Це відео не доступне.
Перепрошуємо.
38% Airflow Gains !! Testing Ported Diesel Heater With Vevor Meters
Вставка
- Опубліковано 28 бер 2024
- If you would like your own Vevor Anemometer, Carbon Monoxide Detector or Diesel Heater, there are affiliate links below. If you use those links to make your purchase, I get a small kickback. Use code VVSALE5 for 5% off. Thank you !
Carbon Monoxide Meter:
Canada - s.vevor.com/bfQX82
USA - s.vevor.com/bfQX8P
Anemometer (air speed meter):
Canada - s.vevor.com/bfQX8C
USA - s.vevor.com/bfQX7k.
EU - s.vevor.com/bfQX8r
DE - s.vevor.com/bfQX7x
FR - s.vevor.com/bfQX7I
IT - s.vevor.com/bfQX7O
ES - s.vevor.com/bfQX72
PL - s.vevor.com/bfQX8c
NL - s.vevor.com/bfQX8l
Basic Diesel Heater: On sale till the end of March 2024
USA - s.vevor.com/bfQTWP ($101.99)
Canada - s.vevor.com/bfQTWZ ($119.99)
AU - s.vevor.com/bfQIN2 ($156.99)
If you would like to support me and my projects, I have created a Patreon account. Regardless of the amount, every bit helps, will be put to use and is awesome motivation. Thank you so much !!
My Patreon - / joel_a
The Joel Arseneault UA-cam channel where I do mostly jetski stuff that is much more edited. / @joelarseneaultyoutube
My Teespring - spark-bolt-city.creator-sprin...
Actual Description: In this video, I use a Vevor Anemometer and CO meter to see if my porting job did any good... the results were shocking !
NOTE: It should be noted that a properly working diesel heater (tuned properly and with no issues) will not produce much CO... I am purposely running my heater rich (at high elevation in normal mode) so that I can determine if the ported housing will be an improvement.
If you have a heater that is working well, and you introduce more air, it will almost certainly make it work worse, and possibly cause it to produce more CO.
Just checking in Joel. We are all waiting, but you do not owe us a thing. Remember, the sun is the most beautiful after the shitstorm is done. Keep givin'er.
Thanks for the comment, Bill... sorry for the delay... just seeing it now. I saw your comment on my latest video, but am just going back and getting caught up on some old ones.
I appreciate your comment. Thank you. Some days are rough... but, some days are always rough. That's why we need to appreciate the good ones, right !
Thank YOU! for sharing and continuing to fiddle with the diesel heaters along with the other things you show. Basement is looking nice. In a few weeks you'll be wondering why you didn't do this sooner and you'll experience peace in a whole new way.
Haha... let's hope things work out, so that in a few weeks I am where I thought I would be, when this video was edited / posted...
I'm happy with the way the basement is turning out, so far.🤟
Dude.... Keep your chin up and your head held high brother. You've got a good head about you, you're smart, and I believe in you to get it done. Ok, positive encouragement aside.... Now you can beg for likes by telling folks to push all your buttons like your ex. 👍, sub, etc. Keep doing you... Make some vids.. ideas will come. Some folks come thru for quick info only... But those of us that keep coming back, do so because we're interested in YOU, YOUR IDEAS, YOUR CONTENT.
I ... ... WE... WILL BE LOOKING FOR YOU IN OUR FEEDS JOEL.
HAHA "push all your buttons, like your ex" ... well done.
Thanks for your support, and I will keep making videos as I have time to make them.
I would love to watch some lawn mower repairs videos if you can squeeze some in, I think many of us are versatile that way and also VERY sorry for the separation. I was divorced roughly 7 years ago and it hurt like heck, but I survived and here to harass the world still. You are awesome mate for continuing on and keep doing what you can!
Thanks for the comment.
I may try to make videos of the lawnmower stuff, but I am a 100% mobile service and have to take people's privacy into account. Editing can also be a challenge, when I am working 12-14 hour days during the summer.
