Pro tip!! If you dont have a drill you could do a controlled burn around the nail and remove the ash and then slowly and carefully extract the nail with tweezers so as not to damage the finish!
Since its a nail, not a screw, you could have turned it upside down, off the edge of a table so the nail isn't flat on the table, and whacked it with a hammer a couple of times. The nail would come out a bit, not be damaged by a whole saw, and you could have used your side cutter then to fully remove it.
How about using the claw prybar properly. Put claw in front of nail head… hit with hammer till it goes under nail hard and pry it out. Takes 5 seconds and less damage.
Гвоздодер можно забить в дерево рядом с шляпкой гвоздя (на видео как раз такой гвоздодер и есть) и выдернуть гвоздь и дырка от сего действия будет намного меньше той которую тут насверлили.
Alright. For those that realize the thing above is denser than an ass with sixteen Cs here’s how ya do it. Get a Flat head screwdriver, and get it under to make a little space for the pliers to dig in
Берешь молоток отвертку и деревяшку 1см на 2см примерно, в высоту 3см. Вбиваешь отвертку под шапку, под неё ставишь деревяшку и толкаешь вниз. И вуаля и изделие не сломанное и гвоздь за 0,4рубля есть
мне нужно снять и снова положить доски на пол, а гвоздь вбит в паз, так что мне такой способ может подойти, чтобы добраться до гвоздя, не испортя внешнюю сторону доски
Принстон с Гарвардом для этого кончать не требуется.😊 Мухосранское ГПТУ, в левой руке гранёный стакан, в правой руке газовый ключ номер 3 - И В ПУТЬ !!!🤣🤣🤣
Or you can use grenade for less damage
This video should be called 'how to remove wood from wood'
@@foodforthought2180 how to remove wood from nail
😂😂😂🤣
Literally laughed out loud
🤣🤣🤣🤣🇨🇵❤️
So the idea is to reuse the nail not tje wood? 🤣
You see the price of a nail today? He need it for an other video
@@mathieustralen481 The price of wood is way, way higher.
@@AlexanderZapataIndividualbut the nails a nail..
@@xjaymie_j3ossx but the woods a wood…
@@Stephen-es2gu hmmm.. we shall settle this in court…
Еще вариант бросить в костер, гвозди сами выпадут
😂
😂😂😂😂😂انت مضحك
Men of genius we meet again 👊🏽😂😭🤣😭😂
Нет, гвозди расплавяться, потом их нужно будет залить в форму для гвоздей и остудить.
😂😂
Pro tip!! If you dont have a drill you could do a controlled burn around the nail and remove the ash and then slowly and carefully extract the nail with tweezers so as not to damage the finish!
With tweezers...? You gonna pull a nail with fucking tweezers? You already burnt it. The finish is fucked.
Master class on how not to use a cats claw properly.
@@joshh6059 it's probably because your a Josh. The greatest minds think alike. Josh²
Неужели больше идей не было, я бы показал вариант идеального выдергивания без дрелей и других сложных инструментов
Нет, это слишком сложно для них самих😂
Nobody could ever think about what you've done, you have given a gift to humanity
😅😅👍🏻👍🏻
This is a perfect video. I always have issues trying to separate nails and woods before I throw both of them in the trash. This video helps a lot.
What should we do if we shouldn't damage the board please reply
Мастер-класс как раздолбать деталь ради одного гвоздя
Set fire to the wood and wait for the wood to turn into ashes then you can simply pick the nail up?
То самое чувство когда разебал пол доски что бы достать гвоздь!
@Jonathan Walensi Why are you?
Агп, когда гвоздь был нужнее доски или мебели)
Now I can say ( you nailed it) 😂😂
Since its a nail, not a screw, you could have turned it upside down, off the edge of a table so the nail isn't flat on the table, and whacked it with a hammer a couple of times. The nail would come out a bit, not be damaged by a whole saw, and you could have used your side cutter then to fully remove it.
Nikalne se kya kar lia?
Thank you for the lesson!
I would typically use the fork on the back of a hammer
Can someone tell me the name of that tool? the one that goes on the drill please ?
А если тебе нужна эта доска например для починки лестницы ,?? Ты ее будешь с дыркой ставить? Или все токи будет пытаться его выдернуть?
How about using the claw prybar properly. Put claw in front of nail head… hit with hammer till it goes under nail hard and pry it out. Takes 5 seconds and less damage.
слава богу гвоздь в порядке
hiii
О, я так же делаю. Только телефон молотком ломаю, чтобы достать симку из него
Гвоздодер можно забить в дерево рядом с шляпкой гвоздя (на видео как раз такой гвоздодер и есть) и выдернуть гвоздь и дырка от сего действия будет намного меньше той которую тут насверлили.
И мусора поменьше будет
Although it causes damage, though not as much, hammer the cats paw into the wood right next to the nail, enough to be able to leverage the nail out.
I just feel like there's a tool to pull flush nails out of wood faster with less damage
Yea he used it before the pliers, it's called a nail puller lol
ну вот же он! контент, который мы заслужили)
Well that was harder than it needed to be.
We can use hammer for remove if..
He REEAALLYY WANTED THAT NAIL HUH ?!
