Replacing Alternator Nissan X-Trail / Teana Fix Grinding noise by ezy2learn

Поділитися
Вставка
  • Опубліковано 5 лис 2024

КОМЕНТАРІ • 51

  • @martfame2556
    @martfame2556 2 роки тому +2

    Your instructions are clean, clear and straightforward. I love it.
    I am suspecting the alternator as the battery drains without turning on the car and when I turn on the car, it stall in idle and then stops....when I check the battery voltage after it stops....the battery voltage has gone down

  • @terrytak1876
    @terrytak1876 6 років тому +4

    Excellent detailed tutorial!! It looks like a straightforward job after watching this, I may as well replace the drive belt now at the same time! Thanks very much

    • @ezy2Learn
      @ezy2Learn  6 років тому

      You are very welcome

  • @froggy520
    @froggy520 6 років тому +3

    I just replace my alternator on my x trail following the instructions in this video . thank you for the clear instructions and details. Great help thank you...

    • @ezy2Learn
      @ezy2Learn  6 років тому

      You are very welcome :)

  • @rubensflorentino548
    @rubensflorentino548 3 роки тому +1

    It took me 2 hours but I got the job done, thanks to your very good video. Cheers from Toronto.

    • @rjl9707
      @rjl9707 Рік тому

      Toronto here. I am about to do the same. Xtrail only has 211,000km. Will take me 3 hrs in apartment parking lot.

  • @terrytak1876
    @terrytak1876 5 років тому +1

    Fantastic tutorial very detailed and easy to understand!!

  • @franckherrez4326
    @franckherrez4326 5 місяців тому

    Great video
    excellent information and excellent results ✨✨✨👏🏻

    • @ezy2Learn
      @ezy2Learn  5 місяців тому

      Thank you! Cheers!

  • @jorgemedina983
    @jorgemedina983 5 років тому +1

    Excelente video cambie mi alternador y ahorre 350 € thanks my friend

  • @artjasme1601
    @artjasme1601 4 роки тому

    thank you very much. how about this noise from alternator.it occurs while starting my xtrail and its noiser on reverse mode. do I have to change tensioner pulley or just fix the bearing

    • @ezy2Learn
      @ezy2Learn  4 роки тому +1

      Is it a grinding noise? if yes, then you can replace the bearing. If not, then it is the pensioner pulley

    • @artjasme1601
      @artjasme1601 4 роки тому

      Thanks Doc. bearing replaced.noise gone

  • @andydroid823
    @andydroid823 5 років тому

    Great video... I watched it 3x before tackling this job. The worst part of the job was at step 2... removing the bolt for the AF reservoir.... rusty and seized lol... then all went smoothly thanks for your descriptive video. BTW... is that a babe doing the work??? pretty dainty hands for a mechanic lol. cheers!!!

    • @andydroid823
      @andydroid823 5 років тому +1

      Just one item to add... you say put the belt on the water pump pulley last... I found it easier putting it on the crank pulley last as I was already down there on the tension pulley. (unless I'm mistaken by your instructions)... anyway I sure didn't beat your record of 18 minutes lol.

    • @ezy2Learn
      @ezy2Learn  5 років тому

      Hi Andy, Thanks for your comments! You are right about putting belt on crank pulley last and that's exactly what I have done on the video lol, I was mistaken by my own verbal instruction on the video and I do apologize for that. Actually I meant to say to put belt on crank pulley last

  • @anthonylaurent512
    @anthonylaurent512 3 роки тому

    Thanks from France 🇫🇷 🥰🥰

  • @Holms
    @Holms Місяць тому

    which xtrail is that? in 2005 nothing like that exists

  • @richierex
    @richierex 6 років тому +2

    always, always disconnect the earth lead of the battery first. If the spanner had slipped and touched earth, boom, melted spanner. burns etc. its a basic thing taught at mechanic school

    • @ezy2Learn
      @ezy2Learn  6 років тому

      Yes, you are completely right about that :)

  • @forbesy8568
    @forbesy8568 4 роки тому

    Thank you so much! This made the work satisfying and fun.

  • @chinochang22
    @chinochang22 2 роки тому

    Thanks for this videos it's help me a lot!

  • @khamteh29
    @khamteh29 6 років тому

    Amazingly detailed. Thank you! People can learn so much from you

  • @judeavorosi650
    @judeavorosi650 5 років тому

    THANK YOU FOR THIS EDUCATIONAL VIDEO.

    • @ezy2Learn
      @ezy2Learn  5 років тому +1

      You are very welcome :)

  • @Sam-zd1qx
    @Sam-zd1qx 4 роки тому

    Hey just wondering what year this xtrail is? Thabks in advance

  • @guyinabluetanktop1943
    @guyinabluetanktop1943 4 роки тому

    What yr xtrail is this? I have a alternator of a 2007 but my car is 2005. Everything is the same, except that the 2007 alternator rotates only one way (counter clock). thinking of using the 2007 alternator on my car. the part number is the same.

    • @ezy2Learn
      @ezy2Learn  4 роки тому +1

      hello and sorry about the delay! yes it should work fine. (alternator rotates only one way (counter clock)) that sounds completely perfect as it has inner clutch that's make it rotate one way!

    • @tiosubaktiono
      @tiosubaktiono 3 роки тому

      Tell me about the 2010 one, is it different rotation?

  • @jorgemedina983
    @jorgemedina983 5 років тому

    My friend how change bujías nissan xtrail 2005?

  • @believetatenda1798
    @believetatenda1798 2 роки тому

    Helpful

  • @tiosubaktiono
    @tiosubaktiono 3 роки тому

    It is okay, if i only change the pulley?

  • @arumugamt5234
    @arumugamt5234 Рік тому

    Thanks

  • @mysteriousturkstci4091
    @mysteriousturkstci4091 5 років тому

    Can a American Nissan maxima 2006 alternator fit and work on a Japanese Nissan teana 2006?

    • @ezy2Learn
      @ezy2Learn  5 років тому

      I didn't know there's an American Nissan. I think it should be all the same

    • @mysteriousturkstci4091
      @mysteriousturkstci4091 5 років тому

      Well I'm just asking because part for my Nissan teana is very expensive where I live and I need to match a Nissan teana alternator with left hand

    • @ezy2Learn
      @ezy2Learn  5 років тому

      My engine model is QR25DE. What's your engine model number ?

    • @mysteriousturkstci4091
      @mysteriousturkstci4091 5 років тому

      Not sure I'm at work will let you know after 5pm

  • @danisiu
    @danisiu 5 років тому +1

    my nisssan x trail having noise, if i'm running 80 or more...

    • @ezy2Learn
      @ezy2Learn  5 років тому

      it could lost of things, you need to find the source of the noise

  • @MrMonnster
    @MrMonnster 5 років тому

    i have two belts dam

  • @samirahmedov7689
    @samirahmedov7689 5 років тому

    Mersedec N1

    • @ezy2Learn
      @ezy2Learn  5 років тому +1

      It is for Nissan not Mercedes