I’m glad to see someone show that there are cheaper alternatives to the expensive gilding glue. If your working with genuine leaf, which is very expensive, then stick with the real deal for adhesive, but if your working with imitation leaf or guilding flakes, PVA tacky glue, DecoArt paint adhesion medium, or any water based glue that says “stays tacky” works depending on the surface it also has no odor which is why I don’t like the guilding glue. On glazed ceramics I prefer the DecoArt because it’s made for slick surfaces. On porous surfaces like unglazed ceramics, wood or canvas, I seal it first with slightly watered down gesso or acrylic paint (to heavy cream consistency)and apply as smoothly as possible. After the paint drys, If you still have brushstrokes showing, try gently rubbing them out with a piece of brown paper bag, then apply the tacky glue or medium. Some helpful suggestions: the smoother you apply the glue the smoother the finish. Use a dampened softer brush to apply the glue. If your surface is coarse and you want a smoother guild, water down some gesso a little and coat the surface to fill in the pores. Let that dry thoroughly first before applying the glue. Apply the glue thinly and smooth out as much as possible. If you want texture, use a coarser brush and the way you stroke the glue on is the way the guild will show it. When the glue is tacky, lay the foil on gently with a very soft brush as smoothly as possible starting from one end on over. Pat down gently and let it rest for a few minutes, then burnish gently with a soft brush until it shines up. Fill in gaps with the pieces. If the leaf won’t stick to spots, reapply a thin dot of glue, smooth out (ok to go over edge of a guided spot) and repeat the process. Tacky glue works, tacky medium works ( but a little hard to get a really smooth finish because it’s really thick which is ok if you want that look ie: stenciling or texturizing) spray adhesive works but does smell significantly and needs to be sprayed in a well ventilated area for large projects. For small hard surface projects I use clear nail polish to top coat, other small surfaces I use Ranger Glossy Accents or DecoArt DuraClear high gloss. Large projects like picture frames and outdoor signs I top coat with Varathane ultimate Spar Urethane which is UV protective, water based, seals out water, mold and mildew and is low odor. It also comes in satin or gloss and works really well for wood.
@@sarahschwass8618 I don’t know for sure because I have never tried it, so you will have to experiment a bit. My first go to product to try would be the Decoart medium for slick surfaces.
Dear CraftyDevil, thank you for sharing that information with us. I'm going to buy a bottle of the Deco Art glue, I've used other Deco Art products before and they're all really good. Do you know if the Deco Art Medium is available from Amazon? And, is it called Deco Art Medium or Deco Art Glue? Thanks again, love from Amanda Jones in Australia
@@sarahschwass8618 a ZIG 2 way glue pen with fine tip will be perfect for lettering. I make fine gold lines on glazed ceramic pots. They also make a chiseled tip for thicker lines.
I use PVA watered down to a half and half mix, leave it to go tacky then place the leaf on, leave to let the leaf rest into the PVA, then brush for a smooth finish.
This was AWESOME! EXACTLY what I wanted to know! Simple and straightforward. I only want to add bits to collage, so no "professional" anything, just messing about so I didn't want/need to buy and special glues, you've shown me Incan just use what I have! Thanks!
Thank you, exactly what I needed to know with out extra nonsense, cats walking across the surface and discussion about anything other than the glue and how it worked!
Gold leaf adds a hint of glamour to anything it is applied to, whether that be a vase, picture frame, or furniture. To show you how to apply gold leaf. This is nice technique may be made on different surfaces.
Regarding the Sakura Quickie Glue pen - it can be used straight away as a normal glue but also will stay tacky once 'dry' like the gilding adhesive does. I use it to write or draw with and add the gold leaf much later
Many years ago, I would use a picture frame (with glass), trace or draw a picture with ink on the smooth side of the glass. Then I would use an adhesive spay and either gold or silver leaf on top of it...made for some interesting decorative pictures. Using brown or blue inks also added to the flavor.