Dude there is a product called hammer which can also remove nails instead of putting it in.
Screw driver just left the chat
Bro it's a nail
Lmfao it’s a nail
Is this 5 minutes craft wood
why not just use the back of a hammer
ここまでやって良いならなんでもありでしょ。
Waiting on that Funk fpv reaction.
Awww darn I have a lot of nails in my wall. Guess I need to get them out
Próximo video, como reparar el hole
周りの木も道連れなの草
Nice try
Is this a hack or....?
Remember switching your side arm is faster than reloading
Bai aapke pass konsi bike hai
Or you could use the proper tool. A crow bar. No need to destroy the wood.
They straight up used the cats paw after ruining the wood 😂 could've just used that in the first place and skipped two or three steps
@@Jack-OfAll-Tradesexactly my thoughts. 🤔
Hey Funk, got another one for ya.
I was actually thinking about doing this to some pallet 2x4s
Comes in with a cats paw at the end lmao
Like theres a reason why a cats paw is built to be used like a chisel this is just stupid
What is the purpose of getting to the Nail out
Thank you. My life is mow complete.
Ich wusste garnicht das das auch so kompliziert geht😂
The second to last tool and a hammer was all that was needed and you wouldn't have f'd up the wood. Must be an engineering graduate.
I love these videos, the roasts in the comments are delcious.
You nailed it...🙄😌
Alright. For those that realize the thing above is denser than an ass with sixteen Cs here’s how ya do it.
Get a Flat head screwdriver, and get it under to make a little space for the pliers to dig in
Это когда гвоздь важнее изделия
Must expensive nail ever
Берешь молоток отвертку и деревяшку 1см на 2см примерно, в высоту 3см. Вбиваешь отвертку под шапку, под неё ставишь деревяшку и толкаешь вниз. И вуаля и изделие не сломанное и гвоздь за 0,4рубля есть
thats what the cats claw is for
So you use the hammer to hit the nail in but aren’t smart enough to use the back of the hammer to pull the nail out
You used a hammer to put it in there and it just so happens that hammers usually comes with a tool that takes nails out
So you’re just trying to save a nail instead of the wood?…
Bro when was the last time someone used pliers or wire cutters to pull up a nail, just use a claw hammer
Нихуа, теперь только так буду делать
違うそうじゃない
木を傷つけないやり方じゃないんかよ
Worst tip ever could of save the wood 😂😂
Cat’s paw would’ve worked without the drill or chisel in the first place and caused less damage.
Lmao you could literally just use a cats paw. It’s what it’s designed for.
It was enough from adobe to pull a flat screwdriver and screwdriver to nail and use the screwdriver as a lever
Could’ve just used a nail puller to begin with instead of ruining the board.
спасательная операция гвоздя☺️
How to annoy a professional. Please stay away from me, youre making actual tradesmen look bad
This is what a cats paw is for.
Or just use a cats paw and hammer it into the wood under the nail head and pull it out, then you don't have to drill a huge hole in the wood...
There are MUCH BETTER ways to retrieve a nail without damaging the wood (or anything else for that matter) so much. 🤦♂️🤦♂️
못 머리쪽 아래에 들어가게 - 드라이버 툭치고 밑에 뺀치로 지렛대 해서 살짝 뽑고 나머지 빠루로 뽑으면 될걸
POV: you're witnessing the entirety of Russia and Asia getting mad at a video
мне нужно снять и снова положить доски на пол, а гвоздь вбит в паз, так что мне такой способ может подойти, чтобы добраться до гвоздя, не испортя внешнюю сторону доски
There are much easier ways that will do less damage and require less tools.
Who in the hell picks needle nose as their first choice for removing a nail.
2 tools hammer and a flat head use the hamer to force teh flat head under the screw adn then pry out
Вопрос, если есть стамеска, накой запиливать? Чтобы потом всё "ровненько" заделать?
Not to be rude haha but you've never been in construction
Use a nail puller instead maybe? That just took so long for no reason
Кусачками не судьба вытянуть немного?
bro you just messed up the wood 🤣🤣 get another nail and hit the first one in more, then fill it
Poor PLninja, he took his video and wasn't even subscribed
If you were going to end up using a cats paw anyways then…. Why?…
No just not 🤦🏻♂️ a small thin crow bar works better and way less damage
You had the right tool at the very end.lol
Принстон с Гарвардом для этого кончать не требуется.😊 Мухосранское ГПТУ, в левой руке гранёный стакан, в правой руке газовый ключ номер 3 - И В ПУТЬ !!!🤣🤣🤣
Better idea. Burn the board and sift the ashes to find the nail
多分言ってはいけないんだろうけどSバール使った方が早いと思います
"How to remove nails from wood" - Removes wood
You have a cats claw
Why not just use that in the first place instead of using a drill
Just use a cats paw and you will do far less damage
They told me not to hit a nail puller with a hammer...
Oh that's friggen hysterically bad! Next up, chainsaw window cleaning...
@FunkFPV time...
И для н потом этот брусок будет нужен? С такой дыркой
Waiting for Funk FPV to react to this
くっそ手間かけてて草
so, u know that fork on the back of the hammer
what good is the board now.