It has really done well. The only reason any of it that chipped is the chrome bumper because it was hit. Other than that, it's great. The only issue is I park under trees the majority of time, and because it is textured, it holds onto organic material that then leads to mold and other things. So have to scrub it or not, park under tree and keep in shaded area
I love that you sprayed the wheels as well. I've thought about doing that, but I was concerned that tire mounting machines would scuff it. How has your experience been with this?
Recommend having balanced before spraying. The orher issue is when you have them balanced in the future if they put front rim side weights can cause issues
Should anyone prime the truck first? I noticed you didnt. I am debating on doing tuis liner spray on my 2006 f350 dually, and i got that same 2010 front end on mine, lol. Love it. Any need for primer first?
I don't see why you would need to add that additional step. If you prep it right will do just fine. That's awesome love the 08-10 front end. Thanks for comment and supprt
Ive been waiting for 3 weeks to do mine because of weather, it keeps raining. I heard that Raptor is not supposed to get wet for a couple days after you spray it. This video makes it seem like it does not ruin it. Hmm
the darker it is the more it is likely to fade. I am sure it has faded some. They say you can clear it and it wont fade. I believe just clean it and respray it but not certain. If done right it can help the vehicle but to be honest not sure it can protect it since the nice body is now coated. Also if not done right rust forms under the layer. Good luck thanks for comment and support
Hey there. Thinking about doing this to my truck. I have no idea really of what I’m doing, what kind of sandpaper should I use and how do I mix the colors
It's pretty simple to mix we go over it in the video. Also I'll put the link to the sand wheel we used below. Thanks for comment and support. Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
The amount of people that sand paint and breathe it in w/out protection is just crazy to me. And I was raised on a farm where we were dangerous most of the time.
@adventureswiththegaut1718 are you doing 2 colors or just one color. We used 9 of the tintable and 3 of the black. The excursion wheel base is about the same. But you have a bed and it has the back. So will be close for sure. Good luck.
I'm about to do my 06 Burb in this exact same color combo. It looks awesome! I have to go all the way to bare metal though (water based primer from factory), any suggestions on how to remove all that as quickly as possible?
What kind of ride is that. Yr make and model? It that going to be a bug out ride. Or just a fun ride. Wondering why you choose this one. I know it's a Ford. But that's it.
I have a f350 crew cab long bed I am going to be doing soon. you said you did 1 light coat on the whole ex with 4 bottles, How many did you end up using total? 8? or more? I will need a little less since I dont have that big roof to paint.
First & Foremost; SEMPER FI Brother 🇺🇸 Secondly; I want to do my GMC Canyon in same 2 tone Dark Grey with Black Trim! How did it take on the rims & how many coats? Did you paint all the trim with Raptor Black too?
Hey love it semper fi devil. We did 3 coats with all colors. Gotta scuff wheels frist and recommend adhesion promoter. Thanks for the comment and good luck
We used 9 qts of tintable and 3 qts of black. We also did 3 coats with the final being a mist coat. Good luck and let us know if you need anything else.
@@JMRRebuilders Thanks for the quick reply! I have a 2003 Excursion that I swapped a 6.7 Cummins into it . The raptor liner will finish it out just right!
So you guys did only 1 coat when noting the spray was light? Did you do 2 just not show it. I am doing a ram 1500 crew cab in a 2 tone. So I can get away with 4 quarts for top and 4 for the bottom.
We actually did a total of 3 coats. 1 coat is intial coat. Then apply a second and the third coat is a mist coat with higher psi and a further distance off of the truck to mist over coat. Good luck brother. Thanks for comment and support.
Esch kit does not equal a coat that's not how it works. We purchased 3 gal of tintable and only used 9 parts of the 12. We also ordered gal of the black and used only 3 parts of that gallon
After watching the first 5 seconds i realized these were not my people.......and also extrmely impressed you can be this......"simple".....and still make it to this age in life.
Spend some money and get some real extension cords and the grinders won’t smoke. Those extension cords are fine for Christmas twinkle lights not for power tools
That might be the case but worked fine with the 7" grinder with no issues. We believe the issue was the fact we were using a 6" head on a 4.5 tool. Thanks for comment and support.