If I can get a renter and build a safety net, that would allow me to relax a little and spend time doing things that may not be as profitable, like making videos. I know that those videos could do well, If done properly, but it is not guaranteed.
Your vids are always worthwhile and interesting mate, appreciate the need to eat and have a roof over your head. All the best to you and I'm sure I speak for all when saying I look forward to your next one whenever that may be :-)
Thanks for the comment and support. Much appreciated.
"appreciate the need to eat and have a roof over your head"
Vevore Veror Vevor vepvor whatever. Love ya buddy, but too much.
@@billparker8954 I quite honestly didn't want to publish this video (at this time) and wanted to focus on my self cleaning heater, but that didn't work out for a bunch of reasons. Although this video featured Vevor products, it really wasn't about the products, and even in the title, Vevor is an afterthought. This video was about checking the air flow and CO and just happened to use Vevor products, and the test wouldn't have gotten done at all, if I wasn't obliged to do it.
I am currently in a battle to get a mortgage and may be declined and homeless in the next few weeks, so yes, keeping a roof over my head is a real struggle. The only way I can currently justify making any videos, is if I need to make them... This video, and a plasma cutter video I will be releasing, are a week behind schedule, and the only reason they are getting done at all, is because I told Vevor they would be done, and I try to stick to my commitments.
I have been very reckless with my commitment to making YT videos, as it costs me money to keep the channel alive. I use money from my summer job to fun my projects. This winter has been the most promising with one month, January, where my channel ( YT, Vevor and Patreon) made more money, than I spent making videos. All this to say, Vevor is some justification to keep making videos, but all in all, I'm not sure how long I can justify keeping it up, and as you may have noticed... videos have become less frequent.
I'm not looking for sympathy, I just like to explain my side of things. The only reason this video got made, and it wasn't weeks or months until another video, is because weeks ago, I told Vevor the videos would get made, if they sent me the products.
@@loweredexpectations4927Hi Joel, I apologize. I should keep my mouth shut sometimes, especially when I'm cranky, and base a stupid comment on the title, and not content that I haven't even viewed yet. I watch your content all the time, and so do people that happen to be in my living room. I hear them say "He seems pretty cool", "Hey, he's a good genuine guy". They love you for the same reasons I do.
You have the mind of an engineer, and you deep dive and follow up. I've watched many videos of people burning alternate fuels over the years, and it's "Yea! It works!" without dealing with the coked up aftermath.
It sucks dealing with divorce (me too) and it's gonna be a hard road, even harder than producing quality YT content like you do. You have character and a work ethic, but you also need a very good lawyer. Watch out for copy machine lawyers that do a quick calc based on your financial worth and press print. They can cause problems that you will have deal with for decades. Find a fighter that is willing to go to court and actually challenge a bad deal for you.
I hope to see more quality content from you, especially if it concerns a mower with a 179cc Kawaski engine 😀.
Thank you for all the videos you made. Best of luck to you, and I'm hoping things turn out well for you so that we can enjoy more of your experimentation at some point in the future. Looking forward to it 😊
Thanks for the comment and support. Much appreciated. I'm sure things will eventually be much better.
My expectations are never disappointed with you. Great video again!
Thank you !
Sad to hear that, but you do a good job of posting videos. I will continue to watch your videos. I have been in that situation.
Thanks for the comment and for your support. Much appreciated!
Excellent, any efficiency like this can only be applauded. Great work, fella.
Thanks !
Great video 🙂 Cats always take precedence over what we are actually trying to do as well 🤣
As another note. I had previously said I was fairly underwhelmed by the heat and airflow out of the heater I got. I ended up getting another heater from a different brand, and the airflow and heat output is WAY more. I think the "5-8kw" I got was actually a 2kw running full tilt. The "1-8kw" I got I think is actually a 5kw (maybe it is the larger body 8kw but I haven't taken it apart yet), that has around twice the airflow and heat output. The wild wild west of numbers from the China manufacturers eh. I am very impressed by the second heater that has the better ECU and controller, now that I have learned more about these heaters too.
