Kenmore Washer Not Spinning - How to Troubleshoot and Repair
Вставка
- Опубліковано 13 лип 2024
- How to repair a Kenmore washer that sounds like it's spinning, but it's not. This is a very simple repair you can easily do yourself. The motor coupler is one of the most common parts that break causing your washer to not spin.
Order a Motor Coupler
amzn.to/1J7gwBe
Cabinet Removal Video
• Whirlpool / Kenmore Wa...
How to Put the Cabinet Back on Video
• How to Get the Outer C...
I like to hear your comments so make sure you leave them. I read every single one of them. If you have any questions also leave them in the comments, I try to answer as many as I can.
Please give this video a thumbs up if you liked it and make sure you Subscribe to my channel for more repair videos.
Thanks for Watching - Навчання та стиль
Hey man, I just want you to know that 10 years after you posted this video, it came in clutch for me. Friday night I got home from a rough road trip & within minutes of coming in the door, my washer all of a sudden made the exact noise in your video. My wife said it was the first time it had done that, and it was the 7th laundry load of the day. I found your video, checked it out, and voila! I ordered the part & got it 2 days later, fixed it, and now it's back up and running. These old 90 Series Kenmore "scratch & dent" floor model washer & dryer have paid for themselves over & over for the past 25 years.
Channels like yours give ordinary blue collar people the confidence and know-how to get under these things and fix them ourselves. Thank you.
He is a Marine. Robert William “Bill” Newberry, 38, of Sand Ridge Rd., Howard, passed away Monday, October 24, 2016 at Mount Nittany Medical Center.
Born on November 16, 1977 in Delaware, OH, he was the son of Donald and Pamela J. Glass Newberry, Jr.
Bill was a 1996 graduate of Lock Haven High School.
He then served in the United States Marine Corp for four years.
On June 19, 2006 he married the love of his life, Tina Palski Newberry.
Bill was a self-employed appliance repairman and electrician. He also ran his own You Tube channel. RIP and thank you for your service.
I am so sorry! What a terrible loss. My condolences to his family. May Bill rest in peace.
Thank you for saying he IS not was. Once a marine always a marine ❤
Damn. RIP and Respect
@@codyharney2997 Glad you picked up on that. I was just curious as to why his videos stopped so suddenly, and did a little research, only to find this obituary. I can picture him fine-tuning those Pearly Gates as his first order of business. 😇
Even though this was posted 7 years ago I want you to know that I used this video today to fix my washer and I want to tell you thank you and !+! May GOD bless you, your family and your friends !+!
@@John-fq2io so sorry to hear that.... even though it happened in 2016 I realize holidays will be very tough for them forever so I will put them in my prayers
@@John-fq2io Well, he's still helping people out on UA-cam, even after death.
@@Dogmata he just helped me out. God bless his soul and the family he left behind.
@@John-fq2io wow man....God bless him and his family.
@@caressacarnes8750 the only
Thank you Bill. Even though you are gone, your videos continue to help millions of people. This 10 minute repair saved me a lot of stress, time, and money.
What happened to him?
@@ArtFerguson Bill passed away. I found out the same day I thanked him for posting this video.
@partyguarder wow, it is a shame because people like Bill is what we need here on UA-cam, RIP.
How he pass away
10 years later this gem of a video just helped me fix my washer. Ur the goat man🐐
Im happy his videos are still up! This seems like a genuinely nice person. From what I understand he has passed away. RIP my friend that I never met. You really did make the world a better place.
Just came across his video. Was getting ready to ask him a question as my kenmore just went out. Then I saw your post. May he rip.
Awww that’s awful to hear, I’m just watching to fix my washer. It’s nice & simple instructions.
My boyfriend thought I wouldn't be able to fix my washer myself....but I did. I told I am a do it yourself type. Feels good to prove him wrong.🔧🔨Thanks for this video.
You want to come over and fix mine?
I bet that didn’t make him feel good 😏 you should of showed him the video so that he could do it
For $5.30 and this video, we fixed our 20 year old kenmore washing machine! Thank you so much for posting this excellent video! Aside from the money savings, we feel pretty proud ! 😆
I’m sooooo thrilled to have found this video and tutorial. Aside from saving me money, two of the most important things to me are saving the environment/resources and there ARE people who seek to fix things instead of toss and buy. Congrats to ALL and Thank You for recycling.
Many thank yous for making and not taking the video down. A late comer like me gets to benefit it. 🙏👍
Had to look up this fix today, over 10 years after you made this video. You saved me a lot of time and money diagnosing and repairing this old washer. It looks like many others have been helped by you as well. I appreciate you, and I'm sure they all do as well! Thank you!
