Hello, I was soldering the socket for the Aladdin XT and instead of the 3rd row of pins, I soldered it from the very top, i.e. from the side of the AV socket. Then I installed the chip there and the console started going crazy, resetting after startup. Now I have soldered everything as it should be, but unfortunately, despite the green power LED, I have no image. What could I have damaged? Before the entire procedure, the console worked properly
I have a 1.0 I believe (mfd 2001) I replaced the rubber band in the disc drive to get rid of the flashing yellow light. But I still get no video or audio.
I just bought a modded Xbox with a 3tb hard drive and the clock cap removed it is loaded with games but when I go to play games it cuts I. And out on signal any suggestions and keep up the great work!
quick question, new sub here =D so I can put xblast on a disc as an iso with an.xbe to flash my Aladdin XT or will it come flashed already? I used to softmod these units all the time back when using mechassault and the exploit with memory card, Used to use evox and unleash X ,,, now everything is different seems much easier to hard mod and im doing this to my 1.3 just waiting on ram chips and Aladdin xt chip
The Aladdin XT comes flashed already, but the clones can not be reflashed due to the bios chips used. You'll need to manually flash it with a programmer and use a bios that supports the 128MB RAM mod.
@@RetroRenegadeRepairs av cable works fine on other og Xbox,I done recap all 3300uf &1500uf ,I have both pal & NTSC tv ,Ive done cleaning av port both on console & av cable using alcohol but still no display & just sound :(
@@dx-gameplay396 Its possible the can caps near the AV port are needing replacement. Try leaving the console on for an hour and see if picture shows up.
Is it actually harmful to take all the hair from your shaved cat, put it in a blender, and pour it into your xbox? should I not be doing that?? thx for the video!
Aaaah the Roachbox. Well it's out of this coma now, thats a good thing :)
Its doing better, but its not out of the woods quite yet.
Hello, I was soldering the socket for the Aladdin XT and instead of the 3rd row of pins, I soldered it from the very top, i.e. from the side of the AV socket. Then I installed the chip there and the console started going crazy, resetting after startup. Now I have soldered everything as it should be, but unfortunately, despite the green power LED, I have no image. What could I have damaged?
Before the entire procedure, the console worked properly
My guess would be some resistors are damaged or an IC. Worst case, the MCPX is damaged and needs to be replaced.
I have a 1.0 I believe (mfd 2001) I replaced the rubber band in the disc drive to get rid of the flashing yellow light. But I still get no video or audio.
Its possible you have either a capacitor issue or its in a coma. I'd start with caps first.
You put IPA in your ultrasonic cleaner? Just straight up 99 or mixed with something?
99% IPA. I know others have had warnings on it being combustible, but I've not had issues. That said, I'm not responsible if something happens ;)
Preach. I would assume as long as it’s well enough ventilated it would be ok. Cheaper than flux remover and DI water too
How much would you charge to replace the capacitors in a original microsoft xbox
Depends on the version.
It's a version 1.0 original microsoft xbox it's modded
I just bought a modded Xbox with a 3tb hard drive and the clock cap removed it is loaded with games but when I go to play games it cuts I. And out on signal any suggestions and keep up the great work!
You may need to have the capacitors replaced. You could also try cleaning out the AV port.
Thanks for the input!
quick question, new sub here =D so I can put xblast on a disc as an iso with an.xbe to flash my Aladdin XT or will it come flashed already? I used to softmod these units all the time back when using mechassault and the exploit with memory card, Used to use evox and unleash X ,,, now everything is different seems much easier to hard mod and im doing this to my 1.3 just waiting on ram chips and Aladdin xt chip
The Aladdin XT comes flashed already, but the clones can not be reflashed due to the bios chips used. You'll need to manually flash it with a programmer and use a bios that supports the 128MB RAM mod.
my og xbox v1.6 it has sound but no display ,did u know how to solve it ?
It could be a few things.
AV port needs a clean
Incorrect region
capacitors failing
AV cable is faulty
@@RetroRenegadeRepairs av cable works fine on other og Xbox,I done recap all 3300uf &1500uf ,I have both pal & NTSC tv ,Ive done cleaning av port both on console & av cable using alcohol but still no display & just sound :(
@@dx-gameplay396 Its possible the can caps near the AV port are needing replacement. Try leaving the console on for an hour and see if picture shows up.
Where can i get the 3d platform?
Here you are: github.com/ACE-AU/XBOX-Motherboard-Support
@@RetroRenegadeRepairs Awesome thanks!
Is it actually harmful to take all the hair from your shaved cat, put it in a blender, and pour it into your xbox? should I not be doing that?? thx for the video!
It depends on the cat and, well, I am told not to worry, as it will grow back!