Cobradriver99 you’re right. They’re sensitive. People who don’t know what they’re doing tend to blow them up. A proper tune with the torque curve stretched out along with high pressure fuel pump internals is a must. Can’t just throw mods at the car and expect it to run good. Oh and a kozmic oil catch can helps relieve crank pressure a ton
Cobradriver99 yeah yeah. I’m not Denying that they don’t blow up. Zoom zoom boom is a huge thing in the mazda community. But, we always know what to blame when it happens. The people that encounter it are the same ones doing 5th gear pulls under 3k and wondering why they bent a rod. Or anyone that pushes past 400tq on the stock block with a shit curve. Or runs trash Cobb ots maps. So many different variables. If the owner of the car isn’t aware, then yes. They’re very prone to blowing up. Btw my car has been tuned since 10k with bolt ons. 52k I started running e30 along with an aggressive tune. I’m currently approaching 85k and the car tested 180+ compression across the board 2k miles ago.
Exhaust Sports Auto thanks man. His bmw is actually way faster than me now. 3-4 cars faster. We never made a vid when we had the chance. But now he’s in the process of upgrading the turbo so it’s gonna be crazy. I need to make more vids soon
Wannabe Tuners the n54 is stronger when modded compared to the n55. Twin turbo vs 1 slightly larger turbo on the n55. I'll be posting a vid with an n54 when I can find one down to race :)
Wannabe Tuners just much less potential than a n54. The weight difference alone gives the ms3 an advantage assuming ~330whp with a e-blend....an n54 on an e blend with full bolt ons is ~450whp/500wtq, a n55 is ~360whp/450wtq roughly. On regular pump the n55 is probably less than the speed3, the n54 is still close to 400whp/400wtq. Really the n55 is a cost reduction motor from the n54....lots of differences.
BMW is running map 7 on the jb4 Mods are Catless downpipe, vrsf 7inch ic, bms intake, cpe charge pipe and alpina tcu flash. Didn't brake boost either. Once I get the car tuned we will we run. Just wanted to see where my car was at compared to a tuned fbo speed3.
starlyn batista I'm running map 6 now with a tune. Different story now lol. I'm going to get mhd soon and a pure stage1 since it's super cheap compared to the stage 2 lol.
Ryan King what’s up man. Cool that you’re interested in Speed 3’s. Search for all of your questions like that though. They have been answered so many times and they’re all over the internet.
Gen 2 have a better final drive gen 1 has better trans and is lighter. No big difference in the 2010-13. Gen 1 has different parts on some stuff. Gen 1 are way better in my opinion.
Mazdaspeed3's could always hold their own in a roll. The N54s were their own monsters, but as a person who had year 1 of the 135i, full M-packaged + fbo, I'd gladly take my 15' M235i(N55) any day of the week. While I can commend BMW on owning up on the N54 issues, and not jerking around owners, the 6 x fuel pumps, multi waste-gate replacements, etc... N55 s main problem is how much it's forced to taper boost towards the top RPM bad. N54 and B58 shows what happens when stock turbos can do when they can keep that boost with tune, until you have to shift up a gear. If an N55 has any of the turbo internals replaced, not hitting peak HP 2k rpm short of redline, might be in for a treat.
DailyDriven Speed sweet!! Im waiting for my bnr s4 set up then im gettimg tuned by PD also so im exited to see what i can do. Right now i have a similar set up to yours im just running less boost
MurdaSpeed3 just subbed to you my dude. My car is down rn. New clutch and fly wheel going in right now, along with a new (used )trans. Had 2nd gear go out on me and warranty covered it! You should be able to make close to 400 with an s4 and pull hard to redline
Joe Mama lmao yeah it's my buddies old car 😂. He has a speed now, but that thing just sits in his drive way and he drives it every once in a while. It's actually really fun to drive
I'm giving it to the Mazda even though the BMW obviously had more up top. You pulled away and stayed up front from 50mph all the way up to 125ish. That's a lot of road gone by before he even started to creep on you.
Nice, I know exactly where that is area of Mexico (Spring) is. LOL! Have you run an mk7 GTI yet? Mine is stage 2 and FBO. I think it would be a good race. 👍
DailyDriven Speed Hmmm, that's interesting because that might have been me. LOL!! Down 2920 right? If so, you brake boosted on me and I can't brake boost. Haha!
