2006 Dodge Dakota 3.7L FIXED!!! RPM/idling issue PART 2

Поділитися
Вставка
  • Опубліковано 6 сер 2017
  • Fixed my rpm idle issue!! First replaced the IAC which cost me $75 and only made my problem worse. Today I purchased a TPS sensor and removed my old one, replaced it and it completely fixed my problem!! Simple things like this that you can easily access, just do them yourself! save your money :) like and subscribe please and thank you :D

КОМЕНТАРІ • 49

  • @kowhort
    @kowhort 5 років тому +1

    You solved my problem for my an '04 Jeep Liberty 3.7L, and saved me the hassle of of running down a rabbit hole. It was the TPS. Got the part from NAPA and no screws so had to use the old screws which are Loctite in place. You should run the engine to operating temp before attempting to remove the old screws because they are Loctited at the factory and you need the engine heat to soften the old gunk on the screws. I got the screws out and reattached the TPS with old screws and fresh blue Loctite. Thanks, keep up the good work.

  • @eduardogarciamontesdeoca5935
    @eduardogarciamontesdeoca5935 2 місяці тому

    I’m seeing your video 6 years later and like you said the truck accelerates on its own when you have an automatic transmission… I’ll replace the TPS and hopefully it will fix this issue (replaced IAC and connector, still the same but no more p0508)

  • @timzauto
    @timzauto 6 років тому +3

    Good job,most people don't understand the IAC and TPS work together,common mistake,good job though,you can test the TPS on the vehicle with a Meter or your scan tool saves a lot of time,it won't throw a code most of the time that's what makes it a pain,lol....

  • @edwinquinones140
    @edwinquinones140 4 роки тому

    Well done , and very explicit . Thank you.

  • @danrandle65
    @danrandle65 5 років тому +4

    different seeing painted nails under the hood.
    But it was waay cooool.😊
    Tried getting my girls under the hood and the first time they got greasy it was over😁
    nice video,well done😆🖒

  • @erickloera6591
    @erickloera6591 6 років тому

    great job Liz

  • @tyronewalker5764
    @tyronewalker5764 4 роки тому

    I went through the same thing with my 4.7/v8. Will be replacing my tps this evening.

  • @HappyHands.
    @HappyHands. 5 років тому

    Holly Cow! A good nail job is super handy! Man I'm envious, I struggled with those connectors. LOL Great Job! It also sounds like your AC blower motor is going bad or hitting something

  • @channibal81
    @channibal81 6 років тому +2

    Thanks Liz

  • @elizabethmurphy6044
    @elizabethmurphy6044  7 років тому +4

    Thank you!!

  • @RetroRaichu
    @RetroRaichu 6 років тому +2

    Thank you.

  • @stevenstrawberry94
    @stevenstrawberry94 5 років тому +1

    Thank you 🙏🏽

  • @Rajen51able
    @Rajen51able 4 роки тому

    Thank you Liz

  • @robertyoung6320
    @robertyoung6320 2 роки тому

    Liked it .. Sweet i have the v8 no no issues. You can work on mine any time..

  • @edwardesposito64
    @edwardesposito64 3 роки тому

    What side of that throttle paddle should it be on when you put it back together? Does it matter?

  • @Lcab-bh3wx
    @Lcab-bh3wx 2 роки тому

    Those nails become handy to unlock the electric plug.

  • @dungeonsdragons1900
    @dungeonsdragons1900 5 років тому +1

    What did you use to clean up the tps?

  • @bubbablaylock244
    @bubbablaylock244 2 роки тому

    Got the same thing going own with my 06 Dakota but mine is low idle and if don’t watch it it will stall own me just wondering how you came to the tps sensor

  • @poqum9230
    @poqum9230 2 роки тому +1

    I can't find the IAC valve on my 2007 dodge dakota st, and no one has posted where it is :/

  • @williamcox2996
    @williamcox2996 2 місяці тому

    What is high rpm for this truck ? Have 07 Dakota 3.7. Only revs to 4k max

  • @NR-mo5zl
    @NR-mo5zl 5 років тому +2

    What code were you getting if you dint mind

  • @Hinokami_TT
    @Hinokami_TT 5 років тому

    Is this why my vehicle accelerates and decelerates in park? I'm having a issue with a 07

  • @f296877
    @f296877 6 років тому

    Great video thanks

  • @wheeliedart
    @wheeliedart 3 роки тому +1

    Did it remain corrected?

  • @adrianhaslerig7904
    @adrianhaslerig7904 Рік тому

    I don't know where the idle control valve is located on my throttle body is weird if you can message me back so maybe let me know thank you

  • @beatroot943
    @beatroot943 6 років тому +10

    attractive when women know things...

    • @HappyHands.
      @HappyHands. 5 років тому

      Well in all fairness most women probably do "Know" more than us guys,, but it is indeed really attractive when they have accurate mechanical knowledge or know how.

  • @dungeonsdragons1900
    @dungeonsdragons1900 5 років тому

    Was it idling low like it was going to stalling?

  • @babyboy281a
    @babyboy281a 4 роки тому

    How much did u pay for replacement parts tps

    • @elizabethmurphy6044
      @elizabethmurphy6044  4 роки тому +1

      Maybe 20-30 I cant remember but somewhere around that

    • @babyboy281a
      @babyboy281a 4 роки тому

      @@elizabethmurphy6044 ok thank you for the info😊

  • @502derbycityphysco
    @502derbycityphysco 5 років тому

    Was it throwing a code I think I have same problem

  • @adrianhaslerig7904
    @adrianhaslerig7904 Рік тому

    It is a Dodge ram pickup 2007

  • @62ejo
    @62ejo 6 років тому +1

    Next time pls show the box part number + $

  • @andrewkimble5243
    @andrewkimble5243 4 роки тому

    Hey can I call you ? I’m having the same problems.

  • @anthonyharper6349
    @anthonyharper6349 4 роки тому

    Hey l ran out of gas in my 2001 dodge dakota 4.7 magnum. Put gas in it and it wouldn't stay crunk. The RPM would drop and truck would shut down. Put a brand new fuel pump on it. Still won't start . You think my problem is the IAC????

    • @andrewkimble5243
      @andrewkimble5243 4 роки тому +1

      Anthony Harper
      Hey man I am having the same problems did u fix yours?

    • @kennethterry6453
      @kennethterry6453 4 роки тому

      I would check the fuel filter as well. You run out of gas it will pull the crap from bottom of tank.

  • @ThatRusticS10
    @ThatRusticS10 2 роки тому

    For once there's a girl that automobiles
    Girls I know don't wanna get dirty and do makeup and wear skirts and have highlights and curls in their hair

  • @emilflognoid1532
    @emilflognoid1532 6 років тому

    Does it matter which terminal you unhook? The positive or the negative, is one better (safer) than the other?

    • @HappyHands.
      @HappyHands. 5 років тому

      Its actually best to remove both. This limits the possibility of accidentally creating a circuit .

    • @michaelm3683
      @michaelm3683 4 роки тому

      Negative has less spark

    • @reginaldbowls7180
      @reginaldbowls7180 Рік тому

      Just remove the negative. Electrons travel from the negative terminal not the positive.