Jenna being a huge stihl guy with only big bore saws they hate the cold like we do lol. Im impressed by the fact you left hand started that saw hell im getting older and in the cold those saws will rip saw your shoulders out ! Another fun video to pass this winter by. Be safe and keep cutting girl! ❤ the new Jersey logman
That ms 881 sounds awesome when it starts up I love you 💞😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
Thanks Kyle! I need to get the smallest bar for this monster to to do some blocking. LOL We go this for milling purpose really and its freakin awesome!
Also, when it comes to warming up saws it’s ok to rev it some when cold to keep it running you just don’t want to pin it wide open. I also rev it up in stages, I have a short on it and I find that helps them last the longest and have the least chance of a cold sieze from heating up to fast
Nicely done. I keep hoping STIHL will take the injection system from the 500i and put it into like an 882i. Those stihl injection machines are so easy to start compared to a carburetor.
Make sure its top dead center before pulling. My 088 is super tempermental in general . But once its cold its like pulling over a big tree with fishing line lol . 😂 now a days i pull bar off and put it in a warm vehicle.
hehe, nice workout in the cold :D That chain is a little too tight. You should give it some slack - especially if you gonna throw that thing on the shelf for a while.
Hi chainsaw Jenna I just want to let you know that all stihl products don't usually like the cold weather it only works when it's cool to use them properly from Thomas Australia 🇦🇺 😊
That started shockingly easy. Im gonna get to do some cold starts at -40 here soon. But those 881s start nice compared to the old macs and homelites or even the 088. The wost starting will always be the Husqvarna 2100CD. 100 CC and no decomp valve and small handle, those start hard at 0 C nevermind -40
haha awww that sounds awful, no decomp valve. This 881 super new haven't ran no where near my other saws lol and it was in a 50 degree shop before hand so that's helps. haha
@@chainsawjenna thank you very much for your response, I saw at Granberg that there were smaller chain pitches like the 3/8 1.3mm (050) lp, in GB Pro Titanium precisely to promote penetration and cutting precision with large guides. length, both for carving and miling.. only no one seems to use it or has any feedback for high-power machines.. best regards🎈
Chain too tight 😮 I can hear the whine and the chain stops almost instantly when you let off the throttle. Good job starting the saw! Shit looks tough.
Try pulling over a 090 I have one and I have the 881 as well and the 090 pulls over a lot harder you should see how cool those STIHL jet powered saws are
Oh yes! It is what it is tho. That's just something I had/have to learn to work around and be more cautious when running these tools. I'm not encouraging people to run these tools the wrong way who are new to this world, but I advise to be cautious no matter stage your in and do what makes you feel comfortable. I have years of experience of running chainsaws from an early age and I know what I'm comfortable of doing and what I'm not. What I'm trying to say be safe all the time. lol
Thank you, this is a good answer. I have only a small garden 300m² and have had only one tree to cut. So I have bought only a small electrical cainsaw from aldi. Your art is not for me. But I like it and will follow you. Have you evertried special tools for lefthanders? I am old now and have a long experience in usinng this wrong tool. Changing back is difficult. I am from the generation forced to write with the rigth hand. That is really a big mistake. Do you like to change this experiences about beeing lefthanded?@@chainsawjenna
Wanting a big foot statue similar to Mike Morgan’s wanting to know if you will make me one doing a video And what it would cost and if you go to the Paul Bunyan show next year I could pick it up there, Jenna
i am impressed with the fact she actually started it , i am male and probs no bigger than she is , and i realy struggle with them , i had to get someone to hold down my ms500i so i could give it a good yank to start it , 🤣🤣🤣
I have a challenge for you jenna cold pullstart video when the eninge is not starting up a long time no prime button using &no choke using only cold engine pullstart video
Ok super la tronçonneuse mais ils vendent pas les bras avec pour démarrer 😂en plus quelle poids cette machine faut la tenir le guide et plus grand que la gamine 😂après 15 minutes avec une machine comme ça ta plus de bras 😅
Ты что,левша?Так можно сломать стартер,если сразу дергать с ударом.Надо сперва потянуть,чтоб произошел зацеп с собачками на маховике,а уже потом дёргать.
Not true, it's called if someone maintains their equipment then it shouldn't have a problem starting how ever long it's been sitting around. So stfu because you don't know how long it's really been sitting around because are not them.
So all you do is start saws for views!! Wow, your mom & dad must be so proud!!it's gonna get real guys. What are you gonna get a job or do something useful???