Brian Carroll yeah, I'm thinking he doesnt have the twin sisters in there. I'm just not buying that a stock mazda takes a 335i bmw any day of the week...
Without reading the comments plus mad respect to ms3 off factory line but bigger cams, injectors, rail pump and tune without a turbo upgrade daily monster
I am really surprised Mazdaspeed variants as 6 or 3 didn`t became more popular, they are quite fast cars overall for less money. Here in germany it is pretty much all about VW Golf GTI and other sportive Golf variants and I can`t stand them for that very reason, besides them being one of the most blant and boring cars anyway. Everybody has them, everybody likes them it is extremly difficult to find a MPS (Mazdaspeed) instead in good condition over here.
I drove against a Mazdaspeed 3 yesterday when I saw it speeding by everybody. Never saw one before but knew it was special how fast it was going and with the air scoop on the hood. I thought I'd test it out against my Mustang 3.7L. It turns better than my car as I couldn't catch up to it very well during one, but on the straights I overpowered it. I'm not sure what year it was but mine's a 2014. He had some racing stickers on the back glass. As he got on the freeway onramp he saw I was driving up on him earlier so waved goodbye like he was gonna whoop me bad. So I get on the freeway and pass him going around 130mph. Later on in a somewhat tight freeway turn he jumped on the gas and I did so later. I was going around 110mph and him probably 115 or so I'm guessing. I started catching up again but we had to slow down due to traffic. It was a fun run. I'm thinking he has some upgrades with all those racing stickers. I personally have a modified Airaid CAI, 87 SCT tune, Triple Tred Assurance Goodyear tires, and Powerstop drilled/slotted rotors and pads for stopping power. He drove up on me after I slowed down from the 130 and was motioning his hand up and down which I assume means my car was too bouncy. Probably. I have stock springs and other such things. I don't feel comfortable in tight turns or any turns for that matter. My car doesn't handle them very well, but it's a good well rounded car and hardly have any trouble passing anyone, sports vehicles included. Had to check out this car though. Cool ride. I wouldn't mind driving one B)
You upgraded your brakes for extra stopping power? If your wheels can lock up while braking at full threshold, the brakes are 100% effective. The slotted rotors only give better cooling to eliminate brake fade (you would only get this if you were trying to completely stop at like 150 or something). What you want to upgrade to stop faster is your tires. More grippy tires means that it will be able to take more braking power without locking up.
Thanks for the info nouse. I only decided to upgrade my brakes since my dealer was saying my old ones were worn. I figured heck why not and makes the car look more sporty
Also I only have 4 bolt ons too? Turbo back exhaust, intake, FMIC, Bov! Speeds are just slow compared to a proper n55. Glad your car is running strong now.
DailyDriven Speed What a cheeky comment from him?? Speed3s are relatively quick but bear in mind the age old, no replacement for displacement. Glad to see you're a good sport about it lol
The guy in the 3 series isn't holding gear, can't drive for shit. I've owned an MPS, I now own an LCI M135i. The MPS is a dog off the line, terrible. Lots of torque steer too. Not that fast... The M135i makes it feel slow.
bro you're like the first and only mazdaspeed3 driver to roll up his window when doing a pull. Ima thumbs up your video just for that. Thank you!
Lu Ngu thanks my dude! It's the little things that make a difference
False. I do it all the time. So do over a dozen of the other tuned Speeds in my area. Statement fail, bro.
Good runs. How much was your ms3 pushing at the time?
what rear view mirror are u running
45 in 2nd or 3rd. My 2nd gen msp is at 4200 rpm at 40 in 2nd. Good runs.
Nice race buddy. Zoom Zoom
My guy sitting to far at the steering wheel on the Mazda 🤣
Sick
Imagine if this car was awd you could easily push 400 out of that i4
Yeah its called the speed 6. But im not really sure how a drivetrain dictates how much power a car can make lol
You have a huge advantage by honking, not to mention the 335i had a passenger.
Weak
Bomb ass Mazda bro. My buddy took me for a spin in his tuned MS3 before it got totaled, and man was it a blast!
