real talk bro truth be told dawg right now I'm driving a 95 g20 . chevy van . 600$ bucks offer up. he had messed up and put 500 $ he meant to put 800$ so 600$.it went big time blessing . amen. only the.driver seat.exists.from the original seating it's now my mobile man cave.command center with rather office chair flatscreen file cabinet 2000 watt solar. panel .to a 12volt big rig battery to a 1500 power inverter powering my amps lights.power tools etc. i love it.
there is another youtuber have c4 corvette project he said "you have to be creative, patient and perseverance " I took that lessons to heart I have c4 crossfire corvette that I purchase car doesnt start I go it started and more fixing to come. I have no idea about any cars but driving them but I got it running I research on google, youtube and from talking to people who owns similar year car. And now I'm familiar with the car this kind of video is really helpful thank you for posting.
Consider adding another switch for the front suspension. Getting the front to stay even after lifting is hard. Without a swaybar it is almost impossible.
...that's an interesting and informative video on air suspension system. I once owned a 1990 Lincoln Continental, that had a built in air suspension system from the factory. I got it from a friend in 2005. The air pressure would regularly fail, due to an air leak in the system and every morning I would find the rear end sitting on the floor, because the airbag would lose air overnight. I never could figure it out, I just figured the system was getting old. One day while the car was jacked up, the air compressor proceeded to air up the system, the rear left wheel airbag blew up, while the car was on jack stands. Don't ask me why. 😂 The system was on it's last leg, when I got the car, it was free anyway. 😂 Anyway, I eventually replaced all the struts/airbag units from the factory, with coil struts from a Ford Taurus, that I obtained from a salvage yard. The whole swap cost me about $40. I also pulled out the air compressor, and gave it all away. FYI, the rear coils on those struts, from a Taurus, aren't strong enough to carry a Continental, you need stiffer ones, but they worked up until 2009. After looking at this video, I'm wondering if I could have fixed the airbag problem on the Continental with Check valves, which would have prevented any one single airbag from releasing all the air, that was stored in the airlines to each pair of bags. I eventually stopped driving that Continental in 2009-2010, I literally abandoned it, at an empty parking lot. 😂
There's a switch in the trunk to cut the air suspension off and some were on the passenger foot well. I've repaired in the past a million of those systems. Back in the day the Stealership(Dealership) would charge $800 per side to fix it when all it be is an O-ring leaking air on the airline. A spray bottle filled with water and dishwashing liquid was my friend in finding the leak EASILY.
I've seen people using their AC compressor or their vehicle to eliminate the air compressor sound. It's pretty dope and it airs up pretty quick. They even makes the car hop
Bags should NEVER be connected in parallel, worst case scenario being on the same axle. As LNM Performance correctly pointed out, when turning, the center of gravity will tend to keep going straight, thus creating the natural rolling effect on the car. Rolling 'toward' the outer wheels will compress the outer curve bags, which will send the air exactly to the inner curve bags, therefore AMPLIFYING the roll !! This is a recipe for DISASTER. In the least, will bring the OPPOSITE of safety conditions in cornering. Please consider this with much care, even more so, with the notorious view numbers.. Thank you.
Take a look at this article, credits included : " Two-Way Versus Four-Way When air suspension was first introduced to hot rodders in the mid-'90s, a two-way control system was the standard method of inflating and deflating the suspension. In other words, both air springs on each axle were hooked together. This kept things simple, requiring only one control valve per axle. However, it quickly became apparent that during cornering, the outside (or loaded) air spring tried to transfer air to the inside (unloaded) spring, magnifying body-roll issues. Sometimes the problem can be minimized on a light car by installing big antisway bars, but nowadays, nearly everyone uses a four-way system, which plumbs and controls each airbag separately. Although this requires an individual control valve and air line for each spring, it cures all air-transfer problems, plus it allows precise control over vehicle ride height to compensate for varying weight, suspension bind, or alignment changes. " www.hotrod.com/articles/hrdp-0701-air-suspension/
Hey bro I’m really trying to do this also. I also got an Altima a 2010 coupe you think I can dm you or something and could you please tell me exactly what process you did
That relay is what causes compressor to fail. It's really too small. Use a PAC solenoid. Yes, it's more money, but it will save you hours of head scratching as to why compressors keep burning up. Or why relays are melting. I learned this trick years ago. And I've never lost another compressor ever since then. No matter how small or cheap the compressor may be.
