How to Restore Antique German Refrigerator Compressor

Поділитися
Вставка
  • Опубліковано 6 лют 2023
  • How to Restore Antique German Refrigerator Compressor in Road Factory / Unbelievable Technology mass production manufacturing process
  • Наука та технологія

КОМЕНТАРІ • 180

  • @ioannismaximovitch7196
    @ioannismaximovitch7196 10 місяців тому +6

    Des techniciens remarquables ! 👌👍👏👏🌹

  • @MANSUR736
    @MANSUR736 5 місяців тому +3

    Fico impressionado com a habilidade e a técnica desenvolvida! impressionante.
    Esses tipos de vídeo me prende do início ao fim, como uma aula numa sala de Senai.
    - Conhecimento é tudo, e ninguém pode te tirar.
    1000 Parabéns.
    Brasil.

  • @user-xj2og5yw2x
    @user-xj2og5yw2x Рік тому +6

    Техника безопасности? Не неслышал, мерять зазор куском релетки, Немцы прослезились

  • @opanasenkoboris3140
    @opanasenkoboris3140 Рік тому +4

    Подивився відео , згадав 90 роки . Складав одного компресора з декількох.

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable comment

  • @evrosetwdg4746
    @evrosetwdg4746 Рік тому +8

    Сварщик уровень БОГ

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable comment

    • @MANSUR736
      @MANSUR736 5 місяців тому

      Inacreditável né, sozinho faz várias operações. Show.

  • @DavidHuber63
    @DavidHuber63 11 місяців тому +2

    Priceless 👍🏻❤️

  • @rombeI40
    @rombeI40 Рік тому +7

    Электрод для сварки не согнул - держать не будет...

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable comment

  • @KibromKibrom-ew9iv
    @KibromKibrom-ew9iv 10 днів тому +1

    It is good comprassor service

  • @sonnyc3826
    @sonnyc3826 6 місяців тому

    i come across these so often and now that ive seen these videos i hate to throw them out knowing they can be repaired or theyre of value to soem people. i lvoe fixing things..idk if these have much value around here but jsut for kicks id like to see if i can fix one or if they work...any ideas where to get the tester to plug in to make it blow air? thats all id need to really test these out. i have 4-5 in my yard right now..maybe soemone will find them of some use rather than me scrapping them out.. itd also be neat to learn to fix them..where to get parts and stuff..but i mean if theyre really not of great value then theres no point but some peopel find use for them obviously these guys have shops full of them.

  • @joaoalvesdesouza2812
    @joaoalvesdesouza2812 Рік тому +4

    Lindo trabalho.parabéns. assim consegue ajudar muito a Natureza e muita economia.

    • @alexnmendes
      @alexnmendes Рік тому

      Ajudar a natureza? tu acha mesmo que eles la no paquistão com essas condições otimas e trabalho estão pensando na natureza?

    • @PWorkz1
      @PWorkz1  Рік тому +1

      Thanks for your valuable feedback

    • @HurdaGemi
      @HurdaGemi Рік тому +1

      hardworking poor people

    • @ricardini7338
      @ricardini7338 6 місяців тому

      por ese lado estaria bien; pero las condiciones de trabajo, son infra humanas.

  • @mbahcarrier1629
    @mbahcarrier1629 5 місяців тому

    Pekalongan, Jawa Tengah , Indonesia..... 👍 succes

  • @eugeniosouza6633
    @eugeniosouza6633 4 місяці тому +1

    Very good!
    👏👏👏👏

  • @ribe_rus77
    @ribe_rus77 8 місяців тому

    Qal o disco usado para corte??

  • @ricardini7338
    @ricardini7338 6 місяців тому

    el dedo para arriba, es para esos Genios que hacen la tarea. solo por y para Ellos.

