Yamaha front brake jam repair | Caliper seal kit | Fzs disc brake piston jam |
Вставка
- Опубліковано 16 лип 2024
- Yamaha front brake jam repair, Caliper seal kit, Fzs disc brake piston jam: In this video, Yamaha fzs v2 front brake jam problem is solved by changing the caliper seal kit and a tutorial for restoring the Yamaha Fz disc brake repair. #caliperseal #brakecaliper #yamahafzsv2
👉Detail Process:
Friends whatever brand of motorcycle you have, If your motorcycle has a disc brake on the front wheel, Sooner or later you will definitely face the problem of a wheel jam.
In this video, I have discussed step by step how you can rebuild the brake caliper like new.
👉Tools:
1.10 number 11 and 12 number spanner
2. You can use a hex socket also
3. One screwdriver one plier
4. Caliper seal kit
5. brake oil to top up
6. Kerosene or any other petroleum cleaner
7. used toothbrush
8. cotton clothes
👉Process:
1. Using 10 and 12 spanners open the caliper from the wheel.
2. Disassemble the brake pads
3. Remove O Ring oil seal and dust pad
4. Clean with kerosene or petroleum cleaner
5. Install the new caliper seal kit, apply some brake oil to lubricate
6. Install the brake caliper assembly
7. top-up brake oil tank
8. Bleed brake oil to avoid air on the braking system.
9. Pump the brake until it feels hard and effective.
Yamaha Fz brake oil change:
👉Step 1: In the oil tank lid you can find the instructions on which brake fluid you need to pour. You may buy Dot 4 brake oil from “YAMAHALUBE” which costs Rupees 150 for a 100ml bottle or Dot 3 fluid from Castrol company also Rupees 200 to 250 for 500ml.
👉Step 2: In the second step, we need the help of a pipe which you can easily find in the hardware shop only for rupees 10 for a 1 or 2 feet length pipe. And we need to set this pipe to this caliper oil extraction bolt. Because brake fluid can damage the paint of the vehicle. If you don’t have a pipe then make sure you clean the area with water immediately.
👉Step 3: This step is very important but it is very easy also, just need to concentrate only. For this process, we need a number 11 spanner or wrench. Before losing this bolt, we need to pump the brake at least 5 to 6 times, and remember at this point we will not release this brake liver. now in the caliper fluid bolt, we will lose the bolt, and oil will automatically flow. then tighten the bolt and release the brake lever. In this process, air bubbles will not occur in the braking system. Also, we need to pour “DOT 4 or DOT 3” oil as per your liking. Though the process is time taking we need to apply the process 10 to 12 times so that the braking system totally drains the old brake fluid. Then after checking the max and min level of fluid in the tank we will tighten the lid. and the job is done.
👉FAQs covered in the video:
How do you fix a jammed bike brake?
How do you fix a stuck brake disc?
Why are my disc brakes jammed?
How do you get a stuck brake off a motorcycle?
What do I do if my caliper piston is seized?
Can you drive with a seized caliper piston?
What causes caliper pistons to seize?
How long does sealed brake fluid last?
Why must DOT-3 brake fluid be kept in a sealed container?
What is the life of brake oil?
👉Topic: Yamaha front brake jam repair
👉Topic discussed:
yamaha front brake jam repair
caliper seal kit
fzs disc brake piston jam
yamaha front brake jam removal
yamaha fz disc brake repair
fzs front disc brake problem
yamaha fzs v2 front brake jam repair
fz disc brake jammed
caliper seal replacement
caliper piston seal replacement
caliper piston seal
brake caliper seal kit
caliper oil seal
yamaha fzs disc brake piston jam
how to fix a jammed disc brake
bike disc brake piston stuck
disc brake piston jam
caliper repair kit
caliper seal leaking
caliper brake repair
Timestamps:
00:00 intro Yamaha fzs v2 brake jam
00:27 tools to fix jammed disc brake
00:48 Yamaha front brake jam removal process
01:38 disassembling caliper
03:55 cleaning brake caliper
05:02 Caliper seal kit
07:45 fitting the caliper
08:30 brake fluid bleeding
09:38 conclusion Yamaha fzs v2 front brake jam repair
#caliperseal #brakecaliper #yamahafzsv2 #brakejam #brakepiston #caliperpiston - Авто та транспорт
Regular lithium based grease should not be used for brake caliper, it will get thinner when caliper gets hot and will react with the rubber dampers and reduce their life.
The silicone grease is used for this purpose.
Great job 👍👍
Thanks for the visit😀
Very nice video 👍
Bhai ye CALIPER SEAL KIT nai mil raha hai iska koi alternate hai kya ?
Konsa brake oil??dot 3 hena?
what hell all clean with brake cleaner or use just brake oil
Bhai o rings baher hi nahi aarahe hai
Fzs v3 , Mera front break jam hora hy thoda chalanaki bhat ,dick heavy heat bhi hoti hy , tho yese karnase tk hongi kya ? Workshop per lekar gayatho bola showroom per denako , Kq ki front back break connected hy isleya pressure ki problem aaynki ki...
why didnt u show how to press piston in bro that was important
Bro will pulsar caliper seal suits fz caliper
Bro process same hoga, but caliper seal kit apko bajaj spare parts shop se kharidna parega.
@@UtopianDays bro i am asking can i install pulsar 150 caliper seal on fz
i have same issue in my bike mt15 but rear break bro so plz can you give me the part number (rear break caliper oil seal) for my bike and upload 1 video how to change oil seal kit.
love from 🇳🇵
Hi Prakash, the asking part number is 4ESW00470000, Stay tuned bro I will try to upload the video.🙂
The front brake of My R15 v3 is getting soft sometimes and sometimes hard....what will be the problem!
Its the master cylinder piston problem. Change the piston kit which is in near brake lever. Also drain out the old oil and fill it with new. There are videos about changing piston, watch and do it urself.👍
@@gokukn2336 Is master cylinder piston available for R15 v3? I had gone to yamaha showroom and they said I have to change the full brake system....
@@terrencemckenzie4316 No need. Piston kit comes around 400rs only for v3. Tell them to change the Piston kit only or do it with local trusted mechanic. If you find the problem still exist, the Rubber orings, and side two rubber parts comes in Caliper needs to be change.(its better you change them to new too, while changing the piston kit, so its time saving). These rubber parts comes around some 150rs. Its better you buy those things give to local mechanic. Also buy silicone grease to use on rubber parts, normal grease not good for them. Watch videos for your bike Piston change, caliper repair, you will get an idea.
@@terrencemckenzie4316 These disc brake system almost same for all bikes. I do it myself nowadays, after getting frustrated with these mechanics careless works. you need some T spanners, ring spanners, Circlip plier tool, and some silicone grease, if you are going to do it urself.
@@gokukn2336 Such a great information 👏 👌 appreciated it....Lets see if i get master cylinder kit or not
මගෙත් රොදෙ හිර වෙලා
Hi R uk, වීඩියෝව අනුගමනය කර ඔබ විසින්ම ගෙදරදීම අලුත්වැඩියා කරන්න සහෝදරයා, එය ඉතා පහසුයි.🙂
i also faced the same issue...disc pad jam so in showroom they charged me 3 thousand for disc caliper, please tell me about this?
Sir thank you so much for useful informative video