Ok I have to ask man what is it you could say in the video? You were talking about the air compressor and cut out and just said "No I don't wanna say that" lol the suspense is killing me. Thanks for sharing this I love bagged trucks and a classic bagged pickup is on my project list for the future so information like this is very valuable to me.
I would suggest rethinking your valve setup...its not that much more to add a few valves and have control. My setup i had 8 smc 3/8 valves. 4 fill and 4 dumps. You can wire them to have 2 lift the from at the same time and rear etc. I had issues with tying in one line to 2 bags...my truck rode like crap. The extra valves dramatically improved ride quality.
Hey WideBand im new to the channel and you might of answered this before but how do I know what weight these bags can handle. Specifically if I was to use them to lift a pickuptruck or something? is there a rating or math i have to do before hand?
Optd for the bigger compressor. I bought this one and on a half gallon tank/train horn set up it burnt up in 6 months. Called airmaxx and they said no rebuild kit. Bought the bigger compressor. No problems 1 year in
not sure if you’re still answering comments on this video, but do you have a different link for the bag fittings? the link doesn’t work now and i’d love to find those. have everything else saved
Hey guys, I'm installing bag riders manual management. The paddle valves have 1 and 2 numbered behind them does it make a difference where I put the bag lines ? Anything helps thanks
I am curious to see how long the cheeper stuff holds up. I have always been picky with what air ride parts I used. If I have something go wrong things get complicated really quick given how low I build my stuff. I am still watching the video at the time I am typing this lol
So far it's been fine my biggest complaint has been the cheap air line not locking in to the ptc fittings the best and leaking here and there. Bags are fine, compressor is fine.
@@wideband hey there, I saw your video. I have a toyota camry 2015. I live in New York City. Is this system compatible with my car? Is the brand of the whole system called airmaxx?
That car has struts in the front so you will either need an air strut or a double sleeved bag, I'm not sure what the rear looks like, maybe cups could work there. The prebuilt kit I found for that car was an Air Lift Performance kit that was 3700-4000 US Dollars.
Only need two paddle valves, the front two bags get Teed into each other as well as the rear, one switch airs up both fronts and the other switch will air up both back bags.
couldn't i just hook up presta-valves in all four corners and just fill/deflate manually? i was thinking about having presta valves in all four corners and jut having a portable compressor. trying to avoid to have to make room for tank,compressor, etc.
You mean Schrader valves. Presto valves are for narrow bicycle rims like on road bikes. Yes they are easier to put air in, but likewise you need to keep them tight. Kind of a specialty for an auto application, and besides, the air chuck for schrader valves are everywhere, at every gas station, garage, etc. Or, go your own way.,..
@@wideband Okay thanks. Im thinking if I could manage to bag my 1991 Mitsubishi Galant. But its difficult to find the parts for less than thousands of dollars where I live. And I need help from someone to make the cylinders to make it fit my car.
I've seen many people selling it used, I don't know is there a major problem with these kind of hydraulic And most of them in my country are coming from airslamit. Com are they good or after sometime it's creating a problem and youll be stranded 😅😅😅
None of us has that kind of money, seeing videos like this makes me glad
real talk bro truth be told dawg right now I'm driving a 95 g20 . chevy van . 600$ bucks offer up. he had messed up and put 500 $ he meant to put 800$ so 600$.it went big time blessing . amen. only the.driver seat.exists.from the original seating it's now my mobile man cave.command center with rather office chair flatscreen file cabinet 2000 watt solar. panel .to a 12volt big rig battery to a 1500 power inverter powering my amps lights.power tools etc. i love it.
there is another youtuber have c4 corvette project he said "you have to be creative, patient and perseverance " I took that lessons to heart I have c4 crossfire corvette that I purchase car doesnt start I go it started and more fixing to come. I have no idea about any cars but driving them but I got it running I research on google, youtube and from talking to people who owns similar year car. And now I'm familiar with the car this kind of video is really helpful thank you for posting.
