Firstly this is very similar to another video posted just a few days ago. Then there is the pure stupidity of using the lathe to "Drill" the 8 holes in the plate when there is a Drill Press shown behind the Lathe. This is the proper tool for drilling holes and not the dangerous "Show off" stupidity shown in this video. Then what was all the "Stupidity" after 26 with another bodged weld repair and then boring the bearing housing out oversize? As with 99% of all the other so called "Repair" video's this was just another pure "Click Bait" that would never be refitted to any axle. Just a waste of time turning scrap iron into vastly more expensive scrap iron.
Apreciez mașina curată și bine aranjată și mai ales pe domnu strungar meseriaș sănătate să vă de-a domnu bayMulțumim
The thread and nut is a clever repair but the weld is suspect.
مشاء الله
Firstly this is very similar to another video posted just a few days ago.
Then there is the pure stupidity of using the lathe to "Drill" the 8 holes in the plate when there is a Drill Press shown behind the Lathe. This is the proper tool for drilling holes and not the dangerous "Show off" stupidity shown in this video.
Then what was all the "Stupidity" after 26 with another bodged weld repair and then boring the bearing housing out oversize?
As with 99% of all the other so called "Repair" video's this was just another pure "Click Bait" that would never be refitted to any axle.
Just a waste of time turning scrap iron into vastly more expensive scrap iron.
Coming from a hack with a big mouth and zero fcn skill !
the shop love your comments :)))
Ry_err9