Ooo I am very interested in the plasma cutter as well! The couple times I have used one made me realize just how freaking awesome they can be!
Damn, sorry to hear about the negative situation you are going through. Good luck with everything going on!
Haha... yes, cats always matter more than whatever else is happening.
That's interesting about your heater. Haven't you ever calculated the fuel flow ? 1L is about 10 KW, so the math is fairly easy if you work backwards from there. I have only ever really seen 3 different heater styles, though I know there are more. The small 2kw, the 5kw that is sometimes called an 8, and the larger bodied unit ... and it has a more aggressive fan, that is for sure.
I owned a plasma cutter for a few weeks, many years ago, and someone walked away with it, haha... I still have the safety glasses and sold the case cor $60... I'm good at investing. It will be nice to have an affordable one that I am not worried about.
I am hopeful about my situation and if things go well, It could be better than ever, in a year or so.
@@loweredexpectations4927 I never calculated fuel flow with that model, because I ended up getting refunded due to a squealing fan at low speeds. It was still covered under Amazon so I just got a refund.
I believe my new unit is either a 5 or 8, but I haven't calculated anything yet. I can just say I am very happy with the new unit I got.
That really sucks about the plasma cutter growing feet...
Good luck in everything you continue to work towards, and well be here whenever you come back.
Vevor is lucky to have you! I hope you get stuff for free.
Thanks ! They have great products and I do get them at no charge... I am obligated to make one video per product, but I often make lots of videos promoting the ones I use often.
Griswold no offense, it seems you have gotten yourself a job with VeVor 😁
I think your a very likeable guy, and any personal problems, I am sorry about !! Trust me we have all been there and somehow survived 😁 , and we all know it's not a easy thing to overcome . Do not lose your good mood, as life are pretty crazy for most people, no one goes through life without bumps and bruises have hug 🤗
Thanks for the comment ! Things will get better, I'm sure... just not sure when.
Vevor has been pretty good for me... keeping me busy, entertained and motivated to keep making videos... so that's all good.
I am very much aware, that as much as life kinda sucks a little bit right now, there are MANY people much worse off than I am, and I am grateful for what I have.
Will definitely be joining patreon in the next few days, I can relate to the situation, Head up dude 👍
I will take all the help I can get, at this point. I think a lot of people can relate to this situation, unfortunately. Thanks for your comment /support.
Just when I thought my expectations could NOT POSSIBLY get lower... Great vid!
Haha... thanks!!
My cats were really surprised to see that another human besides me would stop what their doing , and give them the attention they needed at that rare time that they want to acknowledge your mere existence. I am sure they would give you a thumbs up as well if they had thumbs.
HAHA... Yeah... You need to take the attention when you can, because it generally vanishes quickly. Cats are awesome and hilarious.
Thank you for showing the speed in MPH in the subtitles, it is appreciated.
I actually tested it in KMH and MPH with the meter... but showing both would have taken too long and any little discrepancy would have been criticized, haha.... so I just wrote it in.
@@loweredexpectations4927That works great for us in the States, I hope you keep doing that in the future.
So, you had to break up with your partner to properly redo the basement! Well done.
I also went through this but it was very beneficial for me, it pushed me to get out of my comfort zone and build another house entirely, I rented the old house to a company. It wasn't easy, but the satisfaction is worth it and I wouldn't change anything.
Until you find a partner who is on the same wavelength as you, everything is a compromise that is not worth it. I found it :)
HAHA ! It took me 10 years to build a garage and 1.5 bathrooms ... so yeah... It took this to motivate me to "finish" the basement in a reasonable timeline.
If I could live in my garage legally, I would rent out my whole house, haha... I'm not going to be looking for anyone for a long time, or ever... perhaps someone on my wavelength will find me, but I'm not holding my breath.
I'm glad things worked out for you... Thanks for sharing !