Bro take a recording of that boy scream out your page name.. and at the beginning of every vid you make. Use his voice reading out your all's name. Have him scream it just like he did at the end of your video. If he said your name at the end. Then I'd use that very one. Peace guys godbless you all. Best of wishes. And ty for this video. I'm wanting to go buy a brand new zr2 bison. And yes paint it completely with raptor paint. What you guys think of that. Yeah or nah?? Swear I like this stuff so much. I'd like to open a raptor paint shop. Don't know if there's money to made there or not. Why didn't you put two coats on there. And is that black or gray color. It looks gray but it's still bad to the bone.
It's grey on the body but black on bumpers and wheels. We love it for sure. Super easy and makes a great product. We did 3 coats total maybe we didn't include it all. Not sure what a zr2 bison is but would be sick no matter what.
That is def a perspective. Honestly there are parts Im not happy with but that is our fault not the product. However it has now been a year and half and I still freaking love it. Would do it to anything that you want that more aggressive look and not worried about the pretty paint job
@@JMRRebuilders you sprayed right over the emblems. It’s streaked to hell. Its fine for a hillbilly job, but damn you’re acting like you’re experts in the video. Some attention to detail and you’d be golden.
Ya think maybe we sprayed over the emblems on purpose. Talk about attention to detail it is an 08-10 super duty front end and has powerstroke badges. It's not a powerstroke so why not paint over them. Also it didn't run anywhere paint turned out great. We ain't professionals at anything brother just some friends trying to help others and have a good time. Seems like ya may need some happiness in your day home.
@@JMRRebuilders you speak the truth brother. I dont mean to come down on you personally. Im really just frustrated with the lack of value that people place on quality work these days. I wish I had a youtube channel that earned some side income, but im just chasing big jobs that end up not paying after i’ve done the work. I guess it’s jealousy. You and I would probably be friends if we met in person. All the best!
Hey man. We appreciate that. We love doing the channel.... just to set the record straight. We are making just over a hundred a month doing youtube.... not thousands. We are trying to build a community of people just trying to get after it. Also.... the raptor looks streaky until it drys. Thanks for the comment!
These guys are REAL!
great job!
Thank you we appreciate the support
That look's so good ,if I didn't know better, I would think ya'll new what you were doing. he he. Thumbs up
Thanks. It really turned out amazing. We appreciate the support
The ability 2 adapt push through solve problems and keep it moving salute to u gentleman
Thanks brother that's truly encouraging and a really different perspective. We appreciate the support
Good to see you boys! Hoping all the crazy weather passed you by! Keep up the awesome work!
Heck yeah brother thanks for the comment and support. We made it through unscathed. Thanks brother and keep getting after it
Ty for your service and sacrifice
Yeah man no worries. Thanks you for comment and service. Check out our other content.
Just did mine in black, personally I love how y’all’s looks with the two tone!
Heck yeah thats awesome. We also prefer the 2 tone. It's the contrast. Thanks for comment and support
It cost about a grand to do it all. Thanks for comment and support
Well done boys, Mr. Safety is at it again. When all else fails get a bigger grinder. Truck looks mean like it’s owners. Keep getting after it.
Heck yeah brother. Thanks for the support.
Dude this is gunna be an AWESOME dad ride!! 🇺🇸🇺🇸🇺🇸
Heck yeah they call them the dad van. I love it.
it came out really nice. normally I'm not a fan for bed lining a complete vehicle
Thanks brother we appreciate the support. It Def depends on the person. Keep getting after it brother.
Thank God nobody died. Turned out great! Music: 10/10
Yes we are thankful to our Lord and Savor that there was no serious injury. Thanks for comment and support
Brother those big grinders will wear you out. 😂 I felt your pain 😢😂.
Heck yeah brother they got some torque on them for sure. Thanks for comment and support
Looks great. I'm about to do my 97 Wrangler. Wish me luck!!!
Heck yeah brother do it. You will love it. Good luck
I would never in a million years do a job like that without a respirator. Y'all are nuts.
Thanks for comment and support. We appreciate the honesty.
Better entertainment than Amazon Prime, Netflix, CNN, and Fox combined…thanks UA-cam
Heck yeah brother thanks for the kind words gladnyou enjoyed it. Check out our channel for all our other builds. Wo glad you found us.
You guys are hilarious , subscribing for sure! 😂
Heck yeah thank you so much for the sub and kind words
Good job guys!!!!!!!!
Thanks brother and good luck to you on yours
Where did you get that red wire wheel, I have a Crown Vic I want to spray, thank you
From Amazon we love it. Here is the link. Good luck
amzn.to/3xh0LLK
looks great! I use raptor on my jeeps bumpers, and fenders. Did you notice a big difference using the adjustable gun versus the shutz gun?