Lol bro like bags are like 2k if you built them yourself
@@KoopZokuGarage ppp]]]pppp]]]p]ppppp]ppppp
@@KoopZokuGarage you can build a quality kit for your self and keep it @ 2k
This video for cheapos and diy`ers like myself is pure gold. Huge Thanks
Wow that's cheap! Even the most bare bones systems are usually 2-3X that. This is really cool. Such a perfect car for air suspension, hahaha.
Dude it looks so good on the ground I can't wait for you to see it.
Excellent Video - no product placement, clear concepts - real world modding.
Consider adding another switch for the front suspension. Getting the front to stay even after lifting is hard. Without a swaybar it is almost impossible.
Ended up doing 4 switches, one for each corner.
Damn man, thanks for these videos, great stuff! I had no idea it was possible to do it so cheap. Makes bagging my own W126 an actual possibility.
...that's an interesting and informative video on air suspension system. I once owned a 1990 Lincoln Continental, that had a built in air suspension system from the factory. I got it from a friend in 2005. The air pressure would regularly fail, due to an air leak in the system and every morning I would find the rear end sitting on the floor, because the airbag would lose air overnight. I never could figure it out, I just figured the system was getting old. One day while the car was jacked up, the air compressor proceeded to air up the system, the rear left wheel airbag blew up, while the car was on jack stands. Don't ask me why. 😂 The system was on it's last leg, when I got the car, it was free anyway. 😂
Anyway, I eventually replaced all the struts/airbag units from the factory, with coil struts from a Ford Taurus, that I obtained from a salvage yard. The whole swap cost me about $40. I also pulled out the air compressor, and gave it all away. FYI, the rear coils on those struts, from a Taurus, aren't strong enough to carry a Continental, you need stiffer ones, but they worked up until 2009.
After looking at this video, I'm wondering if I could have fixed the airbag problem on the Continental with Check valves, which would have prevented any one single airbag from releasing all the air, that was stored in the airlines to each pair of bags.
I eventually stopped driving that Continental in 2009-2010, I literally abandoned it, at an empty parking lot. 😂
Youre supposed to turn the air susspension off when you jack em up. Sorry 4 your loss
There's a switch in the trunk to cut the air suspension off and some were on the passenger foot well. I've repaired in the past a million of those systems. Back in the day the Stealership(Dealership) would charge $800 per side to fix it when all it be is an O-ring leaking air on the airline. A spray bottle filled with water and dishwashing liquid was my friend in finding the leak EASILY.
What parking lot👀
I've seen people using their AC compressor or their vehicle to eliminate the air compressor sound. It's pretty dope and it airs up pretty quick. They even makes the car hop
Look forward to the install!
Great content! I'm definitely gonna binge your other videos. I just recently got interested in air suspension.
شكرًا لك 🌹
لأنك قمت بترجمة المحتوى للعربية
تستحق المتابعة يا بطل 🌹
i run all airmaxxx bags on my chevy 3500hd dually and the work great!
I’m bagging my 65 galaxie, thanks for the tour!!!!:)
Don’t run a t when you turn air will go from one bag to the other causing your car to roll
Some people have done it with no issue, I wanna try it and if it feels sketch I'll upgrade to 4 valves and separate lines.
Bags should NEVER be connected in parallel, worst case scenario being on the same axle. As LNM Performance correctly pointed out, when turning, the center of gravity will tend to keep going straight, thus creating the natural rolling effect on the car. Rolling 'toward' the outer wheels will compress the outer curve bags, which will send the air exactly to the inner curve bags, therefore AMPLIFYING the roll !! This is a recipe for DISASTER. In the least, will bring the OPPOSITE of safety conditions in cornering. Please consider this with much care, even more so, with the notorious view numbers.. Thank you.