Jenna being a huge stihl guy with only big bore saws they hate the cold like we do lol. Im impressed by the fact you left hand started that saw hell im getting older and in the cold those saws will rip saw your shoulders out ! Another fun video to pass this winter by. Be safe and keep cutting girl! ❤ the new Jersey logman
Thanks man I appreciate it! We enjoy sharing our experiences with you all and hearing your inputs 😁
The size of that chainsaw is mind blowing, as big as you, I give you props for even holding it up 😅👏
That thing is massive, great job Jenna!
Nice job Jenna, you surprised me.
Now, to get to work.
Your skil with chainsaws just keeps on amazing me!! Now opening shop door with it. Lol great video
haha I even use it as a spatula when I'm cooking LOL
That ms 881 sounds awesome when it starts up I love you 💞😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
That's a lovely saw...
That is a good start up !
Hope you have big sticks to cut !
Seriously awesome watching you starting that beast! Can’t wait to see you do some blocking with that animal! 😉
Thanks Kyle! I need to get the smallest bar for this monster to to do some blocking. LOL We go this for milling purpose really and its freakin awesome!
@@chainsawjenna Mill any slabs yet ?
Although you know if you block a bear with that beast it’s going viral!
Also, when it comes to warming up saws it’s ok to rev it some when cold to keep it running you just don’t want to pin it wide open. I also rev it up in stages, I have a short on it and I find that helps them last the longest and have the least chance of a cold sieze from heating up to fast
Yes, I totally agree :)
Nice cold start. Can’t wait to see what’s in the ripsaw box.
me too!!! I'll show you guys don't worry!
Ripsaw 2511 would be my guess
That’s what I thought too@@scottkellar6549
Nicely done. I keep hoping STIHL will take the injection system from the 500i and put it into like an 882i. Those stihl injection machines are so easy to start compared to a carburetor.
Yeah it would be nice, I have mix feeling about it as well. Lol would be nice tho!
I just got mine today I usually use a 251 ms I cut alot of big oaks in my business and I thought that this was just badass
Make sure its top dead center before pulling. My 088 is super tempermental in general . But once its cold its like pulling over a big tree with fishing line lol . 😂 now a days i pull bar off and put it in a warm vehicle.
Good job Jenna
Ripsaw box, let's go!
Nice video
hehe, nice workout in the cold :D That chain is a little too tight. You should give it some slack - especially if you gonna throw that thing on the shelf for a while.
Nice ❤
Hey what kind of hydraulic table cart have you got? I’m in the market for one.
Hi chainsaw Jenna I just want to let you know that all stihl products don't usually like the cold weather it only works when it's cool to use them properly from Thomas Australia 🇦🇺 😊
Yes thats Girl Power with mighty Maschine😊😊😊
Hi Jenna do you do dog carvings? Would love to purchase one if possible.
That started shockingly easy. Im gonna get to do some cold starts at -40 here soon. But those 881s start nice compared to the old macs and homelites or even the 088. The wost starting will always be the Husqvarna 2100CD. 100 CC and no decomp valve and small handle, those start hard at 0 C nevermind -40
haha awww that sounds awful, no decomp valve. This 881 super new haven't ran no where near my other saws lol and it was in a 50 degree shop before hand so that's helps. haha
@@chainsawjenna yeah, you get used to it I guess, there’s a reason I put snowmobile handles on some of my saws😂
Why didn't you start it on high idle after the saw popped off? Then it would run...
Great. Now I want to buy an 800.
Дитинко.цей.штіль.важить.більше.як.ти.молодець.справляєшся
You should have ripsaw port that 881
That could be a possible lol
Woww keren bro
From ur viral Facebook vid haha the way you said October in the cold
Auwucktubar
wtf are you saying?
Now thats a saw it was bigger than her just getting out of the building was amazing
Hello Jenna, good video 👍🏼
This chain is a 3/8 lp for carving or .404?
It's a .404 chisel chain for milling.. I got it at granberg
@@chainsawjenna thank you very much for your response,
I saw at Granberg that there were smaller chain pitches like the 3/8 1.3mm (050) lp, in GB Pro Titanium precisely to promote penetration and cutting precision with large guides. length, both for carving and miling.. only no one seems to use it or has any feedback for high-power machines..
best regards🎈
Where is this. ..?
Seus vídeos são muito bons. Temos uma fabrica Sthil no Brasil, mas não temos o 881😢
How long is that saw? I had no idea they made them that big, but nice job on the cold start!
This is a 54" bar that I got from Granberg. It's pretty massive, what's crazy is that they make even bigger bars. lol
Are you going to be at the Paul Bunyan show (Ohio) this year?
Молодец
Chain too tight 😮 I can hear the whine and the chain stops almost instantly when you let off the throttle. Good job starting the saw! Shit looks tough.
Let it warm up and make a cut. It was pretty tight.
Как задача для этой пилы? Что вы делаете?
