hi i have the e level on my van but my question is nothing to do with air its about your chassis protection lets say you you got a new car and the floor pan had a few rust spots showing thru what would you do to rid of the rust and then what would you use to add lasting protection thank you btw cool ride
ya im in the same boat. have a 88 s10 blazer that i have bagged / boded . and it taking longer then i expected .. take 1 step foreword and 10 back..lol
Yes I had blue hands video machine some toyota hubs for the front to fit over the nissan spindles. And at this time I was running adapters in the back. But most people will use am old yota axle or ford 8.8 axle which has the same 5x114.3 lug pattern.
Was curious, what was the elevel set up you got? They come in various set up packages was curious what exactly did you eat with it and how much did it run you?
+quickhurley445 I got the elevel package with the height sensors. And I couldn't tell you how much I got it. I got it through a friend who is a dealer of them and got me a discounted price.
scrappingpavement oh ok ya I'm an air Ride business as well.. I was curious about which package you got cuz I see Elevel set up but then I see two separate ones without the sensors lol I was confused lol
Can you send me the link to which system you purchased. I'm trying to do a budget build for mines and trying to figure out what to purchase first@@scrapingpavement
Depending on your setup I mounted the front sensors on the lower control arms and mounted the rear sensors on the lower link bars towards the pivot point.
Cool a friend told me about some manifold that as all the air lines going into it I thought the e lvl was it ... dnt go pumps ,I'm going York 210 belt driven but that me I like them and you can get them off old Volvos and they last longer if you get them off junk cars
Kinda of lol. I did the pathfinder quarter panel swap years ago, and then needed more room so pie cut them and brought them out a couple inches more then added filler panels.
Why the hell would you put a V8 in it and not a SR20DET... V8 swaps are so played out it ain't even funny. Other than that I think it's a very nice build 👍
Lmao, main reason was cheap. But would have to agree way to heavy and bulky for a minitruck but doesn't matter anyways because the truck got Scrapped. Although an SR swap is pretty cookie cutter if you ask me.
@@MrDeleon9999 safety and motivation were the main reasons. Project was going backwards and I wasn't happy with the work I did at the start so was an easy decision to start a new build. This truck turned into a buisness for which I'll never have regrets scraping it.
Very straight forward video, every body else wants to be and actor and talk about unnecessary things 👍👍👍
Can’t stop watching all of your videos!!!!!
That is just high technology. I like it a lot!!!
thanks for this video, was kicking around the idea of doing a DIY kit of this sort for my project.
That's so bad ass. That whole thing is gonna look so fuckin' dope when it's all done...it does now!
That's badass it makes me want to put bags on mine
That's sick man going to put this on my dodge.
awesome didn't know about the auto level feature really cool👍
thats is soooo fucking DOOPE!!!! like no joke thats bad ass i cant wait to see you finish your truck
That is ridiculously awesome. I want
That auto adjust is so cool!!! I think I might just have to put something like that on my fairlane wagon. :)
+bluehandsvideo Haha yes!!
Nice work bro
Thanks for this video bro. U are inspiring me to go air next year
That's dirty! i want this
Ballin!!
She's gorgeous man
Ill bro,looking good!!
that's freaking awesome man
Yep, Now I gotta get the E-Level...........
hi i have the e level on my van but my question is nothing to do with air its about your chassis protection lets say you you got a new car and the floor pan had a few rust spots showing thru what would you do to rid of the rust and then what would you use to add lasting protection thank you btw cool ride
Sorry I'm not sure try asking some one in the paint and body field.
OH MY GOD JUST HURRY UP AND FINISH!!! the suspense is killing me!!!
ya im in the same boat. have a 88 s10 blazer that i have bagged / boded . and it taking longer then i expected .. take 1 step foreword and 10 back..lol
Sick with it!
I need this for the legacy I'm buying.😅
For a second I thought this was my dads (it wasn't) but my dad had had one that looked exactly like this but it was red and also bagged
Gutted these guy's gone out of business - I have leaking air on my front end and being in UK have trouble finding a service kit ;-(
Someone bought the company not long ago, so theres still hope.
Love it, howd you make your flairs? What is it?