Again, Great videos. I recently watched a video on a newer 2KW Vevor heater with new style ecu/control head. It heats to set temp, shuts down totally, and then starts up totally to maintain set temp. I hope I can upgrade to these electronics, for the 8KW heaters from suppliers.
I'm guessing that next fall, you will start to see more and more of these electronics being released... I would advices to buy the controller and motherboard (ECU) as a set... I have heard lots of stories of people buying a controller and then not being able to connect to their ECU or to find a compatible ECU
@@loweredexpectations4927 Thanks again for your reply, and insight. You have great skills and smarts, and you will do fine going forward. Best wishes for your future. 🇨🇦
@@stevecarlisle3323 Thanks, Steve.
Wish you all the best lots of work in your working season 👍 😊
Let's hope that it's a good one. They are saying that it is supposed to be a drought, due to lack of snow in the mountains this winter... so that wouldn't be good. We currently have snow and as a result a few of my April bookings are asking to reschedule... Understandably.
Sorry to hear about your separation. I've been there too. If you wanted it or not, it's not easy on the pocketbook or the heart.
Maybe your videos could morph into showing us how you're rebuilding your basement and life as a landlord.
Thanks for the comment. I had considered showing some of my house stuff. Most people would be supportive, but the inevitable negative comments would hit in a different way, with this being ... a little more personal and already hard.
I am fortunate to still have a place to live and things will get better. Thanks for your support and comment !
@@loweredexpectations4927Yea, I understand about the negative comments hitting to close to home. Some people are insensitive.
Just got my vevor usb 1200x microscope with 7" screen in.
I have a bunch of vevor tools. I'm going to be buying 4 more vevor items off of ebay.
Personally I think their tools are a great value for the money.
The way I see it is, I'm on a fixed income now and I have a lot of projects I'm working on plus I do maintenance on the side.
I look down at my 2 hands, one has a vevor tool in it, the other one is empty.
The one hand is getting work done, the other hand is just scratching my butt.
Know what I mean? 😂
HAHA, They do make decent stuff... good value tools.
I believe that you can use my discount codes on everything that you buy. Also, if you ask me for a affiliate link, an any item, it doesn't help you, but I will get credit for the sale, haha.
I have been considering one of those microscopes for inspecting lathe and milling tools.
Hey buddy, hope you're well and enjoying the lack of nagging. 🤣🤟🏻👑🤟🏻
Haha... Thanks... I'm doing okay, and if I'm honest, I am a much worse critic of myself, than anyone else.... so the nagging continues.
By leaving the inlet nut off or cutting out the inlet screen you gain @ 10% airflow and a 5% efficiency gain. It would be nice to know the actual efficiency from calculating the Delta T, by using the temperatures and airflow, before and after porting? With your caveman controller, you mess up the CO to very rich to begin with and then lower the CO by porting. As your only rpm control on the motor is voltage and back pressure, you need to take the two different rpms, between the standard blower assemble and your ported blower assemble into consideration as this is changing your amount of fuel burned. As far as heat per fuel burned, my WAG is the Vevor with Alpine fuel control matches or exceeds the efficiency of your ported blower. We measure our CO at 6 inches and have 18ppm on each of 2 Vevor Alpine at the highest setting. If you are burning more fuel, more efficiently than a Vevor Alpine you may have created a 5kW heater?
I have removed the screen from one of my nuts and have noticed a huge temperature difference.
Mapping and calculating all of the changes is honestly a little over my head, and would require a lot of data tracking. As the fan speed changes, the air flow over the exchanger and the combustion air changes. A decrease in heat can be because if more heat being carried away, but also the same amount of heat is probably not being made due to the mixture change / cooling effect from combustion air.
What I basically did in this test was run the heater rich due to my elevation, and then calculated it after porting. I am at about 4500 feet, and my heater cuts fuel (in half I think) at 210C to keep things under control... so the results would be more drastic IF I were to use a different control system, for sure.
