Uncle if you take the top nut off that mount you can remove it if you lift motor a little bit. Then you don’t have to mess around prying it and trying to take the bolt out from under it with the spanner. Greetings from the US🤙🏽
Hello Pinoy .Enjoyed your video . Great you have a helper at hand. I will be doing the same job in my lexus rx 300. All the best to you and your family .Cezary
As far as the oil seal being the wrong one. They probably gave you the wrong side. They’re different for the left and the right the driver side (left) is much larger than the passenger side (right)
I replaced both my lower control arms on my Highlander. Just buy new control arms. Replacing the bushings is way too complicated. Absolutely no one has that bushing removal kit that you use. Probably cost over $100 just for the kit. Very interesting process though and I enjoyed watching it
Auto part stores let you rent the bushing press for a deposit of the price of the tool. After you're done you return it and they give back your deposit. So essentially you can use one for free.
I got a bearing replacement kit from Harbor Freight at a very affordable price or yes you can rent for free from auto parts store. But yes I would also like to know where you purchased the bearing.
Uncle if you take the top nut off that mount you can remove it if you lift motor a little bit. Then you don’t have to mess around prying it and trying to take the bolt out from under it with the spanner.
Greetings from the US🤙🏽
Hello Pinoy .Enjoyed your video . Great you have a helper at hand. I will be doing the same job in my lexus rx 300.
All the best to you and your family .Cezary
Awesome job
Awesome video great instructions and easy to understand. you helped me today forever thank you❤💯👍 God bless from new Zealand 🙂 subscribed 👍
Pro tip for easier install of bushing leave in freezer for 30 mins.
As far as the oil seal being the wrong one. They probably gave you the wrong side. They’re different for the left and the right the driver side (left) is much larger than the passenger side (right)
I replaced both my lower control arms on my Highlander. Just buy new control arms. Replacing the bushings is way too complicated. Absolutely no one has that bushing removal kit that you use. Probably cost over $100 just for the kit. Very interesting process though and I enjoyed watching it
Auto part stores let you rent the bushing press for a deposit of the price of the tool. After you're done you return it and they give back your deposit. So essentially you can use one for free.
@@maurice2014 - never seen that particular kit. Don’t know where you get the individual bushings either.
I got a bearing replacement kit from Harbor Freight at a very affordable price or yes you can rent for free from auto parts store. But yes I would also like to know where you purchased the bearing.