Truck bed liner paint job, full exterior DIY
Вставка
- Опубліковано 30 вер 2024
- a DIY spray on bed liner on the exterior of a truck plus spray lining the bed itself at home. Showing how to do a spray bed liner from start to finish including prep work.
4-5 Gallons of product were used to do the whole truck.
Air compressor was started at 25 psi then adjusted as needed up/down in pressure to get the correct spray. Each compressor runs different CFM at different pressures so a be-all end-all pressure isn't a thing (For those asking what pressure is used). You basically have to test spray and adjust as needed. Humidity also plays a role.
Products used:
Bed liner (4-5 gallons)
amzn.to/3wTZme2
Surface prep spray (1-2 cans)
amzn.to/3NIgYiy
Spray gun
amzn.to/3wX5Yr2
Painters tape
amzn.to/38ZfUYV
Respirator mask
amzn.to/3t2I3oM
![RAPTOR LINER PAINT JOB - How To Paint Your JEEP or 4WD With U-Pol Raptor Liner [Full DIY Guide]](http://i.ytimg.com/vi/OYjQK2oF2W8/mqdefault.jpg)
Cool, a coworker has been talking about doing the same thing to his 91 F150.
I was searching for methods to paint over cured bedliner, clicked on this video because the thumbnail looked like my truck, and then I realized that this is my truck. I had no idea there was a video of the process. Well done man.
Still hold up?
why did the dude key it
That’s funny 😂
@@Room1sixtyfive mine has idk for like a year 🤷🏿♂️ well see
Well it's obvious the guy who sprayed it, doesn't know basic techniques for spraying large objects or detailed work.
You don't stop the spraying in the middle of a section/panel. You go all the way to the end. Otherwise it's likely to leave buildup of thicker material or paint in middle of the section. For even layering.
why wouldn’t you mix the paint with the bedliner?
The fact that at 4:34 the guy spraying it shows off his CCW while painting is my favorite part of being American... 🤣👍
I saw it too hahah
You don't need one in places with freedom see your local laws
At first I was like, “why is he slow motioning this?” But then it got sort of hypnotic. Thanks for this video. You guys did a good job.
Doing a crazy drag truck build and using bedliner for the paint
Bed liner will add drag to your truck. When inches count, bed liner will cause you to come up short.
This was so bad ass. It makes me want to do it myself rather than paying for it. I spray paint and sand furniture....I just might be up for the challenge.
I feel the same lol
I think i would have sanded it some more with some corser paper.
Thanks! will try out on the next one
How long will this stay on without pealing off etc especially in the winter time up here in Chicago? Would spraying 2 coats of primer help with that ?
So far 4 years going strong on his jeep in ohio winters with ohio salt.
how much liner did it take to do the entire truck?
In case anyone is interested for a little more money you can get raptor liner brand bed liner that is tintable. You just add some of your choice of color of base coat paint and mix.
Thanks!
Use black primer for use less coating material
This guy didn’t do a damn thing to prep that surface, he has no experience spraying and he’s not getting that shit to flow outta the gun right turn it off if you wanna learn this process
Beautiful work it’s all about prep work!
would have been easier to just use a tintable kit
Why?
Same product but the tintable version add the color you want to the product and painted once.
You're done.
Seeing the primer through the brine looks terrible.
I thought you were going to line the pig and chickens as well
Phucking phenomenal dude! Out phucking standing!
I've been wanting to do this to my e-bike for the longest.
What's the name of the adhesion promoter and where can I get it? Thanks
Who care about mpg lol
Looks great! What pressure was this sprayed to achieve this texture?
25 psi
Its the paint not the air pressure.
Was this the rustoleum bedliner on the exterior as well? Or was it a different brand?
Good question
Raptor bedliner. So far and extremely beyond any other spray in liner. Make sure u get the sand off it, or it'll never leave O.O
instead of painting on top of the bed liner he should have just used tinted bed liner that was already the color he wanted (Gray) So it's actually better that he left it black/unpainted.
Does this guy still do bed liners? Any chance I can contact him for a quote?
You might be a redneck if you______________ paint your car with pickup Truck bed liner paint.
I have a 2010 KIA SOUL (yeah, I know, not exactly a "TUFF" kind of ride). I bought it new in 2010, and it is def showing its age, with scratches, dings, and fading. I have been thinking about trying to do something like this to it for quite a while! I don't have the means to do it myself, and I don't even know where to begin to look for someone who could do it, and do it right!
How can I contact josh? I want my car bedlined and can’t be bothered doing it myself
He’s not currently doing these jobs. Are you in Ohio?