J McCann thank you sir. They’re fun cars
You're cheating though, time intervals between honks should be equal, otherwise you have a huge advantage
(i'm not a bmw driver, just saying, i'm actually a huge mazda enthusiast)
Agree with you. What a jerk
Would like to see results when BMW honks and no passenger
The driver not honking has the advantage
I believe its actually the adrenaline, to be fair they counted down one time...
No wonder every MS3 on Craigslist has a new motor every 50k miles. Clean run tho
zomski101 😂 so true! Honestly these cars are just very sensitive. If you mod them you gotta do it right.
Paul Denino why are you so hurt? lol
Cobradriver99 you’re right. They’re sensitive. People who don’t know what they’re doing tend to blow them up. A proper tune with the torque curve stretched out along with high pressure fuel pump internals is a must. Can’t just throw mods at the car and expect it to run good. Oh and a kozmic oil catch can helps relieve crank pressure a ton
Cobradriver99 yeah yeah. I’m not Denying that they don’t blow up. Zoom zoom boom is a huge thing in the mazda community. But, we always know what to blame when it happens. The people that encounter it are the same ones doing 5th gear pulls under 3k and wondering why they bent a rod. Or anyone that pushes past 400tq on the stock block with a shit curve. Or runs trash Cobb ots maps. So many different variables. If the owner of the car isn’t aware, then yes. They’re very prone to blowing up. Btw my car has been tuned since 10k with bolt ons. 52k I started running e30 along with an aggressive tune. I’m currently approaching 85k and the car tested 180+ compression across the board 2k miles ago.
Cobradriver99 my buddy has a fully stock speed6 at 180k original motor. He daily it and don’t really mash on it
Nice runs,I'm tuned by PD tuning as well.
Sick was considering both these cars actually haha ended up with an infiniti G37s coupe instead awesome vids guys just subbed
-Chase
Exhaust Sports Auto thanks man. His bmw is actually way faster than me now. 3-4 cars faster. We never made a vid when we had the chance. But now he’s in the process of upgrading the turbo so it’s gonna be crazy. I need to make more vids soon
wow lol that's nuts ya u guys should make more vids get on 1320 or something lol looking forward to see what you guys have in store!
I have my bitch ready for anyone from pa.puerto Rico on the house baby audi a6 twin turbo stage 3 who say yes😎😎😎😎😎
Very impressed to see that a stock turbo ms3 can keep up with a fully bolted 335i. Awesome runs!
Wannabe Tuners thanks man! I'll be posting more vids like this
Don't be too impressed....it's a N55. But good stuff none the less.
What's wrong with n55? Sorry I don't know much about the bmw platform
Wannabe Tuners the n54 is stronger when modded compared to the n55. Twin turbo vs 1 slightly larger turbo on the n55. I'll be posting a vid with an n54 when I can find one down to race :)
Wannabe Tuners just much less potential than a n54. The weight difference alone gives the ms3 an advantage assuming ~330whp with a e-blend....an n54 on an e blend with full bolt ons is ~450whp/500wtq, a n55 is ~360whp/450wtq roughly. On regular pump the n55 is probably less than the speed3, the n54 is still close to 400whp/400wtq. Really the n55 is a cost reduction motor from the n54....lots of differences.
BMW is running map 7 on the jb4
Mods are
Catless downpipe, vrsf 7inch ic, bms intake, cpe charge pipe and alpina tcu flash.
Didn't brake boost either. Once I get the car tuned we will we run.
Just wanted to see where my car was at compared to a tuned fbo speed3.
Thanks for the comment Tim. I'm ready for our re run
JB4 BE flash and xHP is where its at brother
Yep!!! Im running 520+ rear wheel hp with Vargas stage 1 turbos and JB4 on my N54!!!!!
starlyn batista I'm running map 6 now with a tune. Different story now lol. I'm going to get mhd soon and a pure stage1 since it's super cheap compared to the stage 2 lol.
thanks for posting!
Just got my MS3 the other day. Had to fix the tire because the valve stem broke but now I'm ready to fly !!
Would like to see the ms3 run with a N54.
Loving the ms3 man!
Carlos Ramirez thanks dude!
Love your ms3. I’m trying to get one
Israel Reynoso amado thanks man!
