I work for Husqvarna group in Huskvarna and I diecast alot of the parts for these saws. Amazing feeling to see a saw in your hands smiling away! This made my day Billy! Greetings from Sweden
Brother when I went to the factory in Sweden it solidified why i felt i had something superior in my hands all these years ,,please say hi to the folks on the line for me , sincerely, brother thx
i have a tiny 460 and I love it, just for around my 40 acre farm with 24 acres of wood on it, The saw is perfect I use an 18 inch bar and couldn't be more pleased with it. Starts second pull cold always.
You're a great brand ambassador for Husqvarna, Buckin'. Always fair minded, always honest. What you have to say in favour or occasionally in criticism of Husky's saws is weighty, considered and offered to help everyone do better. No better man, no more deserving. Thanks for being who you are buddy.
I have that saw. It RIPS. Favorite saw I own . There is a bearing on the crank. Clutch side. There is a hole in the center. Slam your bar grease tool in that hole 4-5 pumps.. made a WORLD of difference. Crazy smooth after that lol
Everyone barks on about the weight of husky but it's balance and feels nice in the hand, gone from 372 to 560 to 562 to 572xp and all the while I'll had the 390xp and ill never change good work buckin
Bought my 1st Husqvarna saw back in 1997, still run it. I had to rebuild the carb once, other than that just normal maintenance has kept it running. I do have 2 newer saws but they’re Husqvarna’s too. I’ve run other saws but they just don’t seem to stand up to my fleet of Husky’s. Oh yeah…… at 69 years old my saws still get used at least 2 days a week. I might be old, but I ain’t dead yet!
Im using 562 markII for two months. 5 days a week, 7-8 hour a day. Great saw so far, excellent balance and amortization. Mark II has more space between muffler and crankcase, more radiators on cylinder and bigger air intake on a starter side.
That was a really fun unboxing. I knew you would find a way to start it and find something to cut. Too hard to resist. I love my 254xp 30 year old saw. Has run like a champ.
Husqvarna USA. That was a board room discussion from the corporation it's self, to send you that package. I would say it took several marketing managers across the US a lot of time, emails back and forth, watching your UA-cam channel, just to get the feel of the reason why they would all agree to send a person that is not a Husqvarna dealer, a saw, bar, chain, and shirts. Dang write man, I would be honored as well. You have arrived, and a great retirement awaits. Good job Buckin!
hay buckin' a shout out for are love of God given management of are forest's,heat,building and the works ect ....after 15 years owning a delmar 5100s bucking dozens of semi loads of hard wood each year for heat and the free stuff .when the saw was new I logged for a saw mill a year and 1/2 never been to the shop runs great so,,,,love to see dalmar vr's husq thats all thanks Frank,,,
I have the older 562xp running a 24" every day. Updated the air intake a while back. The largest bar" recommend" by Husky is a 28". Found it just could not keep the speed up in the hard wood under it own weight. If you want it scream all day 20" is the best. I didn't have many trees over 24" so falling and cleanup can be done with one saw. One thing like and hate is the run time vs the 70cc class. Limbing and bucking in the heat it just keeps running and I run out of gas first. 70cc saw( MS462) goes dry in 15-20min, way to short. That X cut chain profile is impossible to maintain with a round file only. Husky needs a file to match that profile. Overall the 562XP has been a great saw for me. last year I got the 550XP mark2 as a climbing saw with 20" bar.
I run a gen one 562 and LOVE it. Just recently it developed a idle issue. It will now get sent off the boys at rip saw for them to repair and sprinkle their magic pixie on it. That 562 is a true sleeper. The saw on a 26” with that chain is the combo of the century.
That profile is exactly how i grind my chain for myself and others every cutter has given me very good feed back i also bring the guides down a little more than recommended depending on saw size and wood species hardwood or softwood etc!!
You captured the energy and excitement of a kid the night before Christmas 🎄that’s why your videos are so addictive, that and the sound of a well working power saw centres me, brings me back to good memories of me with my old man out in the woods. ❤2U and all that you do.
Im glad they kept their fisher-price bubble. that skweek skweek brings out the inner child in me too. Keep the HUSQVARNA box for a carrying case. LOL happy cutting. Stay safe
I own a mark 1 562. Love it and have the wrap, dogs, and recently piped it myself. Love it even more. It's not the most powerful saw, does what I need it to.
