Glad your planning another Filing Video Buckin. It saves me years of struggling. I study the ones you've already made over,and over. There is always something I missed the first time.Cant wait to see the new Saw at work.
Wow love the new shirt it will be a big hit big shoot out to Scotty Wilson your a great guy to send Buckin another saw your kindness is amazing !! Sounds like a beast of a saw love that stihl bar as well looking forward of what’s to come keep up the knowledge kindness is the oil that takes the friction out of LIFE! Be safe
When I seen that on one of his videos before he mentioned it, I said wow love the tailgate. Didn’t Know he was gonna have more videos with that good looking sexy tailgate. Hopefully I can say that.
The 372 stock and any worn out, well used 365's that I've had in my hands over these years, they look in lots of ways as though they're the same (to pick up the 372 stock equipment is noticeably a bit heavier in the hand). It's those odd things, and those very minor details. The 365's are efficient to work with I've found, when you have a decent piece of timber down, that might still be packing a punch, such that it could roll towards you in those clean up and processing stages. Which is exactly why at those stages that you want the 365 in your hands, in spite of any of it's limitations. Because it's fuel consumption is okay, and you can get away with a 24 inch bar on those stock 365's (I needed sharp chain lately and loaded one up with 20 inch stuff, to finish a job). Those 20 inch deals are a lot less safe than 24. And that's why I still think a 365 makes sense, you can ryn your 24 inch stuff on it (not like the 372, but you can still run it).
The folks who do service overseas and end up using tools and equipment, that they've never laid hands on prior. You tuck the piece that you've been provided with, your everyday carry in your waist and you go to work. They all say it, not to get too used or dependent on customised triggers, attachments, sights and grips or magazines. As chances are the service piece that you're supplied with won't have any of that. The 365 in power head terms is really that service weapon. There are just so many of them out there in the world, that at some stage you're going to have to get the work done with a saw like that. So one has to know it. The 50 cc tools some are becoming like that, except my suspicion is, is that some 550's out there might be asked to do what a 365 or 362 was meant to do in the first place. And okay, these 50cc tools are real nice, they're not what I'd describe as a full size service weapon though (a little bit more like the 'compact' types of equipment that are available to security personnel, but in reality cause all kinds of problems with aim, recoil, hand grip, magazine capacity). You can go right down the line.
that saw sounds very good. porting its a art.everybody can do it but few people can do it realy good and having their own moves how to do it,or how to say it.
I can’t wait to see what the skilled Master can to with the 365 Special. Scott all the saws you have been sending in for Buckin to use on the channel are Master Pieces keep up the great wood.
A shirt with a vintage print Husky power saw and a caption that says “The BBR Experience”. The first video I saw where the “BBR” caption appeared, I thought it was referring to the sound of the saw! BBBRRRRRR!! 😂
I don't recall you talking about when to throw your file away. This was the problem with the last person I helped with sharpening. Worn out files, don't sharpen. Skating around, the depth will be wrong, the angle will suffer. Please spread this word.
Sweet boots!! I'm gonna be in the store again soon ta get some black false tongues haha, ordered some JK boots in black roughout, think they will look sweet on them!!! And wowzas, that freakin saw sound SNAPPY!!! I need ta find friends like you have buckin hahahaha❤❤ much love from the Barths 🪓🪵🌳
Yes on a filing video please 😀 Also, in the market for a new, bigger saw. I'd like a 395. Any recommendations on where/who to get one and would you have it hopped up from go or wait till its got some hrs on it. Thanks from Central Washington, down south haha
Man I like your videos. I have a 572xp xp myself. I realy want you to make a video on how to grease the bearings of our saws. Someone is saying on a video that you should grease the saw bearings every 50 working hours approximately. Is it true? The same guy says that there is a different procedure you have to follow on 572xp and 562xp is it true? Can you show us the correct way?
@@naturundhund G'day Peter. I though I would just say that my mother is German, she moved to Australia in the early 60's, and my Father is Dutch. My surname is Vandenberg. I'm truly hoping for the best for Germanys future. All the best mate.