For the kind of application you are doing I think you would be just as happy with imitation, gold leaf and spare yourself the expense of 23 or 24 karat gold as you’re using here. your video is super helpful for anyone that wants to play around with leaf, the elements you’re missing are raised gilding, water gilding, and topcoat. Obviously real gold will never tarnish so it does not require a topcoat but imitation gold leaf does require a topcoat. Additionally, the shine of the gold is very dependent on the absorbency of the surface you are gilding, and the adhesive you are using, and whether or not, you can polish it afterwards. If you do want to work with genuine gold leaf, I think you will be happy if you do just a little bit more investigation so that you can get the most brilliant glow from your gold. PS the leaf adhesive that you were using in your last sample is actually meant for imitation leaf. If you use a softer Brush, she will not get so many scratches in your gold.
Any of the cheaper adhesives work if one wants to use for something temporary. But it's one thing to use it for that short-lived purpose, and another to use it for something that is archival. Sure they all seem to work. But the most expensive one intended for art and archival use is going to last longer, far more than when the rest gets subjected to temperature and humidity factors and the adhesive starts to get removed with time.
This video was so well put together and easy to watch. I learned everything I was trying to, thank you. Do you know which adhesive works best on glass?
Thank you for posting this! I wanted to just try out gold leafing to see if it’s something I like, but didn’t want to buy the glue in case I don’t care for it. I’ll give it a shot now with glue I’ve already got:)
I know this is an older video but just in case anyone was wondering why a lot of long time users use size especially in the automotive scene is simply the act of burnishing very large areas with a powered burnisher causes the leaf to lift from some glues.
Thank you for doing this even though it was 4y ago this was helpful for me I’m adding these to my wedding invites and the pen didn’t work well for me and I’m definitely doing glue stick
Thank you so much for this video! I mean you're going to be helping all us beginners with this in years to come. I'm watching this in 2019. And wow did this video helped me breath again. One question, can we use PVA method on canvas if we want to use gold leaf in a painting? Thanks again for such informative video.
I guess the only thing that would matter when looking for glue is to make sure to check whether its archival or acidic. If you are looking to making art prints then you'd want to use the archival non acidic glue
Great video. I have been using the expensive sizing glue and have a big project. I will use white glue when I run out. NOW--what's an economical way to seal the leaf? I'm working on glass.
MaryBeth Strassel I’ve known people who’ve used clear coat nail polish or hairspray, I usually use spray sealer for around $3.00/can. Just depends on what effect you want.
T Amazon set I bought with size, it says to lay the leaves once it is tacky. When I wanted to put the leaf, it was completely dry. It does not say to wait for how long.
Nice to discover your channel. I'm looking to use some gold leaf in a drawing, so your video was very helpful. I see the paper in the video was affected by the water in the glues. Have you tried using stone paper (manufactured from calcium carbonate bonded with high-density polyethylene)? It's unaffected by water.
Elmer's Glue IS P.V.A glue.....the only glue that is. I stock up in back to school specials or Dolleramas.. Has to be Elmers !! 👍...I water down a pit to thin out the tack time for gold leafing
@@ThisDesignedThat Sorry, my friend, meant no offense. Really did enjoy your video and was quite useful. I recently began investing into arts and crafts for both personal decor and (hopefully) supplement my income and I greatly appreciate folks like you who take the time and generously share their expertise.
Thank you for sharing! I am trying to recreate the cover of a manuscript/book with organic decorations/bas-relief, and it's difficult to know whether to use metallic acryllic paint, gold leaf, or another technique, in order to get a smooth surface? It seems gold leaf does have a texture to it, depending on the quality of the gold leaf, some cost £34 for one sheet, while others cost £8 for a large amount.
I use the exact same adhesive size and it works brilliantly. Although just a warning- you added a bit too much of the size. Usually, i let the tip of my brush rest on the liquid and then paint over. The layer's so thin you can't see it but it greatly reduces any wrinkles, i personally feel. So its so smooth you can literally see your own reflection. I'm a modeller and I use a modeller's tiny brush, which I find works better than a foam brush. However the size is always clumping the bristles together. Any thoughts? :)
Hi there, I want to gold-leaf some metallic buttons I bought from amazon. I want to use them for clothing so there will be some rubbing every time they're slipped through the button holes. Is there a way to seal it in place to make sure it doesn't rub off?
how do i reduce the seam for every sheet? i want it to be more seamless bacuse im going to use it as my painting background its about 100x70 cm surface and im sure if im not applying it correctly there will be some seam between every sheet. thankyouu in advance!
