Can we please just take a moment to appreciate Edwin's cinematography. There are few channels that put this much effort into every upload. I doubt most people understand how long it takes to setup every shot. The beauty's, pans, push in's, time lapse's, the MOVING time lapses, slow mo, the action shots etc etc... And then add audio, multiple angles and editing. I just really appreciate this channel. Thank you guys. Ethan gets down in the shop too. Fab god.
I am a Spokane lifer, work at a machine shop in CDA, and appreciate the hell out of your "N ID" ingenuity! I just bought a 6V for my 2 yr old grandson that has this same Camaro body and couldn't resist watching this build. BRAVO!! What a badass toy!
When you have the "toys" and the engineering mindset amazing things come together. You Ethan are Awesome. Don't think there's anything you can't figure out..well done.
Good show! You guys are the best! I get annoyed easy but yet i have not been annoyed watching your show. I am very critical and very picky and i cant seem to find anything to dislike on your show! Keep up the good work. May God keep blessing you all.
@Grind Hard Plumbing Co. Put the tap in the Chuck in the tailstock, leave the tailstock unclamped from the lathe, put it in it's lowest gear and feed the tap in. Reverse the lathe to pull it out. Simple perfect tap every time.👍🏻
Theres needs to be a race league for these kinds of carts. I'd love to see a huge collab across all the go power sports sponsored channels and a final Mario kart style race!
There needs to be a company that makes these super karts or whatever you want to call them first for folks like myself that have the talent to drive it but fall short on the talent needed to build them. Otherwise, yeah I agree that there needs to be an official sanctioned racing league for badass mini car go kart things
I have no idea why this old video was recommended, but thanks for adding the captions. I can hear just fine, but I prefer to keep the volume fairly low. So, I keep CC enabled.
Really cool I just wish you had done this to the Odyssey So you can say “ we turned a snowmobile into a go cart that we turned into a snowmobile”...sounded funny to me anyways 🤷🏼♂️
A trick i learned for helping keep the tap concentric was to use the flat face of drill chuck on the tail stock to push against the back side of the tap wrench. great video as always!
The guys at Cars and Cameras, John and Isaac, have never tried anything like this, you are very inventive! You need a sponsor though, I like your ideas and the low-buck ingenuity, I'm sure even more could be done with more money to play with. Nice!
I really appreciate how you guys held out on the video until everything was filmed to be put together correctly. Other youtubers need to learn this great technique. With that being said you two do an amazing job together and make very high quality content.
The amount of fun you guys have is just unfair. I'm not sure I even know what real fun is and you guys are over there having a blast in every video. I need to make some life changes.
That thing is so cool y’all have inspired me to build one of these myself i have a taotao 50cc quad and a bronco powerwheels so now im making one for me and the kids so thank you for the inspiration guys
That looked bad ass! I guess the slow motion made it look a lot cooler than it really was but it still looked like a lot fun. I knew he was gonna break it lol. The whole time I was like don't break don't break, so everyone else could play with it, next scene was mangled parts... Looking forward to senderella on tracks and skiis! Awesome stuff guys! You never disappoint! Glad you guys have been able to keep the fun going! I could be jealous but am just happy people can make a living building complex toys and showing them off these days!
They tracks doing well considering the power in that thing! I looked at these on the bay and didn't think they would handle even a 150cc I was wrong tidy as build👍
Drone Tip: Put some 'Conformal Coating' on the electronics of it so if you crash in the snow the heat won't melt it and fry the FC, esc's, VTX etc.. don't worry about the motors & don't get any in usb connections or on any buttons. ..And don't run your batteries so low!! lol, not good for them, they won't last. Good work tho! Stoked on everything you guys do and pumped you got a racing drone! I've been flying them for years and with your filming skills you'll be able to get shots 'regular' drones could never get.
I have the same Atlas lathe, there is an indexer under the headstock cover! There's 60 little holes on the ring closest to the Chuck, and a pin that will lock it in place. Much more accurate and less math!
Ok video is a year old but i am so glad i crossed up with it. I was just looking at these same tracks for a old mower. But now i know they are too small. Great job making splines to make these work. Cool car. Keep up good work.
