Today I will be showing y'all how to weld a root pass on a 6" schedule 80 pipe using the Mig/GMAW process in the 6G position. Downhill Mig Welding is commonly used in Production Fabrication Shops.
Awesome video brother great arc shots plus I like how you jump right into welding and do the talking while welding instead of a 15 minute intro definitely gonna be watching your videos from now on
@@xs1mpyx387 yeah huston texas has plenty of refineries hiring and starting pay is 45-60 an hour with 150 per diem I went to a refinery for 1 year and left because i was having bearly any time to see my newborn kid
@@colbybarlow6247 ill probably do this for 2 more years then quit welding because I already bought a few propertys and that is already generating me enough income but who knows I might quit and start a welding business myself
Ask Hjalmar to do the 6" stainless first. If it not first then at least get him to give some info like gap, amps, tacks (how many, where, and what kind: bridge or hard tack) and most importint, how he puts in the root. Does he back feed it like he does on 2inc heavywall or some other way? There are plenty vids of 6010 root fill and cap on youtube but no 6" sche 10 stainles
Hey dude, if this is Hjalmar then want to thank you for all the great videos you uploaded so far. I'm sure it takes a lot of time and effort so just want you to know you are appreciated a lot and I'm sure I'm not the only viewer who feels that way. God bless you.
I’m going to be doing a 6g test pretty soon with a piece of 6” sch 10 pipe. My boss has told me that when he did his test it was uphill on both sides. The root and filler/cap both had to be done uphill. Can you guys please do a video on the this. Also I use an older miller machine that is not digital, it has a rotating crank that runs my heat up or down, and my wire speed is not digital either, it has a knob that adjust from 0 to 10 maybe. I usually weld around 25 volts I think and about half of my available wire speed. I like to weld downhill hot and heavy whenever I can as I feel it makes the flattest and smoothest welds when welding in a production setting where speed is kind of everything. A full uphill video using 035 wire would be amazing as I’m going to be out of my element for the 6g test.
Would really appreciate if you did a video on 6G tig root from 6 to 3 o’clock from going up from bottom to the upright of the pipe . That to me is really difficult and would like to see some different approaches , thank you
Another great video guys. I’d be cool if you could do a vid on stick welding flare bevels. Kinda like sticking flat bar to the side of square tubing. Thanks a lot guys.
@@weldtube nothing against you. Your a beast! Im a AWS certified 6G pipe welder..I love stick welding but I've been doing a lot of fluxcore lately due to the fact I build barges and railcars. I would like to see a video of stainless steel pipe welding with stick in the 6G position
I know you run a bit of a drag angle as you’re coming downhill, but on the bottom side it looked like you were running a bit of a push angle. Is that typical to change the angle like that for reinforcement purposes? Would that be typical for an RMD root as well?
How would the land and gap change if it was 100%co2 ? Have an upcoming plate test . The only thing I know ist that it will be 3/4 plate 100 %co2 and the filler brand esab aoutrod 12.50 ( AWS 70s6 wire ) . Also a 6g position 6 " pipe with the same requirements ( gas and wire ) .
About to start training and testing at work with this exact procedure however our gas is 90/10. Any suggestions, known issues or set up tips with that?
Think you can do this plus a Flux cap ? , most companys out here are Mig root and flux cap bro ! , love your videos , wish i went to south coast instead of tulsa lol...
Hey man I’m a big fan of your Chanel I have a 2in 6g schedule 80 test coming up soon I been practicing but I can’t seem to get my looking uniform is there any tips you can give me? Thanks in advance
👇WeldTube Store👇
www.weldlife.com
Awesome video brother great arc shots plus I like how you jump right into welding and do the talking while welding instead of a 15 minute intro definitely gonna be watching your videos from now on
This what made me get a 45 dollar an hour job thx so much
Any hiring by chance?
@@xs1mpyx387 yeah huston texas has plenty of refineries hiring and starting pay is 45-60 an hour with 150 per diem I went to a refinery for 1 year and left because i was having bearly any time to see my newborn kid
I'm in the same boat watching this for a job paying $45/hour in georgia.
@@colbybarlow6247 I know its been 2 years but now I make double I am getting payed 65hr working at a oil rig with 170 per diem
@@colbybarlow6247 ill probably do this for 2 more years then quit welding because I already bought a few propertys and that is already generating me enough income but who knows I might quit and start a welding business myself
Doing my final exam this morning, then I’m done my pipe welding course. Just wanted to make sure I was ok. 😊 thanks
I have learned more with your videos than school...keep up the good work!!!🇵🇷
Can you make a video of the same thing except instead of downhill go uphill instead. I've found going uphill is a tad more difficult at least for me.
Love your videos. you give all the ins and outs in a very well spoken way. Keep it up brother
Great job. Glorious root pass!
Great job with videos. 6010 - root, fill, cap all the way out.
Ask Hjalmar to do the 6" stainless first. If it not first then at least get him to give some info like gap, amps, tacks (how many, where, and what kind: bridge or hard tack) and most importint, how he puts in the root. Does he back feed it like he does on 2inc heavywall or some other way? There are plenty vids of 6010 root fill and cap on youtube but no 6" sche 10 stainles
Hey dude, if this is Hjalmar then want to thank you for all the great videos you uploaded so far. I'm sure it takes a lot of time and effort so just want you to know you are appreciated a lot and I'm sure I'm not the only viewer who feels that way. God bless you.
I’m going to be doing a 6g test pretty soon with a piece of 6” sch 10 pipe. My boss has told me that when he did his test it was uphill on both sides. The root and filler/cap both had to be done uphill. Can you guys please do a video on the this. Also I use an older miller machine that is not digital, it has a rotating crank that runs my heat up or down, and my wire speed is not digital either, it has a knob that adjust from 0 to 10 maybe. I usually weld around 25 volts I think and about half of my available wire speed. I like to weld downhill hot and heavy whenever I can as I feel it makes the flattest and smoothest welds when welding in a production setting where speed is kind of everything. A full uphill video using 035 wire would be amazing as I’m going to be out of my element for the 6g test.