@@BuckinBillyRaySmith I took my factory exhaust apart and opened it all up. Welded a bigger square output. I owe my inspiration to modify my saw to you and your passion for saws. Thank you
I just bought a used 592xp with full wrap and 32” bar and I LOVE IT. Added a Husky 24” lightweight bar (I think it is actually a rebranded Sugihara bar) which is great makes it so light and easy to use for small quick jobs.
i have like ten saws lol im set for life. i have a 7310p , ms500i , ms462 , cs590, cs390, two ms170, ms250, 545 mark ll, 3 hortzformma (76cc, 90cc and 120cc)
Very happy for you. Like giving to a grandchild on Christmas day. I file that chain topcutter with a square file at 90-Degree horizontal to the bar good in all wood hard and soft or dirty. Lasts a long time when filed.
Wow, congrats! Wild timing, I pulled out my 560xp after running my 500i and 572xp today.. and it ripped! Amazing they sent it with a 28" bar too. Health to enjoy brother.
That’s a huge deal man. Congrats on receiving that saw from husky. Even tho you are such a well accomplished man in the industry this is like the final stamp of approval. You will honestly be remembered forever by myself and many thousand of others. I’m 35 and will hopefully still remember everything that I have learned from you when I’m an old man. I have never watched any other channel for power saw info because I could tell from day 1 that you are the real expert.
My first chainsaw was a Jonsered, and that is what I mainly own. I was really upset when they Axed Jonsered. It is good to see Husqvarna to something so kind as this. Makes me kind of feel like giving them a chance. I know they were all the same on the inside, but I felt really bad for my friends shop that sold Jonsered. They are mainly selling echo saws now, and I never liked echo's except for the 2511t (but even they have weak trigger handles, and the wire lanyard is weak also). I love my Red saws, but I agree that Jonsered/Husky saws are built tough. I remember when one of the guys on the logging crew I used to work for, accidentally drove over a 2171 Jonsered with the skidder. We robbed a bunch of the plastic off a dead saw, and had it back in the wood a few days later. A few years later a friend that is a die hard stihl guy, had that happen to his saw, and there wasn't much of anything left to salvage.
Taz, you are 100% correct! This man has always been extremely clear about how he feels about Husqvarna. He is indeed the reason I went the Husqvarna route myself.
Just bought one last week, running it in hardwood in upstate NY 20” bar . Love it 👍🏻 it’s not my 372xp but a close 2 nd it’s lighter faster and very nimble in your hands .Looking forward to your review. Remember Get the gullet !
I have always been a sthil fan boy , small compact torque in spades , but my dad left me an old husky 42 and it is Just so easy to work on logical functional JUST NICE ENGINEERING ! I could be converted
I’m currently updating my herd. Recently sold off my beloved 661. My 460 is starting to show her age. So I bought a 500i to replace those 2. Mind blown so far. Now my johnsred 2065 is aging as well so now after the 500i purchase and the older I get the less I like to have to figit with things so now I’m thinking about a newer 60ish cc saw.
Sweet! Happy Husqvarna is grasping your channel and the whole community. That being said as a proud “East Coaster” I run a full wrap handle. You made me a believer in its handling advantages. Great content and want to see how you show its worth.
I think you will love those x cut chains the 83 and 85 both are great chains ⛓️ they cut better than any chain out the box that i have ever used and i have tried a lot of different brands
Don’t take pain meds. Pain is our guide to healing and letting us know what we can and cannot do in the healing process. I had an L4/L5 discectomy early in my career and was climbing in two weeks with out pain control but the pain guided me.:) I know you probably know this friend:)
"My Flys been down the entire time" Best unboxing video Eva. I purchased this saw just before Christmas. Have yet to start it, but cannot wait to get it into the wood. Love love love Husqvarna!!
I got a 562xp from a client whose husband passed. I showed up with a small ryobi to do a basic job. She gave me the husky to try but I didnt know how to start it at the time. End of job she gave it to me. Got it up and running and 1.5 years later,. I use it on all my jobs. I hated the brake release/cap issue though lol
Congratulations Billy! That's awesome Husqvarna acknowledged your hard work, dedication, commitment to the logging industry. Well deserved enjoy friend
I love my Husky, my dad bought some cheap Poulans as back up and truck saws, didn't realize they were made by Husky as well. For a loose, cheap saw those run like a scalded cat.
I gotta be real with ya, I'm feeling a little envious. I need a new saw so bad. Been looking for a new one but just can't do it until I get back to work and get some money coming in. So awesome what Husqvarna did and sent to you. That's awesome brother.