  • @dilawerhussain501
    @dilawerhussain501 День тому

    Hello Sr compressor chaiye tha kese mile ga

  • @GhulamQadir-js5zy
    @GhulamQadir-js5zy 9 місяців тому

    Wellcome sir Asalam o alekum Good evening you re a very great work picture very nice sir how much Compresser

  • @andrewlittleboy8532
    @andrewlittleboy8532 Рік тому +7

    How come there's so many, I’ve never known one to fail, usually the fridge/freezer is falling to pieces before the compressor has failed?

    • @orlando9giftssevenfold
      @orlando9giftssevenfold Рік тому

      True but compressors go bad too 🤝

    • @PWorkz1
      @PWorkz1  Рік тому +1

      Thanks for your valuable feedback

    • @TheTreegodfather
      @TheTreegodfather Рік тому +13

      Beats me, but that one was working just fine before he "rebuilt" it. 😬

    • @filmtajm35
      @filmtajm35 Рік тому +6

      It's a very hot country.
      The çompressor therefore has to work so much harder than eg Western Europe.

    • @orlando9giftssevenfold
      @orlando9giftssevenfold Рік тому

      @@filmtajm35 thanks for the information 👍

  • @user-nc7lw3rn7c
    @user-nc7lw3rn7c 11 місяців тому

    Estos si son unos verdaderos expertos artesanos😮😮😮😮😮

    • @ricardini7338
      @ricardini7338 6 місяців тому

      que trabajan de firma inumana

    • @user-nc7lw3rn7c
      @user-nc7lw3rn7c 6 місяців тому

      @@ricardini7338 y tu crees que puedas tener algún método mejor que ése??😲😲

  • @arfanazmi2233
    @arfanazmi2233 11 місяців тому +1

    Semangat sahabat

  • @shuaibarain975
    @shuaibarain975 9 місяців тому

    Sar cmprysar ke motar ky RPM ketny hoty han

  • @Electricmotors1155
    @Electricmotors1155 4 місяці тому +1

    nice work✅

  • @KM-vc2yp
    @KM-vc2yp Рік тому +5

    Towards the end the compressor welding process cannot be completed without safety sandals and invisible safety goggles check….

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

  • @SergeiValerich
    @SergeiValerich Рік тому +7

    Для чего менять болты в компрессоре???

    • @PWorkz1
      @PWorkz1  Рік тому +1

      Thanks for your valuable comment

    • @user-vh3lb6ic7g
      @user-vh3lb6ic7g Рік тому +4

      Я лично вообще не понял чем они занимаются. Кроме замены болтов ничего не увидел!!!

    • @benderr0driges
      @benderr0driges Рік тому +5

      @@user-vh3lb6ic7g с важным видом меняют местами бу и зарабатывают деньги на бедных

    • @orlando9giftssevenfold
      @orlando9giftssevenfold Рік тому

      👀🤝👀🌍👈👍

  • @rakhimpakisthan6612
    @rakhimpakisthan6612 8 місяців тому

    Good jobs

  • @MBaihaki
    @MBaihaki Рік тому +5

    I had my freezer compressor restored in 1985 in Zimbabwe. The mechanic had a full range of parts. New freezers simply were not available in Zimbabwe then.

  • @ricardini7338
    @ricardini7338 6 місяців тому

    Obreros de muy alta capacidad, trabajando en forma precaria con herramientas comunes haciendo trabajos de altisima calidad, y sin ninguna protección (Delantal de Plomo, Polainas, Zapatos de seguridad, protector de cuello para evitar cancer de tiroides y/o Timo.) Tealmente un nivel de EXPLOTACIÓN, que merece ser denunciado Patrones despiadados que no les importa de sus trabajadores, Verguenza del Mundo!!!😢

  • @mahomv9824
    @mahomv9824 3 місяці тому +1

    Many of these will be damaged soon due to welding spatter entering the compressors

  • @mdarojmechanic
    @mdarojmechanic 4 місяці тому +1

    thank you

  • @adriancofaru7299
    @adriancofaru7299 Рік тому

    Good for you!