Those splines should hold no problem. I had to modify a chevy dana 44 drivers side axle shaft for an 78 f150 I had. Thought they had the same spline count they were cut different..an hour or so with a dremel too and those splines fit my spider gear perfect, held up to getting beat on 36s too..keep up the awesome work!!!
www.alibaba.com/product-detail/Go-Kart-Karting-UTV-Buggy-Quad_62428272562.html?spm=a2700.wholesale.deiletai6.19.2fe3164ahvEMZC Lots of similar, with or without swing arms, etc. about $350 delivered.
these are cool, belt tracks. Is made for all sizes, pick up ATVs and all vehicles. Disassembling the original car wheels, and assembling this is as easy as spare wheels. the invention is from Sweden, ski-doo snowmobiles are the ones who came up with this idea. these kits are meant for snow, sand (desert safaris, driving up mountains in difficult terrain are very cost-effective, but with simple and powerful equipment, they can be made at home in the workshop. good luck with your projects, I am interested in following you
You guys are the Marines of Fab work....get the job done with what's at hand.....I love it. Happy New year bro's , I am excited to see what 2020 has for us. The year of perfect vision !!!
What alot of you came here for starts at 18:09.. thank me later.. an before some of you say "I came here to watch the whole build, etc"... some of us didnt.. nothing wrong in wanting to see what we came for an not watch the entire video.. hope everyone reading this has an extraordinary day!
To get the ski's to bite better we use angle iron for the skid plate on the runners because they bite the ground better for turning. (I live in Upper Michigan)
@@blazepedigo9994 those tracks are designed to act like scoops I've personally used one of the Honda snowblowers they were originally designed for yes they are backwards but who knows maybe for this application backwards is better like how running tractor tires points forward digs and pushes the mud out while running them backwards draws in resulting in better floatation
You guys are awesome, the projects you come up with just makes my head spin. You should check into having a race with different categories of machines and show of all kinds of creations. I know there is a lot of guys out there who are into this hobby. You would be surprised.
Cant imagine what you guys could do with some serious funding. Make me wish i was a millionere, just the idea of letting you guys loose in a workshop with infinitive means of building whatever you wanted.. That would be awesome!
John Josephson we use a gear hob on a live tool CNC lathe. It allows a lathe to do mill work. You can turn diameters and then mill flats, drill side holes or cut gear teeth. There are many other ways to cut gears but this is the how we do it.
I"m a mechanical designer and spent about a month this past winter designing tracks to fit my son's power wheel jeep because I couldn't find anything already made for it. Fun little project tbh. Just need to do a motor upgrade to 24V so it has more torque without losing so much speed.
Hella creative with quality work. Those axle spline adapters could help out a lot on the 4WD Jeep. Also an extra set to swap out wheels for the Camaro. Those adapters can go a long way👍
In the north of China (like Harbin), you can rent small ATVs for a 10 minute ride on any frozen lake or river. People love these kind of activities on week-ends during the New Year festivals. It makes sense that they build these tracks for go-karts and small ATVs
Can we please just take a moment to appreciate Edwin's cinematography. There are few channels that put this much effort into every upload. I doubt most people understand how long it takes to setup every shot. The beauty's, pans, push in's, time lapse's, the MOVING time lapses, slow mo, the action shots etc etc... And then add audio, multiple angles and editing. I just really appreciate this channel. Thank you guys. Ethan gets down in the shop too. Fab god.
Underated comment
aaAaqw
Oh shit!!! I've been a machinist for 30 years and I thought I've seen it all, till I watched you guys. Good job on the splines
My machine shop does that for me! They fix anything, no I'm talking about anything!!!!
So right now Camaro have 3 sets of wheel. Road, dirt/extreme and snow. Such epic!
I am a Spokane lifer, work at a machine shop in CDA, and appreciate the hell out of your "N ID" ingenuity!
I just bought a 6V for my 2 yr old grandson that has this same Camaro body and couldn't resist watching this build.
BRAVO!!
What a badass toy!
When you have the "toys" and the engineering mindset amazing things come together. You Ethan are Awesome. Don't think there's anything you can't figure out..well done.
AvE is smiling upon you for making that North Idaho Spline Cutter.
Eva suxx
@@brickman6243 Hey man, have you seen how good Eva Longoria and Mendez still look?
And this guys talking down on Eva's
@@Onewheelordeal I'll drink to that 8 days out of the week.