Try pulling over a 090 I have one and I have the 881 as well and the 090 pulls over a lot harder you should see how cool those STIHL jet powered saws are
Now it"s Big Log Larry & Giant Saw Jenna!
hahaha right!
thanks for watching!
How much does your 881 weigh all fueled up?
It’s like 45 pounds I think
❤
Thats realy a monster! Have you ever had a problem with tools all designed for right handed people?
Oh yes! It is what it is tho. That's just something I had/have to learn to work around and be more cautious when running these tools. I'm not encouraging people to run these tools the wrong way who are new to this world, but I advise to be cautious no matter stage your in and do what makes you feel comfortable. I have years of experience of running chainsaws from an early age and I know what I'm comfortable of doing and what I'm not. What I'm trying to say be safe all the time. lol
Thank you, this is a good answer. I have only a small garden 300m² and have had only one tree to cut. So I have bought only a small electrical cainsaw from aldi. Your art is not for me. But I like it and will follow you. Have you evertried special tools for lefthanders? I am old now and have a long experience in usinng this wrong tool. Changing back is difficult. I am from the generation forced to write with the rigth hand. That is really a big mistake. Do you like to change this experiences about beeing lefthanded?@@chainsawjenna
😱👀👀👀
Congratulations Jenna on cold starting this bad boy in this type of weather!
Best unedited cold start video of the MS881 by a girl out there 👍👏👏🙌🔥💯
Wow Jenna you trying to do a cold start
You just proved Diamante comes in small packages
That thing weighs more than you 😂, you got it though!
It takes a little to tame this beast lol
I love you
That saw is bigger than you ❤❤❤
It's a monster!!!!
Дівчата люблять великі розміри😂😉
let the chainsaws for the men that know
Wanting a big foot statue similar to Mike Morgan’s wanting to know if you will make me one doing a video And what it would cost and if you go to the Paul Bunyan show next year I could pick it up there, Jenna
Hello go ahead and email Chainsawjenna@gmail.com :)
Ты точно готова к зомби-аппокалипсису, ты знаешь чем можно уничтожать зомби! 👻😁👍🇷🇺
Bạn bán máy cưa nay bao nhiêu tiền vậy bạn
I have 056 with no decompression. I wouldn't even try it on a day like that
How much price
north of $2,000
@@chainsawjenna to much money no need this chainsaw
Why don't u use starting fluid or Either.
Either and starting fluid are the same thing
Geile Säge, aber das Geld für einen Doppelkammer Kanister mit Schnelltankverschluß war scheinbar nicht mehr drin.
i am impressed with the fact she actually started it , i am male and probs no bigger than she is , and i realy struggle with them , i had to get someone to hold down my ms500i so i could give it a good yank to start it , 🤣🤣🤣
I have a challenge for you jenna cold pullstart video when the eninge is not starting up a long time no prime button using &no choke using only cold engine pullstart video
huh? What's the point?
@@zod5966 the girl need alwaw full choke en prime button when the saw not startup after long time
@@zod5966 &this is not a cold startup after long time saw starts to easy
📐🪚🤛🧐👍
not bad pullstarting for a super big amateur as you
Jenna that saw is bigger than you.
lol I know It's kinda hard to hold with a bar that big on it. I need to be taller to hold this sucker lol
Will at.least your ready to carve a giant red wood tree.Ha!ha!ha!.. i am impressed with your carvings. Great job. Tell Ben to get you heat in the shed
Moisés game Mato Grosso Boa noite Blz 👍👍👍🇧🇷🇧🇷
Ok super la tronçonneuse mais ils vendent pas les bras avec pour démarrer 😂en plus quelle poids cette machine faut la tenir le guide et plus grand que la gamine 😂après 15 minutes avec une machine comme ça ta plus de bras 😅
The bar is too big the saw should not nose dive
It’s fine lol, what else is gonna run that bar. Eventually with a longer bar they are nose heavy it’s normal
See the exhaust smoke ❤ u do know u are polluting the world
lol I use Apsen Fuel;)
@@chainsawjenna do you care about the air pollution
Ты что,левша?Так можно сломать стартер,если сразу дергать с ударом.Надо сперва потянуть,чтоб произошел зацеп с собачками на маховике,а уже потом дёргать.
Jenna this is not a col pullstart video after a fiew Monts the saw start up to easy to be not starting up a long time
Not true, it's called if someone maintains their equipment then it shouldn't have a problem starting how ever long it's been sitting around. So stfu because you don't know how long it's really been sitting around because are not them.
chainsaws in Doom
So all you do is start saws for views!! Wow, your mom & dad must be so proud!!it's gonna get real guys. What are you gonna get a job or do something useful???
Ive this is a complete start after fiew months i aim santa claus jenna😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