something I can build
I miss the other guy
Can’t wait for tomorrow to see the end result!🏹
i would put the pvc in an oven for 30 seconds on low heat and then squish the whole thing at once in between 2 2x4's!
would that work
Love this channel
Can you put a full bag of potato chips in a vacuum and see what happens 👑
If in a bag they would be crushed, in a cannister nothing would happen
Dummy we have same profile pic lmao
Amazing video, keep it up
Sugar bottles in Silicone Mold???😍
A couple criticisms about the bow design:
- Bows work better if they're stiffer near the center and more flexible on the limbs. For PVC bows this is commonly done by leaving the center less or not compressed, tapering to full compression at the tips. This will also increase the draw weight without needing the secondary bow. With even flexibility the bow will bend mostly at the center.
- Those mounting holes look like a stress concentrator. Cord wrapped around the bow can attach it without these holes.
- Angling the bow to reduce bowstring being pulled down against the stock can improve performance.
How to make a crossbow - step 1 buy all kinds of industrial tools . Step 2- make it ...
Still a nice tutorial
All of these steps can be done in a couple hours with hand tools
SentsuizanXS man you dont get sarcasm
He got it, it just wan't that funny or worth reprisal.
GosuGeneralStan s/ is sarcasm