Thank you immensely!!! I thought we were going to have to buy a new washer! I just did this after watching your video & we have been having this problem about a month. It was driving me insane! I did this & it now spins & doesn't shut off in the middle of a cycle! Thank you, Thank you, Thank you!!! God Bless!!! 🎉 I do the laundry in the family & my dad looked this up & this was the first one he came across. Words cannot express how thankful I am, seeing how laundry is my least favorite but someone has to do it. Thanks again & God Bless! ~ Tammy
I truly cannot thank you enuf for this, it worked!!!!!!!!!! I was about to cry thinking my machine was broken LOLOL you saved my weekend, God bless you brother!!!❤❤❤❤❤
Thank you! I purchased two replacement lock switches bc my locking mechanism part broke off, I definitely didn't get mad and aggressively try to pull the lid mid wash 😅. But I have been having to manually click the switch, one the second replacement locking mechanism installed for 3 weeks now. I was going to buy a new control board bc I just didnt understood why everything worked perfectly but there was a disconnect with the signals. I am going to try this! Fingers crossed. Thank you for the video.
🎉 I don't know how to thank you!! This worked brilliantly!! I tried other reset suggestions with no luck and almost fell over in a dead faint when your suggestion worked!! Thanks!!
I learned that installing a new pump puts the machine in "flood mode". The pump runs for a while after the washer is plugged back in. I checked it after about 20 minutes. After that it's ready to use like before.
I also had a hard time finding how to clear all the fault codes. FYI, for GE top load washers with a digital display, enter Field Service Mode by pressing the Start button for 10 seconds while rotating the cycle selection knob 180 degrees (seven clicks) and then release the Start button. Then turn the same knob to Diagnostic Fault/Test #16 and press the Start button to Clear all Fault Codes.
Changed capacitor which was the issue last year, not the problem so looked for videos. Found several. Used tester on all parts and ran diagnostic and reset. I am trashing the same washer and bought a different one. Over it. All the comments on videos say the GE washer is trash.
My apartment has the same wash and it is utter trash. Always breaks again eventually and have to reset it again which means there is nothing wrong with the washer itself.
I feel dumb for asking this, but not sure if I can add the softener inside the middle part where there is a lid... they usually are open.. HELP PLEASE!
Yes, there's a dispenser on top of the agitator (middle part). There should be something about "fabric softener" printed on that part. However, fabric softener is terrible for the machine. I would avoid using it.
Is it normal in the older model I just bought it to have water no inside the drum but when I spin it. It’s not draining my clothes properly and Lowe’s has the 48 hours return policy. Hasn’t even been a month since purchased :(
Hello. Did you buy it new? If so, I would call GE because it's still under warranty. If not, the two most common problems are the lid switch (easily replaced) or software upgrade (you have to buy a GE module for this).
Drain pump not working, no power in the pump connector, your instructions worked! Thank you!
You're welcome. Glad it worked.
Thank you immensely!!! I thought we were going to have to buy a new washer! I just did this after watching your video & we have been having this problem about a month. It was driving me insane! I did this & it now spins & doesn't shut off in the middle of a cycle! Thank you, Thank you, Thank you!!! God Bless!!! 🎉 I do the laundry in the family & my dad looked this up & this was the first one he came across. Words cannot express how thankful I am, seeing how laundry is my least favorite but someone has to do it. Thanks again & God Bless! ~ Tammy
You're very welcome, Tammy. Thank you for the comment. God bless you too.
I truly cannot thank you enuf for this, it worked!!!!!!!!!! I was about to cry thinking my machine was broken LOLOL you saved my weekend, God bless you brother!!!❤❤❤❤❤
You're welcome. God bless you too.
Thank you! I purchased two replacement lock switches bc my locking mechanism part broke off, I definitely didn't get mad and aggressively try to pull the lid mid wash 😅. But I have been having to manually click the switch, one the second replacement locking mechanism installed for 3 weeks now. I was going to buy a new control board bc I just didnt understood why everything worked perfectly but there was a disconnect with the signals. I am going to try this! Fingers crossed. Thank you for the video.