Is that a FORD TX-3 in between the BMW and Mazda?
Hi I heard that there is a restriction from factory for the first 3 gears did you remove that
How reliable are the mazdaspeed3 in stock form? And what are the differences from 2010 to 2013? Thx
Ryan King what’s up man. Cool that you’re interested in Speed 3’s. Search for all of your questions like that though. They have been answered so many times and they’re all over the internet.
Gen 2 have a better final drive gen 1 has better trans and is lighter. No big difference in the 2010-13. Gen 1 has different parts on some stuff. Gen 1 are way better in my opinion.
What's that mirror in the Speed3?
I really want one,of these 😍😍
tyreke Sharpe they are fun cars man!
Mazdaspeed3's could always hold their own in a roll. The N54s were their own monsters, but as a person who had year 1 of the 135i, full M-packaged + fbo, I'd gladly take my 15' M235i(N55) any day of the week. While I can commend BMW on owning up on the N54 issues, and not jerking around owners, the 6 x fuel pumps, multi waste-gate replacements, etc... N55 s main problem is how much it's forced to taper boost towards the top RPM bad. N54 and B58 shows what happens when stock turbos can do when they can keep that boost with tune, until you have to shift up a gear. If an N55 has any of the turbo internals replaced, not hitting peak HP 2k rpm short of redline, might be in for a treat.
Heard good things from PD, I live in northside/spring
xxANOwnage219 Same dude!
I was neck and neck with one of these the other day .
Is the hood on the mazda stock??
what are those rims? I like them
do you know how much power your putting down?? loved the videos man keep em coming
MurdaSpeed3 thanks bro! I'll be on a dyno soon, but I'm thinking anywhere from 320-330whp. I'll be uploading a Dyno vid 🤙🏿
DailyDriven Speed sweet!! Im waiting for my bnr s4 set up then im gettimg tuned by PD also so im exited to see what i can do. Right now i have a similar set up to yours im just running less boost
MurdaSpeed3 bruh I want a BNR s4 so bad
DailyDriven Speed yeah ive wanted one for ever now i havent updated my channel in awhile but ima start again once i start getting some parts in
MurdaSpeed3 just subbed to you my dude. My car is down rn. New clutch and fly wheel going in right now, along with a new (used )trans. Had 2nd gear go out on me and warranty covered it! You should be able to make close to 400 with an s4 and pull hard to redline
Looks like the BMW is the faster car in triple digits, but the little MS3 gets the jump. Not too bad though!
Certainly. Brake boosting and that mid range power band help a lot
What is the full name / year of this mazda 3
Nice wheels, what kind are they?
Thanks man, they're katana kr19's
Is this K04 Turbo as well ? Also are you E85 mix ?
Roberto Rodriguez yes it is
Am i missing the hp specs? Whats the hp of these cars?
:( I want an MPS so badly this makes me sad
Haha love the early toot!
You stay in Houston? I got a fbo big turbo st
SlowST Channel ... bro. Imma message you on FB LOL. Did you not recognize the car?
Can't mess with that six boiiii😝
Ha nice break boost on the 45 roll. He didn't even see it coming. Pretty impressive especially on k04.
Dylan Chappell break boost or die fam
Haha can't wait i'm going e mix here soon. It's not available in my state so i gotta buy it by the drum.
Dylan Chappell that's dedication! Good luck man
Thanks man! I'll find a 335i after i'm done with the revisions and post up the vid on how i do lol
Don't worry. Next time I'll brake boost and we can do a 60 roll ;)
What paint did you use for the rear valence??
Mazdamunchies 2013 came grey from factory
you can hear the speed3 break boost every roll lol.
Nick Givens brake boost or die
lmao is that a "tuned" ford escort @ :33 Im fucking dying laughing over here..
Joe Mama lmao yeah it's my buddies old car 😂. He has a speed now, but that thing just sits in his drive way and he drives it every once in a while. It's actually really fun to drive
So the mandaspeed 3 is turbo? Stock from factory?
Oswaldo Castillo correct
I'm giving it to the Mazda even though the BMW obviously had more up top. You pulled away and stayed up front from 50mph all the way up to 125ish. That's a lot of road gone by before he even started to creep on you.