You are not alone brother. And likely, there are many others also that feel your pain. But life will do this sometimes and seems not to care.... it passes over that man in need, to bless yet again, the man that needeth not. Something like that...
Oh man how cool! I’m learning and will be looking for my next saw. Currently have 45cc with 18” bar. Want something a little bigger maybe 70cc range, but that looks like an amazing saw too!!
Just bought one of these myself last week as my FIRST chainsaw. Got one with the lightweight 24" bar and the C85 chain. I LOVED WORKING WITH IT IMMEDIATELY...but I don't have any real experience so what do I know? Not much I can say that! Anyhow, its really good to know that an expert on the subject also finds the saw so satisfying to work with. Can't wait to see you run it with a full wrap and a muffler mod.
Just got into saws and pre ordered this one with the 28" for my first pro saw for a Christmas present for myself. Been watching and learning from you since I bought a 445 of a buddy. Glad to see you getting recognized by Husqvarna! Mine came with the double dogs separate in the box. Just need the full wrap handle now.
I’m a stihl guy but right now stihl honestly doesn’t have a model I’d be willing to shell money out for. Been really looking at these 5 series saws for the last few months. Maybe not the lightest saws but they look like winners. Love your content and your faith. Please don’t ever change
ALRIIIIGHHTT!!!!! YES!!! Buckin this is SO COOL! I know I know you always say "friends, just one pound difference, just one, and you get all the extra power of a 70 cc saw.... just get a 572" I know I know but I just LOVE the 562! I am SO excited to see this in your hands again. You had 2 other videos with it, I guess it was someone else's where you ran a square grind,.325 32 inch bar and it did great! I can't wait for more 562 content there's just something about that saw that gets me happy. THANKS HUSQVARNA!! Buckin you are their greatest salesman whether you or they know it... I am SO EXCITED!!!
Congrats on the new saw, Buckin. Man that's a cool freakin saw!! My dad always ran huskys and by default so have I. Can't get a better saw!! Also my 1994 Husky 61 runs a 32" bar like a boss. It'll absolutely run a 28!!
Its about fricken time Husqvarna! Wooooohooooo Buckin 🤩 ya look like a believing youngster on Christmas morning 🙌 glad to see you being supported bt the industry 😁 stoked for you Billy and big thanks to Husqvarna for giving you big love! 🫶 Aloha brother
Of all my Husqvarna saws, the 562 xp (2018) is my favorite. Came with a standard 28" and I add wrap bars and switch to the then new Husqvarna lightweight bar. Has no problem with all the oak around here. Have cut up to 36" without a problem. I run the oiler wide open. Looking forward to how you like the Mark II, been thinking of getting one.
Nice saw. A few guys have figured out how to duplicate the c83/c85 chain profile. You sharpen the top plate with a stihl hexa file then hit the gullet with a 5/32 file. Similar to the baby C you showed us but with a square/hexa file. It's not an east coast saw until you stick a 16 inch bar on it lol.
Love my 562 mark2. It’s a mid sized workhorse and nice to carry into thick brushy areas vs a heavier saw. Once you open it up a bit with a light port and a pipe it is hard to NOT want to grab that saw first
Hi Buckin, I have been waiting for my dealer to get one of the 562xp Mark II in. I'll be watching for your review of this saw. I do have experience with the X-cut chain and I am very impressed with how it cuts. I have profiled a wheel for my grinder to replicate the grind Husqvarna has put on this chain. If Husqvarna is watching, offer us a CBN wheel with an X-cut profiled wheel for the Oregon grinders. Then the dealers that offer sharpening and the end user with a grinder could continue sharpening the chain with the original out of the box grind with ease.
Hey Buckin Billy. I have been watching your UA-cam channel for a while. Love the channel. Keep them videos coming. I myself am starting my own business in woodcutting and tree services. Just wonder if you had any words that might help me out. If not I understand. You are a busy man lol. Pray for me and my family. God has got us. I know he can do all. Just thought you might have some words. Thank you for the time and the great videos. P.S. love those old and new Ford trucks. God bless 🙏✝️
Very nice of them to do that! I like the C85 chain… cuts really well straight out of the box… I’m interested to see how you resharpen it as using a round file will change the shape of the grind… 👍🏻
That's awesome Buckin Billy! You should be a Husqvarna representative or engineer for them atleast! You definitely know all about them. That's the saw I've been thinking about purchasing myself. Awesome videos!!