@@brickman6243 you got her number bruh?? ;)))
Good show! You guys are the best! I get annoyed easy but yet i have not been annoyed watching your show. I am very critical and very picky and i cant seem to find anything to dislike on your show! Keep up the good work. May God keep blessing you all.
for winter change the radiator fan to blow towards seat for heating :)
@Grind Hard Plumbing Co. Put the tap in the Chuck in the tailstock, leave the tailstock unclamped from the lathe, put it in it's lowest gear and feed the tap in. Reverse the lathe to pull it out. Simple perfect tap every time.👍🏻
Theres needs to be a race league for these kinds of carts. I'd love to see a huge collab across all the go power sports sponsored channels and a final Mario kart style race!
There needs to be a company that makes these super karts or whatever you want to call them first for folks like myself that have the talent to drive it but fall short on the talent needed to build them. Otherwise, yeah I agree that there needs to be an official sanctioned racing league for badass mini car go kart things
@@rollin18wheels you got $10,000? you got real skills or you play Mario kart and pretend you got skills ?????
There is !! 👍😎🏁
ua-cam.com/video/laaeFNetV2I/v-deo.html
There is we have a few down here near houston tx
That is cool!!!!!!!!!!!
I have no idea why this old video was recommended, but thanks for adding the captions. I can hear just fine, but I prefer to keep the volume fairly low. So, I keep CC enabled.
This channel needs more love
U ned more luvv
@@brickman6243 facts
1.05 million subs dude
Great use of the grinder for splines,good improv .cool project ,let er rip .
Looks sick and I haven’t even started the video😂
Ethan still never siezes to amaze me with his backwoods ingenuity. Missing new songs though, it's been a minute...
Really cool
I just wish you had done this to the Odyssey
So you can say “ we turned a snowmobile into a go cart that we turned into a snowmobile”...sounded funny to me anyways 🤷🏼♂️
they are still planning it
www.bmikarts.com/Snowmobile-Conversion-Kit-for-150cc-300cc-Go-Karts_p_10901.html
I thought the same thing lol. Kill snowmobile to build ATV, turn ATV into snowmobile.
These guys never cease to blow my mind
Kinda like the dirt bike scooter snowmobile thingy
A trick i learned for helping keep the tap concentric was to use the flat face of drill chuck on the tail stock to push against the back side of the tap wrench. great video as always!
Seasonal build. I like it!
Now it's time to build a small wrecker to tow your stuff back to the shop! Good job guys best channel on UA-cam hands down!
You definitely are Grind Hard this week.
The guys at Cars and Cameras, John and Isaac, have never tried anything like this, you are very inventive! You need a sponsor though, I like your ideas and the low-buck ingenuity, I'm sure even more could be done with more money to play with. Nice!
This looks like it belongs in a live-action adaptation of 'Despicable Me'!
I could see the minions driving them in a snow related film
Pls no
I really appreciate how you guys held out on the video until everything was filmed to be put together correctly. Other youtubers need to learn this great technique. With that being said you two do an amazing job together and make very high quality content.
Snowmaro! Skimaro!
The amount of fun you guys have is just unfair. I'm not sure I even know what real fun is and you guys are over there having a blast in every video. I need to make some life changes.
Plow attachment time!!!
Now those tracks are the coolest thing I've ever seen!!!!!!! That is flipping awesome!!!! How did I miss this one when it came out?!?!?!
omg i was not expecting this xD
awesome guys
I very rarely give a thumbs up, but after seeing an angle grinder attached to the lath. That's just awesome.!!!!
Absolutely awesome!!! Gets me thinking for a project myself..... Now to get the wife to be on board lol
@Whuts Uhp nah guy, I respect my wife and our marriage... Plus if she's on board it makes a small project into a, well...over kill and detailed
That thing is so cool y’all have inspired me to build one of these myself i have a taotao 50cc quad and a bronco powerwheels so now im making one for me and the kids so thank you for the inspiration guys
13:00 "come with me, and you'll be, in a worllldd of osha violations..."
🤣🤣🤣
OSHA isn't the boss of me.
I totally sang this in my head lol wonka style
They arent the sanctioning body and arent invited.
Appreciate the build to hold us over. Yes we are greatly waiting to see the 4x4 build.
The ingenuity of these guys is on a whole different level from anyone else. Keep up the good work!
Epic...
How cool would it be to ride that on a ski piste!!!
Класс! Это реально крутой аппарат! Удачи парни! Продолжайте в том же духе!!! Молодцы!
