Ethan. I think that the "Toys" are really bringing out the Super Engineer in you. I think when you see the mini vehicles, it gets your mind working, and you see what is necessary to create the most awesome and powerful "Karts". You are advancing at an exponential rate. I am impressed as, I think, most of your subscribers are also. Both of you are "Monsters" on UA-cam! Do you ever sleep? ;-) Thank You guys for working so hard and pushing the limits to keep us entertained and safe. Keep the rubber side down.
John Paulk from someone who doesn’t really know what they are talking about, weight basically increases as it rotates quicker. Like if you have a unbalanced wheel on a car, could be a minuscule difference but it vibrates your whole car.
@@johnpaulk994 rotating weight would be the total weight of all the driveshaft components (everything that rotates while the vehicle is moving). It's important because more rotating weight will have higher intertia, meaning the motor has to work harder to get it all moving and keep it moving. Plus, once it's moving, it is harder to slow down.
Oh God it's amazing I adore the front suspension and work on the chassis. It's very rare to find someone who works at this level of quality. I really liked it
I would have expected you to round off the two verticals plates at the centre of the front of the car as that is where you hit the ground first when the front suspension is compressed.
so many ppl are following your lead and building similar vehicles! they are all singing your praises and WE WILL ALL REMEMBER WHO WERE THE PIONEERS!! that Moto Mule is a character! lol it such a great time to be a you tube watcher!! DO IT FOR DALE!!
Luv when you guys put a new video out there! A lot of these things i allready built and tried, but being old i really cant find the energy to build anymore. Then again, looking at you guys is just as fun. And i see new, and better, solutions on some of my old problems.. Keep grinding!
Boys! I see many getting their favorites on youtube, realized long ago that I like your art, you are really inspiring! keep the glow up! this content is the best! :D
Maybe hold off on painting the steering wheel until after the build. Like you said the little bit of red accents might work. Going overkill on frame is a good thing. When ever something breaks its not because it was too strong. The engine will put out some torque. And you might just push it to the edge.
I've been a fan since Ethan was in The Woodsmen (or whichever show... it's been a while hasn't it?) I recently took a job with my friend's stepdad. Worked for 3 and a half weeks. Haven't got paid. Got to go with him to watch him pick up a jeep for $400 and still haven't been paid--then he runs out of gas (I told him to keep a gas can w/ him and he said it wouldn't happen again..) and made us walk like 10 miles to get gas for him. No thank you.. No sorry. That's the tip of the iceberg. This video upload today made my month a lot better. I'm so thankful for you guys seriously. You love what you do and you do what you love. Never gonna stop being a fan.
You guys should pick your favorite Mario Kart (or other cart racer game cart) and try to build an exact replica! It would be so cool to see a GHPC version of Mario's actual cart, or the awesome 6 wheel Bowser kart! Just an idea for a future project if you gets ever run out of ideas.. lol
That Pirahna ironworking tool is amazing! I just had a look online and there's a pipe notching attachment available. Could be handy? Love the work, lads. Keep it up!
What's up Grind hard! Love the way your build's evolve as knowledge, experience and means build up over time 👍😀👍 A note on your steering angle.. Think you would want a bit more angle when you get sliding around in that thing. It's easier to control on the edge with a bit of margin.. Awesome work guys!! Keep it up and there's no limit to what you will achieve 😀 Best regards from Jonny Bech //Sweden.
Yet all of your builds are awesome really well done really well thought out but this one just seems exquisite I’d say yellow for the steering wheel And Skid plate would help to
I would just paint the steering wheel black for a cleaner look.
For the next build, why not take the design from your favorite Mario Kart and make a build based on that!! Love the work guys!
William Stilton - i’m-uh Wario. i’m-uh gonna win
Was just about to suggest the same thing 😁
Ethan. I think that the "Toys" are really bringing out the Super Engineer in you. I think when you see the mini vehicles, it gets your mind working, and you see what is necessary to create the most awesome and powerful "Karts". You are advancing at an exponential rate. I am impressed as, I think, most of your subscribers are also. Both of you are "Monsters" on UA-cam! Do you ever sleep? ;-)
Thank You guys for working so hard and pushing the limits to keep us entertained and safe. Keep the rubber side down.
I can't wait to see this bad boy ripping around!
ME TOO
I vote on redoing the wheel yellow!