Take a look at this article, credits included :
" Two-Way Versus Four-Way
When air suspension was first introduced to hot rodders in the mid-'90s, a two-way control system was the standard method of inflating and deflating the suspension. In other words, both air springs on each axle were hooked together. This kept things simple, requiring only one control valve per axle. However, it quickly became apparent that during cornering, the outside (or loaded) air spring tried to transfer air to the inside (unloaded) spring, magnifying body-roll issues. Sometimes the problem can be minimized on a light car by installing big antisway bars, but nowadays, nearly everyone uses a four-way system, which plumbs and controls each airbag separately. Although this requires an individual control valve and air line for each spring, it cures all air-transfer problems, plus it allows precise control over vehicle ride height to compensate for varying weight, suspension bind, or alignment changes. "
www.hotrod.com/articles/hrdp-0701-air-suspension/
@@moronoqg
Semis and semi trailers link all 4 rear bags together, with a proper anti-sway setup it's not an issue
I was going to say the same thing. It's alright for towing, but it's the worst thing for cornering
this is old school! guys paying mad bones but i bagged my altima for less than 600 bucks like this
Did you use the same bags this guy did?
@@bradleyb5360 basically, i had to use strut bags for my use in the front, but the way he used amd style of bags are more affordable too, good quality
What can i use for a 2016 lexus es350?
Hey bro I’m really trying to do this also. I also got an Altima a 2010 coupe you think I can dm you or something and could you please tell me exactly what process you did
@@sebastiandiaz8024 whats ur ig
That relay is what causes compressor to fail. It's really too small. Use a PAC solenoid. Yes, it's more money, but it will save you hours of head scratching as to why compressors keep burning up. Or why relays are melting. I learned this trick years ago. And I've never lost another compressor ever since then. No matter how small or cheap the compressor may be.
Your car is half the weight of mine 😂 amazing video I will have to use heavy duty slam bags
Ngl this video saved my life now and has put a huge idea in my head thank you 🙏🏾
Awesome vid man. I’m getting ready to bag a Honda Odyssey van
That's sick, Hondas are my favorite.
Im working on a del sol myself
Cool bro
why??
@@wideband hey bro can you use these over stock coils on cars
Are you just dumping the air back into the tank? I only saw two ports on your switch.
This is so awesome!!!! “Subscribed!!”
Taking a gamble on a no name pressure vessel.
That's a no for me partner.
Great video, without a bunch of stupid frills!
Such a badass car love me a classic! Keep up the good work i subbed!
Thanks!
Sweet and simple! Love it, and thank you.
Awesome video. Quick question. Will this set up fit in my 1948 dodge car?
Did you do your car I need one for a 55 mercury 2dr Ang suggestion and were did he get the equitment
Ok I have to ask man what is it you could say in the video? You were talking about the air compressor and cut out and just said "No I don't wanna say that" lol the suspense is killing me. Thanks for sharing this I love bagged trucks and a classic bagged pickup is on my project list for the future so information like this is very valuable to me.
I would suggest rethinking your valve setup...its not that much more to add a few valves and have control. My setup i had 8 smc 3/8 valves. 4 fill and 4 dumps. You can wire them to have 2 lift the from at the same time and rear etc. I had issues with tying in one line to 2 bags...my truck rode like crap. The extra valves dramatically improved ride quality.
Yeah I ended up with 4 paddle valves cause it wasn't that much extra work and only 30 bucks more.
I understand doing a budget, but manual valves??
Sweet now need someone to install
Hey WideBand im new to the channel and you might of answered this before but how do I know what weight these bags can handle. Specifically if I was to use them to lift a pickuptruck or something? is there a rating or math i have to do before hand?
Awesome video I’m doing my golf cart and I think I’ll go this route but I want all 4 to go separate thanks for the video
Thank you great simple to the point tutorial. Good luck.
what fitting did you use for the lines to the tank? any valves? i purchaced a kit like this and i had to get valves
Great video!