Yes do another sharpening video, why switch from 7/32 to 3/16, isn’t the sister -c- made by using a smaller file? Thanks been in the sun to long today 🤣
We all have a God-shaped void, that we try to fill with counterfeits that only Jesus Christ can fill.. he wants a relationship and fellowship with us. He loves us and wants to spend eternity in heaven with us. We need to be sorry to God for what the Bible says is sin. Only once we realize we're lost can we be saved by trusting and the life, death, burial and resurrection of Jesus Christ. He shed his blood for us taking our sins upon him, and he gives us his righteousness when we put our trust in his finished work on the cross, asking him to forgive us and save our souls from hell.
If you died tonight, are you 100% sure you would go to heaven? God wants us to know for sure and his word tells us how we can know. Eternal life with God is a free gift. Jesus Christ paid it all for you. He took your punishment so you can go free. The gospel. Jesus Christ died for your sins, according to the scriptures, and that he was buried and rose again the third day according to the scriptures. Acknowledge your a sinner, ask Jesus Christ to forgive you, put your trust in his finished work on the cross / his shed blood that can cleanse your sin.. and ask him to forgive you and save you. For whosoever shall call upon the name of the Lord shall be saved.
Dude, look at the LENS of the camera, NOT at yourself in the viewfinder! It makes you look like you're looking "over there". Look at the LENS of the camera.
Hey, this is off topic. However, I use to watch your videos on hafting axes. It got me started into that rabbit whole 4 or 5 years ago. However, I have a Plumb Blue Streak axe head. I have not seen many in person. I’m trying to find out how much it is worth. I tried reaching out to Tom at yesteryeartools to get some knowledge on it. Curious of
That tailgate bench is sweet Buckin! Fantastic idea.
Now I want one on my patio cooking shed. Better than the plastic folding table I have out there now.
It’s Just the Right Height Too! 👍😀
i want that everywhere haha
Glad your planning another Filing Video Buckin. It saves me years of struggling. I study the ones you've already made over,and over. There is always something I missed the first time.Cant wait to see the new Saw at work.
I have learned so much from the filing videos. Very grateful as information was not found anyplace else, especially use of raker gauges.
Interesting
Love that taligate bench!!
❤Thank you Scott for the saw you gave Buckin . Love the new teeshirt Buckin
Good ol filing videos are always a favorite ! ✊
Glad you like them!
Morning 🌄 Buckin nice tailgate 👍
Nice chainsaw Johno Darwin NT 👍
Wow love the new shirt it will be a big hit big shoot out to Scotty Wilson your a great guy to send Buckin another saw your kindness is amazing !! Sounds like a beast of a saw love that stihl bar as well looking forward of what’s to come keep up the knowledge kindness is the oil that takes the friction out of LIFE! Be safe
Yes Sir, more saw sharpening please!
Done
Was just watching some of your old filing videos yesterday! Stay safe out there everyone!!
Yes, would like to see another filing video. Love you buckin
Found your channel 4 years ago, from there I found Ironhorse, Steve, TinMan…… learned a heck of a lot from you fellas. Keep it up!
Was just in your neck of the woods, Buckin’. Beautiful country up there.
Man those 365 specials are beaut bit of kit as well as the merchandise and suspenders,, love ya work buckin 😎
The tailgate work bench , is as good as that saw💯
Another great build by Scott Wilson. I love it. Nie work Scott and thank you Buckin for sharing with us. Love ya brother. 🌲❤️🌲👊🪓
That saw sounds Buckin sweet!
When I seen that on one of his videos before he mentioned it, I said wow love the tailgate. Didn’t Know he was gonna have more videos with that good looking sexy tailgate. Hopefully I can say that.