I use gold leaf, and use the recommended size, it remains tacky for about 24 hours. And after applying the leaf, when dry for a couple of days, seal it with a good acrylic sealer, says on bottle, and remember , these are acid free, won’t tarnish, and won’t go black.
I’m glad to see someone show that there are cheaper alternatives to the expensive gilding glue. If your working with genuine leaf, which is very expensive, then stick with the real deal for adhesive, but if your working with imitation leaf or guilding flakes, PVA tacky glue, DecoArt paint adhesion medium, or any water based glue that says “stays tacky” works depending on the surface it also has no odor which is why I don’t like the guilding glue. On glazed ceramics I prefer the DecoArt because it’s made for slick surfaces. On porous surfaces like unglazed ceramics, wood or canvas, I seal it first with slightly watered down gesso or acrylic paint (to heavy cream consistency)and apply as smoothly as possible. After the paint drys, If you still have brushstrokes showing, try gently rubbing them out with a piece of brown paper bag, then apply the tacky glue or medium. Some helpful suggestions: the smoother you apply the glue the smoother the finish. Use a dampened softer brush to apply the glue. If your surface is coarse and you want a smoother guild, water down some gesso a little and coat the surface to fill in the pores. Let that dry thoroughly first before applying the glue. Apply the glue thinly and smooth out as much as possible. If you want texture, use a coarser brush and the way you stroke the glue on is the way the guild will show it. When the glue is tacky, lay the foil on gently with a very soft brush as smoothly as possible starting from one end on over. Pat down gently and let it rest for a few minutes, then burnish gently with a soft brush until it shines up. Fill in gaps with the pieces. If the leaf won’t stick to spots, reapply a thin dot of glue, smooth out (ok to go over edge of a guided spot) and repeat the process. Tacky glue works, tacky medium works ( but a little hard to get a really smooth finish because it’s really thick which is ok if you want that look ie: stenciling or texturizing) spray adhesive works but does smell significantly and needs to be sprayed in a well ventilated area for large projects. For small hard surface projects I use clear nail polish to top coat, other small surfaces I use Ranger Glossy Accents or DecoArt DuraClear high gloss. Large projects like picture frames and outdoor signs I top coat with Varathane ultimate Spar Urethane which is UV protective, water based, seals out water, mold and mildew and is low odor. It also comes in satin or gloss and works really well for wood.
If I wanted to write words on a dried acrylic pour, what would be the best adhesive for fine controlled writing using imitation gold leaf sheets?
@@sarahschwass8618 I don’t know for sure because I have never tried it, so you will have to experiment a bit. My first go to product to try would be the Decoart medium for slick surfaces.
Dear CraftyDevil, thank you for sharing that information with us. I'm going to buy a bottle of the Deco Art glue, I've used other Deco Art products before and they're all really good. Do you know if the Deco Art Medium is available from Amazon? And, is it called Deco Art Medium or Deco Art Glue? Thanks again, love from Amanda Jones in Australia
@@sarahschwass8618 a ZIG 2 way glue pen with fine tip will be perfect for lettering. I make fine gold lines on glazed ceramic pots. They also make a chiseled tip for thicker lines.
This was the perfect video to demonstrate exactly what I wanted to know. Without any crap in between. Thanks.
I agree entirely
YES!!! To the point and info I needed.
Yes, samee
That’s definitely not real gold leaf. 100 pack will run you about $80
I use PVA watered down to a half and half mix, leave it to go tacky then place the leaf on, leave to let the leaf rest into the PVA, then brush for a smooth finish.
Ashley
Iza
Esther
Melissa
John
Thankyou so much, better than the so called experts that just talked and talked and showed nothing.
Thank you so much for this I thought I needed fancy glue for my gold leaf. Now that we have that sorted out I can get to work!