  • @coldman4620
    @coldman4620 Рік тому +5

    Зачем они ремонтируют рабочие компрессора?😂

    • @ri.plashov
      @ri.plashov Рік тому +2

      Ага, я что то тоже не врубился 🙄

    • @user-ro4xo9ne1h
      @user-ro4xo9ne1h 11 місяців тому +1

      меняют медную обмотку на аллюминиевую

    • @MrMamaMaya
      @MrMamaMaya 8 місяців тому

      Я думаю, что они не ремонтируют рабочие компрессоры. В этих компрессорах есть какие-либо неисправности.

  • @orlando9giftssevenfold
    @orlando9giftssevenfold Рік тому +2

    Incredible people 👉🌍

    • @PWorkz1
      @PWorkz1  Рік тому +1

      Thanks for your valuable comment

  • @nadirkhan6232
    @nadirkhan6232 Рік тому +4

    The fart broke the screw head . He is working so roughly although he knows what he needs to do , I am sure the reactivated compressor won't last 3 months .

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @ruben_balea
      @ruben_balea Рік тому +5

      No, it was the socket wrench that came loose from the head of the screw, the height of the head of these screws is only about two thirds of that of the normal ones and since the sockets have a bit of a chamfer if they are not kept well aligned they do not grip correctly.

  • @bongdan
    @bongdan Рік тому +3

    it looked like new and worked fine why you open it....

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

  • @imanaminipersa
    @imanaminipersa Рік тому +2

    Viva gente trabajadora .

  • @tpgamingworld9886
    @tpgamingworld9886 Рік тому +2

    where is thats company??

  • @Dieselpwr
    @Dieselpwr Рік тому +2

    They use everything from those ships

  • @diestrunzenstrunz4103
    @diestrunzenstrunz4103 Рік тому +4

    Very professionell, and not working in the dirt! 👍👍👍

  • @smondal1463
    @smondal1463 11 місяців тому +1

    Recycling is good.

  • @fontaner60
    @fontaner60 6 місяців тому

    Serán estos los mentados compresores sikelan?

  • @azizadizov8808
    @azizadizov8808 Рік тому +5

    Что он сделал открыл посмотрел и закрыл)

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @maxon8566
      @maxon8566 Рік тому +1

      Болты поменял😂

    • @Evgeniy_m90
      @Evgeniy_m90 Рік тому +1

      Где статор горелый - меняет. Где клапана плламало тоже меняет. Из нескольких собирают один

  • @Hillbillyz1
    @Hillbillyz1 Рік тому +3

    I’m guessing they recovered the refrigerant in a green way.

    • @hernanmigliori1913
      @hernanmigliori1913 Рік тому

      A middle finger to the green recovery way for refrigerant. I enjoy waking up all mornings and smell the refrigerant gas.

    • @MyNotSoHumbleOpinion
      @MyNotSoHumbleOpinion Рік тому

      Same sad though!

  • @camonsamuashvili6553
    @camonsamuashvili6553 Рік тому +7

    Мотор живой был, для чего менять статор? Да и вообще - Данфросс, компрессоры вечные.

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @alegator
      @alegator Рік тому

      Там был бондаж обмотки оплавлен видно кода он статор достал! И Danfoss не вечные и летят также как и другие .....

    • @camonsamuashvili6553
      @camonsamuashvili6553 Рік тому

      @@alegator 1000 раз ставил Б/У Danfoss вместо сдохших Энбрако, ни разу не подвели.

    • @Evgeniy_m90
      @Evgeniy_m90 Рік тому +1

      Данфосы уже давно не производят. ( Их купил secop). Если говорить о данфосах до 2006г . Да они хорошие. А потом хлак пошел

  • @1suv
    @1suv Рік тому +1

    LoVE❤️❤️❤️

  • @technicalrup7322
    @technicalrup7322 10 місяців тому

    भाई आपकी शोप कहा है

  • @alexnmendes
    @alexnmendes Рік тому +2

    Não entendi que restauração é essa em que o compressor ta novinho e com pressão

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @esilvap26
      @esilvap26 Рік тому

      Aparentemente estava com alto consumo de corrente eletrica, geralmente causado por falha de isolamento nas bobinas do motor, o que causa desarme do protetor térmico.