Good man Scott excellent watch ❤
The 372 stock and any worn out, well used 365's that I've had in my hands over these years, they look in lots of ways as though they're the same (to pick up the 372 stock equipment is noticeably a bit heavier in the hand). It's those odd things, and those very minor details. The 365's are efficient to work with I've found, when you have a decent piece of timber down, that might still be packing a punch, such that it could roll towards you in those clean up and processing stages. Which is exactly why at those stages that you want the 365 in your hands, in spite of any of it's limitations. Because it's fuel consumption is okay, and you can get away with a 24 inch bar on those stock 365's (I needed sharp chain lately and loaded one up with 20 inch stuff, to finish a job). Those 20 inch deals are a lot less safe than 24. And that's why I still think a 365 makes sense, you can ryn your 24 inch stuff on it (not like the 372, but you can still run it).
The folks who do service overseas and end up using tools and equipment, that they've never laid hands on prior. You tuck the piece that you've been provided with, your everyday carry in your waist and you go to work. They all say it, not to get too used or dependent on customised triggers, attachments, sights and grips or magazines. As chances are the service piece that you're supplied with won't have any of that. The 365 in power head terms is really that service weapon. There are just so many of them out there in the world, that at some stage you're going to have to get the work done with a saw like that. So one has to know it. The 50 cc tools some are becoming like that, except my suspicion is, is that some 550's out there might be asked to do what a 365 or 362 was meant to do in the first place. And okay, these 50cc tools are real nice, they're not what I'd describe as a full size service weapon though (a little bit more like the 'compact' types of equipment that are available to security personnel, but in reality cause all kinds of problems with aim, recoil, hand grip, magazine capacity). You can go right down the line.
Great way to end my day and start my weekend with a BBR video! 👍🏻🇨🇦
Enjoy!
Scott,Send me One to -To Norway😊🇳🇴
Thanks for the video.
Love the content 👌. Thank you, buckin, for being you.
Love you guys.
Hi friend
Valya, it's good to see you 😊❤
I think you and the Ranch Fairy need to do a collab on sharpening. You’re welcome.
that saw sounds very good. porting its a art.everybody can do it but few people can do it realy good and having their own moves how to do it,or how to say it.
I can’t wait to see what the skilled Master can to with the 365 Special. Scott all the saws you have been sending in for Buckin to use on the channel are Master Pieces keep up the great wood.
Good and great saw!!💪💪💪
Great video! Love the content
love the tailgate , i might even do that
Thanks for the saw Scotty and a filing video would be nice
That thing sounds SAWEEEEET!!!!!
Your amazing brother Love
Saw sounds amazing
Hey buckin. Army!
Have a great day everybody!
Oh yeah, we’ll be here for the files
Sounds like a beast, this will be an awesome saw
If someone gives me a loner saw, I start it up, let it run while I have an eggnog.
Yeah, I know.
Mid 80s in BC??? I would looooooove that in GA USA during July!!!!
He's so cool ❤
Wow 😮 different animal
Can't wait to see this saw go to work!!
I love the filing vids
More pls
Wow
Shaklank
Awesome
Yeah
Hey Billy Tom and I were in the hospitol together apartntley his son and you worked on a black wallnut together a few years back good too see you bro
Amazing new saw and the muffler is awesome 🥳🥰 does the person that makes the mufflers do videos on UA-cam on how they make them? Or is it classified?
I will continue to get the gullet!!!
Cuz i thing cut little bit less but little bit longer....
Top plate angle....
Your teaching
Hihihihi
Nice another bad ass saw to debut
Nice 101° in Willamina Oregon right now.
What a goofball!
Hey Buckin! Do you think y’all could make a shirt that says “Nice gullets!”? I think that could be a best seller. 😉
"Look at the gullets on that." ? ( ! - )
@@MartinParsons-tr6wi “I ❤️ deep gullets”
A shirt with a vintage print Husky power saw and a caption that says “The BBR Experience”. The first video I saw where the “BBR” caption appeared, I thought it was referring to the sound of the saw! BBBRRRRRR!! 😂
SHAKLANK✊ nice Shirt!
that's my saw!
I don't recall you talking about when to throw your file away. This was the problem with the last person I helped with sharpening. Worn out files, don't sharpen. Skating around, the depth will be wrong, the angle will suffer. Please spread this word.
AHWOOOO 👍
be kind!
Awesome video !!!! I had a question for you Buckin about how long will a file last with consistent use until you have to get a new one ?