It's much better with the pattern control and overall better spray. Thanks for comment and support
Awesome Video!! I'm gettin' ready to do a Tahoe in white and black!! Thanks!
love it good luck. Thanks for comment and support
How is the bedliner paint holding up? Will it last or does it start to chip?@@JMRRebuilders
It has really done well. The only reason any of it that chipped is the chrome bumper because it was hit. Other than that, it's great. The only issue is I park under trees the majority of time, and because it is textured, it holds onto organic material that then leads to mold and other things. So have to scrub it or not, park under tree and keep in shaded area
I love that you sprayed the wheels as well. I've thought about doing that, but I was concerned that tire mounting machines would scuff it. How has your experience been with this?
Recommend having balanced before spraying. The orher issue is when you have them balanced in the future if they put front rim side weights can cause issues
Should anyone prime the truck first? I noticed you didnt. I am debating on doing tuis liner spray on my 2006 f350 dually, and i got that same 2010 front end on mine, lol. Love it. Any need for primer first?
I don't see why you would need to add that additional step. If you prep it right will do just fine. That's awesome love the 08-10 front end. Thanks for comment and supprt
Looks great 👍🏼 thanks for telling us about the FB group.
Heck yeah thank you for the support and comment.
Great job
Thank you for the compliment. We appreciate the support.
Ive been waiting for 3 weeks to do mine because of weather, it keeps raining. I heard that Raptor is not supposed to get wet for a couple days after you spray it. This video makes it seem like it does not ruin it. Hmm
It's not ideal for sure. We haven't had any issues since we sprayed it. Good luck. Thanks for comment and support
Its literally on the raptors instructions.
Good job. How many coats did you guys do? How many quarts for everything? I'm going to do this to my 01 XJ in a month or so.
Thank you. We did 3 coats the final coat is a mist coat. It took 9qts of tinatable and 3 qts of the black. Good luck.
Does it fade over time ? If it does fade could it be repainted without sanding entire thing again? Looks like it might protect vehicle from rust
the darker it is the more it is likely to fade. I am sure it has faded some. They say you can clear it and it wont fade. I believe just clean it and respray it but not certain. If done right it can help the vehicle but to be honest not sure it can protect it since the nice body is now coated. Also if not done right rust forms under the layer. Good luck thanks for comment and support
Did you guys do the 08 front clip conversion? Or was it someone else. Oh and does it have a 6.4 or 6.0?
We did the swap our selves we have videos on the channel. It's the 6.8 v10 in the excursion. Thanks for comment and support
Hey there. Thinking about doing this to my truck. I have no idea really of what I’m doing, what kind of sandpaper should I use and how do I mix the colors
It's pretty simple to mix we go over it in the video. Also I'll put the link to the sand wheel we used below. Thanks for comment and support.
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
Hey guys what was the color that y’all mixed in with it ? Thanks and looks awesome !
We used the excursion factory color. I can't remember at the time. Thanks for the comment and support brother
The amount of people that sand paint and breathe it in w/out protection is just crazy to me. And I was raised on a farm where we were dangerous most of the time.
Yeah brother let's go. Thanks for comment and support
did you remove the plastic sidings? or just painted over (i'm doing an excursion repaint myself soon)
I removed all the plastic cladding. I don't care for it at all. Good luck. Let us know if you need anything. We appreciate the comment and support
Bad ass!!
Thanks brother we freaking love it.
Looks great. What color did y'all use? Wanna spray my son's 98 4 runner please.
thanks for the comment we appreciate the support. We had the factory door code form the excursion made into a gallon and used it.
@@JMRRebuilders Thank you!
How many cans did you used to paint the truck??
I believe it was 9 qts of tintable and 3 qts of black. Good luck.
Do you think I would have enough with 8 bottles for a 99 F250 superduty shotbox with the half doors ?
@adventureswiththegaut1718 are you doing 2 colors or just one color. We used 9 of the tintable and 3 of the black. The excursion wheel base is about the same. But you have a bed and it has the back. So will be close for sure. Good luck.
@JMRRebuilders just going to stick with the black
I got 8 bottles I hope it's enough lol
@@adventureswiththegaut1718rgr. Black is prone to fade.