Takes apart snowmobiles to make things
Makes things into snowmobiles lol
That looked bad ass! I guess the slow motion made it look a lot cooler than it really was but it still looked like a lot fun. I knew he was gonna break it lol. The whole time I was like don't break don't break, so everyone else could play with it, next scene was mangled parts... Looking forward to senderella on tracks and skiis! Awesome stuff guys! You never disappoint! Glad you guys have been able to keep the fun going! I could be jealous but am just happy people can make a living building complex toys and showing them off these days!
order 2 more and put them on the jeep
the one with awd.
Mäx Ringwald putting 4 tracks instead of 2
@@verovex7723 990 ktm engine would be strong maybe
too small and would break even easier
@@alexanderpotzelsberger3567 not that jeep
I have never heard anything as beautiful as "a north Idaho spline cutter"
Go power sports should sell those
I miss Sandpoint soo very very much. If I could be on Pack River Road at my old house I would be absolutely delighted. Keep rocking it!
They tracks doing well considering the power in that thing! I looked at these on the bay and didn't think they would handle even a 150cc I was wrong tidy as build👍
If it can be built, it will be built. And build it they did!👍 So cool man. Cheers 👍 and beers 🍺🍺🍺 from British Columbia 🇨🇦
madlad turned a lathe into a mill
Pretty sure This Old Tony would have a stroke
Drone Tip: Put some 'Conformal Coating' on the electronics of it so if you crash in the snow the heat won't melt it and fry the FC, esc's, VTX etc.. don't worry about the motors & don't get any in usb connections or on any buttons. ..And don't run your batteries so low!! lol, not good for them, they won't last. Good work tho! Stoked on everything you guys do and pumped you got a racing drone! I've been flying them for years and with your filming skills you'll be able to get shots 'regular' drones could never get.
"Your mother was a snowblower!" `jonny5
Cars and cameras, as entertaining as they are. Can NOT hold a candle to you guys!!!!
You guys should put 4 of these on the AWD jeep obviously bigger ones though
I watch alot of backyard type builders! You guys are LEGIT with those power wheel builds, great stuff!!!
I have the same Atlas lathe, there is an indexer under the headstock cover! There's 60 little holes on the ring closest to the Chuck, and a pin that will lock it in place. Much more accurate and less math!
Very impressed with the spline cutting idea! Thanks for sharing guys!
19:27 use ski wax, should equalize the drag a bit.
Ok video is a year old but i am so glad i crossed up with it. I was just looking at these same tracks for a old mower. But now i know they are too small. Great job making splines to make these work. Cool car. Keep up good work.
I wish i could do more than just like and subscribe!!!! I love this channel and everything y’all make. Great vids keep it up!
Buy the merch 😂.
Those splines should hold no problem. I had to modify a chevy dana 44 drivers side axle shaft for an 78 f150 I had. Thought they had the same spline count they were cut different..an hour or so with a dremel too and those splines fit my spider gear perfect, held up to getting beat on 36s too..keep up the awesome work!!!
That would be awesome on a lake with hard packed snow.
I think you have created a new racing sport. That Snowmaro was so fast in the snow. Competitive go-cart racing on a snow track. I would watch it.
That looks so sick man! Keep up the epic builds can’t wait to see the 4x4 in more montages :D
Why are these people not super famous like come on guys. All this work they put in👍
The ‘Snomaro’ 😂
For the extreme winter vehicles enthusiasts, there's also skis to replace bicycle front wheels with. It's all very awesome
is there a link for this kit? i have longed for this in my life. i have several things i could apply it too. hook a homey up!!!
Right 😭😭😭
Same
Just search Ali Express for "kart snow tracks" and you will find what you are looking for.
your spine cutting technique is absolutely amazing. 10/10
How about a link to this kit, I'm interested in getting some. Keep up the great work.
Josh 1781 look in the reply section of his comment someone linked it
www.alibaba.com/product-detail/Go-Kart-Karting-UTV-Buggy-Quad_62428272562.html?spm=a2700.wholesale.deiletai6.19.2fe3164ahvEMZC
Lots of similar, with or without swing arms, etc. about $350 delivered.
@@robertkb64 Thank you sir
Every time video you make, a book on workshop safety is lit on fire
It’s from “The Grinch.” The Whos have all kinds of cool inspiring vehicles :)
Kk. My daughter’s 2yrs old.