If you're ever so inclined, you may benefit from having affiliate links in your descriptions. The links you posted were very helpful, absolutely. I would have loved the option for you to get a cut from my purchasing the part from amazon, as I'm sure many others would as well.
So, I just found your video today (March 5, 2023) when I discovered that my Kenmore 80 wasn't spinning the water out, and none of the spin cycles work. Happy to have found your video. It's really straightforward and relatively easy to follow. I shared this with my better half so he can watch it and hopefully attempt to repair it sometime this week.
Thank you for posting these helpful videos.
Thank you so much for doing these videos! Popped the cabinet; tilted it back; broken motor cupler; ran to the store, got a new one; unplugged everything, installed it and plugged everything back together. It's running like a champ. Step by step just like you showed. Really appreciate it.
Thank you. My exact problem. You are truly righteous to film this repair for everyone's benefit.
Bill Newberry you are the best! Time and time again I use your videos to get me through my repair jobs on my Kenmore washer and dryer. Your videos are clear concise and incredibly informative! I’ve had my washer and dryer since 2002 or 2003 and they are still going strong thanks to you!
Very well put Jack.
Bill. THANK YOU SO MUCH!!!!! My dad has always been the fix-it guy around the house, but yesterday, when the washing machine stopped spinning during my load of laundry, I felt responsible for the problem. I checked UA-cam and your video came up. I ordered the motor coupler yesterday with one-day shipping. It arrived this afternoon and I finished the whole job in less than a few hours, thank God. It works again! Your video really helped me! Thank you!
Thank you, Bill, for posting this! This was the first video I checked out, and the only one I needed. Your time and effort are much appreciated!!
One more happy customer! $10 and 10 minutes (I didn't even take the shell off) saved me the cost and hassle of a repair call - or a new washer. My wife really appreciates the time and effort you took to make these videos. Thanks!
I know this was 3 years ago, but I was hoping to do this without taking the shell off. Do I just take off the back? I have a Kenmore 90 series
@@eafranz2452 I laid the washer on its back and accessed the coupling from the bottom. You'll want blocks or something to support the weight of the motor when you undo the bolts. Good luck!
Thanks so much for not dragging out the video and getting to the point So many others spend an hour explaining a 10 minute fix. ☺️
Years later and this video is still relevant. Thanks a bunch for posting this!!!
Thank you so much. I was going to buy a new transmission ($190) and now I just need a new coupler. Thanks to you. My washer, on spin cycle, was turming real slow while making an alarming noise. A repair shop sold me a clutch and said that if this doesn't work it's probably the transmission. I replace the clutch and it fixed nothing. I took everything apart and when I saw that the rubber part of my coupler was torn a bit. I research a found your video. OMG!!!! The plastic part of my coupler still looked like a round hole with two flat spot on it and it did turn the transmission when I used my fingers but when I took it out everything inside is rounded out except a tin place on top. I would have never find that out before it was too late. Thanks a million...
Thank you Bill for the helpful video, my son and I fixed our washer that wouldn't agitate. Thanks for adding the "how to get your cabinet back on" video it was giving us a hard way to go and your video was a lifesaver yet again. Bless you kind Sir.
Excellent tutorial! Exactly what was wrong with mine. Fixed it in 30 minutes. Fantastic!
Thank you so much for making this video. You saved me the repair and service costs. My Wife thought we might need a new washer but with your video, I was able to fix my washer in less than 30 minutes. (18 to be exact, not counting the 5 minutes to take the washer housing off).
For those wondering, I followed the link in the description for the part and found one for 6 bucks. Ordered and 2 days later, our Washer is up and running.
Thank you again for the video and the help. I appreciate it. Next round is on me.
Thank you so much. $10 later, and my washer is back in business! While it was apart, I also finally installed that lid switch I ordered ages ago, likely as a result of another similar video. Good as new! I want to Costco while waiting for the coupler to arrive, and the cheapest washer they had was over $600. You saved me a bundle, sir.
This was EXACTLY the fix that we needed for our washer, thank you so much for posting it! We would have easily spent hundreds of dollars getting it fixed, or dragged the old one out and a new one in for no good reason. Everything went exactly as shown in this video and the cabinet video except that our motor straps had 1/4" bolts in them as well. We were able to get everything fixed without tipping the washer back, although that might have made things easier. Hardest parts were lining up the motor to get it back in and spinning the pump shaft to the right angle to fit back on the motor. Thanks again Bill!