This was AWESOME! EXACTLY what I wanted to know! Simple and straightforward. I only want to add bits to collage, so no "professional" anything, just messing about so I didn't want/need to buy and special glues, you've shown me Incan just use what I have! Thanks!
Thank you, exactly what I needed to know with out extra nonsense, cats walking across the surface and discussion about anything other than the glue and how it worked!
Lol 😂
Gold leaf adds a hint of glamour to anything it is applied to, whether that be a vase, picture frame, or furniture. To show you how to apply gold leaf. This is nice technique may be made on different surfaces.
A wonderful explanation...first time with gold leafing and glad to know I don’t have to spend a fortune on supplies! Thank you!😁
He should be using a makeup brush the brush he has it scratching up the gold dulling it out.
The video is about the glue though, not finishing.
I think he likes the roughness of it. Texture
Good eye. Especially for the shiny finish! 😉
Thanks for the tip, what's your thoughts on those silicone "brushes"? Would those do the same thing and dull the foil ? ❤
Regarding the Sakura Quickie Glue pen - it can be used straight away as a normal glue but also will stay tacky once 'dry' like the gilding adhesive does. I use it to write or draw with and add the gold leaf much later
Thank you so much! I’ve been searching all of UA-cam to find out what kind of glue to use! Exactly what I was looking for!
Many years ago, I would use a picture frame (with glass), trace or draw a picture with ink on the smooth side of the glass. Then I would use an adhesive spay and either gold or silver leaf on top of it...made for some interesting decorative pictures. Using brown or blue inks also added to the flavor.
For the kind of application you are doing I think you would be just as happy with imitation, gold leaf and spare yourself the expense of 23 or 24 karat gold as you’re using here. your video is super helpful for anyone that wants to play around with leaf, the elements you’re missing are raised gilding, water gilding, and topcoat. Obviously real gold will never tarnish so it does not require a topcoat but imitation gold leaf does require a topcoat. Additionally, the shine of the gold is very dependent on the absorbency of the surface you are gilding, and the adhesive you are using, and whether or not, you can polish it afterwards. If you do want to work with genuine gold leaf, I think you will be happy if you do just a little bit more investigation so that you can get the most brilliant glow from your gold. PS the leaf adhesive that you were using in your last sample is actually meant for imitation leaf. If you use a softer Brush, she will not get so many scratches in your gold.
Awesome video explaining what I needed to know. I’ve found it so hard to find genuine information on what glue to use, thanks!!
MOD POGE works well too
Put your gold or silver flakes on top of the mod poge and let sit for few mins and gently brush off
I have used pva glue and it works fine but i haven't tried larger (canvas) surfaces. Thank you for this comparative video. Quite helpful.
Great to know. Gonna be using gold leaf for first time and was a bit nervous. Thanks
Thank you very much! I’m a first time user for Gold Leaf.
Any of the cheaper adhesives work if one wants to use for something temporary. But it's one thing to use it for that short-lived purpose, and another to use it for something that is archival. Sure they all seem to work. But the most expensive one intended for art and archival use is going to last longer, far more than when the rest gets subjected to temperature and humidity factors and the adhesive starts to get removed with time.
Excellent points here Maria, thanks for sharing
This video was so well put together and easy to watch. I learned everything I was trying to, thank you. Do you know which adhesive works best on glass?
Thank you for posting this! I wanted to just try out gold leafing to see if it’s something I like, but didn’t want to buy the glue in case I don’t care for it. I’ll give it a shot now with glue I’ve already got:)
Trying out gold foil for the first time, this was a great video, thank you. For the explanations and demonstrations!
Thank YOU for this great, informative, easy to watch tutorial⚜️
thanks Nicole
Good video on the trying different adhesive types and how they should be applied very thinly.
I know this is an older video but just in case anyone was wondering why a lot of long time users use size especially in the automotive scene is simply the act of burnishing very large areas with a powered burnisher causes the leaf to lift from some glues.
Exactly what I was looking for!
This is exactly what I was looking for. Thank you!
Really helpful vedio for beginners. Thank you so much for this vedio.
Thank you for doing this even though it was 4y ago this was helpful for me I’m adding these to my wedding invites and the pen didn’t work well for me and I’m definitely doing glue stick
You are so welcome!
