*I have the 7ft medium duty rod. I have used it many times and it has held up well. This rod is a great rod for the price, it is pretty sensitive, and much stronger than it looks like it would be. I have caught a 12lb striper hybred as well as quite a few in the 5-7lb range, and never had a fear it was about to break.*
That was very informative and very well filmed. You are a reel bad dude! Thanks for a great video! Me and a Bud(or 2) are getting ready to break down my Abu Garcia right now. Keep up the great work!! Bruce Floyd Jax Beach
Awesome video, Thank you! I followed both the left and right side, and Im still having an issue with the reel. Basically, I took it fishing down in Freeport, and while wading, I submerged the reel for a couple minutes trying to un-tangle live bait lines I'd tied on. Now when I push the thumb release the reel will let me cast it but when I start turning the crank, it doesn't engage to spin. I followed these directions to a "T", but after reassembly the thumb mechanism still doesn't pop back up when I start reeling in. Any suggestions?
Thanks for these 5600C4 videos, Clayton. I cleaned 2 and they now work great. I have a question......when I removed the left side plate, I only had 2 brake items sticking out, Your video showed about 6......????
I believe what you are calling the retainer clip under the handle. Is on upside down. I really enjoyed your video and used it to help me pull mine apart and clean it. Mine has never been pulled apart I brought it brand new and that clip was the opposite side up when I took the handle off. I think it's designed to put some reason on the star drag handle as it is loosened.
Clayton just watched your video, and it was very helpful in cleaning my reel. Question for you: I want to order some of those c-clips, what size are they for the 5600.
Well done video Just a pointer working on Left Handed 5601 C4 Reels The10 MM nut that holds on the handle is,,,,,, Opposite Thread Learned the wrong way and stripped out the nut and gear shaft My bad. Darn
Clay could you kindly tell me where the 4th ball bearing is? Abu's website says "4 ball bearings plus 1 roller bearing" but in my reel (exact same as yours) I only have 2 on the spool and 1 on the worm gear. I emailed Abu and they told me "there's one pressed into the side plate on the handle side" but mine does not. Do you have this 4th ball bearing? It's driving me crazy!
I don’t know if I’m doing it wrong or what but I cannot for the life of me get the 10mm nut back on the handle the threads are not stripped because they are brand new parts and tips? Very informative video helped a lot !
So that nut can be a big pain in the butt due to the fact that it's not beveled. There are a few things you can do. Try slowly turn the nut backwards as if you are trying to take it off with your thumb and middle finger while applying slight pressure downwards with your index finger. Keep turning until you feel a "click". That click is the threads falling into alignment, once that happens turn it the correct direction and see if it starts. Second way is all depending on your skill level and how comfortable you are with "customizing" your new reel. You can take a small Jewelers file and put a very slight bevel around the top of the shaft. Be very careful doing this so you don't damage the rest of the threads. If you need more help feel free to let me know on here and I'll make a video just for this. Hope this helps.
Nice job as far as it went but you failed the most important issues. That is the Thumb Bar Spool Release. The major problem I have with these reels are the thumb bar not releasing the spool or not reengaging the spool when you start to reel. The mechanism inside gets out of alignment and it is a bugger to get it working properly. Thanks.
Why doesn't that have an axial clip? I was looking at the schematics and the 5600C4 has one. I was trying to watch this video to see which way it goes on, but you don't have one, and if it's in the cap you have to put it on the spool shaft with the notches correct
Thank you very much. Very good tutorial.
*I have the 7ft medium duty rod. I have used it many times and it has held up well. This rod is a great rod for the price, it is pretty sensitive, and much stronger than it looks like it would be. I have caught a 12lb striper hybred as well as quite a few in the 5-7lb range, and never had a fear it was about to break.*
Great toturial! Shout out from the Netherlands!
That was very informative and very well filmed. You are a reel bad dude! Thanks for a great video! Me and a Bud(or 2) are getting ready to break down my Abu Garcia right now. Keep up the great work!! Bruce Floyd Jax Beach
Awesome vid!!! Been paying for gen maint but now I'll just do it myself. Thanks!!
I like the video very informative in-depth break down .