Nice
wow i love it ...im gonna bedline my entire 2019 chevy malibu
Go for it!
Oh no
I know a dude who did white raptor liner on his civic lol. It also has a greasy hood stack with a flapper.
That looks amazing am doing my Nissan Titan in military green kinda like that black too. Thanks for the video
Why not just mix the color tint and spray it on at whole???
What compressor did you use?
How much would be needed? This is awesome and I wanna do it to my off road vw Jetta Ute project lol
You do this to a truck if you actually use it for what the truck is for. If you drive to the grocery store then don’t do it.
This will be done to my Jeep
I saw a Jeep with this and it looks bad ass. Just bought a ford super duty. Going to do that to it!
My dad recently bought an '87? 442 (T-tops etc). Previous owner blacked out the entire car. Tbh, it looks badass. Difference here is he didn't block out Everything. Most of it though
You know this guys a die hard truck man when he decided not to take over the chrome door handles when spraying 😂🥹
Hi ya! Hey I am getting ready to rework an 01 Tahoe. How do you think a Candy Apple Glitter would look over this finish? Girls need durable stuff to ya know. BTW I'm not a girly girl but there's something about that glitter red drawing me back. Thanks for the video!
How many gallons does it take to do the whole truck
4-5
How much bedliner did you use, like 1 gallon would be enough or you used more?
No 1 gallon is not enough. Used around 3 gallons
What a big mess
Omg this is hard to watch dont sray at an angle jesus
Thank you sir, great job, what brand name paint you are using?
Now crash test it
How much did he charge to do this and where is he located?
To tell you that too I don't like it how it look on that truck but I seen all the oldest one and it look pretty cool
Did you sand the whole truck? Or just put the primer in the Deep scratches N bed linered the truck after
So how has the finish faired so far?
I got a question...
How much duraliner did it take
For anyone interested they sell liners that come in certain colors, ive seen black, both Tan and green cammo colors and red. Could be more colors but im not too sure
Durabak and Raptor have many colors to choose from.
I have a 1984 Chevy Silverado. I am at the point of restoration to possibly paint the exterior or apply a wrap to it. I really like the spray in bedliner look for the exterior of the truck. Can somebody give me a general idea of about how many gallons it takes to do a typical truck and about what the cost would be if you were to have someone do it. Is it is much as a regular paint job. If someone could give me some indication, I would appreciate the input.
Good decision keeping it black. This summer I’m doing my 06 f150
Do you do one heavy coat with the bedliner? Like obviously not dripping but a thick coat or still multiple thin? And at what stage do you peel the tape off
It was a light coat then building thicker. Peel tape while it’s wet
How much gas mileage do you lose if you decide to bed line the body
How many layers did you do?
Was wondering what you used to scuff/ prep to get the bed liner to adhere to the surface?
Me too.
I prep/spray bedliner onto maintenance truck bodies for a living and we sand the areas that are going to be sprayed with 80 grit sandpaper after taping off and covering all overspray areas. Just make sure you blow off all dust and debris before you spray.
needs to be sanded with 80 grit first
How much would you say it cost in total excluding labour hours ?
Its that a free flow pressure ? From what equipmnet you setting the spraygun pressure ?
I got a question. So I bought the bed liner that you add the color it (white) if I don’t use the white will it just be black ? Or what would it do ?
Did you just apply 1 coat or did you just wait to spray more coats to get it covered evenly, thanks
anyone got any tips on how to remove it on a whole truck or atleast paint over it because i bought a truck that has a bedliner paint job but it looks bad like it’s patchy and i can see the original red color that the truck was, it’s been on it for years tho the guy said
What's something like this run ? I'm considering it.
question i don't need hardener?
I’ll do that on my 2013 4runner it’s so sick 👍
Feel bad for anyone who wants to paint it afterwards
Dont think you go back to paint after bed lining a body lol
Wow i get it if your doing a complete shitbox but that truck looked pretty decent , now you turned it into a complete shitbox, you did a quality job for sure its just that he wanted to ruin the truck is crazy to me, but to each there own i guess, good video tho
@Kevin actually I have to say once you get a chance to see this monster up close and personal you will realize he just turned this truck into a practically accident proof almost indestructible tank. I saw this on a truck at my local car wash. I was so amazed I got out while in line and asked to owner could I touch it and check it out. It's absolutely bad @$$. God willing I'm going to do this project with my son for his 16th birthday. I can't wait. We are doing all black as well. My son will have a new paint job on an old 2006 F-150 for years and years to come. Couple that with my grappling tires that are already on there. I highly encourage you to look for one in person. I think you will change your mind.