Steel wide body kit I was doing at the time.
Did you do a 5 lug conversion. N what did you used. The this looks amazing. Great job on the build
Yes I had blue hands video machine some toyota hubs for the front to fit over the nissan spindles. And at this time I was running adapters in the back. But most people will use am old yota axle or ford 8.8 axle which has the same 5x114.3 lug pattern.
Was curious, what was the elevel set up you got? They come in various set up packages was curious what exactly did you eat with it and how much did it run you?
+quickhurley445 I got the elevel package with the height sensors. And I couldn't tell you how much I got it. I got it through a friend who is a dealer of them and got me a discounted price.
scrappingpavement oh ok ya I'm an air Ride business as well.. I was curious about which package you got cuz I see Elevel set up but then I see two separate ones without the sensors lol I was confused lol
I like that !
I know you said you were going to scrap the truck but did you end up selling the accuair kit
I kept the accuair system for my new build
Can you send me the link to which system you purchased. I'm trying to do a budget build for mines and trying to figure out what to purchase first@@scrapingpavement
@@MichaelBrown-vo2iu This is an updated version of what i had accuair.com/products/ultimate-air-management-package
What kit is that?!🤩 i need it
Hey man. Got mine for my hardbody just wondering where u mounted the sensors
Depending on your setup I mounted the front sensors on the lower control arms and mounted the rear sensors on the lower link bars towards the pivot point.
Thanks man just wanted to get a reference from you
What struts/bags you using?
Dominator 2500 up front. And dominator 2600 in the back.
scrappingpavement Thanks!
Any videos on how you installed the struts?
I have videos on how to bag trucks which use the same parts
Nice is the e lvl like a air manifold too ?? Or just air management ??
elevel is the brain and the air valves still needs compressors and tank.
Cool a friend told me about some manifold that as all the air lines going into it I thought the e lvl was it ... dnt go pumps ,I'm going York 210 belt driven but that me I like them and you can get them off old Volvos and they last longer if you get them off junk cars
Did you fab those quarter panels up yourself?
Kinda of lol. I did the pathfinder quarter panel swap years ago, and then needed more room so pie cut them and brought them out a couple inches more then added filler panels.
can you lock it out faster than that with that setup?
+baggeddime24 i was running on shop air at 120psi so I would awesome when it's hooked up to the 200 psi compressor it will be a bit faster
what size shop air compressor do you have? 60 gallon?
yes
what is that button which is above the all down button
If I recall right it's the programming button when you setup the accuair.
@@scrapingpavement thanks
Dope smart
Is this pressure based or height based?
Height based with the arm sensors
Why is yours so loud ? my elevel is really quiet.
how can I change it and make it loud when lifting and lowering
+Buck Atkins does yours have silenserors?
yes
just take them out i dont have any on mine
where are they located dude ? if I have any
Is this universal for any car ???
It requires some fab work to mount the sensors. But it is a universal air management system.
@@scrapingpavement thank you bro for the quick reply I was hesitant to order
sick
My right corner won’t go up
woow
bad ass!
You know what it my be?
Hi every one ))) a like it )))
hey do you have an instagram, i need help with putting my airride system. im gonna be running a little larry (AireJax)
@purplecrush_andthangs
Where can i buu that seystem?
belo projeto
Why the hell would you put a V8 in it and not a SR20DET... V8 swaps are so played out it ain't even funny. Other than that I think it's a very nice build 👍
Lmao, main reason was cheap. But would have to agree way to heavy and bulky for a minitruck but doesn't matter anyways because the truck got Scrapped. Although an SR swap is pretty cookie cutter if you ask me.
@@scrapingpavementThat was a Epic build. May I ask why it was scraped?
@@MrDeleon9999 safety and motivation were the main reasons. Project was going backwards and I wasn't happy with the work I did at the start so was an easy decision to start a new build. This truck turned into a buisness for which I'll never have regrets scraping it.
Thats horrible, all the air noise. Better sticking with hydraulics.
Lol personal preference brother. What ever floats your boat.
😢😔
Not worth the time
Cool
Accuair's controller is ugly AF... looks genetic & tacky... They should share controllers with AirLift