Thank you so much for this video! I mean you're going to be helping all us beginners with this in years to come. I'm watching this in 2019. And wow did this video helped me breath again. One question, can we use PVA method on canvas if we want to use gold leaf in a painting? Thanks again for such informative video.
yes u can, water it down and sieve it.
@@jungsomewhat yeah thanks. I've been experimenting. White glue works great with gold n silver leaves on canvas. Works brilliantly!
You can use an art brush and glue stick for nice application just rub the brush on the glue stick then apply to the project with brush
Great advice, didn't think of doing this :)
It's Roy Kent teaching me how to use gold leaf! ♥️
Lycandaart
1 second ago
exactly what I needed to know. This video is perfect. Thank you
Great ! You've explained how to use gold leaf very well, your narration is friendly and not intimidating - Thank you
Thank you! This helps! Definitely gonna get adhesive size glue for my upcoming gold project! It looks smooth and better! ❤️
Glad it was helpful!
I also like apply gold leaf for painting very much, your video is helpful for me. THANKS.
I like the PVA, gives it more character.
I found this VERY helpful.
Thank you
Right. Thanks for the brush cleaning montage. I'll go buy some adeshive glue.
I’m about to use gold leaf for the first time I’m quite nervous but thanks for the great video
you'll be fine, its much easier than you imagine :)
Excellent. But what would you use to seal this onto a craft project?
I doing a project with paper napkins, shells & gold leaf.
This was just what I was looking for, only have a little bit to do. Thanks
Thank you for doing this. Answered my questions
Thank you, particularly helpful right now knowing I have the option to use whats already in the house
I guess the only thing that would matter when looking for glue is to make sure to check whether its archival or acidic. If you are looking to making art prints then you'd want to use the archival non acidic glue
very good point, thanks for the info
Zenavesta that was my concern....do you know the answer?
Thanks so much for this, all the information I needed and good examples, thankyou 👍🙏❤️
briliant video thanks !! Will you provide a link for the glue pen please? xx
Thank you for this video lm looking into using hold leaf lve never used it as yet
THANK YOU for this video. I was having trouble getting my leafing to stay down, but no worries!💃🏾💃🏾
Can i use a mod podge glue ? And do i have to let it dry first ?
I love that you did this video! Thank you! 😊
You need to let the Mona Kisa set for the time it says. The paper has a lot to do with how these glues stick & the gold adheres.
Great video. I have been using the expensive sizing glue and have a big project. I will use white glue when I run out. NOW--what's an economical way to seal the leaf? I'm working on glass.
MaryBeth Strassel
I’ve known people who’ve used clear coat nail polish or hairspray, I usually use spray sealer for around $3.00/can. Just depends on what effect you want.
@@dianeessex300 thanks for the tips. I now think the sizing isn't all that expensive. A little goes a long way.
You need very soft brush when you lead it, because the rough brush makes it dull.
I watched a video where a lady used modge podge on a coloring book page ,it worked great,I am going to give that method a go,
T Amazon set I bought with size, it says to lay the leaves once it is tacky. When I wanted to put the leaf, it was completely dry. It does not say to wait for how long.
With adhesize size it will always remain tacky, you let it dry till it becomes clear in colour.
Thank you. You answered all my questions. Great presentation 👍🏼
WOW
Great tutorial
Thank you for sharing
helpful video, going to add some gold and silver leaf to my life drawing! thanks
using it in my next project too :) Good luck
Wow awesome upload dear..Many blessings
Nice to discover your channel. I'm looking to use some gold leaf in a drawing, so your video was very helpful.
I see the paper in the video was affected by the water in the glues. Have you tried using stone paper (manufactured from calcium carbonate bonded with high-density polyethylene)? It's unaffected by water.
sounds very cool, will need to try this at some point
Can i use fevicol glue
Informative video
Thank you so much.but i have a question.
Can i use glue stick on canvas??
Love this video. So informative and easy. I'm trying it today
Love the pen
thank you for this! Nice video!
Hi, why is my gold leaf turning brass after I varnish it?