Awesome video, Thank you! I followed both the left and right side, and Im still having an issue with the reel. Basically, I took it fishing down in Freeport, and while wading, I submerged the reel for a couple minutes trying to un-tangle live bait lines I'd tied on. Now when I push the thumb release the reel will let me cast it but when I start turning the crank, it doesn't engage to spin. I followed these directions to a "T", but after reassembly the thumb mechanism still doesn't pop back up when I start reeling in. Any suggestions?
Thanks. You help me a lot.
No problem, happy to help
Thanks for these 5600C4 videos, Clayton. I cleaned 2 and they now work great. I have a question......when I removed the left side plate, I only had 2 brake items sticking out, Your video showed about 6......????
I believe what you are calling the retainer clip under the handle. Is on upside down. I really enjoyed your video and used it to help me pull mine apart and clean it. Mine has never been pulled apart I brought it brand new and that clip was the opposite side up when I took the handle off. I think it's designed to put some reason on the star drag handle as it is loosened.
I meant tension on the star drag handle as it is loosened.
Thanks. Just found you and subscribed. Are you still posting reel repairs and service ?
Clayton just watched your video, and it was very helpful in cleaning my reel. Question for you: I want to order some of those c-clips, what size are they for the 5600.
I’ve been using corrosion block marine grease it’s good
Well done video Just a pointer working on Left Handed 5601 C4 Reels The10 MM nut that holds on the handle is,,,,,, Opposite Thread Learned the wrong way and stripped out the nut and gear shaft My bad. Darn
Would you say Clenzoil makes a good oil and grease?
Wait. Where is the black plastic spool axel 'positioner' and is it important? What does it do? Please reply. Thanks
Clay could you kindly tell me where the 4th ball bearing is? Abu's website says "4 ball bearings plus 1 roller bearing" but in my reel (exact same as yours) I only have 2 on the spool and 1 on the worm gear. I emailed Abu and they told me "there's one pressed into the side plate on the handle side" but mine does not. Do you have this 4th ball bearing? It's driving me crazy!
I don’t know if I’m doing it wrong or what but I cannot for the life of me get the 10mm nut back on the handle the threads are not stripped because they are brand new parts and tips? Very informative video helped a lot !
So that nut can be a big pain in the butt due to the fact that it's not beveled. There are a few things you can do. Try slowly turn the nut backwards as if you are trying to take it off with your thumb and middle finger while applying slight pressure downwards with your index finger. Keep turning until you feel a "click". That click is the threads falling into alignment, once that happens turn it the correct direction and see if it starts. Second way is all depending on your skill level and how comfortable you are with "customizing" your new reel. You can take a small Jewelers file and put a very slight bevel around the top of the shaft. Be very careful doing this so you don't damage the rest of the threads. If you need more help feel free to let me know on here and I'll make a video just for this.
Hope this helps.
are the side plate nut are original or mod？
Do these reels break-in?
What mm is the E clip?
What size is the eclip?
thx
Nice job as far as it went but you failed the most important issues. That is the Thumb Bar Spool Release. The major problem I have with these reels are the thumb bar not releasing the spool or not reengaging the spool when you start to reel. The mechanism inside gets out of alignment and it is a bugger to get it working properly. Thanks.
the anti reverse bearing is called a sprag clutch
Hi How do you get the axle out? even with the tension knob loose axel is stuck!
Take the tension or knob completely off and there will be a little round black clip in there. Be careful removing this as they tend to break easily.
Why doesn't that have an axial clip? I was looking at the schematics and the 5600C4 has one. I was trying to watch this video to see which way it goes on, but you don't have one, and if it's in the cap you have to put it on the spool shaft with the notches correct
Can you maybe make one for the: Abu Garcia revo s?
Can do!
I have Abu Garcia Silicote reel oil. I assume this is cool for these reels?? Bruce Floyd Jax Beach
Yes, that will definitely work.
please tell me online shop where I can buy spare parts for this reel
You can buy parts from dadsoletackle.com I just bought couple of abu ambassadeur C3 from them last week and couple time before that
seem you are missing spool axle clip
Lol...custom oil i designed....smh