  • @Evgeniy_m90
    @Evgeniy_m90 Рік тому +4

    Таким у нас промышляли в 90е. За неимением лучшего. Перемалывали и меняли клапана ( если нужно). Долго такое говно не проработает.

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @maxim-perepelica
      @maxim-perepelica 10 місяців тому

      Так долго и не надо иначе они без работы останутся 😁

  • @Mentoklavr
    @Mentoklavr Рік тому +4

    Где столько компрессоров набрали?

    • @imrankhanfanclub3763
      @imrankhanfanclub3763 Рік тому

      Scrap pakistan get tons of scrap from all over the world which is used in recycling

    • @vladimirzimmermann9628
      @vladimirzimmermann9628 Рік тому

      В Германии.Я тоже холодильники потрошу, часто попадаются почти новые,только газ заправить.

    • @Red_Avenger
      @Red_Avenger Рік тому +7

      Это называется утилизация. Когда из той же ЕС вагонами вывозят отработанную технику для утилизации в страны третьего мира, а сами их потом штрафуют за загрязнения и ставят в пример себя, какие они чистые и зелёные. Высшая степень лицемерия.

  • @Zeph_
    @Zeph_ Рік тому +3

    5:20 LOL he broke the screw head

    • @Zeph_
      @Zeph_ Рік тому +3

      I think someone have now compressor with just 3 screws

    • @Zeph_
      @Zeph_ Рік тому +3

      You are welcome

  • @user-st7lr8wc8z
    @user-st7lr8wc8z 9 місяців тому

    Lg frenj ki motor kitne ki new hai

  • @khazaliismail8871
    @khazaliismail8871 11 місяців тому

    دونفورس الماني تحاتي من المغرب

  • @user-st7lr8wc8z
    @user-st7lr8wc8z 9 місяців тому

    New LG moter price kya h

  • @CarlosHernandez-vx3of
    @CarlosHernandez-vx3of 7 місяців тому +1

    COMO PUEDO COMPRAR LA MAQUINA PARA ABRIR LOS COMPRESORES

    • @ricardini7338
      @ricardini7338 6 місяців тому

      es todo artesanal Amigo una fresa montada en una columna giratoria, y una base de la misma naturaleza.

  • @lordabhikingfisher8087
    @lordabhikingfisher8087 Рік тому +4

    how does one add oil to the comp? He is welding it dry

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @andrewlittleboy8532
      @andrewlittleboy8532 Рік тому +2

      I was wondering the same thing, I thought these had oil inside?

    • @scuffieduffie
      @scuffieduffie Рік тому +1

      @@andrewlittleboy8532 They once had yes.

    • @jakleo337
      @jakleo337 Рік тому +6

      It's added with the refrigerant gas.

  • @eadge1999
    @eadge1999 4 місяці тому +1

    it was working fine from first moment😂😂😂

  • @peterammann4500
    @peterammann4500 Рік тому +3

    Bei1:55 lässt er das FCKW ins Freie😡

  • @Lelik365
    @Lelik365 11 місяців тому +1

    Снасала трубку два раза перегнул, потом пассатижами подправил.
    Такой компрессор хотя бы месяц отработает, пока трубка обломится?

    • @maxim-perepelica
      @maxim-perepelica 10 місяців тому +1

      Как раз гарантия месяц... 😁

  • @stephenowusuadjei520
    @stephenowusuadjei520 Рік тому +1

    Can someone learn from them?

  • @kelliestratton6991
    @kelliestratton6991 Рік тому +5

    Sandals can leave a small carbon footprint,while welding

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

  • @maxim-perepelica
    @maxim-perepelica 10 місяців тому

    Двигатель подозрительно чистый, должен же быть в отработанном масле ?