OH - and our old coupler was just plain broken rather than rounded out -- go figure.
Jeremy, if you happen to see this again, what model number was your fix on ? Thx
Thanks for the video, Bill!
I had a problem with my Kenmore washer this morning, and the coupler had failed. It was not rounded out but one of the two plastic wheels in the coupler assembly had broken in several pieces. Replaced the coupler and all is well.
One snag you might run into, however.
When I removed the two metal clips from the water pump, the water pump would not come off. Upon closer inspection (thru one of the water hose ports) it was evident that the impeller was frozen to the electric motor shaft. I soaked it in penetrating oil and let it sit awhile, but it still won't come off. I suspect some rust jacking has taken place where the shaft sticks into the water pump impeller. Anyway...anyone here who encounters this same issue - and the water pump otherwise works and is not leaking - simply leave the water pump in place. Just disconnect the two hoses, and take out the motor and water pump as an assembly. Then you avoid breaking your water pump for no reason. Hope this helps anyone 👍
I had the same issue with my washer, lol. I tried a couple of times to get the water pump to come off but then I left it on anyways but didn't disconnect the two hoses as they weren't really in the way. Both plastic wheels were both broken. I've just ordered a new coupler today, Should be good as new.
Amazing video. My son and I just saved him a fortune by repairing his machine along with your videos. Awesome.
You have no idea how much I appreciated this video. I was able to fix my Moms washer and save her a ton of money, THANK YOU 😊
THANK YOU for making this video and still leaving it up. I fixed my Kenmore 80 series washer today with that coupler part. Only cost me $6.98 on Amazon instead of spending $800 to $1000 on a new washer.
Thanks Bill!! This video helped me fix my broken coupler for $15! You are the man!
Perfect. With this video's help took 7 minutes to diagnose my problem and 15 minutes to fix. Thanks for being so nice to make this video. Great help.
The fact you put the part number in the corner makes you the coolest uncle on earth.
Terrific video!
Many of us today would simply accept and choose to purchase a new washer, and while that would be ideal, not all of us can afford to do that, and I appreciate your taking the time to share your knowledge with the "Tube".
If we're looking for a solution online, we are either hesitant to call a repair person, or simply cannot afford to.
Videos like these truly assist those mechanically motivated to not have to sacrifice between whether or not to put food on the table, or send their kids to school in clean clothes.
I hope these postings bring business your way, and I will call on you for repairs once I can afford to pay someone.
In the mean time, thank you for sharing your knowledge, and I appreciate your taking the time to help me learn how to troubleshoot my issue personally.
You are a Rock Star Sir!
I wouldn't buy a new one even if I had the money ! The older Kenmores last forever and are usually easy to fix on one's own! You don't HAVE to be poor to appreciate them and a little DIY.
Bill I did it with my husband. It wasn't easy yet doable and other than time it was an under $5 dollar part! The clutch was fine now the coupling is new and my machine is powerful again. I appreciate your step by step vid and this girl will seek your guidance again. Totaaly satisfied and sharing your channel with friends. Keep the videos coming
Awesome, I will say though, I did "lol" at the first line of your comment! I am glad I was able to help you out, that makes my day to get comments like this.
Thanks Again for Watching!
Bill Newberry You are right...you did it thru us. We are greatful and will come to see what else your knowledge can help us with. Blessing to you and your family!
Bless you too, Thanks!
Be sure to always check the agitator to be sure it's working right as it needs to ratchet, catches one way and free wheels the other the agitator dogs wear out and if you don't replace them the coupler will break again.
Where did you find it? Im trying to fix mine. Thanks for your help!
Thanks to your great video, I was able to repair my old Kenmore washer for just a few hours of time. Time mainly spent clearing the area around the washer to make some space to get at the motor. I took a gamble and ordered a coupler off of Amazon. What would have been a $7 part was free. It turns out I had been given a gift card by them, and the part arrived in two days. After getting the motor off, I could see that indeed, the coupler was toast. Odd in that mine was still fixed firmly on the shaft, but the plastic pins on the transmission side were completely sheared off, and my guess is that over time the rubber bushing had broken down, since there were tiny pieces of rubber all around the opening of the plate that the motor attaches to. Many thanks again, Bill, it's now back in business.!