@JMRRebuilders I ordered 12 bottles of it hahaha should be good to go. Hopefully it will last awhile before it fades 😪hahah
I'm about to do my 06 Burb in this exact same color combo. It looks awesome! I have to go all the way to bare metal though (water based primer from factory), any suggestions on how to remove all that as quickly as possible?
That's sounds awful. I think they sell strippers and such for that but never had to do that so not sure. Thanks for the comment and support.
What a workout. You dun good.
Heck, yeah, brother. Let's go. Thanks for the comment and support.
I really want to do my 2005 grand cherokee with Im thinking white or light olive drab
Do it. You will love it. Let us know if ya need anything good luck. Thanks for comment and support
Where did you get the brush for the grinder? All the kits I’ve found don’t come with it.
Here is the link good luck.
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
@@JMRRebuilders thanks!!
Absolutely
What is the red attachment u have on the grinder and by the way the truck looks great
Thanks brother we appreciate the support and comment. Here is the link to the wheel. It makes life easy.
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
What is that first red attachment wheel?
It is a sanding wheel. Here is the link and thank you for comment and support
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
OSHA approved work shoes - at 0:41 🤣
Absolutely safety third. Let's go. Thanks for comment and support
What was your psi setting? Thanks
Hey brother thanks for reaching out. We did 80psi on the gun and 120 on the tank. Thanks for watching and the comment.
@@JMRRebuilders thanks so much.
Absolutely good luck
Looks great! Did you end up spraying more then the initial 4 quarts?
Thanks for watching. We used 9 bottles of the tintable raptor and 4 bottles of the black. Let us know if ya need anything else.
How much raptor liner was needed for the whole vehicle. Have a 95 chevy silverado k1500. Wondering how much i need because i also have a camper on it
@Isiah Adderley hey brother we used 9qts of the tintable and another 4 qts of the black. Good luck
Dang guys put on some respirators next time
I believe jason who was spraying had the respiratory on the whole time. Thanks for comment and support
What kind of ride is that. Yr make and model? It that going to be a bug out ride. Or just a fun ride. Wondering why you choose this one. I know it's a Ford. But that's it.
It's a ford excursion. Largest suv ever made. Can tow 12k lbs and some models could hold 9 people. Thanks for comment and support
I have a f350 crew cab long bed I am going to be doing soon. you said you did 1 light coat on the whole ex with 4 bottles, How many did you end up using total? 8? or more? I will need a little less since I dont have that big roof to paint.
I believe if I remember correctly, 9 total. Thanks for commenting and also Def send us pics when done would love to see it
First & Foremost; SEMPER FI Brother 🇺🇸 Secondly; I want to do my GMC Canyon in same 2 tone Dark Grey with Black Trim! How did it take on the rims & how many coats? Did you paint all the trim with Raptor Black too?
Hey love it semper fi devil. We did 3 coats with all colors. Gotta scuff wheels frist and recommend adhesion promoter. Thanks for the comment and good luck
How many quarts did you use, and how many coats
We used 9 qts of tintable and 3 qts of black. We also did 3 coats with the final being a mist coat. Good luck and let us know if you need anything else.
What is that sanding wheel?
Hi thanks for the comment and support. Here is the link.
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
How much raptor liner product was required for this project?
We used 9 qts of tintable and 3 qts of the black. Good luck.
@@JMRRebuilders Thanks for the quick reply! I have a 2003 Excursion that I swapped a 6.7 Cummins into it . The raptor liner will finish it out just right!
I love it. I want to body swap the body omof our ex onto a 6.7 f350 frame. Someday I guess
How much did it take? Going to do my 2000 Excursion
It has done great and is holding up well. Good luck
but how many bottles did it take? @@JMRRebuilders
9qts of tintable and 3qts of black. 3 coats on body. The 3rd coats a mist coat
how much color tint do you need? amazon doesn't really say
3oz per mix. When you buy the tintable it is already filled to meet the tight mixture of hardener and tint. Good luck and let us know if ya need help.
So you guys did only 1 coat when noting the spray was light? Did you do 2 just not show it. I am doing a ram 1500 crew cab in a 2 tone. So I can get away with 4 quarts for top and 4 for the bottom.
We actually did a total of 3 coats. 1 coat is intial coat. Then apply a second and the third coat is a mist coat with higher psi and a further distance off of the truck to mist over coat. Good luck brother. Thanks for comment and support.