Please post more to this
Working on install right now, all that's left is powdercoating the cups and running air lines.
Optd for the bigger compressor. I bought this one and on a half gallon tank/train horn set up it burnt up in 6 months. Called airmaxx and they said no rebuild kit. Bought the bigger compressor. No problems 1 year in
And also now running the airmaxx 2600lb bags on the back for towing
Good to know, I wanna go bigger on the compressor for sure. It takes a long time to fill this tank.
How heavy is the car? I have a smart fortwo 750kg, i would surely be able to use smaller tank?
Can use the portable 12v tire pump for suspension. A 10th of the price.. easy to mount it underneath
😅yeah go for it.. you'll be aired up in no time
I am building a lowrider bagged 95' Chevy s10 and this would be perfect for it as I am on a budget
Hows its holding up?
not sure if you’re still answering comments on this video, but do you have a different link for the bag fittings? the link doesn’t work now and i’d love to find those. have everything else saved
Do you know what kind a airbags for my 1950 Buick I can put in
I'm sorry if you covered it but what fittings did you use for the tank air lines to the bags?
thanks for making it simple
Hey man love your videos I’m motivated to do the same thing to my 2016 c450amg but I’m not sure what will fit
Where did you get this set up from?
Links in description
I have 2 Airmaxx 580s running to 180 psi to a 12 gallon tank
Hey guys, I'm installing bag riders manual management. The paddle valves have 1 and 2 numbered behind them does it make a difference where I put the bag lines ? Anything helps thanks
what paddle valve do you recomend to go up & Down Faster? Thanks Currently Buying Almost Everything On This List!!
its not the paddle valves that determine speed, its the air line. 1/4 line is small so its like medium speed.
So I can put this kit on any car ? I have a 1991 camaro rs you think these bags will do the job?
Have these compressors held up? Any problems with them
I havent had an issue yet and I have definitely ran it a lot, a lot of back to back tank fills to 180 psi.
Wouldn't go with the 1/4 inche line mines 1
1/2 in the front due to engine weight and 3/8 in the rear
I am curious to see how long the cheeper stuff holds up. I have always been picky with what air ride parts I used. If I have something go wrong things get complicated really quick given how low I build my stuff. I am still watching the video at the time I am typing this lol
So far it's been fine my biggest complaint has been the cheap air line not locking in to the ptc fittings the best and leaking here and there. Bags are fine, compressor is fine.
@@wideband hey there, I saw your video. I have a toyota camry 2015. I live in New York City. Is this system compatible with my car? Is the brand of the whole system called airmaxx?
@@RWarrior777 nah you probably have a strut type suspension these bags don't work with that
@@wideband thanks, what type of strut suspension can you recommend for me. That can give me that very comfortable non bumpy ride.?
@@wideband bags and compresser still holding??
If I wanted to buy pre built cups do they have them for a 2003 volvon s40
That car has struts in the front so you will either need an air strut or a double sleeved bag, I'm not sure what the rear looks like, maybe cups could work there. The prebuilt kit I found for that car was an Air Lift Performance kit that was 3700-4000 US Dollars.
What’s a good kit for a 2001 chevy 1500 ext cab ?
There’s some parts and links in your description that aren’t available anymore. Wish they just sold a fkn package
How do I find out what size of bags I need?
hi how does it release the air from the bellows? Thx
Now will this bag system fit any vehicle or is it specifically for your vehicle?
Whenever you bag, youre doing it custom either way unless you spend like 10grand on a 4link prebuilt full chassis
Used truck towing bags on my car and they’re a quarter the price
And stronger too
You got a link to the ones you got?
i rather go for the airlift p3. price is high but so is the quality
Thinking of bagging my scooter. This gonna fit?
Wow you said yea j your Honda Fit, I’m bagging my fit will this exact setup work for $500-550?
And what about my wheel wells, I heard I might need a sway bar too l, lmk if you had any maintenance issues with em
The link for t fittings took me to site that listed t fittings at $ 2,000.00. Bit of inflation issue. Lol
Where's did you get the plugs for the tank?