I think it's a good call
agreed, yellow
5 LBS you saved in rotating weight. Thats huge for something this size.
Big time
What do you mean rotating weight?
John Paulk from someone who doesn’t really know what they are talking about, weight basically increases as it rotates quicker. Like if you have a unbalanced wheel on a car, could be a minuscule difference but it vibrates your whole car.
@@johnpaulk994 Tape a pop bottle to your driveshaft and find out
@@johnpaulk994 rotating weight would be the total weight of all the driveshaft components (everything that rotates while the vehicle is moving). It's important because more rotating weight will have higher intertia, meaning the motor has to work harder to get it all moving and keep it moving. Plus, once it's moving, it is harder to slow down.
You guys have definitely upped your game not satisfied with mediocre builds keep it up guys its inspiring
Oh God it's amazing I adore the front suspension and work on the chassis. It's very rare to find someone who works at this level of quality. I really liked it
This is gonna be a GOOD ONE!!!
Cant wait to see it run!
I like your impaling shaft, I mean steering wheel
I can't wait till its done! You guys are my new favourite channel on youtube, editing is always on point
One of the best looking, tightest builds GHP has done to date- and has set off a bunch of other YT content makers to play with- AWESOME, dudes!
Paint the Steering wheel yellow
Powder coat perhaps
Hi I'm from East borneo sir, and I always watch your videos 👐👐
I would have expected you to round off the two verticals plates at the centre of the front of the car as that is where you hit the ground first when the front suspension is compressed.
Im sure they will. This is still a very rough draft for now
Then weld a skid plate ....
This channel is great, I love watching Doogie Howser build stuff.
so many ppl are following your lead and building similar vehicles! they are all singing your praises and WE WILL ALL REMEMBER WHO WERE THE PIONEERS!! that Moto Mule is a character! lol it such a great time to be a you tube watcher!! DO IT FOR DALE!!
Yalls builds get better n better! Im gettin excited to see it go on its own power. Keep up the great work guys!
Yellow for sure, coming along real nice.
I can see a front skid plate being required :)
Keep the wheel red! Awesome build guys!!!
Man that frame is sick! incredible work guys !
Your other builds are amazing, but this is turning out to be next-level. Can't wait to see how it turns out.
you guys should expand and renovate your garage(if you can)I think that would be pretty dope
Luv when you guys put a new video out there! A lot of these things i allready built and tried, but being old i really cant find the energy to build anymore. Then again, looking at you guys is just as fun. And i see new, and better, solutions on some of my old problems.. Keep grinding!
This thing honestly a piece of art kind of a shame to cover it with the Camaro body🤦🏽♂️
it actually looks cooler just with the tube frame
Looks better than the mustang lol
@@Josh-lz3xo noone said something about a mustang but yeah
@@alarastaff they have a mustang too
What if they did a clear Camaro body copy? 😈
Boys! I see many getting their favorites on youtube, realized long ago that I like your art, you are really inspiring! keep the glow up! this content is the best! :D
the chassis it self looks so good....cant wait for the full body
Maybe hold off on painting the steering wheel until after the build. Like you said the little bit of red accents might work.
Going overkill on frame is a good thing. When ever something breaks its not because it was too strong. The engine will put out some torque. And you might just push it to the edge.
Always appreciate more footage of those awesome dogs!!! 🤗
short and sweet vid, I miss the long full on builds.. gotta do a longer vid on this guy
Wait till the build is nearly complete to mess with the steering wheel's color.
DANG I'VE BEEN WATCHING THIS CHANNEL FOR ABOUT A YEAR AND THIS CHANNEL IS SO UNDERRATED. LIKE THIS OF YOU WANT GRINDHARD TO BE POPULAR.
brilliant content, awesome engineering, easy going music, EPIC drone shots and all round polished production.....love your work guys,
Your putting out the beat work on yt hands down, consistently
I‘ m so excited when you drive this thing offroad👍🏻 Great work- as usual!!!
love coming home from a weekend out of town to a new grind hard video
That looks AWESOME!!!
Best builders on UA-cam by far!
I can't wait to see that crazy Camaro cart finished!
Can’t wait to see it running
Great video and fabrication, thanks guys!
The content just keeps getting better and better. Great work
Really like that you don't hide it when you get things wrong, been interesting watching your skill set develop and improve, well done.
