I open up this kenmore 500 clothes washer to discover why it was full of water and not pumping. Something was stuck in the pump impeller, I removed it and solved the problem!
I am very grateful for this video because I was able to unclog the pump. The only thing I couldn't do based on this video is put the machine back together.
ALL I NEEDED was how to safely get the top part off & was afraid to break it... glad it just pops but needed quite a bit of effort doing doing! Always helps to know in advance how best do anything as I've broken too any things in my not so short of a life! Haha!
Thank you! You saved me a bill! Just an FYI to everyone else, the amount of water that WILL drain is the amount of water that is in the washer. I recommend removing as much water as you can before doing this. For what ever reason I figured there was some sort of stopper and the only water that would come out was the water in the hose. I was wrong. Luckily I had a bucket nearby and caught most of the water! Thanks again!
@@FixerMerlin Well, it would fill and agitate and wash, but wouldn't spin or drain. If the lid is up, it won't spin or drain, right? So, I checked out the easiest solution first.
@@undertheseaslime2629 I taped both wires separately and then tucked them inside the washer between the drum and the side. So, yes, I basically cut them and disabled the switch since it had fallen apart anyway. Still working after 2 months! 🤠👍🏻
duuuuuuuuuuuuuude i swear i love you LOL this just took me approx 20 mins to do i had the same issue--- wife's sock got stuck! you're a modern day hero!
I know what that is! 😂. Thanks so much for the video. The EXACT same thing was wrong with my washer and I fixed it for free. My clog was a bra pad and it looks exactly like what’s in the video.
Do you have the make and model # for this washer. I have the exact one. I can only tell its a Kenmore Elite. I can't find the serial #. But what I need is the hood switch and plug harness also. Mine shorted out
With this broken washer, when the timer got to the drain cycle, was there just silence and the timer wouldn’t move? Or did you hear any noise as the drain pump tried to do its job? I have silence and I am about to do this procedure, but I wonder if it is the switch instead.
Thank you for helping ma figure out how to get the control panel open. Mine was the lid switch. Now I just need to figure out how to put the clips that fall off when opening, back on. Not sure which direction they go back in.
@@crystalcorrales1214 After you figure out the position of the clips that pop out when you lift off the switch panel, you can position them back the same way and it just snaps back on. From memory a year ago. I have no kids here, so I just bypassed the switch, essentially connecting the two wires to the switch together. This way, the washer will go through the cycles with the lid up or down. Basically defeating the safety. But again, No kids here and I know not to stick my hands in when it is spinning.
I pulled mine apart and it doesn't seem to be either of these issues. That little internal spoke spins fine and when I blow on one end of the pressure tube I can hear the clicking
Hi my mom have this exact model and I’m having trouble with her. I tried all the troubleshooting that I know of and still the washer wash briefly and it won’t drain. I follow what you did in this video but nothing is Clogged. Any other solution?
The impeller blades spin freely? Could be the pump? I’ve also had one need a new timer/ control dial. Basically it had failed and would not turn the pump on at the preselected time. Not sure if that helps but good luck friend
My understanding is that kenmore was sold exclusively by sears, and seeing as they’re no longer in business I doubt the kenmore brand is being sold. I think there are other brands of basically the same machine but don’t know if they are still being made?
Interesting. If there’s power at the plug you could test to make sure the washer cord and plug or a connection haven’t failed somehow. It seems unlikely but I’d confirm there’s power to the timer. Check that something hasn’t come unplugged or disconnected. Check the lid switch!! Maybe the timer switch just decided to call it quits. If you’re comfortable with such things then test if the timer is allocating power to the the associated downstream connections as per the cycle demands. This could be done with a voltage tester or with the power off using a continuity meter, take precautions and don’t get yourself electrocuted.. if that’s what it is they’re not cheap but can be found locally or online for a reasonable price and are basically plug and play. If power is confirmed getting to the motor when it is called for in the cycle then maybe motor is fried. Hard to tell, but in that case it might make a humming noise or smell like burning wires. Those are a few things you could test for. Be careful when working with electricity be safe and if you’re not comfortable just call the repairman. Good luck and Sorry for writing a Novel, I’m highly caffeinated and ready to fix something 🤣
Google the model number + ‘parts’ that should put you in the right direction, or take the old one to your local appliance shop and they should be able to id
@@FixerMerlinhey I’m wondering if you can tell me on this Kenmore model why the water level dial won’t turn, it’s on extra small load and now it won’t turn back to right for larger load? Help?