YOU JUST SAVED ME A TON of MONEY!!!!!! THANK YOU VERY MUCH! my washer did the same thing. before i seen this, i called to get an estimate to have it repaired. Everyone i talked to said it would be around 200 plus dollars with the service call, parts and repairs. They all said they were going to replace the motor even after i told them it was running. The only thing that was wrong was the motor coupler was broken not stripped out like yours. The holes in the rubber part were gouged out and twice the size! I found one at a parts store for 10$ us, watched your videos, and fixed it in 30 minutes. OH who ever is reading this, LEAVE THE PLASTIC HOSES ON THE MOTOR PART!!! you will see what i'm talking about. It still has water in it. i thought it would be easier to take it off and got water everywhere. OK once again thank you very much!!!
Thank you so much! came to find out my motor coupler was broken in half!! Saving me so much money!
...ha get a machinist to make a steel one, for you. Same as garage door opener, EFFEN plastic gears....where the hell is those engineers heads at ?? up their ***
Thanks Bill!!! It took me more time to watch video than to get at that broken part!! you are a life saver!!!!
Thanks Bill, your videos saved me a lot of time and a service call, my washer is over 35 years old so I was not going to call service tech. The repair video pointed me in the right direction and the video on removing the cabinet saved me quite a bit of time figuring out how to do the job.
Well it's been 10 years since this video was posted and saved me $100's in repair or replacement costs!!
Thank you, thank you, thank you!! With your help I was able to fix my washing machine that I thought was toast. Saved me from buying a new one. Such a cheap fix and you made it so easy!
My coupler was shot, but it was a slightly different issue...one of the plastic splines actually cracked and broke. On further inspection, the rubber center was quite worn with all the hole enlarged.
Thanks again for such a great instructional video!
That is what happened on mine, i wonder why the couplers are made of plastic and not metal, i guess so we will buy a new washing machine.
Thanks Bill! You saved me hundreds of service or replacement dollars! I was able to do the whole job without removing any hoses or dumping any water. I just tipped it back and supported the front and was able to get to and do everything. Your pre-test and post-tests were right on. Talk about a smooth spin cycle afterwards with the first new load!
Tim Roberts Nice Job! Thanks for Watching!
@@BillNewberry Hey Bill hopefully you still here and able to read my comment what happens when that part turns with a good grip what else can it be?
@@BillNewberry I have a kenmore washer that has a belt and it won’t spin
An excellent do-it-yourself video that saved me the cost of an expensive service call on short notice for an old washing machine that I was planning to replace soon. We were able to fix the problem ourselves so we could use the washer while I shopped for the best deal on a new one on Labor Day weekend. Very pleased to have found this video.
Thank you SO much for posting this video! I was able to fix my washer in about one hour for $20. I appreciate people like you so much! I couldn't have done this without your video. :)
With the help of your video I was able to replace my coupler. Thank you for saving me a few hundred dollars!
This saved me hundreds! I'm very appreciative of you for posting this.
ua-cam.com/video/T0-T9OJ1GDA/v-deo.html
Just giving my two cents. Thank you so much for your great video as well as the one for clutch replacement. Mine turned out to be just a coupler and it saved my mother-in-law a huge bill. I would recommend your knowledge and videos to anyone. Thank you again
THANK YOU!!! It only took me about 10 minutes to get the cabinet off (thanks to your other video- and would've been quicker but had to reinstall the back panel that my husband had removed) and about 3 minutes to get the motor off. I just ordered the coupler on Amazon for $7 (plus $10 for 2-day shipping). This was an epic win. Thanks again!
Awesome video, thank you! Although this wasn't my problem (I was sure it was after watching) the video helped me to find that there was a tiny sock stuck in the white gear box thing preventing it from moving. Hopefully this post can help someone else that may have the same problem.
Yea, thank you on the Kenmore spin coupler video you made.
YOU ROCK!!! I thought for certain that I was going to have to buy a new machine! Your 7- minute video and an $8 part changed that. Thank you for saving me SO much money!
I replaced the coupler myself thanks to your video. I paid $19.00 for the part. It was challenging to get the motor back onto the shaft, but it works now! Thanks much!
I just want to know why are you and people like you this nice? thank you for being so nice...
DeepOne We just are!
Bill Newberry now I want to know why is my mother so mean?
DeepOne Maybe she's not mean, maybe you've just been a bad boy! lol j/k
Bill Newberry ich don't think so.... lol2
Yeah, Jesus is a lot more than just a Carpenter! Just pray for me Jeff, to be a Pastor!