    • @MANSUR736
      @MANSUR736 5 місяців тому

      Não percebi isso.
      Mas que seja qual o problema ou diferença. Não existe nenhum contato externo e nem com o ser humano.

  • @SahabatSelamanya
    @SahabatSelamanya 11 місяців тому +1

    What blade used for cutting compressor?

    • @SuperArgentun
      @SuperArgentun 11 місяців тому

      Corte de metal diamantada

    • @SahabatSelamanya
      @SahabatSelamanya 11 місяців тому

      @@SuperArgentun eso es para ceramica?

    • @SuperArgentun
      @SuperArgentun 11 місяців тому

      @@SahabatSelamanya no, para metal

  • @AjaySharma-jz5bm
    @AjaySharma-jz5bm 8 місяців тому

    Good morning sir

  • @rajkumarjain8133
    @rajkumarjain8133 9 місяців тому

    Sir आपका work shop कहा है।मेरे पास 5 टन का comppresser ही है cr 72 उसको रिपेयर करवाना है
    आपका एड्रेस और मोबाइल no बताओ

  • @technicalrup7322
    @technicalrup7322 10 місяців тому

    भाई आपकी शोप कहा है ❤
    11:27 11:29 11:32 11:33

  • @bolivardiaz6865
    @bolivardiaz6865 11 місяців тому +1

    No vi q le echo aceite al compresor alguien me corrija

    • @ricardini7338
      @ricardini7338 6 місяців тому

      después lo abren de nuevo.😂

  • @shindvs
    @shindvs 8 місяців тому +1

    Why you people not answer any one

  • @shrikantdeshmukh318
    @shrikantdeshmukh318 6 місяців тому

    Where is this workshop?
    Is it in India.
    I need contact details of this vendor

  • @irham9856
    @irham9856 8 місяців тому

    👍👍👍

  • @saipouddinsaipouddin
    @saipouddinsaipouddin 8 місяців тому +1

    ❤❤❤❤

  • @koerner970
    @koerner970 Рік тому +3

    Such compressors are no longer built in Germany. They come from China, Thailand etc.

    • @h.bahrami110
      @h.bahrami110 Рік тому +1

      It's belong 1980 Germany worked for almost 35 to 40 years then restore . From inside parts I assure you it was German model .

  • @nuongcavlogs7736
    @nuongcavlogs7736 Рік тому +1

    Is there any machine to rewind the refrigerator coil most efficiently?

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

  • @user-xi8cx6eu1r
    @user-xi8cx6eu1r 11 місяців тому

    السلام عليكم ممكن رقم الجوال التواصل معاك

  • @soumenmondal7878
    @soumenmondal7878 10 місяців тому

    Address

  • @zaankhajjak
    @zaankhajjak 11 місяців тому

    جنرل اے سی کا کمپریسرکتنے میں دیتے ہو

  • @bobbynash282
    @bobbynash282 Рік тому +2

    Antique ? Sounds like their old stuff was discarded. But then it does provide compressors. I guess better than not one. Atleast their very good at their work. Providing jobs an refrigeration.

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable comment

  • @night_warrior_svetovoy_god
    @night_warrior_svetovoy_god Рік тому +6

    на кого рассчитано,хз)показуха как всегда😁

  • @user-gc2um4pn8k
    @user-gc2um4pn8k 7 місяців тому

    Bhaiya nebor bhej na

  • @animeshkayal3831
    @animeshkayal3831 Рік тому +1

    কম্পিউটার রিপেয়ারিং শিখতে চাই নাম্বারটা দিন

  • @user-tn8sg1gr7j
    @user-tn8sg1gr7j Рік тому +1

    😂😂😂 новый разбирает)))

    • @maxim-perepelica
      @maxim-perepelica 10 місяців тому

      Я тоже не заметил следов масла.

  • @Chris-yy7qc
    @Chris-yy7qc Рік тому +1

    Antique? 3:20 Allenhead Screws? BS!