Sweet boots!! I'm gonna be in the store again soon ta get some black false tongues haha, ordered some JK boots in black roughout, think they will look sweet on them!!! And wowzas, that freakin saw sound SNAPPY!!! I need ta find friends like you have buckin hahahaha❤❤ much love from the Barths 🪓🪵🌳
And I almost forgot.....sweet SHAKLANK SHIRT!!!!
❤
Buckin, you can do a video on painting happy trees I’m watching.
🎨 🙂 🌲
Me too 😄🌲🌳❤️
What did we get. I'm so excited to find out....
what instrument is in your intro besides the drums? I love that sound!
Shaklank 🤛
Thank you buckin
You bet
Yes on a filing video please 😀 Also, in the market for a new, bigger saw. I'd like a 395. Any recommendations on where/who to get one and would you have it hopped up from go or wait till its got some hrs on it. Thanks from Central Washington, down south haha
95 is a great saw
Filing videos should be a Yearly thing! (At Least🤔)
Did ya find the elk shed in the bush buckin, wicked saw Scott
Gift
gday buckin
Yes it is
Hey is it possible to get a good deep video on bar maintenance and chain maintenance
Man I like your videos. I have a 572xp xp myself. I realy want you to make a video on how to grease the bearings of our saws. Someone is saying on a video that you should grease the saw bearings every 50 working hours approximately. Is it true? The same guy says that there is a different procedure you have to follow on 572xp and 562xp is it true? Can you show us the correct way?
How come sometimes when I'm filing, my file jumps up and down on the push stroke.
I wanna see it in the cut
3/16TH SO many used !
G'day everyone, have a great day.
Greetings from Germany Peter...
😊
@@naturundhund
G'day Peter.
I though I would just say that my mother is German, she moved to Australia in the early 60's, and my Father is Dutch.
My surname is Vandenberg.
I'm truly hoping for the best for Germanys future.
All the best mate.
@@steely1neverwane Thank you my friend...I hope so too.
Greetings to Australia.
Friends
What’s the name of the bar oil you use?
That's "Bar and Chain Pro 100" by the company named DGP.
It’s DGP
Does Ryan know Mick Taylor? 🔪
Yes do another sharpening video, why switch from 7/32 to 3/16, isn’t the sister -c- made by using a smaller file? Thanks been in the sun to long today 🤣
Will do,, yes it is
8:35 - 8:59
Thanks got confused 😁
What ever happened to old Harvey the last video his health isnt doing to well.
We all have a God-shaped void, that we try to fill with counterfeits that only Jesus Christ can fill.. he wants a relationship and fellowship with us. He loves us and wants to spend eternity in heaven with us. We need to be sorry to God for what the Bible says is sin. Only once we realize we're lost can we be saved by trusting and the life, death, burial and resurrection of Jesus Christ. He shed his blood for us taking our sins upon him, and he gives us his righteousness when we put our trust in his finished work on the cross, asking him to forgive us and save our souls from hell.
If you died tonight, are you 100% sure you would go to heaven? God wants us to know for sure and his word tells us how we can know. Eternal life with God is a free gift. Jesus Christ paid it all for you. He took your punishment so you can go free. The gospel. Jesus Christ died for your sins, according to the scriptures, and that he was buried and rose again the third day according to the scriptures. Acknowledge your a sinner, ask Jesus Christ to forgive you, put your trust in his finished work on the cross / his shed blood that can cleanse your sin.. and ask him to forgive you and save you. For whosoever shall call upon the name of the Lord shall be saved.
Dude, look at the LENS of the camera, NOT at yourself in the viewfinder!
It makes you look like you're looking "over there". Look at the LENS of the camera.
when you have a bell that tell you you make money you keep a eye on it. 🤣
Hey, this is off topic. However, I use to watch your videos on hafting axes. It got me started into that rabbit whole 4 or 5 years ago. However, I have a Plumb Blue Streak axe head. I have not seen many in person. I’m trying to find out how much it is worth. I tried reaching out to Tom at yesteryeartools to get some knowledge on it. Curious of