Yes... my heater, in alpine mode is only around 12-18 ppm as well. This whole idea / test could be expanded on for sure... and it would be interesting to see how much fuel it could handle with the porting.
Good job bro
Thanks !
So sorry to hear about your personnel problems just hang in there, love watching your videos, do you ever sleep? I was In my workshop and I have 10 litres of Model Engine fuel, have you tried this In one of your Chinese Heaters?, Just wondered. I've only mixed a unmeasured amount to my diesel just to get rid of the stuff, do you think its something that you could experiment with? contains Methanol, keep those videos coming.
Thanks for the comment... sorry for the delay... I've been busy.
I would love to try some nitro fuel... I assume it won't run well because the ration will be way too lean... may run, but not make much heat... but I could be totally wrong . I want to try it BUT it is about $100 a gallon here, haha.
Condolences on your financial situation, also congratulations on the divorce. 🤟🏻🤟🏻👑🤟🏻 Keep your chin up buddy, now you can play in your garaaaage anytime you want
HAHA... I always played in the garaaage when I wanted to anyway... and made videos when I wanted... and didn't rebuild the basement.... That MAY be part of the reason this is all happening or an elaborate trick to get the basement built...
Thanks for your ongoing support !
@loweredexpectations4927 FYI I have no intention of pulling my heater apart, but I still watch the videos cause your way of thinking and your on camera personality. I say that to say, I think you should make videos about the lawnmower fixing. I think you'd get people watching. Anyway, just a thought 🤟🏻🤟🏻👑🤟🏻
@@KingofallDiffs Thanks ! I appreciate that. I have considered doing this, and I do have footage from last year, because I thought I may publish videos. There are a few tricky parts to this... and I know others have done it... like the lawn cutting guys...
My services are 100% mobile, so I do my service work at the customer's house. This means I have to be careful when filming. I am also a one man show, so setting up shots, talking to the camera, dealing with camera gear is a chore. To top it all off, summer is my busy time, and I need to be working 12-14 hour days to bring in what I can, while the summer lasts.
When you film in a very purposeful way, I'm going to do this thing and get this shot, it tends to be a bunch of 40 second to 2 minute clips... If you are filming with the idea that something interesting might happen, you often end up with 10 hours of footage from every day. Best case scenario, it takes several hours to put together a video that has been shot well... if it goes a little wrong, it can easily take a few days to edit.
Excellent Joel. Sorry to hear about the separation, but probably for the best. Living downstairs could be awesome. Love your videos, at least you don't have to live in the gradge. 😉. One question, can I leave the air intake tube off my heater but keep the exhaust pipe on ?👍👍💚🍻
I'm not going to lie, I'm somewhat excited about the change, but also, I don't like change, and parts of it are going to suck... I just have to focus on the parts that don't suck, as much.
I would live in the garage and rent my whole house if I were able to build a suit out there.. .but apparently they frown upon that, haha.
Yes... Taking the inlet off will likely make it noticeably louder though... I recommend not running it without the exhaust, haha.
@@loweredexpectations4927 thanks Joel, I know things suck for a while, and it's an up hill battle, but pray for peace and strength. Things will work out.👍
1:31 ... Are those triple Eh batteries since you're Canadian ?? 🥁🥁
LOL... I suppose they are.
I have been doing drywall for over 35 years,so if you have any questions let me know.
Oh wow !! ... I probably would have asked some stuff two weeks ago, if I would have realized, haha. I'm doing the final mudding (I hope) now.
Interestingly... some of the drywall that was already installed in the basement, when we moved in, was pre covered in wallpaper. Yes, pre covered, and I know this as it actually wraps around the edges... whoever "installed it" decided to only use 7-8 screws per sheet, so that they wouldn't have visible screws.
Whoever did renovations before me did some special work... I'm not the best, but they were really special.
PS. After doing it a few times in my life, I consider drywalling to be an art form.
Coconut oil midget wrestling on Saturday night in Joels garage.
😅😅
Is this a fundraiser to help me keep making YT videos !?!... I like the idea !!