I’m currently rolling my motorhome in this. Didn’t you could spray it like that.
I been doing this as well lately it's cheaper and fast then paint.the customers usually choose the bed liner over a new paint job.
Where do you get the colors,?
@@georgecarmona1817 ebay
U think if spray over the paint works good?
@@barbarone5418 you have to scuff the panit a little befor laying down the first bed liner coat
What kind of bedliner was used on the outside?
Looked like he used the gallon can of rust oleum truck bed liner.
What brand was used for the exterior? Saving up to do this to my 2001 f250 7.3l
Herculiner I believe
love the video what grit sandpaper did he use first to scuff it up??
I did the same thing tonight 2005 Jeep Grand Cherokee Limited...
And I use 320 sandpaper
Wanted to see if he did a clear coat after spraying the truck.
No clear was applied.
What’s the protective emamel for ? Did you mix them
If you’re hunting and fishing a lot in the woods, this should help with branches and rocks! How’s it holding up?
So far so good. The bed had a spot where it flaked up, so it got touched up. It happened like the second day so I'm guessing a contaminant got on that specific spot lowering the adhesion.
@@SCAquatics Thanks! I made mistake of using Rustoleum etching primer in spots in my bed prior to spraying Raptorliner. Guess where the only spots that "popped" off, lol. I will never use that stuff again. Was wondering how the Rustoleum bed liner held up, so now I know. Cheers!
Do you know what adhesion promoters he used???
Came out really good. Do you know how many layers or coats are on it? And how much does he charge for that job? This would be great for my Jeep.
I think it was 1800-2k parts n labor. Not sure what it compares to in your area but around here just to get a bed done is 500.00. Not positive on coats (3?). I know the bed is sprayed thicker for more use.
@@SCAquatics I'm in upstate NY in the mountains. My buddy had his jeep done at a shop and he said 3k. We take the jeeps in the mud, it seems like the only problem I can see is after washing the jeeps he can't get all the debris off because of the texture. I think he's just using a garden hose, so maybe a pressure washer will clean off all the debris. If not, I don't want to pay 3k for it to look like crap after getting muddy. In that case, just roll it on and spend $200. Lol thanks for responding back.
@@brianduff4278 Josh who did this job has a jeep that’s coated and it washes off fine.
I’m in South FL. Where you guys located? Maybe I could bring mine by and you guys could paint it for me for a certain price? I’ve had two back surgeries and just can’t do things like that anymore.
Ohio
Why did you go with rustoleum brand rather than raptor?
Nice video thanks
Hi how many gallons You use
Same thing happened to me. Same kind of truck and all lol. My rhino line kit will be in today
What different bed liner was used for the bed?
Where is he? He doing this for a hustle
yeah. Ohio
Shit , In phillidephia...
How many gallon did you need for the whole truck? Doing the same thing in 2 weeks.
i think it was 4, including the bed
Damn this looks awesome
Tell me your american without telling me your american
you're x2
Love the Eric church
How much does it cost?
Wow! You have such a nice property! I want land like that sooooo badly. I am saving for my own farm, Lord-willing.
How did you go from smooth paint to the speckled, bumpy style? I have heard that if you coat a truck in DuraMax bedliner, it is basically bulletproof. Any idea if this is true, or how to make it so? I do know if yoy fill your home walls with gravel it'll do the job.
Will be nice not to spray the harmful chemicals in to the ground why not to use a 5 gallon bucket to test or clean the tools. The rest was very good but our planet and water has to be taken care of.
Shut up
Can somebody tell me what spray he was using at 4:38? I am planning the same project for my truck and I want to make sure to get the steps right
It’s adhesion promoter. Used on plastics
I've always wanted to do this. I had an 83 full size Blazer that I wanted to do in and out this way. Have even considered doing it to my 2007 durango 4x4.
Do it!
what size compressor was used or recomended?
He has a 75 gallon compressor. I would recommend one that can supply the CFM of the product recommendations.
@@SCAquatics how many gallons were needed for the whole truck
@@joshlatcha9540 around 3-4
@@SCAquatics how many for just the body not the bed
@@joshlatcha9540 unknown. Let’s guess 3
I don't know I think I like it in black, but have seen it in Red.
Not into the texture. Cool idea but too gritty for me
What psi did you spray the bedliner on with love the texture
60psi
Wanting to do this with my 1989 suburban just don't know if it's worth it or not
how many cans /tins /litres do you require to paint the whole car?
4-5 gallons
She's gonna be warm in the summer.