Brother I've been struggling with ge washer all afternoon. God bless!!
🎉 I don't know how to thank you!! This worked brilliantly!! I tried other reset suggestions with no luck and almost fell over in a dead faint when your suggestion worked!! Thanks!!
Thank you. This made my washer start working again. I couldn't afford a repairman or to replace it. You really helped my family
I'm very happy to hear that Christina. You're welcome.
Thought I would have to buy a new machine. You saved me a lot of money that I don't have. 👍
Glad I could help
Thank you! You just saved me a service fee plus was able to figure out what code to fix
Nice. You're welcome.
Thank you so much for sharing this video. It got my washing machine working again.
You're welcome. Thank you for the comment.
Well dang. This actually worked! THANKS!!
I learned that installing a new pump puts the machine in "flood mode". The pump runs for a while after the washer is plugged back in. I checked it after about 20 minutes. After that it's ready to use like before.
This actually worked thank you so much 😊
You're welcome!
Very cool, thank you, excellent explaining
Thank you and you're welcome.
Thank you so much for this!! 💙
OH. MY. GOSH!!!! Thank you! This video was so helpful! I wish I would’ve seen your video first! I’m happy!!
Okay great. You're welcome.
THANK YOU!
Thank you it works now. You save me money$$$
Mine won't spin water drains or so idk if this will help ugh
GOD BLESS YOU!!! I needed this video! Thank you! Thank you! Thank you!
Thank you this worked
I also had a hard time finding how to clear all the fault codes.
FYI, for GE top load washers with a digital display, enter Field Service Mode by pressing the Start button for 10 seconds while rotating the cycle selection knob 180 degrees (seven clicks) and then release the Start button. Then turn the same knob to Diagnostic Fault/Test #16 and press the Start button to Clear all Fault Codes.
Thank you, Dennis. I appreciate the comment.
Thank you so much. I needed this
@@Mumen_Rider94 you're welcome. Thank you for the comment.
Changed capacitor which was the issue last year, not the problem so looked for videos. Found several. Used tester on all parts and ran diagnostic and reset. I am trashing the same washer and bought a different one. Over it. All the comments on videos say the GE washer is trash.
My apartment has the same wash and it is utter trash. Always breaks again eventually and have to reset it again which means there is nothing wrong with the washer itself.
I feel dumb for asking this, but not sure if I can add the softener inside the middle part where there is a lid... they usually are open.. HELP PLEASE!
Yes, there's a dispenser on top of the agitator (middle part). There should be something about "fabric softener" printed on that part. However, fabric softener is terrible for the machine. I would avoid using it.
Is it normal in the older model I just bought it to have water no inside the drum but when I spin it. It’s not draining my clothes properly and Lowe’s has the 48 hours return policy. Hasn’t even been a month since purchased :(
Hello. Did you buy it new? If so, I would call GE because it's still under warranty. If not, the two most common problems are the lid switch (easily replaced) or software upgrade (you have to buy a GE module for this).
@@l10ydchristmas I purchased it from Lowe’s mid April I will have to call GE, thank you!
@@Eleventwentytwo you're welcome. Anytime.
Mine will not fill up with water.
Same
@@jspencer198526 my son figured it out. You have a fill and spin setting on your washer? Turn it to that and start it back up
How do I know if I have any error codes? Thanks.
How do you read error codes?
Bens Appliances and Junk has a good video on this.
Mine fills and immediately drains. I am not loving this washer 😓
Hello. The two most common problems are the lid switch (easily replaced) or software upgrade (you have to buy a GE module for this).
@@l10ydchristmas thank you 😊
@@ceceliavoss9075 You're welcome.
Same problem here. I'll let you know if i fix it.
This machine is a pos
Thank you!
You're welcome.