I have to do my test that way
Great job keep posting more videos I am learning with you videos thank you
Very helpful. I have one coming up for PCL soon.
Big salute great welding legend 🤟🤟🤟🎸🎸🎸🚀🚀💎
Great video brother! Now I want to learn MIG
Goodluck always idol. God bless.
Good job friend... 💪👍🔥🔥
I apprieceiate ur tips its very helpful
Bravo sei un vero professionista uno dei migliori che ho visto, saldatore completo, che filo usi?è da 1 mm di diametro?
A couple of jobs on that 6" sch.10 SS on 6G position, would be nice on some tips from a slick hand 🤘👨🏭
Root pass nice
Would really appreciate if you did a video on 6G tig root from 6 to 3 o’clock from going up from bottom to the upright of the pipe . That to me is really difficult and would like to see some different approaches , thank you
Another great video guys. I’d be cool if you could do a vid on stick welding flare bevels. Kinda like sticking flat bar to the side of square tubing. Thanks a lot guys.
Michael Perry common on boiler overlays
@@weldtube nothing against you. Your a beast! Im a AWS certified 6G pipe welder..I love stick welding but I've been doing a lot of fluxcore lately due to the fact I build barges and railcars. I would like to see a video of stainless steel pipe welding with stick in the 6G position
Thanks for this video it really helped a lot
Thank you.
Your video is really good. I would like to see the b pressure test that is 5G position with 6010 root and fill, cap with 7018.
That was impressive man props. You made that look verry easy and it is not.
Superb
I lovvvve walking the cup on my root
So nice bro
My boyfriend and I watch your videos all the time. Where do you get your helmets from? They are super cool 😊
Great video okay. I thought the root looked good okay. Very helpful okay.
Great video bro, after roots all in do you think it's best to grind the whole root or just buff with wire wheel?
6g with a flux fill and cap
Can you show from start to finish a 6G 2 inch pipe weld test using .035 for the root pass and .045 for the filled and cap weld please and thank you
Nice video
I know you run a bit of a drag angle as you’re coming downhill, but on the bottom side it looked like you were running a bit of a push angle. Is that typical to change the angle like that for reinforcement purposes? Would that be typical for an RMD root as well?
Сварщик профессионал
How would the land and gap change if it was 100%co2 ? Have an upcoming plate test . The only thing I know ist that it will be 3/4 plate 100 %co2 and the filler brand esab aoutrod 12.50 ( AWS 70s6 wire ) . Also a 6g position 6 " pipe with the same requirements ( gas and wire ) .
S
U
P O L A N D
E
R
About to start training and testing at work with this exact procedure however our gas is 90/10. Any suggestions, known issues or set up tips with that?
Would love to see a video on fish eyes in stainless Tig welding
Good
Think you can do this plus a Flux cap ? , most companys out here are Mig root and flux cap bro ! , love your videos , wish i went to south coast instead of tulsa lol...
I want to see 6G downhill pipe welding with 7010 hyp and 8010-g fill and cap
WeldTube I'm doing to the local 798 pipeline union test
I would love to see that also! That's one procedure I've never done. Loving the channel so far btw!
How did the test go youngster
good
Could you demonstrate a mig root uphill with 0.35 wire on pipe with filler and cap with fluxcore uphill 045 wire
Down hill root makes it weak right? Why not uphill progression?
Can you do the hot pass uphill with mig on pulse process please thank you
cuanto utilisaste de voltage y velosidad del alambre y cuanto de flujo de gas bro
Hey man I’m a big fan of your Chanel I have a 2in 6g schedule 80 test coming up soon I been practicing but I can’t seem to get my looking uniform is there any tips you can give me? Thanks in advance
Root”
Can you do an example 2 inch schedule 80 6G... stainless
It's possible one video stt system? Thank you.
Bro, do 6GR with fcaw please¡
heavyy wall pipe 6g stick welding and tips to pass UT
What is use parameters and which power source is used
عمل جيد بالتوفيق
VARYNICE
Is the spatter inside the pipe ok?
6g hard wire downhill pipe test. 2" sch 60 open root
Do you have to grind the run on mig ?
6G mig root , flux fill and cap
I would like to see how you do your root with 6010
Thanks im trying to get pipeline ready just been struggling with my root i dont know if is my gap or landing but ull stay tuned thanks
Thanks for looking out
@@weldtube thatd be spooky. 1/8 land with a fat 3/32 gap it will weld itself.
What is the size of the gap?
STT?
A 6g mig and stick combo 7018
Please do a 2" xxx
Eso era STT o RMD?
What the best way to weld with a 6010 rod
Bring back hjalmar
It's the 2" flux cap that gives me problems.
Why show down hill when Most test are uphill? I've never taken a downhill non pipeline test.
Nex video 6g Flux core pleace
What’s the wired speed and voltage ?
He said 17.5 V 185WFS
Why your stick out so far tho
Didn't know Americans stove their pipe, welding downwards makes a concaved weak fuzed weld
Can we see some inconel
this is stoving and not aloud, here in the uk anyways..
Can you root pass with FCAW-S? If not, why is the reason?
Sir fcaw caping aplode video
6G flux core
I want to earn while I'm learning 🙂😂🤣
Downhill not uphill
flux-core cap
Jody from welding tips and tricks.com has way better arc shots
Why not make open root down to up
U r not good welder
Where is the 6g position.?
Look at 1:00 on the video. It's set up for 6g testing position