HI Bill , just wanted to thank you for the step by step procedure on how to fix a motor coupler watch your video made it very easy and saved me $165 for a guy to come out and fix it thats how much he wanted to charge me so i found your video at first to trouble shoot and then found the video on how to fix and it was much easier for me to take the cabinet off and work as you was doin thanks again sir saved me lots of money thanks again sir !!!!!
Your videos are rock solid. Saved me a ton of money and very easy to follow. Keep up the great work!!!
This was the clearest, most helpful video I've come across in a long time. Thank you, Bill!
I think after all the BS I have been through in the past with washers etc. I am going to learn from all of your videos and start up a repair business of my own LOL (JK).........YOU are a life saver, DIY and save lots off $$$! Thank you!
You'd be alright, I faked it when I started. I was given parts and told to go replace them. At first I'd have to call my boss about every service call because I could not figure out how to get into the machines to replace the parts. lol
Thanks for Watching!
Especially for peoples that cant afford repairs! lol I say the same .
videos are awesome! Thank you
Thanks for the tips man. You make it easy peasy and save me money!
Thanks so much. The coupler was the fix! Took me a while, but from someone who knows nothing about washing machines, your diagnosis and explanation of how to fix it, was fantastic!
Good video, helped me fix my washer quick n cheap. Only took about 45 min start to finish if you watch the disassembly video w it. Only part I caught that he didn't explain was disconnecting the 2 wire assembly's attached to the motor before taking it off. Good video though very helpful.
Thank you for the great video - it enabled me to quickly fix my washer for just $10bucks! Was dreading buying a new one.
Bill your video was great, followed your instructions to a T, and worked perfectly, me any my cousin did the job in 30 min, Sears wanted to charge $275 for the job, we did it for the cost of the part which was $22. And this is the first time we worked on a washer, your Attention to detail was great. Thanks from Los Angeles.
Gabriel Felix Awesome Job! Thanks for the great comment!
I fixed it but after the second load, the washer start smoking, any idea what I did wrong? May be too tide??
Any help it’s much appreciated
Just wanted to say THANK YOU! Based off this video we diagnosed our Kenmore in 3 minutes, ordered the part you recommended for $8, waited a day for it to arrive, followed your instructions (took half an hour) and BINGO! We are back to washing!
Thanks so much, Bill! Used your video to fix my washer today. Saved me a fortune.
Thanks for the video.
I went to switch out my coupling only to find the old one was still in decent condition.
I put the washer back together with a new one to no avail.
Eventually I was able to get the spin cycle to work after moving the tub around and spinning the wash rod with my hand. Now the spin cycle engages sometimes but not others. If I move the tub I'm able to usually get it started... Ideas on what to do?
Check your clutch for slippage.
We have, I assume, a 110 model, as the model number starts with 110. The washer will spin but not completely engaged to give it a max spinning motion. ( I can get it to spin faster by forcing it to with my hand, but it never gets to a high rpm) Is this piece the culprit or is this a belt slipping issue? Thanks in advance and this video was great!!
Thank you much for posting this, very easy to do. Just ordered the part I needed and lets hope that is just it!
Thanks for making the video and sharing your knowledge. So helpful for reasonably handy folks who don’t have the experience to make repairs on their own.
I know this video is super old, but I have the same washer. Does it supposed to have a belt? I don't see one.
Would this type fail be accompanied by a smell of rotten eggs/burning rubber and would it prevent manual turning of the tub?
Checking back in here on this with the results of my own repair. The motor coupler was broken and the rubber disc degraded. This explains why the tub wouldn't spin as well as the smell. I replaced the coupler with one that had a metal insert for the motor and transmission shaft. So far, so good. Thanks for the how-to videos!
Seriously? knobs have nothing to do with belts
Thanks a million! In the last 7 days your videos helped me take apart and fix my kenmore dryer for free by slamming this piece on the counter! And my washer my ordering this $3 plastic part...I appreciate these videos so much!
BRAVO - you made this huge problem a lot smaller - Thanx for Producing and Posting this...
What if it only fails to spin after the rinse??? With mine the water drains but does not spin.
leif vatne I just occasionally have to shift things around to get it to spin, so not really. Sorry.
mine will wash and drain, but not spin. so I set it to the "drain and spin" cycle, and it seems to be fine for now... time will tell.
Bonnie Laporte mine will not spin , leaves clothes soaking wet .