Nice, I know exactly where that is area of Mexico (Spring) is. LOL!
Have you run an mk7 GTI yet? Mine is stage 2 and FBO. I think it would be a good race. 👍
vr6gls I've race one mk7 at the wolfies meet. Black guy, grey mk7 with the dsg. I got him by a car or so. But I'm always done for a fun run
DailyDriven Speed Hmmm, that's interesting because that might have been me. LOL!! Down 2920 right?
If so, you brake boosted on me and I can't brake boost. Haha!
vr6gls bro what the heck small world. Yeah that was me
DailyDriven Speed We definitely should run again bro. I’m on a more aggressive tune now.
vr6gls can I join. I'm tuned now :)
beep............beep..beep! Your third beep is not timed right. Well played my friend. Might have to throw this into my bag of tricks.
The mazdaspeed 3 already has really high base hp, if you mod it more it only gets even better, it’s too bad they stopped making the speed 3 ):
Nice run speed3 are fast on roll races.
looks fun
How are you break boosting ? I can never seem to get it right
How to break boost vid coming soon. It's a little tricky in the gen 2. Takes some practice
DailyDriven Speed nice ! It's always a hit or miss for me , but still tend to pull on others haha
DailyDriven Speed yeah I've learned the hard way, good content , enjoy the racing vids , looking forward to that video !
Chris Rodriguez thanks man!
what the hell is wrong with that 335?? is he staying in 5th gear the whole time?
Brian Carroll yeah, I'm thinking he doesnt have the twin sisters in there. I'm just not buying that a stock mazda takes a 335i bmw any day of the week...
Bro it's a n55 BMW the garbage motor
@@jonathan_orser657 this is the weak n55 bro
the best hot hatch in my opinion
Without reading the comments plus mad respect to ms3 off factory line but bigger cams, injectors, rail pump and tune without a turbo upgrade daily monster
I am really surprised Mazdaspeed variants as 6 or 3 didn`t became more popular, they are quite fast cars overall for less money.
Here in germany it is pretty much all about VW Golf GTI and other sportive Golf variants and I can`t stand them for that very reason, besides them being one of the most blant and boring cars anyway. Everybody has them, everybody likes them it is extremly difficult to find a MPS (Mazdaspeed) instead in good condition over here.
I have e90 bmw and i like this MS3 nice car 👌
that speed3 is sick
Is that askyline at begining
MS3 had a chance cause it was an N55...never woulda hung with an FBO, Tuned, e85 N54....no chance
jonah kline which why I specified that it was an N55 at the beginning of the video lol. Different leagues
jonah kline he has no chance that I have a tune now.
Isn’t this the single turbo engine on the bmw? Those things are weak af
Whats the specs of the mazda 3?? Tuned??
ian nick mods talked about in the beginning of the vid. Also not a Mazda 3, it's a Mazdaspeed 3.
Do you have flatfoot shift in your tune and if not why?
TheJalopy80 yes flat foot shifting is enabled
Very hard on the clutch, but it's okay if you don't do it so much.
I thought speed 3s we're fast until i raced one in a stock automatic Celica lol
What a clean ms3
Thanks man I really appreciate it. Nothing crazy, just simple and clean 🤙
Peep the escort at the beginning
Pretty even cars
Man do people drive these now days? I haven’t seen one for months. Interest on this vehicle died so quickly
godkingmaximusII godkingmaximusII there’s actually a pretty huge following. Just discontinued in 2013
DailyDriven Speed while the regular Mazda 3 is currently in production
Race my n54 335i heh it will make you feel some type of way afterwards.
tokoam haha I know it will man. Even after this n55 got properly tuned it gapped me!
same gear ?
Jason Dai as in I did all these runs in 3rd gear? Yes
With the granny shifting...
Got the mazdaspeed 6. Fast cars I can say...
From wich tuner is your map bro?
daniel Ruiz purple drank
Thats what happened when I faced a mazda 3. I eventually passed him
Has the guy in the 335i ever raced before?? No brake boosting, no downshifting, and had a passenger in the car...lort 🤦♂️🤦♂️
Setup?
Reaper 95 quality bolt ons, quality tune, quality driver🤙🏿 stock turbo
bmw is pulling on ya with another passenger. no brainer
335i needs a better turbo. Too much lag
Soak that Bimmer ass MS3!!!!