@@loweredexpectations4927 how big of a kiddie pool does Vevor sell? The more the midgets, the higher the income.
@@loweredexpectations4927 what's the biggest kiddie pool Vevor sells?
Sorry hear about your brake up that always sucks even without the money troubles it can make, I found the video interesting I'm not shocked that the CO level drop, it would lean the fuel mix out it seems like these heaters run just bit rich out of the box and even more so when add intake and exhaust. CO from incomplete combustion this for sure going happen if fuel air mix is has too much fuel, but can still happen even if fuel mix not rich or even if a bit lean but less likely if lean. I buy a 5Kw heater using one your links from black Friday, it making about 20-50 ppm CO there still hint of exhaust smell. It is setup with no intake tube and only one soft 90 bend in the exhaust tube that come with it, does have altitude compensation, I not looked too hard but I not sure cal menu to adjust things but really it not too bad as is, but I have wonder if running it a bit leaner would clean up the exhaust a bit more, I not full installed this yet so there likely be some more bends in the exhaust and if put on intake tube I feel it like exhaust will be even more dirty, I have plan to try test this some. I'm very much looking for your video of the cutter, I'm looking at there 3-1 no touch TC-520 cutter welder combo so you may want throw a link up for that when your doing your video. I also used one your links to buy an ultrasonic I will be setting that up this or next weekend I have carbs need to be clean and rebuild. Best of luck with everything.
I am quite fortunate in that it hasn't been a messy separation. I have heard a lot of horror stories.
I'm not surprised about the drop in CO either... If it were already really low, the extra air could potentially be a bad thing, and I have seen too much air actually cool the burn, and cause more CO.
I don't think 50ppm is crazy high... it may never cause an issue, but it is more than I would expect from a "properly tuned" heater. If you can get more air in there, it should absolutely help with the CO.... If you are already not running a tube, you can just use a hack saw and some drill bits (if you don't have any porting tools) and chop out a hole... it doesn't have to be the exact same as mine... I replacement fan is cheap if it all goes terribly wrong, haha. More exhaust bends will increase CO but a strait 2-3 foot section won't have much effect.
Wow... you have a whole fleet of Vevor stuff ! Soon you can start your own Vevor channel, haha. I will try to toss a link up for the 3-1 in a following comment, for ya.
s.vevor.com/bfQYl1
Please, can you give me a link to the testing devices you have?
The links are in the description below the video.
Joel, I want to get the Vevor 500 watt wind turbine, do you have affiliation for that product?
Hey Tom.... If you haven't gotten one already, I can find one for you... Are you in the US ? I will try to post a link separate to this comment, just incase YT blocks it.
For the US s.vevor.com/bfQZDw
Can you do a cabon monoxide test with the cat . I am joking honest.
HAHA... Poor Quasar. I don't think he has enough brain cells to be effected by CO.
What happens with Mr Bitey
Oh... because of the separation. At first I thought you meant when he gets bighty... He is going with Megan... she is a vet tech and able to take care of him better... Also, I wouldn't want to cause her any extra hardship by claiming or fighting for custody.
I may get to have him visit when she travels or goes camping 🤷♂️
What not port and polished 😂
Haha.. I'll have to get on the polishing and see what massive gains we can get.
Why anyone would want to get married is beyond me! The terms and conditions of a legally binding marriage contract always favours the female and will financially ruin the male. If you were a business man you would never enter a business with those terms and conditions and yet people do it with a marriage contract!! I wish you well and I hope you get some lucky breaks in the future to turn your life around.
I didn't get married, but if you live with someone for over a certain time, you apparently enter a legal contract ... you don't need a lawyer to get into this contract... but you need one to get out.
I am fortunate that she is not malicious or nasty ... it has gone just about as smooth as possible... at least up to now... but now, after making this video, I am having mortgage issues... so that could change.
@@loweredexpectations4927 Yes it’s exactly the same here in the Uk, I should have put a side note saying that fact. Either way it’s a legal contract with the same terms and conditions which doesn’t favour the male in the relationship. I hope things work out for you both and I hope it remains amicable for you both.