Wow!!! Husqvarna couldnt have sent their product to a higher qualified professional than you my freind!! Someone who will give an HONEST opinion on somethi g and not beat around the bush...i will pay fir a heavier saw, better quality in parts etc...hands down the best on the market....and borther, you had us rollin on the open fly comment at the end😂😂 what a honor buckin, you deserve this one ❤❤🪓🌲🪵🫵🫵
still rockin’ the “triple nickel” 555 autotune. Great saw! sips fuel, and a screamer, great for limbing, lightweight with enough power to chew itself quickly thru a log without dogging. I like the adjustable oiler, super easy to change the flow rate, esp. handy for longer bars. Wasn’t sure about the autotune when I purchased it….but a fan of it now, for sure. Leave your tuning screwdiver in the box, Billy….30 seconds full throttle in a big log, tunes itself wonderfully! From a 35° hot summer day, to -40° up a mountain, it starts and runs like a top….and after years of use, I can attest to its durability, no loose floppy motor mounts, the antivibe is very good. Thin design is a joy to operate…power to weight, hard to beat! cheers from northern BC
A huge thank you to Husqvarna for their generous gift and for putting their trust in you. And to Christine for organizing it all 🙏❤️ You're going to enjoy the heck out of this, and so will we. And Husqvarna will get an honest, well-educated review. Doesn't get any better! I'm looking forward to seeing where you can go with this ☺️🌳🌲💗 All in good time ...
Husqvarna, you made a GREAT DECISION letting Buckin try this saw. If he likes it, I will buy one just like it!
I work for Husqvarna group in Huskvarna and I diecast alot of the parts for these saws.
Amazing feeling to see a saw in your hands smiling away!
This made my day Billy!
Greetings from Sweden
Love your city. We've visited Jönköping last summer and of course we went to the husqvarna museum👍
@@german_arborist Makes me proud mate! Thanks
Brother when I went to the factory in Sweden it solidified why i felt i had something superior in my hands all these years ,,please say hi to the folks on the line for me , sincerely, brother thx
Keep up the good work @saltade !
i have a tiny 460 and I love it, just for around my 40 acre farm with 24 acres of wood on it, The saw is perfect I use an 18 inch bar and couldn't be more pleased with it. Starts second pull cold always.
You're a great brand ambassador for Husqvarna, Buckin'. Always fair minded, always honest. What you have to say in favour or occasionally in criticism of Husky's saws is weighty, considered and offered to help everyone do better. No better man, no more deserving. Thanks for being who you are buddy.
thx pal
Good man North
Classic parting words "my fly's been down the whole time, probably got some saw dust in there" 🤣😂
As a Swede, i love all our god brands an super good quality we as a small country can produce.. Sweden with love..
can wait to bring my wife back , love
Excellent work from Christine who has been essential running the Buckin store and being an integral member of the Buckin team. 🌲🍀♻️💚
Christine is the OZ behind the curtain
So wholesome seeing a person truly love something so much with so much passion AND gratitude as well!!
Definitely a smart move in my opinion by husky , they will get an honest opinion how good their saw actually is congratulations Buckin!!!
I have that saw. It RIPS. Favorite saw I own . There is a bearing on the crank. Clutch side. There is a hole in the center. Slam your bar grease tool in that hole 4-5 pumps.. made a WORLD of difference. Crazy smooth after that lol
Loved the video and the soul that presented it. Its a great gift given by husqvarna to you, and a great gift to us from you. Thanks.
Thx Paul
Well done Husqvarna! You couldn’t ask for a better brand ambassador or better man than Buckin Billy Ray! Love you all! ❤️✊
Christine way to follow through on this super gift, you are always on top of things. 👍👍
As soon as that saw started . The look in your eyes was priceless 😃. It was go time.. Great video, thank you.
Everyone barks on about the weight of husky but it's balance and feels nice in the hand, gone from 372 to 560 to 562 to 572xp and all the while I'll had the 390xp and ill never change good work buckin
I get such joy from your videos buckin’ You are such a great man! And an inspiration. Thank you so much for all you share with us!!
I appreciate that
Good for you. Good things come to good people and your good people. Bless you Buckin.
Absolutely loved your appreciation of Husky & the expressions of joy & amazement. I will be buying one soon. Many, many thanks
Bought my 1st Husqvarna saw back in 1997, still run it. I had to rebuild the carb once, other than that just normal maintenance has kept it running. I do have 2 newer saws but they’re Husqvarna’s too. I’ve run other saws but they just don’t seem to stand up to my fleet of Husky’s. Oh yeah…… at 69 years old my saws still get used at least 2 days a week. I might be old, but I ain’t dead yet!