Devonte Murray stfu lol this bimmer was the weakest it was a e90 n55 try a stock 335i and bye bye ms3 LOL
Mexico...right wink wink
Donnie Cupples yep! Veracruz Mexico this time around
I drove against a Mazdaspeed 3 yesterday when I saw it speeding by everybody. Never saw one before but knew it was special how fast it was going and with the air scoop on the hood. I thought I'd test it out against my Mustang 3.7L. It turns better than my car as I couldn't catch up to it very well during one, but on the straights I overpowered it. I'm not sure what year it was but mine's a 2014. He had some racing stickers on the back glass. As he got on the freeway onramp he saw I was driving up on him earlier so waved goodbye like he was gonna whoop me bad. So I get on the freeway and pass him going around 130mph. Later on in a somewhat tight freeway turn he jumped on the gas and I did so later. I was going around 110mph and him probably 115 or so I'm guessing. I started catching up again but we had to slow down due to traffic. It was a fun run. I'm thinking he has some upgrades with all those racing stickers. I personally have a modified Airaid CAI, 87 SCT tune, Triple Tred Assurance Goodyear tires, and Powerstop drilled/slotted rotors and pads for stopping power. He drove up on me after I slowed down from the 130 and was motioning his hand up and down which I assume means my car was too bouncy. Probably. I have stock springs and other such things. I don't feel comfortable in tight turns or any turns for that matter. My car doesn't handle them very well, but it's a good well rounded car and hardly have any trouble passing anyone, sports vehicles included. Had to check out this car though. Cool ride. I wouldn't mind driving one B)
You upgraded your brakes for extra stopping power? If your wheels can lock up while braking at full threshold, the brakes are 100% effective. The slotted rotors only give better cooling to eliminate brake fade (you would only get this if you were trying to completely stop at like 150 or something). What you want to upgrade to stop faster is your tires. More grippy tires means that it will be able to take more braking power without locking up.
Thanks for the info nouse. I only decided to upgrade my brakes since my dealer was saying my old ones were worn. I figured heck why not and makes the car look more sporty
Haha first he counts like... 1..... 2.3!
I have a stock n55(2011) and I raced the ms3 40,50 and 60 roll and I could’ve towed his ass so this is bs. 1st person experience 🤷🏽♂️JS
Its def bs
Torque vs caballos
1995leonelify 😂 true. My k04 set up is torque happy
We re ran, I dogged him. I thought mazdaspeed3 were fast? Ps full bolt on n55 is 4 mods lololol and I'm only on 16psi
Tim Fuentez facts. Gonna make a vid soon to show me getting gapped
Also I only have 4 bolt ons too? Turbo back exhaust, intake, FMIC, Bov! Speeds are just slow compared to a proper n55. Glad your car is running strong now.
DailyDriven Speed What a cheeky comment from him?? Speed3s are relatively quick but bear in mind the age old, no replacement for displacement. Glad to see you're a good sport about it lol
Speed3 dude can barely stay in his lane
Chaos Empire torque steer
And Mazda speed 3 is Fwd
nice mazda, im surprised mazda kick the BMW his ass
you shift fast
The guy in the 3 series isn't holding gear, can't drive for shit. I've owned an MPS, I now own an LCI M135i. The MPS is a dog off the line, terrible. Lots of torque steer too. Not that fast... The M135i makes it feel slow.
Lmao that's not how this works. Obviously the Mazda will be faster when the driver is the one telling both cars when to go. This is biased.
Your last beep is super fast. In effect you are jump starting every time
Still id choose bmw
Dude stop looking at the speedometer/RPM gauge. You are too scared of blowing up your engine?....Then don't race!
Alex Ramirez he’s taking care of the car I don’t see nothing wrong with that you probably don’t even own a car :/
ahahah this is on 99 right ??
3tap highway noventa y nueve in Mexico
FBO 335i??? I call bullshit....
What kinda bullshit countdown was that
The kind that rustles your jimmies
i beat a 2013 speed3 60 roll trying to run me off on the freeway om tuesday in my 15yr old ap1...
Dakota 38 sure you did
Impossible