@@debcribbs9373 mine too, just stop on spin, did you get your fix
لؤلؤ علاء نت لاة ل يءؤ
Bill, my kenmore washer will spin but is not spining all the water out of the clothes, what could it be, i check the coupler and it seem's to be ok but i did the test that you did on holding the cover switch down & changing the speed knob from slow to fast & it did not make any difference, sometimes when it gets to the spin cycle it will not spin & then the next time it will, i just don't get it. Thanks
Butch
For anyone else who may read this comment at some point, you should consider looking at the timer knob. Look for videos fixing that. If the contacts within the timer knob are corroded, they won't always connect and send power to the right parts of your washer.
Sally Croff same problem for me. Did you ever figure it out?
Mine too 😓
Exact same problem anyone find the fix
Sally Croff q
You are just an amazing teacher! I just watched your video and replaced my Kenmore washer coupler in just an hour for the very first time!
Your videos saved me a bunch of money. One of my kids socks sucked into the pump and jammed up the entire works. I was able to pull apart everything and diagnose it thanks to your video. Thanks so much!
Same washer, it does everything fills up washes but when it comes to spin it won't now my washer if full of water but won't spin. I can't hear it fake spinning but it just won't. Please help!
Change wire under cabinet plastic broken. Had same problem and was told to change it and it worked for me. Paid $52.00 and I did it with my dad
Did you find a tutorial for this ?
Mine is doing the same thing Eemoe Marie!! How did you get it to work?
@@almagonzalez1128 You need to fix the switch that get activate when the door is closed. A tie wrap will do the job.
Belt
I can't get the cover back on my washer but hey it's spinning.
Bill Newberry. You are awesome! You saved me a lot of money with this video. My motor coupler was broken just as you said it would be. I've ordered the part, and it will be fixed within two days from now. Thanks!
I am a 60 year old woman who repaired the washer with the help of this video! You saved me so much money! Thanks!
Thank you very much Sir
This is great. After watching the video I have ordered the part and received it in two days. Following your video it took me almost 2 hours to replace the coupler and now my washing machine is working. Thank you again and keep the good work. God bless
Bill your a life saver, Your video was exactly my problem, Took me 10 mins to get the broken coupler out. Thanks
God for youtube and people like you Bill that make our lives easier!! Thanks again, Isaac
Great video! Appreciate you taking the time. Victory of the Light!
Thank you AGAIN @Bill ... 2nd TIME Fixing our washer with the HELP of this VIDEO - R.I.P. Brother!
Thank you for this great video! Found out at 11:30pm last night that my washer broke and my work clothes were still soaking wet, not the expense you want to shell out the day after Christmas… Thanks to your video I was able to diagnose the issue and I got the part there next day, today, and I fixed it and ran the washer and it’s working great! Thank you again for information that saved my pocket book!
Thanks so much, Bill! Came home today to my old Kenmore 110 not spinning. Being resourceful and somewhat of a DIY'er I found your video after looking through a few others. Both the plastic couplers were broken. EXTRA points for link to the part on Amazon. I love you and I love the internet. My S.O. was already looking to buy a new unit. These old tanks cant be beat! Neither can you! Cheers! Time for a brew.
I just spent $7.00 to fix my washer. Thanks to you I avoided a hefty repair bill :) Truly appreciate it!
Thank you for posting this video! My Kenmore 80 series had the same problem. The motor coupling was sightly different than the one on the video but that is exactly what the problem was. It had 2 plastic pieces and one of them broke. Bought a replacement part at a nearby appliance parts place and problem solved! Thank you!
Thank you so very much for posting this extremely helpful video! We repaired our washer and saved a whole lot of money. Again, thank you so much for all your insight :)
thank you !!!! Saved a bunch of money and didnt have to switch to geico, thanks to you i was able to fix my washer without paying someone . Thanks for taking the time to make this video
This video saved me hundreds of dollars. Super easy and clear - $8 part to fix. Fantastic!
THANKS!!!!🙌This is exactly what happened to mine. Great vids, only took me 5 min to get the coupler out! Cheers!!!
Just popping in to say thanks to your videos I have repaired my washer. Thank you so much!
A couple days ago our kenmore washer stopped spinning. Yesterday my Dad and I watched your video and were able to pull apart and change the coupler and now our washer works again! Thank you for your video!
Thank you sir! Great video, saved me calling a repair man. God Bless!
greetings from Alberta, Canada! Thank you so much. Your video was very helpful
Thanks so much! This video was easy to follow and helped me fix my washer instead of replacing it.
I think I love you man! I was about to buy a new washing machine before I watched this! Saved me hundreds thank you
Dude you are the man! Saved me a ton of guessing. Ordering the part, and fixing it tomorrow.
Bill, thank you. You are a really good teacher. And, I know nothing about washers. Very helpful!