Im using 562 markII for two months. 5 days a week, 7-8 hour a day. Great saw so far, excellent balance and amortization.
Mark II has more space between muffler and crankcase, more radiators on cylinder and bigger air intake on a starter side.
You deserve all the love you get because you're a great man and a master of your work 🎉
That was a really fun unboxing. I knew you would find a way to start it and find something to cut. Too hard to resist. I love my 254xp 30 year old saw. Has run like a champ.
Husqvarna USA. That was a board room discussion from the corporation it's self, to send you that package. I would say it took several marketing managers across the US a lot of time, emails back and forth, watching your UA-cam channel, just to get the feel of the reason why they would all agree to send a person that is not a Husqvarna dealer, a saw, bar, chain, and shirts. Dang write man, I would be honored as well. You have arrived, and a great retirement awaits. Good job Buckin!
hay buckin' a shout out for are love of God given management of are forest's,heat,building and the works ect ....after 15 years owning a delmar 5100s bucking dozens of semi loads of hard wood each year for heat and the free stuff .when the saw was new I logged for a saw mill a year and 1/2 never been to the shop runs great so,,,,love to see dalmar vr's husq thats all thanks Frank,,,
We've ported and sold 10 of these since first weekend of Dec. Props to husky for the upgrades they made on these
Hello, could an autotune be ported? I mean by the time you change a muffler and go for a bigger one, is it a must to port an autotune model? Thanks
@@sokinfragoul yes the porting adds quite a bit to these
Congrats on new saw! Had my 562 since 2017 and its always ready to rip, 562/372 my most used saws. Hope you like it as much as I do 💪
I've had the prior version of the 562XP a couple years now. LOVE it!. Such a great all-purpose power saw.
I have the older 562xp running a 24" every day. Updated the air intake a while back. The largest bar" recommend" by Husky is a 28". Found it just could not keep the speed up in the hard wood under it own weight. If you want it scream all day 20" is the best. I didn't have many trees over 24" so falling and cleanup can be done with one saw. One thing like and hate is the run time vs the 70cc class. Limbing and bucking in the heat it just keeps running and I run out of gas first. 70cc saw( MS462) goes dry in 15-20min, way to short.
That X cut chain profile is impossible to maintain with a round file only. Husky needs a file to match that profile.
Overall the 562XP has been a great saw for me. last year I got the 550XP mark2 as a climbing saw with 20" bar.
I run a gen one 562 and LOVE it. Just recently it developed a idle issue. It will now get sent off the boys at rip saw for them to repair and sprinkle their magic pixie on it. That 562 is a true sleeper. The saw on a 26” with that chain is the combo of the century.
I’ve been running a 562xp for 10 years now, only mod was the filter upgrade kit, never had a problem just a great mid range saw.
That profile is exactly how i grind my chain for myself and others every cutter has given me very good feed back i also bring the guides down a little more than recommended depending on saw size and wood species hardwood or softwood etc!!
You captured the energy and excitement of a kid the night before Christmas 🎄that’s why your videos are so addictive, that and the sound of a well working power saw centres me, brings me back to good memories of me with my old man out in the woods. ❤2U and all that you do.
Great comment. Thx friend
Im glad they kept their fisher-price bubble. that skweek skweek brings out the inner child in me too. Keep the HUSQVARNA box for a carrying case. LOL happy cutting. Stay safe
I own a mark 1 562. Love it and have the wrap, dogs, and recently piped it myself. Love it even more. It's not the most powerful saw, does what I need it to.
60 cc is small , Ill bet the pipe helped did ya only try on or several?
@@BuckinBillyRaySmith I took my factory exhaust apart and opened it all up. Welded a bigger square output. I owe my inspiration to modify my saw to you and your passion for saws. Thank you
I just bought a used 592xp with full wrap and 32” bar and I LOVE IT. Added a Husky 24” lightweight bar (I think it is actually a rebranded Sugihara bar) which is great makes it so light and easy to use for small quick jobs.
Fantastic content Buckin and Husqvarna! Like Christmas morning! I was looking at a 562 the other day, thank you!
Well done 👍 Buckin and about the barn door being open the animals needed some fresh bedding anyways 😮😊❤
i have like ten saws lol im set for life. i have a 7310p , ms500i , ms462 , cs590, cs390, two ms170, ms250, 545 mark ll, 3 hortzformma (76cc, 90cc and 120cc)
You got a free saw and I got one, wow we must be brothers or something. 😂
Enjoy this super gift, Husqvarna well done. 👍
Very happy for you. Like giving to a grandchild on Christmas day.