The N Idaho Spline cutter was genius
I love how most of their toys turn back into “snowmobiles” lol
That's what happens when you live and fabricate in a freezer....I would know LOL
these are cool, belt tracks. Is made for all sizes, pick up ATVs and all vehicles. Disassembling the original car wheels, and assembling this is as easy as spare wheels. the invention is from Sweden, ski-doo snowmobiles are the ones who came up with this idea. these kits are meant for snow, sand (desert safaris, driving up mountains in difficult terrain are very cost-effective, but with simple and powerful equipment, they can be made at home in the workshop. good luck with your projects, I am interested in following you
You guys are the Marines of Fab work....get the job done with what's at hand.....I love it.
Happy New year bro's , I am excited to see what 2020 has for us. The year of perfect vision !!!
yeeeees, YEEEEEES!
What alot of you came here for starts at 18:09.. thank me later.. an before some of you say "I came here to watch the whole build, etc"... some of us didnt.. nothing wrong in wanting to see what we came for an not watch the entire video.. hope everyone reading this has an extraordinary day!
i don’t want them
I NEED THEM!!
PLEASE MAKE THESE AVAILABLE TO BUY!! GUARANTEED that people will buy these!
I WOULD LOVE ONE
those were intended for use on disability assistant wheel chairs!
Hahaha imagine one of those chairs in their hands
@@stevend4544 ya, they would finally have enough power to get more then 70 feet from the door.
To get the ski's to bite better we use angle iron for the skid plate on the runners because they bite the ground better for turning. (I live in Upper Michigan)
Did nobody notice that the tracks are on backwards... and those tracks are from 2 stage snowblowers
D L it’s not backwards...
@@blazepedigo9994 those tracks are designed to act like scoops I've personally used one of the Honda snowblowers they were originally designed for yes they are backwards but who knows maybe for this application backwards is better like how running tractor tires points forward digs and pushes the mud out while running them backwards draws in resulting in better floatation
You guys are awesome, the projects you come up with just makes my head spin. You should check into having a race with different categories of machines and show of all kinds of creations. I know there is a lot of guys out there who are into this hobby. You would be surprised.
Love the vids! Trying to make some vids myself!
Cant imagine what you guys could do with some serious funding. Make me wish i was a millionere, just the idea of letting you guys loose in a workshop with infinitive means of building whatever you wanted.. That would be awesome!
They should do a rebuild on the og barbie car
I cut splines on a lathe every day for a living and this makes me so happy. You guys are incredible and I love your work!!
How is it done properly on a lathe? Out of curiosity...
John Josephson we use a gear hob on a live tool CNC lathe. It allows a lathe to do mill work. You can turn diameters and then mill flats, drill side holes or cut gear teeth. There are many other ways to cut gears but this is the how we do it.
@@vastcosmos2051 Thanks for telling me about it mate :)
I told you before you started this that you would have a problem with that Polaris engine Revving out.
Powet tapping totally works. You Chuck the tap into the tail chuck(?) And run it slow and hit the reverse a lot.
Make an owners manual for the camaro
That maybe hard to do because they mod that stuff so much.
I"m a mechanical designer and spent about a month this past winter designing tracks to fit my son's power wheel jeep because I couldn't find anything already made for it. Fun little project tbh. Just need to do a motor upgrade to 24V so it has more torque without losing so much speed.
Sounds sweet!
Basically this is a go kart that you turned into a snowmobile
Hella creative with quality work. Those axle spline adapters could help out a lot on the 4WD Jeep. Also an extra set to swap out wheels for the Camaro. Those adapters can go a long way👍
Idaho: bippity boppity what could go wrongity
If there happen to be any GROOMED snowmobile trails in the area, try taking the snomaro there!
Awesome work as always, guys.
I got another one:
Random person: *makes little tracks for go carts*
Grind Hard Plumbing: “Hold of my beer”
Dude! Who needs any kind of milling machine with y'all having such a great mechanical intellect! Keep on it fellas!
where is the muststang like this so they will see it
You ok?
You know it is a Grind Hard Plumbing Co video when you like the video before it even starts
Where can we order tracks from
Awesome how you guys figured how to make it work for a while
i wanna know the 47 people that didnt enjoy this...uncultured swine
In the north of China (like Harbin), you can rent small ATVs for a 10 minute ride on any frozen lake or river. People love these kind of activities on week-ends during the New Year festivals. It makes sense that they build these tracks for go-karts and small ATVs
About a million Canadians want this
That's cool that grinder gives a whole new meaning to tool steel