So you guys used 3 kits or a total of 3 gallons. @@JMRRebuilders
Esch kit does not equal a coat that's not how it works. We purchased 3 gal of tintable and only used 9 parts of the 12. We also ordered gal of the black and used only 3 parts of that gallon
We only used black on bumpers and wheels
Well, so much for not getting it wet the first 24 hours 😂😂😂
Yeah, it didn't exactly go as planned or desired. However, it has done just fine. Thanks for comment and support
@JMRRebuilders sprayed my F250 yesterday and not even 12 hours later it POURING rain lol 😆 🙄
@chriss.7556 well that flippin stinks. But that how it is sometimes. How did it turn out?
The problem with the grinder was written on the sides
Yeah had nothing to do with the fact we had a part on it twice the size it is rated for. Thanks for the comment
What psi you shooting?
First and second at 80 and final mist at 100. Thanks for comment and support t
@JMRRebuilders thank you
Is the higher the psi the smoother the texture?
@@allan2502 yes it does.
@JMRRebuilders ok thank you so much...keep the video's coming your doing a great job 🤙
Thanks brother
After watching the first 5 seconds i realized these were not my people.......and also extrmely impressed you can be this......"simple".....and still make it to this age in life.
Well not sure to take thst as a simple compliment or not. Either way thanks for comment and support. Check out our other content.
Spend some money and get some real extension cords and the grinders won’t smoke. Those extension cords are fine for Christmas twinkle lights not for power tools
That might be the case but worked fine with the 7" grinder with no issues. We believe the issue was the fact we were using a 6" head on a 4.5 tool. Thanks for comment and support.
Ole Joe an extension cord expert. Could thing we got guys like you in the world joe
Bro take a recording of that boy scream out your page name.. and at the beginning of every vid you make. Use his voice reading out your all's name. Have him scream it just like he did at the end of your video. If he said your name at the end. Then I'd use that very one. Peace guys godbless you all. Best of wishes. And ty for this video. I'm wanting to go buy a brand new zr2 bison. And yes paint it completely with raptor paint. What you guys think of that. Yeah or nah?? Swear I like this stuff so much. I'd like to open a raptor paint shop. Don't know if there's money to made there or not. Why didn't you put two coats on there. And is that black or gray color. It looks gray but it's still bad to the bone.
It's grey on the body but black on bumpers and wheels. We love it for sure. Super easy and makes a great product. We did 3 coats total maybe we didn't include it all. Not sure what a zr2 bison is but would be sick no matter what.
Murphy’s Law
Yeah brother for sure. Thanks for comment and support
Omg the background music, had to watch on mute
Well we appreciate the support glad you watch it anyway. Let us know if you need more info or help. Keep getting after it.
@@JMRRebuilders likewise!!! 🙏🏼 Merry Christmas
Nothing at all lol
Thanks brothers
Must not look that great. Why not do a close up?
That is def a perspective. Honestly there are parts Im not happy with but that is our fault not the product. However it has now been a year and half and I still freaking love it. Would do it to anything that you want that more aggressive look and not worried about the pretty paint job
Just use air tools
Yes that is one approach. Thanks for comment and support.
Stupid is as stupid does.... .
Yep and here you are doing that. Thanks for the support
That's some jake-leg garbage.
Not familiar with that phrase.... but im assuming you don't like something. Well thanks for helping our our channel by leaving a comment!
@@JMRRebuilders you sprayed right over the emblems. It’s streaked to hell. Its fine for a hillbilly job, but damn you’re acting like you’re experts in the video. Some attention to detail and you’d be golden.
Ya think maybe we sprayed over the emblems on purpose. Talk about attention to detail it is an 08-10 super duty front end and has powerstroke badges. It's not a powerstroke so why not paint over them. Also it didn't run anywhere paint turned out great. We ain't professionals at anything brother just some friends trying to help others and have a good time. Seems like ya may need some happiness in your day home.
@@JMRRebuilders you speak the truth brother. I dont mean to come down on you personally. Im really just frustrated with the lack of value that people place on quality work these days. I wish I had a youtube channel that earned some side income, but im just chasing big jobs that end up not paying after i’ve done the work. I guess it’s jealousy. You and I would probably be friends if we met in person. All the best!
Hey man. We appreciate that. We love doing the channel.... just to set the record straight. We are making just over a hundred a month doing youtube.... not thousands. We are trying to build a community of people just trying to get after it. Also.... the raptor looks streaky until it drys. Thanks for the comment!
Ваша покраска ужасная((
Awesome thanks for the comment and support.