@@adrian.adrianl6401 hi dude hope your well there not all the same no wet coat is a spray and rinse hydrophobic coating lasts a few weeks or washes has no protection as such. Cure is designed for a ceramic coating to boost its performance n help rejuvenate it will last a month or two ceramic detailer is exactly what it says you can either use it as a drying aid or on a dry surface to increase gloss and add that final pop to the paint. Imo I love wet coat for wheels as it makes them much easier to clean next time. And prefer ceramic detailer as it's so universal go check my other videos on both products :)
I’ve recently started using this on top of gyeon wax that I applied about 2 months ago, with bathe+ aswell. Wicked combo, I use it on a wet panel and just put a few squirts into the drying towel each panel works great. Good video again mate 💪🏻
thats a great way to do things buddy how are you finding the gyeon wax? did you prep the surface before applying? cure is great as a topper once a month i wouldnt use cure on top of bathe+ as it wont bond as well but thanks for watching buddy :)
@@APASSIONFORDETAILING it’s pretty good the wax. I’ve only used cure a handful of times but works a treat as a drying aid! Got can coat to try out soon so I’ll keep you posted
@@APASSIONFORDETAILING yeah need to do a decon and wipe down with prep before hand anyway. Love stealth grey when it’s clean and glossy 👌🏻 it’s the old version I only got it just before Xmas and now they’ve made the evo version 😂
@@carpalex100 yhhh its new. Make sure u have stable conditions. Could always send it bk haha. Tip if you plan on doing it don't use any protection products use a quick detailer as a drying aid help remove asp hope u had a good Xmas n happy new year to u
I picked up Cure as a 24 hour later topper to Mohs. I spoke to Gyeon and it was recommended to prevent water spotting after a coating before the 7 day cure time. They did say it could be used 2 hours after coating, but recommended waiting 24-48 hours.
Have you tried there "Ceramic Detailing Spray" yet?? Amazing shine.. I have 1tr of both.. and never quite sure which one to apply after a wash with Bathe+..
Hi Gaz that's actully a very good question firstly if your using bathe+ I would just use the detailer as a drying aid not cure. If your just using a pure shampoo like just bathe not bathe+ then once washed you can use cure after then either wet or dry buddy most of theses sealants need to bond to the psint why alot of the time some products don't last as long 👍 I do haveva video on the ceramic detailer I love the stuff
@@APASSIONFORDETAILINGlike u said above u would nt need both as they are so similar. if u have to choose one of the two. which one would u choose ceramic detailer or cure?? by the way im going to use it after kochchemie GSF as a snowfoam and shampoo(ph neutral). my car is gyeon ceramic coated.
Hi there if you are using on a dry panel spary 2 sprays into your dry micro fiber then buff with clean dry cloth. If you get any high spots use damp cloth n buff again
@@prodromosapostolou5123 to be honest you should be fine just remember that you don't need much product it's super concentrated you can dilute it 50/50 with deionised water
@@APASSIONFORDETAILING yes i will dilute it also🙂 what about the ceramic detailing? will be ok to spray it directly on dry car panel and then clean it with dry towel?
In my ceramic coating pamphlet guide it says I can top the coating ( ONE Evo ) with Cure after an hour, but in e-mail correspondence with Gyeon I was told Cure can go after 24h . So, which one is true ? Thx
This one's for the viewers that asked for it enjoy 😉 like subscribe share the question is what sio2 sprays do you use ???
So the cure , ceramic detailer and wet coat all seem to be very similar to my not very knowledgeable eye , are they all overlap?
@@adrian.adrianl6401 hi dude hope your well there not all the same no wet coat is a spray and rinse hydrophobic coating lasts a few weeks or washes has no protection as such. Cure is designed for a ceramic coating to boost its performance n help rejuvenate it will last a month or two ceramic detailer is exactly what it says you can either use it as a drying aid or on a dry surface to increase gloss and add that final pop to the paint. Imo I love wet coat for wheels as it makes them much easier to clean next time. And prefer ceramic detailer as it's so universal go check my other videos on both products :)
@@APASSIONFORDETAILING thank you for the quick reply and the info much appreciated. Love the content TY
@@adrian.adrianl6401 that's no problem it's a community and I always put you guys 1st please like n share and thank you apoericate your support
I’ve recently started using this on top of gyeon wax that I applied about 2 months ago, with bathe+ aswell. Wicked combo, I use it on a wet panel and just put a few squirts into the drying towel each panel works great. Good video again mate 💪🏻
thats a great way to do things buddy how are you finding the gyeon wax? did you prep the surface before applying? cure is great as a topper once a month i wouldnt use cure on top of bathe+ as it wont bond as well but thanks for watching buddy :)
@@APASSIONFORDETAILING it’s pretty good the wax. I’ve only used cure a handful of times but works a treat as a drying aid! Got can coat to try out soon so I’ll keep you posted
@@carpalex100 yhhh its good stuff just make sure no protection on the psint before u apply can coat have yoy gone for the new csn coat evo ?