  • @Skodabajnok
    @Skodabajnok Рік тому +1

    🤔

  • @user-ik3ug5uq7t
    @user-ik3ug5uq7t Рік тому +1

    мы хуже индейцев

  • @godmodeus9150
    @godmodeus9150 Рік тому +15

    a that's mah guy how the third world has such a small carbon footprint

    • @PWorkz1
      @PWorkz1  Рік тому +1

      Thanks for your valuable feedback

    • @sanjaypatil2532
      @sanjaypatil2532 11 місяців тому +3

      Good Point but not fully accurate. The Refurbishing process itself has a footprint which isn’t necessarily smaller than a new one when considering the fact the these parts do not last as long. Secondly must consider the fact that these workshops follow no green processes in disposing/recycling old parts/materials. And lastly, even advanced countries refurbish e.g. car starter motors, axel rods etc.
      Back in the days in India batteries were refurbished locally and used lead and acid was handled, disposed and/or recycled in a non-green way. But these days it’s all banned plus it makes more financial sense to have a proper factory do the recycling.

    • @sabbirhussain1571
      @sabbirhussain1571 5 місяців тому

      ​@@sanjaypatil2532ii ee zo

    • @musiclifenatureandtravelsb9178
      @musiclifenatureandtravelsb9178 2 місяці тому

      ​@@sanjaypatil2532lol so called advanced country ship waste materials to 3rd world

  • @user-wg1yq3lw9p
    @user-wg1yq3lw9p 9 місяців тому +1

    😢🎉🎉 .
    😮

  • @Den-po5py
    @Den-po5py 7 місяців тому +1

    Сварной в шлепках сваривает 😨 интересно потолочный шов он в такой же одежде может выполнить

  • @TheSachaastr
    @TheSachaastr Рік тому

    Серия не о чем

  • @venkybabu8140
    @venkybabu8140 Рік тому +2

    Why people use machine to get a good hair cut.

  • @UmeshumeshUmeshumesh-zq3dr
    @UmeshumeshUmeshumesh-zq3dr 10 місяців тому

    ನಿಮಾ ನಬರ್

  • @user-wt9zi2jo8u
    @user-wt9zi2jo8u Рік тому +1

    Он точно античный? Вроде вполне современный.

    • @user-pe3oe6nj9g
      @user-pe3oe6nj9g Рік тому

      Горшки у них еще в конце 70-х появились......

  • @saidhattouch
    @saidhattouch 25 днів тому

    😅😮😢

  • @daniaadnan1774
    @daniaadnan1774 10 місяців тому

    Address/mobile no. please?

  • @joeforte7829
    @joeforte7829 Рік тому +4

    Germany still sending all their trash to other countries

    • @PWorkz1
      @PWorkz1  Рік тому

      Thanks for your valuable feedback

    • @patverum9051
      @patverum9051 Рік тому +7

      Defective but repairable doesn't mean it's trash.

    • @Der_Kleine_Mann
      @Der_Kleine_Mann Рік тому +1

      It's still good quality. So it's worth it to restore it.

    • @drscopeify
      @drscopeify 10 місяців тому

      @@Der_Kleine_Mann I just wonder how much refrigerant is released? oh well get used to hot summer lol

  • @rahimsarvejahani2083
    @rahimsarvejahani2083 8 місяців тому

    The compressor must be assembled in a clean room.Collecting the compressor in such a dirty place makes people pay for it.Your videos aren't even worth liking🤣🤣🤣

  • @user-dl9ml2dm5c
    @user-dl9ml2dm5c Рік тому +1

    И в Россию всё это говно 😂

  • @tranngoctuanvu728
    @tranngoctuanvu728 Рік тому +1

    🧤⛑️🥽

  • @scottaskew9600
    @scottaskew9600 4 місяці тому

    Numerous OSHA violations how he doesn't burn his feet as beyond me

  • @hameedeekasor3136
    @hameedeekasor3136 Рік тому

    👍👍👍