I file that chain topcutter with a square file at 90-Degree horizontal to the bar good in all wood hard and soft or dirty. Lasts a long time when filed.
groovy
Wow, congrats! Wild timing, I pulled out my 560xp after running my 500i and 572xp today.. and it ripped! Amazing they sent it with a 28" bar too. Health to enjoy brother.
thx ol" bean
That’s a huge deal man. Congrats on receiving that saw from husky. Even tho you are such a well accomplished man in the industry this is like the final stamp of approval. You will honestly be remembered forever by myself and many thousand of others. I’m 35 and will hopefully still remember everything that I have learned from you when I’m an old man. I have never watched any other channel for power saw info because I could tell from day 1 that you are the real expert.
My first chainsaw was a Jonsered, and that is what I mainly own. I was really upset when they Axed Jonsered. It is good to see Husqvarna to something so kind as this. Makes me kind of feel like giving them a chance. I know they were all the same on the inside, but I felt really bad for my friends shop that sold Jonsered. They are mainly selling echo saws now, and I never liked echo's except for the 2511t (but even they have weak trigger handles, and the wire lanyard is weak also). I love my Red saws, but I agree that Jonsered/Husky saws are built tough. I remember when one of the guys on the logging crew I used to work for, accidentally drove over a 2171 Jonsered with the skidder. We robbed a bunch of the plastic off a dead saw, and had it back in the wood a few days later. A few years later a friend that is a die hard stihl guy, had that happen to his saw, and there wasn't much of anything left to salvage.
Thank you for sharing this Buckin. Thank you Husqvarna for recognizing a man that sincerely loves your chainsaws. Congrats Buckin. 🌲❤️🌲👊🪓
Taz, you are 100% correct! This man has always been extremely clear about how he feels about Husqvarna. He is indeed the reason I went the Husqvarna route myself.
Just bought one last week, running it in hardwood in upstate NY 20” bar . Love it 👍🏻 it’s not my 372xp but a close 2 nd it’s lighter faster and very nimble in your hands .Looking forward to your review. Remember Get the gullet !
I have always been a sthil fan boy , small compact torque in spades , but my dad left me an old husky 42 and it is Just so easy to work on logical functional
JUST NICE ENGINEERING !
I could be converted
The Husqvarna is a great tool. All of them have benefits and downfalls but these 5 series saws are incredible to run for sure!
I’m currently updating my herd. Recently sold off my beloved 661. My 460 is starting to show her age. So I bought a 500i to replace those 2. Mind blown so far. Now my johnsred 2065 is aging as well so now after the 500i purchase and the older I get the less I like to have to figit with things so now I’m thinking about a newer 60ish cc saw.
Sweet! Happy Husqvarna is grasping your channel and the whole community. That being said as a proud “East Coaster” I run a full wrap handle. You made me a believer in its handling advantages. Great content and want to see how you show its worth.
I think you will love those x cut chains the 83 and 85 both are great chains ⛓️ they cut better than any chain out the box that i have ever used and i have tried a lot of different brands
What happens when you hit a rock and have to file it ?
Don’t take pain meds. Pain is our guide to healing and letting us know what we can and cannot do in the healing process. I had an L4/L5 discectomy early in my career and was climbing in two weeks with out pain control but the pain guided me.:) I know you probably know this friend:)
It was a good sentiment and to have them send you this saw was truly a great thing.
Nice saw, I just got a new 550XP. The 562 is the only one I haven't got, got the 3120,592,585,572. Got to love the Huskys 👍
"My Flys been down the entire time" Best unboxing video Eva. I purchased this saw just before Christmas. Have yet to start it, but cannot wait to get it into the wood. Love love love Husqvarna!!
Buckin! Hope all is well. You have been a great ambassador to the brand since day one brother. Super cool to see Husky send you that saw!
I got a 562xp from a client whose husband passed. I showed up with a small ryobi to do a basic job. She gave me the husky to try but I didnt know how to start it at the time. End of job she gave it to me. Got it up and running and 1.5 years later,. I use it on all my jobs.
I hated the brake release/cap issue though lol
Super nice saw Buckin! Enjoy the little saw with tons of power!🤩🤩
Have a 562 and 28" 3/8 .050 with a wrap and dogs. Stand up and buck!!!