Thx to the people who sold his daughter's lil mustang your channel going so crazy man lot of r&d,learning and other thing 👌👌
Thanks!
That thing is a work of Art
Awesome build! Can't wait for the nxt episode
That thing is turning out so nice. Looks like you'll be building a front skid plate of some kind. Awesome job guys👍
Its a beautiful frame job. I agree that is almost more beatifull without the body!
Would be cool for the next build to make an awd kart using atv parts. These build projects are so fun to watch. Keep up the good work
Looks sic guys nice work can’t wait, side note love the music.
red looks great wow what an awesome machine
Awesome build guys keep up the great work!
You guys should try adding gussets it would look great!!
Btw man. Your craftmenship is.....fun to watch!!!
I've been a fan since Ethan was in The Woodsmen (or whichever show... it's been a while hasn't it?) I recently took a job with my friend's stepdad. Worked for 3 and a half weeks. Haven't got paid. Got to go with him to watch him pick up a jeep for $400 and still haven't been paid--then he runs out of gas (I told him to keep a gas can w/ him and he said it wouldn't happen again..) and made us walk like 10 miles to get gas for him. No thank you.. No sorry. That's the tip of the iceberg. This video upload today made my month a lot better. I'm so thankful for you guys seriously. You love what you do and you do what you love. Never gonna stop being a fan.
the beats in these videos are fire keep it up.
Back at it again with a mad dope review 🤘
Finally Been waiting for this!! From Australia!
WOW, You guys are getting seriously good at this ! Totally dig your content all the time.
Keep them red looks great guys
This thing is awesome, can't wait !!
You guys should pick your favorite Mario Kart (or other cart racer game cart) and try to build an exact replica! It would be so cool to see a GHPC version of Mario's actual cart, or the awesome 6 wheel Bowser kart!
Just an idea for a future project if you gets ever run out of ideas.. lol
That Pirahna ironworking tool is amazing! I just had a look online and there's a pipe notching attachment available. Could be handy?
Love the work, lads. Keep it up!
What's up Grind hard!
Love the way your build's evolve as knowledge, experience and means build up over time 👍😀👍
A note on your steering angle.. Think you would want a bit more angle when you get sliding around in that thing. It's easier to control on the edge with a bit of margin..
Awesome work guys!! Keep it up and there's no limit to what you will achieve 😀
Best regards from Jonny Bech
//Sweden.
Bad ass guys. Might wanna cut those front corners off of your engine mounts though, and then weld over with a plate, like a skid plate.
I’d love to see yellow accents on the steering wheel, with a 1/2” yellow orienting stripe at the 12 o’clock position. Keep doing what you do, dudes!
Nice one, the chassis is lookin clean. keep up the good work
I don’t think there’s enough clearance in the front end
I saw the same, the plates for sure will be cut or grinded during the fine tuning ;)
Yellow on the steering wheel for sure.
I want that wheel on my boat!
I love all these sweet tables and carts you guys have decided to build lately for all the tools so they no longer have to be operated on the floor
Great video Guys😊😊. That thing is gonna smoke the track 😝😝
Dark chrome wheels and white frame
would look nice
You put a lot of work into that you guys put a lot of work into all your projects very nice
I'm excited to see this one go.
looks so good without body !!
Your fabrication skills are really impressive!
I can't wait to see it go.
looks totally killer
Man, Ethan is a metal Wizard. Is there nothing he can't Fab? I wish I had the1/2 the talent he has forgotten along the way. Thanks From Vermont.
That's a nice looking table.
looking good guys!
Yellow for sure.
That's gonna be fun!
AWESOME fabricator in every part guys🔧👌🎥🏁
I like it. I like it a lot. You are the fabricators fabricator.
This thing looks so neat!😍 Amazing video!
cooL .. so cooL the chasis
power wheels has entered the chat* nice job on it so far. making some great progress!!
Looking forward to see this drive :D cool build!
That's one beautiful property you have there.
Can't wait to see this thing rip
Great proportions cartoon like
That trellis frame though 🤤
Yet all of your builds are awesome really well done really well thought out but this one just seems exquisite I’d say yellow for the steering wheel And Skid plate would help to
Excellent!👍
great project, great videos!
Thumbs up for Bjorn
Love your videos keep it up
You guys need to race all them on the new track