hmm I have the same problem with same model, I took it apart and there was nothing clogged. So i figured the next step would be to get a new lid switch. I drained the washer manually, but it wont even refill when I try to start a new cycle.
interesting, could be something else like the lid switch or the dial? Did you try jumping the lid switch to see if isolating it solves the problem? (careful if you mess around with electricity)
If it’s full you need to pump it out or use something to empty the water otherwise it’s going to get all over the floor. Take as much out as you can and move it to somewhere like outside so you can drain it
I like the ladies underwear n Bobby pins comment low key at the start homies like imma show you how to fix this washer machine but don’t get shit twisted it goes down over here
@@FixerMerlin well it was the switch that wasn’t linking to the motor so my husband figured it out ! Cut the switch that was connected to the lid so say for instance we start the washer and we have to close the lid in order for the washer to run etc ! I hope understand!! Lol
Im 13 and i just fixed my washer from this video we had a piece of cotton stuck in there thanks so much 🖤
Wow that great!!
This gives me hope
Me too! Im going to attempt it!
I am very grateful for this video because I was able to unclog the pump. The only thing I couldn't do based on this video is put the machine back together.
Same. I'm in that boat right now.
ALL I NEEDED was how to safely get the top part off & was afraid to break it... glad it just pops but needed quite a bit of effort doing doing! Always helps to know in advance how best do anything as I've broken too any things in my not so short of a life! Haha!
Thank you! You saved me a bill! Just an FYI to everyone else, the amount of water that WILL drain is the amount of water that is in the washer. I recommend removing as much water as you can before doing this. For what ever reason I figured there was some sort of stopper and the only water that would come out was the water in the hose. I was wrong. Luckily I had a bucket nearby and caught most of the water! Thanks again!
Thank you for this video! Just took my washer apart to find a toddler sock stuck in the pump. Saved me several hundreds of dollars.
You are welcome! So glad I could help
What else can be said other than thank you. Video solved our problem..... and my daughter has her missing sock back. Thanks again
Excellent fix, my daughters washer had the same problem with material stuck in pump. Thanks perfect video!!!!
Good job! Glad you got it fixed and glad to help!
Thank you! I could not figure out how to take apart my Kenmore 600 series.
Glad it helped!
Mine did this yesterday. It was the lid switch. I simply cut the wires and taped them up and tucked them in. Now I can watch my spin cycle. 🤠
Interesting... how did you know it was the lid switch?
@@FixerMerlin Well, it would fill and agitate and wash, but wouldn't spin or drain. If the lid is up, it won't spin or drain, right? So, I checked out the easiest solution first.
@@undertheseaslime2629 I taped both wires separately and then tucked them inside the washer between the drum and the side. So, yes, I basically cut them and disabled the switch since it had fallen apart anyway.
Still working after 2 months! 🤠👍🏻
Thank you for this video. You just saved my family hundreds of dollars.
Nice!! $$$$
duuuuuuuuuuuuuude i swear i love you LOL
this just took me approx 20 mins to do i had the same issue--- wife's sock got stuck! you're a modern day hero!
Love you too bro!!
Thanks for the video. It saved us 100s of dollars, so easy to follow
Thanks a million 😊
Thank you for this video! You just saved me a ton of money!!
You are welcome! 🤣Remember money saved is money you can spend on more tools!
Fixed my washer. Thank you 🙏🏽 😊
Fantastic!
Always nice to find something wrong that is an easy fix.
So true, and also inexpensive at least in this case..
Bro , you just saved me 800$ ... I appreciate you ❤... sock in the pump 🥴
Nice!!