Congratulations Billy! That's awesome Husqvarna acknowledged your hard work, dedication, commitment to the logging industry. Well deserved enjoy friend
I love my Husky, my dad bought some cheap Poulans as back up and truck saws, didn't realize they were made by Husky as well. For a loose, cheap saw those run like a scalded cat.
Not made by Husky, but owned by Husky...actually, Poulan makes some of Husky's low-end consumer saws, usually the 2 cheapest models they offer....
I like that Husky chains are coming with that one gold colored link to make knowing where you started sharpening easier
just bought my first chainsaw and its a husqvarna mark II! I'm loving it so far. easy to opperate and handle and cuts like butter.
I gotta be real with ya, I'm feeling a little envious. I need a new saw so bad. Been looking for a new one but just can't do it until I get back to work and get some money coming in.
So awesome what Husqvarna did and sent to you. That's awesome brother.
You are not alone brother. And likely, there are many others also that feel your pain.
But life will do this sometimes and seems not to care.... it passes over that man in need, to bless yet again, the man that needeth not.
Something like that...
Oh man how cool! I’m learning and will be looking for my next saw. Currently have 45cc with 18” bar. Want something a little bigger maybe 70cc range, but that looks like an amazing saw too!!
Just bought one of these myself last week as my FIRST chainsaw. Got one with the lightweight 24" bar and the C85 chain. I LOVED WORKING WITH IT IMMEDIATELY...but I don't have any real experience so what do I know? Not much I can say that! Anyhow, its really good to know that an expert on the subject also finds the saw so satisfying to work with. Can't wait to see you run it with a full wrap and a muffler mod.
I’m with you on husky’s, 20 years of log home building and 15 years of mobile sawmill business and always a husky!
I’m a Stihl only fan but happy to see Husky pull through with that for you.
Thx
Just got into saws and pre ordered this one with the 28" for my first pro saw for a Christmas present for myself. Been watching and learning from you since I bought a 445 of a buddy. Glad to see you getting recognized by Husqvarna! Mine came with the double dogs separate in the box. Just need the full wrap handle now.
I’m a stihl guy but right now stihl honestly doesn’t have a model I’d be willing to shell money out for. Been really looking at these 5 series saws for the last few months. Maybe not the lightest saws but they look like winners. Love your content and your faith. Please don’t ever change
to Late for changin' somethings now brother ... evoling perhaps ... love ya.
ALRIIIIGHHTT!!!!! YES!!! Buckin this is SO COOL! I know I know you always say "friends, just one pound difference, just one, and you get all the extra power of a 70 cc saw.... just get a 572" I know I know but I just LOVE the 562! I am SO excited to see this in your hands again. You had 2 other videos with it, I guess it was someone else's where you ran a square grind,.325 32 inch bar and it did great! I can't wait for more 562 content there's just something about that saw that gets me happy. THANKS HUSQVARNA!! Buckin you are their greatest salesman whether you or they know it... I am SO EXCITED!!!
Congrats on the new saw, Buckin. Man that's a cool freakin saw!! My dad always ran huskys and by default so have I. Can't get a better saw!! Also my 1994 Husky 61 runs a 32" bar like a boss. It'll absolutely run a 28!!
Its about fricken time Husqvarna!
Wooooohooooo Buckin 🤩 ya look like a believing youngster on Christmas morning 🙌 glad to see you being supported bt the industry 😁 stoked for you Billy and big thanks to Husqvarna for giving you big love! 🫶
Aloha brother
Of all my Husqvarna saws, the 562 xp (2018) is my favorite. Came with a standard 28" and I add wrap bars and switch to the then new Husqvarna lightweight bar. Has no problem with all the oak around here. Have cut up to 36" without a problem. I run the oiler wide open. Looking forward to how you like the Mark II, been thinking of getting one.
Nice saw.
A few guys have figured out how to duplicate the c83/c85 chain profile. You sharpen the top plate with a stihl hexa file then hit the gullet with a 5/32 file. Similar to the baby C you showed us but with a square/hexa file.
It's not an east coast saw until you stick a 16 inch bar on it lol.
You can't watch Billy without grinnin'. Huskie would be wise to flood him with saws, great brand ambassador.
Love my 562 mark2. It’s a mid sized workhorse and nice to carry into thick brushy areas vs a heavier saw. Once you open it up a bit with a light port and a pipe it is hard to NOT want to grab that saw first
I have a 565XP auto tune with a 28” bar and I love it. I’ve put the 28” bar on my 61 and it’s great!
I like the husqvarna saw. Keep making videos Buckin and have a nice day.