Be careful of squatters. Don't know what the laws are up there, but down here they seem to have more rights than homeowners.
Haha. I've been married 4 times, so I don't know if you want my advice, but be careful because it ain't over til she says it's over. Make sure you have a good attorney and everything is in writing.
You're a nice guy and I just don't want to see a video of you on the street in your blow up suit with your wheel barrow, a lamp, a chair and a dog named shit head that abandons you. 😅. 😅
Also, when you get your burn chamber where you're happy with it and you think about selling them, put me first on your list.
Thanks for the advice on the squatters... I have considered this, and while I am a nice guy, I'd feel bad for the person who screws me over, after I dealt with it, in my own way.
I agree with you on the "it ain't over" ... She wants it to be over, more than me, so that is in my favour, and I'm not fighting for custody of Quasar... she gets to keep the cat.
The mortgage is not a sure thing, yet, and it is conditional on a few things, so you may see me on the street, or living out of a motorhome soon.
It is looking, more and more, like this could actually be a thing. I haven't had a lot of time for testing, and it is starting to get warm... but it could actually happen.👍
I finally went for the 53' semi-trailer, off grid on 1.5 acres with a 6' chain link fence all the way around. My oasis of sanity while the world sorts itself out. I'm far from a hermit but only a handful of people have been allowed inside the fence.
I'm a guy, I function on rationality and practicality and have to maintain that space. I deal very poorly with drama.
You're that guy too, and I'm confident that you'll take whatever is thrown at you and keep on trucking.
Nice renovation work! Young men, let this be a lesson. Find yourself a good, young woman, and start a family right away. You don't have time to d1ck around, and you don't want to end up in your middle ages where the only available women have high body counts and problematic dispositions. The modern system didn't push women out of the home and into the workforce to liberate anyone, it did it to double their taxpayer base and to dehumanize and degrade the traditional family. This is not a knock at you Joel, you're awesome, and any woman would be lucky to have you.
Hilarious 😂
@@HB-et5iv 10 months on Twitter and I've gone from a gay liberal to a staunch White nationalist!
Yeah.... I'm already middle aged and I have given up on women, at least for a while... I don't have the time or energy ... I'm not about to start playing that game again.
I appreciate the comment, and the centremen ... I am a treasure for someone, but I am also a huge pain in the ass, haha...
It's wise not to get too entwined with women until we can get government out of the picture, it's just logic. Men have to protect themselves legally these days, what with modern nonsense and all. Happiness comes from within, best preserve it from arbitrary attacks.
@@MHLivestreams Yeah... for many years now, I have been thankful that I am not part of the "dating scene" and felt sorry for those who are. I'm generally happy when I'm tinkering with stuff... It is true that happiness must come from within. 👍
Vevor stuff is pretty low quality....
Care to elaborate or provide a story / evidence, backing this claim ? Great name by the way.
Are you familiar with the phrase "Chinese junk" if not you probably will be soon
@@JimLahey21 I am familiar with the phrase. I'm also very familiar with the phrase "Jap Crap" or Jap Scrap" as I grew up in the early 80s -90s ... and now, they are known for making some of the best quality stuff on earth. The same thing happened / is happening in South Korea, and it is also happening in China...
We keep sending all of our manufacturing to other countries, and after many decades of producing crap, they eventually figure it out. I have a Vevor vacuum pump / chamber, ultrasonic cleaner, flex shaft grinder, stick welder, pipe bender, 4 diesel heaters, adjustable castors, electrical enclosure, extension cord and probably a few things I'm forgetting... None of these things have ever let me down due to being Chinese Junk...
I have had two products from this company that have had some sort of issue, I'm currently editing a plasma cutter video and it had a failure right after I was done filming.
i claim these comments in the name of anarchy ,you may now speak freely
???!!
HAHA.... Thanks ! I appreciate you not totally hijacking my comments.