@@APASSIONFORDETAILING yeah need to do a decon and wipe down with prep before hand anyway. Love stealth grey when it’s clean and glossy 👌🏻 it’s the old version I only got it just before Xmas and now they’ve made the evo version 😂
@@carpalex100 yhhh its new. Make sure u have stable conditions. Could always send it bk haha. Tip if you plan on doing it don't use any protection products use a quick detailer as a drying aid help remove asp hope u had a good Xmas n happy new year to u
👍👍 cracking video any chance of a Christmas shout out Sean from York 😂😂
Cracking video as always mate.
Love thr support cheers dude 👍
I picked up Cure as a 24 hour later topper to Mohs. I spoke to Gyeon and it was recommended to prevent water spotting after a coating before the 7 day cure time. They did say it could be used 2 hours after coating, but recommended waiting 24-48 hours.
Ahhh let me no is that mohs evo ?,
@@APASSIONFORDETAILING yep DI had 30% off the day I was getting it so that was a bonus
@@APASSIONFORDETAILING Late reply. Yep Mohs Evo. Applied 2 coats yesterday. Waited till today and just finished with the Cure.
You habe to compare the Gyeon Cure VS Max Protect Purple QD. Would be very interesting.
Greets
Been waiting for someone to say that you can use this as a stand alone product. I'm going to use it over wax but still thank you
It's silica based designed for ceramic coated cars but yes 100 can use as a stand alone glad you enjoyed
The hydrophobic suck. From what I can see. Thanks for review 👍🏻
It's ok ti start with but it's mainly to give your current ceramic coating a boost of life
Use Weatcoat to improve hydrophobic
@@fermorales123 yes buddy 110%
Have you tried there "Ceramic Detailing Spray" yet?? Amazing shine.. I have 1tr of both.. and never quite sure which one to apply after a wash with Bathe+..
Hi Gaz that's actully a very good question firstly if your using bathe+ I would just use the detailer as a drying aid not cure. If your just using a pure shampoo like just bathe not bathe+ then once washed you can use cure after then either wet or dry buddy most of theses sealants need to bond to the psint why alot of the time some products don't last as long 👍 I do haveva video on the ceramic detailer I love the stuff
@@APASSIONFORDETAILING thanks for the tip... ill try it next time..
@@gazgleeson5669 your welcome buddy remember if soap has wax etc in it any protection you lay down won't bond to surface
@@APASSIONFORDETAILING thanks for the tip.... good to know 👍👍
👍👍 any chance of a Christmas shout out 😂 Sean from York 😂😂
🤣🙏🏼
@@APASSIONFORDETAILING is that a no then lol
@@seanhammond4527 never say never sean
How would you incorporate using gyeon ceramic detailer, and this product in your weekly washes ? Great video btw!
Hi you wouldn't need both there so simular, is your car coated
@@APASSIONFORDETAILING hello! Yes coated with gyeon pure evo
@luisv6038 I would use cure as my every other wash and detailer as my drying aid in between washes you will thank me later:)
@@APASSIONFORDETAILING thank you 🙏🏻
@@APASSIONFORDETAILINGlike u said above u would nt need both as they are so similar. if u have to choose one of the two. which one would u choose ceramic detailer or cure?? by the way im going to use it after kochchemie GSF as a snowfoam and shampoo(ph neutral). my car is gyeon ceramic coated.
Hello friend :) in order to use it in a dry car panel, i have to spray cure to a wet towel and not directly on the car panel. Am i correct?
Hi there if you are using on a dry panel spary 2 sprays into your dry micro fiber then buff with clean dry cloth. If you get any high spots use damp cloth n buff again
@@APASSIONFORDETAILING thanx a lot friend!! i think i will use from the beggining wet towel into the dry panel to avoid any spots
@@prodromosapostolou5123 to be honest you should be fine just remember that you don't need much product it's super concentrated you can dilute it 50/50 with deionised water
@@APASSIONFORDETAILING yes i will dilute it also🙂 what about the ceramic detailing? will be ok to spray it directly on dry car panel and then clean it with dry towel?
@@prodromosapostolou5123 go check out my video I did on the ceramic you will love it one of my fav products
In my ceramic coating pamphlet guide it says I can top the coating ( ONE Evo ) with Cure after an hour, but in e-mail correspondence with Gyeon I was told Cure can go after 24h . So, which one is true ? Thx
24 hours imo
@@APASSIONFORDETAILING thanks!!