Buddy good for you! I've personally been running a 562 since 2018 and habe loved it.
kool
Hi Buckin, I have been waiting for my dealer to get one of the 562xp Mark II in. I'll be watching for your review of this saw. I do have experience with the X-cut chain and I am very impressed with how it cuts. I have profiled a wheel for my grinder to replicate the grind Husqvarna has put on this chain. If Husqvarna is watching, offer us a CBN wheel with an X-cut profiled wheel for the Oregon grinders. Then the dealers that offer sharpening and the end user with a grinder could continue sharpening the chain with the original out of the box grind with ease.
Do you know what the difference between the regular 562xp vs mark II
Good to see you still getting excited about a new saw after all of the saws you’ve owned. I’m happy for you. Congratulations
Hey Buckin Billy. I have been watching your UA-cam channel for a while. Love the channel. Keep them videos coming. I myself am starting my own business in woodcutting and tree services. Just wonder if you had any words that might help me out. If not I understand. You are a busy man lol. Pray for me and my family. God has got us. I know he can do all. Just thought you might have some words. Thank you for the time and the great videos. P.S. love those old and new Ford trucks. God bless 🙏✝️
Heck yeah buckin and a full wrap I'm interested to see what changes they made compared to the old one
Very nice of them to do that! I like the C85 chain… cuts really well straight out of the box… I’m interested to see how you resharpen it as using a round file will change the shape of the grind… 👍🏻
Very nice Mr. Smith...
Hey Brian, I would like to get my hands on one of them there Mark ii to compare! I know you like yours buddy!
I bought my first Husqvarna a few weeks ago, the 460, it's the best thing I've ever used. Wish I got one earlier.
I had a older one in Alaska when they first came out and loved it ! Looking forward to getting my hands on this new one! Looks like a ripper!!
God I love you, you're such a raw human, just a real good guy. Proud of you and your achievements. I've learned so much from ya!
That's awesome Buckin Billy! You should be a Husqvarna representative or engineer for them atleast! You definitely know all about them. That's the saw I've been thinking about purchasing myself. Awesome videos!!
I want it just in the 24" inch. Let me know how you like it?
Love it man. Keep making videos and always. Be kind honest and hard working 🙏🏻
Thank you 🙌
Sweet looking rig, hope it works well! I'm a husq man too
Wow!!! Husqvarna couldnt have sent their product to a higher qualified professional than you my freind!! Someone who will give an HONEST opinion on somethi g and not beat around the bush...i will pay fir a heavier saw, better quality in parts etc...hands down the best on the market....and borther, you had us rollin on the open fly comment at the end😂😂 what a honor buckin, you deserve this one ❤❤🪓🌲🪵🫵🫵
Really blessed. It’s nice to see you so excited! 🪓🌲
that saw is quick.....thanks for sharing. I like Stihl but there is always room for another saw......lol. thanks for sharing.
still rockin’ the “triple nickel” 555 autotune. Great saw! sips fuel, and a screamer, great for limbing, lightweight with enough power to chew itself quickly thru a log without dogging. I like the adjustable oiler, super easy to change the flow rate, esp. handy for longer bars. Wasn’t sure about the autotune when I purchased it….but a fan of it now, for sure. Leave your tuning screwdiver in the box, Billy….30 seconds full throttle in a big log, tunes itself wonderfully! From a 35° hot summer day, to -40° up a mountain, it starts and runs like a top….and after years of use, I can attest to its durability, no loose floppy motor mounts, the antivibe is very good. Thin design is a joy to operate…power to weight, hard to beat! cheers from northern BC
Good looking saw! Can’t wait to see what that baby is capable of I’m excited! Great video Buckin!
I had 3 of them ,,they blew up at 152 hours,155 hours and 157 hours ,,crank bearings go on them ,,switch to Echo ,,2 yrs running the same saw
I'm impressed by any engine starting on the first pull.
A huge thank you to Husqvarna for their generous gift and for putting their trust in you. And to Christine for organizing it all 🙏❤️
You're going to enjoy the heck out of this, and so will we.
And Husqvarna will get an honest, well-educated review. Doesn't get any better!
I'm looking forward to seeing where you can go with this ☺️🌳🌲💗
All in good time ...
wonderful. Congratulations, it couldnt have happend to a more deserving and apriciative dude.
Billy thanks for showing what a stock saw can do. I know you liked them warmed over.
Good things happen to good people Buckin. Work hard be honest be kind!!
And do it for a while , love ya Bry