I know what that is! 😂. Thanks so much for the video. The EXACT same thing was wrong with my washer and I fixed it for free. My clog was a bra pad and it looks exactly like what’s in the video.
Glad it helped!
You rock! I will gladly help spread your channel. Thank you
Haha thanks!
Do you have the make and model # for this washer. I have the exact one. I can only tell its a Kenmore Elite. I can't find the serial #. But what I need is the hood switch and plug harness also. Mine shorted out
Hey man Great video! Thank you. May u help me fix mine its not draining or spinning. Just did a load it was fine.
With this broken washer, when the timer got to the drain cycle, was there just silence and the timer wouldn’t move? Or did you hear any noise as the drain pump tried to do its job? I have silence and I am about to do this procedure, but I wonder if it is the switch instead.
Thank you for helping ma figure out how to get the control panel open. Mine was the lid switch. Now I just need to figure out how to put the clips that fall off when opening, back on. Not sure which direction they go back in.
I figured it out.
That’s what I’m nervous about! Putting it back together!
@@crystalcorrales1214 After you figure out the position of the clips that pop out when you lift off the switch panel, you can position them back the same way and it just snaps back on. From memory a year ago. I have no kids here, so I just bypassed the switch, essentially connecting the two wires to the switch together. This way, the washer will go through the cycles with the lid up or down. Basically defeating the safety. But again, No kids here and I know not to stick my hands in when it is spinning.
I've got a series 80 and I can't seem to unplug the lid switch any help would be appreciated.
How much resistance should be impeller have when turning by hand? Didn't have a clog but the impeller needs some force to turn by hand.
I can’t remember but it should spin freely. Maybe your motor is kaput?
Thank you, we just fixed the washer.
Great job!
im a new maintenance supervisor and need help with these washer and dryers! can you help me??
The stupid sock took forever to get out; but thank you so much for this video!
You are welcome! Glad I could help
I pulled mine apart and it doesn't seem to be either of these issues. That little internal spoke spins fine and when I blow on one end of the pressure tube I can hear the clicking
Interesting, maybe a bad switch/ timer? Let me know if you figure it out
Thanks, I gave the information to Bill in Texas.
Bill from gatesville?
@@FixerMerlin No, another Bill. He fixed it too.
Hi my mom have this exact model and I’m having trouble with her. I tried all the troubleshooting that I know of and still the washer wash briefly and it won’t drain. I follow what you did in this video but nothing is Clogged. Any other solution?
The impeller blades spin freely? Could be the pump? I’ve also had one need a new timer/ control dial. Basically it had failed and would not turn the pump on at the preselected time. Not sure if that helps but good luck friend
My lady put my wallet in her purse and she’s off to Best Buy… I called her and said hold on woman! I might fix this ol kenmore! 🤣 thanks man!
@fixer merlin how or where do I fix the lint issue every wash keeps coming out with lint.
Kenmore 800 washer
Like the washer is damaging your clothes? Or they are coming out dirty?
would you know if they still make kenmore washers,as i have one its a 70 series .
My understanding is that kenmore was sold exclusively by sears, and seeing as they’re no longer in business I doubt the kenmore brand is being sold. I think there are other brands of basically the same machine but don’t know if they are still being made?
Am looking for the filter location can u help me is the similar machine on you video thanks
I don’t think there is a filter?
How does a rag get in there? From the drain tube?
Im not completely sure but it was really Jammed in there.
Mine has no power, it just turned off. The outlet does have power. would this be the same thing ? with the power loss ?
Interesting. If there’s power at the plug you could test to make sure the washer cord and plug or a connection haven’t failed somehow. It seems unlikely but I’d confirm there’s power to the timer. Check that something hasn’t come unplugged or disconnected. Check the lid switch!!
Maybe the timer switch just decided to call it quits. If you’re comfortable with such things then test if the timer is allocating power to the the associated downstream connections as per the cycle demands. This could be done with a voltage tester or with the power off using a continuity meter, take precautions and don’t get yourself electrocuted.. if that’s what it is they’re not cheap but can be found locally or online for a reasonable price and are basically plug and play.
