Vlad. Just like to say thanks for an excellent video. Thanks to this and CHEP's video on the evolution of the A10 (looks like it's now on version 4) I went out and bought an A10 last week. Your video made putting it together very easy. A few things to note:- 1) They've upgraded the bearings on the V rollers. 2) They've redesigned the filament sensor (a couple of times). The latest seems to feed properly. 3) The cable to the LCD display has been upgraded to an IDC with full 0.1" pitch headers. Now the bad news:- They are still over-tightening the V rollers. My Y axis was stiff and bumpy and required backing off a lot. It no longer ships with a Superplate just a stick on Mylar sheet and a scraper :-( Mine shipped with a locked up Part Cooler Fan!!! Looks like when they stuck the duct in to the fan exhaust some excess superglue got into the body and firmly stuck the rotor to the body. A quick exchange of e-mails with Geeetech tech support and they're sending me a replacement hotend assembly. Even with the above I've been impressed with the quality of the prints I'm getting even without parts cooling. Many thanks for your efforts Ian
I have just ordered an A10, the advertising said latest version so I will be able to reference against the one you have. This video has been very useful thanks for the time and effort, it has helped me enormously. All the best Allen
you have the mk2 version there vlad its now on mk4 and its a fantastic printer.ive had mine for a while now and have custom firmware on it so you can do mesh bed levelling.and imo its far better than a standard ender3 but opions are like buttholes,everybodys got one lol
Cracking video. Really liked your style. I've just bought this model today so looking forward to more tips and help from you. Subscribed and hit that bell 🔔
PLEASE!!! When you are back feeding power from the stepper motors by moving them back and forth… UNPLUG THEM or only move slowly so you don’t fry your motherboards.
Yes. It is the same as the ender 3 so PETG and maybe TPU (very stringy though), just make sure your slicer settings (temp, speed, etc.) are adjusted accordingly. Mixing them is probably a bad idea though as there is only one hot end. EDIT: ABS would probably work as well although PLA is honestly better in my opinion
One of the best A10 assemblies I've seen. I've just bought the A10M with version 4 LCD board. This demo will help a lot once I actually assemble the thing....
New Channel: www.youtube.com/@Just_Print
Buy it here: geni.us/fyUh4U
Recommended: geni.us/JustVlads
I love it and this video help me allot
The A10 is actually a ender 3 clone so if you were wondering why it looks like and ender 3
That's why
What I like about your builds is that they are fair and unbiased.
You give the best chance with proper criticism when warranted.
That’s what everyone should be like
Vlad. Just like to say thanks for an excellent video. Thanks to this and CHEP's video on the evolution of the A10 (looks like it's now on version 4) I went out and bought an A10 last week. Your video made putting it together very easy.
A few things to note:-
1) They've upgraded the bearings on the V rollers.
2) They've redesigned the filament sensor (a couple of times). The latest seems to feed properly.
3) The cable to the LCD display has been upgraded to an IDC with full 0.1" pitch headers.
Now the bad news:-
They are still over-tightening the V rollers. My Y axis was stiff and bumpy and required backing off a lot.
It no longer ships with a Superplate just a stick on Mylar sheet and a scraper :-(
Mine shipped with a locked up Part Cooler Fan!!! Looks like when they stuck the duct in to the fan exhaust some excess superglue got into the body and firmly stuck the rotor to the body. A quick exchange of e-mails with Geeetech tech support and they're sending me a replacement hotend assembly.
Even with the above I've been impressed with the quality of the prints I'm getting even without parts cooling.
Many thanks for your efforts
Ian
I have just ordered an A10, the advertising said latest version so I will be able to reference against the one you have. This video has been very useful thanks for the time and effort, it has helped me enormously. All the best Allen
This is a top notch video! Wow. Great job man!
you have the mk2 version there vlad its now on mk4 and its a fantastic printer.ive had mine for a while now and have custom firmware on it so you can do mesh bed levelling.and imo its far better than a standard ender3 but opions are like buttholes,everybodys got one lol
I just put my a10m together, I should have watched this first. Great video
Cracking video. Really liked your style. I've just bought this model today so looking forward to more tips and help from you. Subscribed and hit that bell 🔔
PLEASE!!! When you are back feeding power from the stepper motors by moving them back and forth… UNPLUG THEM or only move slowly so you don’t fry your motherboards.
can you please make a review on the Geeetech A10T and or the Geeetech A20T 3-in-1-out Mix Color 3d printer please.
Best video
I don't want to see how to setup all these shit printers I want to see which printer is good and get it
Very detailed nice.
Какой лучше, ender 3 pro или geeetech A10 ?
bro can you buy the thrustmaster TX leather edtion and do an unboxing
This is a amazing tutorial... Thanks for that 💪🔥
when and where do you put in the SD card???
Which printer would you recommend to a tinker/beginner? I thought about the CR 10 Pro or the Cr X (I like the idea of dual-color)
Ender 3
I love this video. Very well put together.
In the included gcode the part fan wasnt on
DO IT SUPPORT POWER RESUME PRINTING?
Brilliant video! Well done! 👍👍👍🤠
Just buy the ender 3 it copies
Just like that.... 😂😂😂
can i use another type of filament in this printer?
Yes. It is the same as the ender 3 so PETG and maybe TPU (very stringy though), just make sure your slicer settings (temp, speed, etc.) are adjusted accordingly. Mixing them is probably a bad idea though as there is only one hot end.
EDIT: ABS would probably work as well although PLA is honestly better in my opinion
Am I early?
What 3d printing software do you use for the geetech a10
It uses Merlin same as the ender 3
@@spiderfandom7592 you mean marlin?
@@callumsmith5263 yes
One of the best A10 assemblies I've seen. I've just bought the A10M with version 4 LCD board. This demo will help a lot once I actually assemble the thing....
M
soooo boring man
please increase your speech abilities
Help!!! When I opened the box the glass plate was not attached to the steel plate. Please help