David Sevostyanov don't assume nails are meant to hold down shingles temporarily the tar sealant which is activated by heat from the sun is the most important part to a shingle roof system
Mohawk Guy....I am a mature Woman and i have skylights on my roof.....one of them has been a pain in the......but i must say it is located on a flat roof......many (four times different people have come to repair it promising it will not leak again) and now i feel i have acquired some knowledge......and i feel the way your are doing it is not going to be very good.....you need to research some more to acquire better knowledge......Thanks for the effort......
No, two or even three inches is good. It fills ups with leaves and debris, you need some room up there for it to wash out. If it’s just a half inch or so it get packed in there and creates a damn, it can then spill over the sides of the flashing. You want to see a nice gap on the flashing all around and let the water flow away and out the bottom!
![[FULL] Skylight Flashing Tutorial | Headwall, Step Flashing, Saddle Flashing, Counter Flashing](http://i.ytimg.com/vi/cWpXa-PL-Pw/mqdefault.jpg)
![[FULL] Skylight Flashing Tutorial | Headwall, Step Flashing, Saddle Flashing, Counter Flashing](/img/tr.png)
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Why not leave a 1/2 gap along the sides for water to run along, it doesn't have to be that tight
Thanks man you deserve much more likes.
Looks good to me man good work
I want to learn how to install roof and measurement but am in Nigeria any possible way?
love those highlanders
Form it flat before installing so u don't have to nail the roof side
Damn. I will show you how to flash a skylight my friend.
Seems like to me that the wind will blow right up underneath the top shingle since he didn’t nail it down 12 inches up
David Sevostyanov don't assume nails are meant to hold down shingles temporarily the tar sealant which is activated by heat from the sun is the most important part to a shingle roof system
That tar system was cot off seal it down
Mohawk Guy....I am a mature Woman and i have skylights on my roof.....one of them has been a pain in the......but i must say it is located on a flat roof......many (four times different people have come to repair it promising it will not leak again) and now i feel i have acquired some knowledge......and i feel the way your are doing it is not going to be very good.....you need to research some more to acquire better knowledge......Thanks for the effort......
why do you leave such gap at the top,i always leave 1/4 or so but no more,makes no sense to me to have gap that big.enlighten me
No, two or even three inches is good. It fills ups with leaves and debris, you need some room up there for it to wash out. If it’s just a half inch or so it get packed in there and creates a damn, it can then spill over the sides of the flashing. You want to see a nice gap on the flashing all around and let the water flow away and out the bottom!
Wrong in so many ways. 3 inch stager nails to close to seems. Guess it doesn't rain there lol
What’s wrong with a straight line for that cut, hack city
Lmao!!
#0
WRONG!
WRONG NOT GOOD
How so?
Thank you 🫱🏼🫲🏽🪄👐✅️
That shingle cut above the skylight is quite possibly the worst I e ever seen