Do you know if the PBA is the same or like Elmer's Glue? This vid has really helped. Thank you for posting this.
Elmers glue will work fine :)
Elmer's Glue IS P.V.A glue.....the only glue that is. I stock up in back to school specials or Dolleramas.. Has to be Elmers !! 👍...I water down a pit to thin out the tack time for gold leafing
Does the Mona Lisa glue dry to a flexible texture? I want to use it on tulle for a costume. Thanks!
You forgot to burnish it. Rub it into the glue, smooth and stick it down better. Light brushing is not usually enough.
Thanks, Limey. Great tutorial! Saved me some time and money.
Never been called a limey before but happy to help :)
@@ThisDesignedThat Sorry, my friend, meant no offense. Really did enjoy your video and was quite useful. I recently began investing into arts and crafts for both personal decor and (hopefully) supplement my income and I greatly appreciate folks like you who take the time and generously share their expertise.
:) no offense taken. Glad you enjoyed the content
The brush you use make a difference you need a very soft half Ball brush ....good vid for the new guys
Thanks for the tip
Great tutorial ❤ many thanks x
You’re welcome 😊
hi just finish watch your video. for car whats best glue to use? cannot easily remove by water
It would have been cool to draw a little design with the pen
Can I use any kind of gule like paper gule
Thank you for sharing! I am trying to recreate the cover of a manuscript/book with organic decorations/bas-relief, and it's difficult to know whether to use metallic acryllic paint, gold leaf, or another technique, in order to get a smooth surface? It seems gold leaf does have a texture to it, depending on the quality of the gold leaf, some cost £34 for one sheet, while others cost £8 for a large amount.
I like the demonstration, much better than the know it alls who just like the sound of their own voice.thank you 😉
I use the exact same adhesive size and it works brilliantly. Although just a warning- you added a bit too much of the size. Usually, i let the tip of my brush rest on the liquid and then paint over. The layer's so thin you can't see it but it greatly reduces any wrinkles, i personally feel. So its so smooth you can literally see your own reflection.
I'm a modeller and I use a modeller's tiny brush, which I find works better than a foam brush. However the size is always clumping the bristles together. Any thoughts? :)
Thanks for the great video. What adhesive would you suggest for applying gold leaf to metal ?
Hi there, I want to gold-leaf some metallic buttons I bought from amazon. I want to use them for clothing so there will be some rubbing every time they're slipped through the button holes. Is there a way to seal it in place to make sure it doesn't rub off?
Neat thanks Good option Tacky glue works too X
awesome video. nice details about it and How To Use Gold Leaf
How long till gold leaf adhesive stops being tacky even after dry?
Ever try spray adhesive? Rubber cement?
nope, rubber cement would not work, spray adhesize does remain tacky so that could work
You have to remove it with a very soft brush to avoid the breaking
Thank you! Nice instructive video.
how do i reduce the seam for every sheet? i want it to be more seamless bacuse im going to use it as my painting background its about 100x70 cm surface and im sure if im not applying it correctly there will be some seam between every sheet. thankyouu in advance!
Very informative. You did the testing for me thank you.
Glad it was helpful!
So you do not wait for the glue to dry
Thank you so much for this video! It was super helpful.
Thank you so much for capturing this one... Time saver, money saver....!! All appreciations for you..!!
Thanks for sharing, very useful. 👍
This video was super helpful for me! Thank u so much
Do you think Mod Podge would work?🤔
Thank you, I was afraid that I had to buy some expensive glue to try this out.. Now I'm sticking to my good old PVA glue 👍
Hi, what kind of metal leaf adhesive should I use for metal surfaces?
What’s best for using gold leaf/ imitation gold foil for jesmonite? And how would you use it?
I use gold leaf, and use the recommended size, it remains tacky for about 24 hours. And after applying the leaf, when dry for a couple of days, seal it with a good acrylic sealer, says on bottle, and remember , these are acid free, won’t tarnish, and won’t go black.
Thanks for the tip on sealing Maureen, very handy to know for future projects
Where Dudu get the Mona Liza size from please
Amazon or any local art shop should sell adhesive sizing for gold leaf