I just replaced the bearing. The outer diameter of the 3x8x4 bearing was small, so it was not possible to properly tighten the ribbed belt. Therefore, I used 2+2 pieces of 3x9x5 mm (603 ZZ) bearings. Thanks for the video!
For the pulley I also recommend spraying silicone, letting it dry and that's it. Clean the white silicone rollers well with alcohol. If we want something else, we can clean the axles where they are housed. Add a little silicone spray too if you prefer.
Dirty Rally, ETS and other games, I can hear friction in the wheel when calibrating, doesn't don't feel anything when trying to use, like belt or something is losen
@@junaidsconcepts if you are using newest driver pls doing this step, load in to your game, than press Windows key, in " all app " open thrustmaster folder >> firmware update, wait until it open and back to game again, do not press ok.
Hey need some help. Just spent the entire day trying to do this and its really noisy. Tried reorganizing everything around the bearings in every way possible and nothing seemed to fix it. Have the 3 bearings in now tried two with the washers and same thing. Any ideas?
thats Plastic Cap that hold the Bearing of Center Shaft, u can contact with Thrustmaster, I fix it by myseft using 1 mm steel wire, heated the wire and wrap around the plastic cap
@@basbakankedi2421good to know its so brittle before i break it. I heard it making cracking noises while reassembling. Disappointed with thrustmaster's build quality so far. Not a fan.
And I have very important question. You know how the real wheel in car works right? when you turn it comes back to the center itself.....I used to had Thrustmaster T300 GT and this wheel did the same thing in ATS ETS and every other sim but when I look at youtube videos with TMX looks like it's not working every time someone turns they don't let the wheel to move back to the center alone but they turn the wheel back manually and I can't see if this wheel has that autiomatic centering or not , it has ffb with belts so it should move back automatically.
I just replaced the bearing. The outer diameter of the 3x8x4 bearing was small, so it was not possible to properly tighten the ribbed belt. Therefore, I used 2+2 pieces of 3x9x5 mm (603 ZZ) bearings. Thanks for the video!
I recommend lubing the sprockets, I've just done it and it is smoother.
I used silicone grease.
I recommend using long electronic pliers for handling and guiding cables.
For the pulley I also recommend spraying silicone, letting it dry and that's it. Clean the white silicone rollers well with alcohol. If we want something else, we can clean the axles where they are housed. Add a little silicone spray too if you prefer.
We can also clean the plastic gears and put silicone in grease or spray on them.
Thank you very much, I´ve done the upgrade now and its much better!
Glad it helped!
Its okay to talk. To explain what what you are doing. Thanks.
😂😂 and I say he talk too much!!
What is he even doing at 3:30????? For the life of me, I can't find the screw he's undoing
@@Iranoutofideasforachannelname There's no screw, he's cutting a ziptie that holds the cable down.
What if he doesn't speak english?
Hi, thank you for this !
Mine is slithly loose with about 1 degree or so of "looseness", do you think it would need belt tension also?
Thank you.
This just shows how to f up your wheel in time :D
How so? Need this thing to last me another year or two at least.
6:55 screws everywhere classic
I have the tmx pro and everything seem to work but steering works irl but doesn't work in the game
forza 5, 2021_TTRS_17 ????
Dirty Rally, ETS and other games, I can hear friction in the wheel when calibrating, doesn't don't feel anything when trying to use, like belt or something is losen
@@junaidsconcepts if you are using newest driver pls doing this step, load in to your game, than press Windows key, in " all app " open thrustmaster folder >> firmware update, wait until it open and back to game again, do not press ok.
@@nguyentrung462I’m having the same problem
Is more better feeling after this roll change?
Kokos • 1 month ago
Thank you very much, I´ve done the upgrade now and its much better!
the feeling is soft, less drag
Hey need some help. Just spent the entire day trying to do this and its really noisy. Tried reorganizing everything around the bearings in every way possible and nothing seemed to fix it. Have the 3 bearings in now tried two with the washers and same thing. Any ideas?
Hi, can you tell me de dimension from the base?
hello sir, what u mean?
@@nguyentrung462 hi, it's ok. Already found a solution
i took off the same screws one by one and i only could take off the downside cover instead the upper one, and i cant take off the wheel
i think you miss some big screws inside, you can record a video than upload to youtube, send me link and i will see what happen to you
you can tell me the order washer washer.....then? Thank you
Oh, im order from Shoppe SEA, you can order it on Amazon or go to nearest mechanical store and tell them the size of washer thatyou want
@@nguyentrung462 Thank you. I needed to know how you mounted it, that is, you inserted: washer washer bearing washer (2)......
@@nguyentrung462 From the video you don't understand the assembly procedure very well
@@alexturcan6945 size not fit sir
@@alexturcan6945 detect by yourself, cause the washer size different, just put the washer and bearing in, untill it match the belt size
Bro what is the part of that you remove at 8:47 and it gets broken to 3 pieces, I just broke mine too, how can I get it where can I get it
thats Plastic Cap that hold the Bearing of Center Shaft, u can contact with Thrustmaster, I fix it by myseft using 1 mm steel wire, heated the wire and wrap around the plastic cap
@@nguyentrung462 thanks bro I put it back somehow my steering works properly
@@basbakankedi2421good to know its so brittle before i break it. I heard it making cracking noises while reassembling. Disappointed with thrustmaster's build quality so far. Not a fan.
And I have very important question. You know how the real wheel in car works right? when you turn it comes back to the center itself.....I used to had Thrustmaster T300 GT and this wheel did the same thing in ATS ETS and every other sim but when I look at youtube videos with TMX looks like it's not working every time someone turns they don't let the wheel to move back to the center alone but they turn the wheel back manually and I can't see if this wheel has that autiomatic centering or not , it has ffb with belts so it should move back automatically.
this wheel have same Auto recenter it seft, but base on the user setting it will auto center or not
It has auto center but the problem I have with auto center is that the wheel gets too stiff.
Please help!!! I haver one gear Broken and i can't repair beacose i can't buy It. Where can i buy the gear???
Order 3D printer or contact Thrustmaster support on thrusmaster.com or you can search " fix teeth gear broken " on UA-cam that you can do it at home
@@nguyentrung462 tnhx so much!
I've the same wheel, and it isn't shiftung up & dowm plus my forcefeedback isn't works
your motor is dead, try clean shifting switch
@@nguyentrung462 thanks, i'll try it
효과가 확실하게 있습니까?
Sorry, can't understand 😥
@@nguyentrung462 he said "are u sure it works?
"
@@milansurkew6353 its working, feel smoother