??
Looks like they are 1/2" plugs. Just search " 1/2" NPT countersunk plug" on Amazon or eBay and you should be able to find something similar.
You can get those at any hardware store.
Hi 👋 sir Tyler I love it, you did benz. It possible can fit my 2006 benz c230 sports kompressor.thank you sharing your video vlogg. 👌👍
Where are your air valves to operate the air system? Usually its 4 valves to operate both front and both rear for an Front/back setup.
Only need two paddle valves, the front two bags get Teed into each other as well as the rear, one switch airs up both fronts and the other switch will air up both back bags.
Please make video when you installing in your car this air ride suspension please ❤️❤️❤️❤️
Do you need brackets if you have coil overs?
You need a different type of bag if you have coilovers and no brackets.
Where did I can install my vehicle in India
What do you call that switch?
Would this work for a lincon towncar?
Following
couldn't i just hook up presta-valves in all four corners and just fill/deflate manually? i was thinking about having presta valves in all four corners and jut having a portable compressor. trying to avoid to have to make room for tank,compressor, etc.
You mean Schrader valves. Presto valves are for narrow bicycle rims like on road bikes. Yes they are easier to put air in, but likewise you need to keep them tight. Kind of a specialty for an auto application, and besides, the air chuck for schrader valves are everywhere, at every gas station, garage, etc. Or, go your own way.,..
@@andrewhigdon8346 right. That’s what I meant. Thank you.
Link to the extra plates?
Will this work for a ford fusion 2018
How the hell is he supposed to know?
Even if it won't mount up properly you can always modify it to work
How much full kit
Did the cutter come with the line?
I went through my purchase history and I'm positive it did, but the listings have been updated and it seems they are no longer offering it.
Did I miss it how much all together ?
He said in the beginning of the video all for under $600.
This is so cool. How much does the compressor draw? Im guessing not too much, as the wires are not too big. Compared to amplifier Wire
Dont know how much it draws but im using 6 gauge wire and a 30 amp fuse.
@@wideband Okay thanks. Im thinking if I could manage to bag my 1991 Mitsubishi Galant. But its difficult to find the parts for less than thousands of dollars where I live. And I need help from someone to make the cylinders to make it fit my car.
22 amps is max draw
Doing any project no matter how much $$ you have or willing to put. Make it upgradeable and plan for the worst. Accidents and breakage.
Compressor????? I have the same think for filling my mike tires i paid 10$$$$$
Will i need to get the cups if I’m going bag over coils set up ?
No
Would this work in a crown vic? 03 plus. Thanks.
You can make anything work if you want it bad enough. Check the measurements and holes and it may tell you.
Could this go on a truck ?
Nice n cheap Made in China’s stuff... Good luck on it’s durability!!
Everything is made in China now, it's not 1980 anymore grandpa
Where you located?
Where did you buy all of this and what do you search for
I want know 😫 too I need a kit for my 1970 f100
please share purchage link
How much durable is this suspension?
Yea that's a good question
I've seen many people selling it used, I don't know is there a major problem with these kind of hydraulic
And most of them in my country are coming from airslamit. Com are they good or after sometime it's creating a problem and youll be stranded 😅😅😅
Oml I'm bagging my w123 thank you for the help
Where does air go when you air down?
The atmosphere
Air releases from behind switch
those bag extensions are way overkill, those would easily support a freighter
Is that safe for car OFFROAD
Is there a cup kit already made for the car? And if not is there anyone that can custom make the cup kit?
I am not aware of a cup kit specifically for a w126. There is a full kit from dolud but its pricey and I believe made to order.
Will this set up work on a Saturn Ion 2 4dr Sedan?
Why would you do it on a shitbox
@@CJ.2SS would you rather he bag your mom?
@@guywilliams828 I would say your mom but that would mean both are bagged shitboxes
could i use that same set up for my 2017 chevy impala would like to know if you could help out in anyway
Cool man😎
You forgot to install a leveling valve