I’m loving my S.A transducer kit. I upgraded to the new 300watt amp, it’s great. The original 100watt amp would get too hot to touch after about 30min use. No issues at all with 300watt amp.
@@rohitbeniwal8649 since this post I’ve had 2 x 300watt amps fail. So at this stage I would have to say they are un-reliable. The 300 watt doesn’t make haptics stronger, it doesn’t get hot.
Hi. What about the Sound Output Volumes? Did you adjust it for each Bass Shaker and each efect separatly/individual or did you leave them on 100% for each shaker and each effect? This would be helpful... Thank you
Not really, you're limited by the vibrations through the rig. Too many and they interfere with each other; cancelling each other out or creating standing waves. The items you mention won't change that. You can run more, I just don't think it adds much and can detract, so suggest limiting it, but it's all personal preference.
We have one set up on a Sim-Lab P1-X (40160) and it's still great, but weight does have an impact, I go into that in more detail in this video. ua-cam.com/video/k9UVboq8zrg/v-deo.html Any other questions just let me know. Cheers.
Quick question - do you guys recommend silicone grease etc for use where the mounting brackets interface with the vibration isolators? I get hell of a lot of squeaking when in use...
Hi, you can use that, although they usually break in pretty quickly and stop making any noise. Just for anyone else reading make sure you use silicone grease and not any regular petroleum based oil as it'll destroy the rubber.
just installed the rear corners (RR and LR) to my 80/20 on the large lower frame near the rear corners.....cant really differentiate between left and right with my seat of the pants. Hoping these frequency adjustments help.
Hi, there's more information on that in this video: ua-cam.com/video/u4INM9ZZpnc/v-deo.html Check it and let me know if you have any more questions, I've added email in the the About section.
Hi, everything is paid on the website, for all but I think Switzerland there are no extra fees when receiving the goods. And you'd have to pay shipping and VAT with a distributor, as well as a margin for the distributor. Direct from the warehouse is the lowest cost method. Cheers.
I've used the same basic tune for AMS2, RF2, ACC etc. You can fine tune it by car or track if you like but it's a good base for all of them. I'll be updating it within the next couple of days, some improvements in Revs, otherwise pretty similar. Cheers.
@@slip-angle2400 Hi I tuned it according to this video and it worked great until Simhub updated to the current ver 9.5.2. The effects seem different now especially the road rumble effect is more subdued. the volume was on 70% and cranked it up to 100% but it is still subdued. What should I do?
@@simsfamily6238 We haven't noticed that on our end, but let me check with that in mind. I'll also send a note to SimHub to see if anyone else has noticed the same thing. Are you noticing this in AMS2, or another sim?
Hi, there's more information on that in this video: ua-cam.com/video/u4INM9ZZpnc/v-deo.html Check it and let me know if you have any more questions, I've added email in the the About section.
I’m loving my S.A transducer kit. I upgraded to the new 300watt amp, it’s great. The original 100watt amp would get too hot to touch after about 30min use. No issues at all with 300watt amp.
But does the 300w amp give better/stronger vibrations?
@@rohitbeniwal8649 since this post I’ve had 2 x 300watt amps fail. So at this stage I would have to say they are un-reliable. The 300 watt doesn’t make haptics stronger, it doesn’t get hot.
Fantastic video, super helpful and informative.. cant wait to run my haptics from you guys!!
Thanks, any questions during set up or use just let us know.
@@slip-angle2400 I'm having trouble down loading the latest 6ch driver file, could I get this emailed to me?
Thanks for this ! 😊
Useful info, thanks
Hi.
What about the Sound Output Volumes? Did you adjust it for each Bass Shaker and each efect separatly/individual or did you leave them on 100% for each shaker and each effect?
This would be helpful... Thank you
I recommend leaving Sound Output volumes at 100%, limiting the output from SimHub just makes the amp work harder. Cheers.
@@slip-angle2400 thank you...good to know
Do you think a nice DSP, better amp, and better transducers would help with sound separation for adding more than three effects?
Not really, you're limited by the vibrations through the rig. Too many and they interfere with each other; cancelling each other out or creating standing waves. The items you mention won't change that.
You can run more, I just don't think it adds much and can detract, so suggest limiting it, but it's all personal preference.
I wonder how this would feel on bigger profile like 160x40 like the Trak racer TR 160. Would you lose to much vibrations being bigger profile
We have one set up on a Sim-Lab P1-X (40160) and it's still great, but weight does have an impact, I go into that in more detail in this video. ua-cam.com/video/k9UVboq8zrg/v-deo.html Any other questions just let me know. Cheers.
Quick question - do you guys recommend silicone grease etc for use where the mounting brackets interface with the vibration isolators? I get hell of a lot of squeaking when in use...
Hi, you can use that, although they usually break in pretty quickly and stop making any noise. Just for anyone else reading make sure you use silicone grease and not any regular petroleum based oil as it'll destroy the rubber.
just installed the rear corners (RR and LR) to my 80/20 on the large lower frame near the rear corners.....cant really differentiate between left and right with my seat of the pants. Hoping these frequency adjustments help.
Hi, there's more information on that in this video: ua-cam.com/video/u4INM9ZZpnc/v-deo.html Check it and let me know if you have any more questions, I've added email in the the About section.
Are you looking for EU distributer, because out here the kit can get quite more expensive after shipping, VAT and customs?
Hi, everything is paid on the website, for all but I think Switzerland there are no extra fees when receiving the goods. And you'd have to pay shipping and VAT with a distributor, as well as a margin for the distributor. Direct from the warehouse is the lowest cost method. Cheers.
Would your recommendations be different for AMS2?
I've used the same basic tune for AMS2, RF2, ACC etc. You can fine tune it by car or track if you like but it's a good base for all of them. I'll be updating it within the next couple of days, some improvements in Revs, otherwise pretty similar. Cheers.
@@slip-angle2400 Hi I tuned it according to this video and it worked great until Simhub updated to the current ver 9.5.2. The effects seem different now especially the road rumble effect is more subdued. the volume was on 70% and cranked it up to 100% but it is still subdued. What should I do?
@@simsfamily6238 We haven't noticed that on our end, but let me check with that in mind. I'll also send a note to SimHub to see if anyone else has noticed the same thing.
Are you noticing this in AMS2, or another sim?
I have trouble, shakers work great. But i can not use onboard and shakers usb amp
Hi, email me directly (address on our website). Cheers.
I just installed four corners this weekend and now fine tuning. I cannot be certain that left and right are clear either I will report back.
Hi, there's more information on that in this video: ua-cam.com/video/u4INM9ZZpnc/v-deo.html Check it and let me know if you have any more questions, I've added email in the the About section.