If power is confirmed
getting to the motor when it is called for in the cycle then maybe motor is fried. Hard to tell, but in that case it might make a humming noise or smell like burning wires. Those are a few things you could test for. Be careful when working with electricity be safe and if you’re not comfortable just call the repairman.
Good luck and Sorry for writing a Novel, I’m highly caffeinated and ready to fix something 🤣
Thanks man
thanks, i hope this works for me also.
It’s definitely worth your time to check the pump impeller first and see if that’s the problem. So satisfying to figure it out!
If there is nothing stuck in the pump or hoses (that I can see ) what would be the next thing to look at?
Does it spin freely? Also check power to the unit?
@@FixerMerlinmine spins it just doesn’t drain
Great video. I just don’t have the tools ugh
Haha! Then it’s the perfect excuse to go buy some! 😈
@@FixerMerlin yes seriously! 😂☺️
How did you get the clamps on the pump loose? Mine are so tight
You can use pliers to squeeze the little brackets, which loosens the ring clamps
You mean the hose clamps? Like incangold said just use pliers
Good gob Mr
I don’t know if you’ll see this, i’m going to order the part and try and do this myself, I don’t know what tools I need to buy. I have no tools.
I have the same washer but can’t seem to find a belt for it online can you help me out
Google the model number + ‘parts’ that should put you in the right direction, or take the old one to your local appliance shop and they should be able to id
@@FixerMerlinhey I’m wondering if you can tell me on this Kenmore model why the water level dial won’t turn, it’s on extra small load and now it won’t turn back to right for larger load? Help?
hmm I have the same problem with same model, I took it apart and there was nothing clogged. So i figured the next step would be to get a new lid switch. I drained the washer manually, but it wont even refill when I try to start a new cycle.
interesting, could be something else like the lid switch or the dial? Did you try jumping the lid switch to see if isolating it solves the problem? (careful if you mess around with electricity)
Imma do this tomorrow and hopefully its the case.
Good luck hopefully its an easy fix for you too!
@@FixerMerlin no clog. It had vibrated off the piece of wood I had keeping it level. So yeah easy fix lol. Thanks.
@@SplatterTheorist haha! Well that’s really easy then!
I can't get the pump to slide off. I unclipped it, but it won't slide off.
Not sure, maybe it’s just stuck on? If the clips are off maybe try gentle tapping and pry off with a screwdriver?
I hope you see this before i f**k up my kitchen floor hahah should i have bucket handy or just towels down? washer is full 🥲
I hope you see this before i f**k up my kitchen floor 😅 hahah should i put bucket or just towels down? washer is fullll 😩
If it’s full you need to pump it out or use something to empty the water otherwise it’s going to get all over the floor. Take as much out as you can and move it to somewhere like outside so you can drain it
Is it too hard to turn the phone sideways? I hate this.
I like the ladies underwear n Bobby pins comment low key at the start homies like imma show you how to fix this washer machine but don’t get shit twisted it goes down over here
where is the filter pumop
As far as I know there is no filter on this type of washer
I did everything in video and it still doesn’t drain i me it spins just doesn’t drain
Sorry I’m really not sure
i tried this and it didn’t have anything in the pump.
Then I guess it’s a different issue?
Mine isn’t getting the soap out? Help?
It’s not pumping?
@@FixerMerlin how do I fix that?
I’d start by ensuring there’s power to the plug, if so unplug it and manually remove the water with a bucket then have a look inside
Have trnents but thair own washers
BRAW PAS, USE FOR SMALL TITIES
So we literally took our apart and found out it was a burnt shortage. 🥹🥹🥹 had it for 3 years
Like a fuse? What part was damaged?
@@FixerMerlin well it was the switch that wasn’t linking to the motor so my husband figured it out ! Cut the switch that was connected to the lid so say for instance we start the washer and we have to close the lid in order for the washer to run etc ! I hope understand!! Lol