Regarding my machine (Beko WTK72011W), all components have tested OK What I am now doing in between loads, is turning the machine off (but still powered) and pressing and holding the start/pause button to reset the programme So far this has meant the machine hasn't stopped like I have experienced so far But as you know yourself, an intermittent fault can be very difficult to diagnose, but at least my machine is continuing to function so far, I am loathed to get rid of it, it is only 2 years old and it should last for a considerably longer amount of time Thank you for responding to me however and giving the advice that you have done and that you continue to do on your channel, you are a credit to your profession
Okay, hope you're having a good weekend. I've managed to find you a workshop manual on this machine but I do not have your email so if you contact us through the website make sure you address it to me Paul and I can send it over
There's also one useful tip when diagnosing newer washers. Many manufacturers from Electrolux, Bosch all the way to Samsung started cutting costs, so in order to save around 0.5m of copper wire they added the heater to the main power circuit, it used to only contain the PCB and door lock, but now also heater has to be checked if the machine starts doing completely random stuff. So if someone has an issue of washer "constantly clicking" the door lock or the display turns into the disco ball of flashing lights, usually it's not an issue with the PCB or the door lock but with the broken heater unit. If the washer engages the door lock as soon as we connect the mains cable, that's where we know the CPU is dead, and new board has to be ordered.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Checking carbons every couple of years? ... My 2005 Candy's original carbons lasted 15 years, and the machine recently died at 19 (suspected spider failure). I've got a Hisense Inverter now. Bet it won't last 19 years? It's beautifully quiet, and clean! Incidentally, I was surprised to find, unless I'm much mistaken, that the inverter PCB is integrated into the motor itself. There's definitely a PCB at the back of the motor. I've just bought a Spin Dryer, to cut down drying time. Not seen one since my mother's 70s Hoovermatic Washdog Twin Tub!
I appreciate that! And totally humbled. I only tried to teach in a way that everyone understands. My videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @aerosoapbreeze264 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Regarding my machine (Beko WTK72011W), all components have tested OK
What I am now doing in between loads, is turning the machine off (but still powered) and pressing and holding the start/pause button to reset the programme
So far this has meant the machine hasn't stopped like I have experienced so far
But as you know yourself, an intermittent fault can be very difficult to diagnose, but at least my machine is continuing to function so far, I am loathed to get rid of it, it is only 2 years old and it should last for a considerably longer amount of time
Thank you for responding to me however and giving the advice that you have done and that you continue to do on your channel, you are a credit to your profession
With a compliment like that, I think I need to go and find you the workshop manual. Keep an eye on your chat. I will see what I can find for you
Okay, hope you're having a good weekend. I've managed to find you a workshop manual on this machine but I do not have your email so if you contact us through the website make sure you address it to me Paul and I can send it over
There's also one useful tip when diagnosing newer washers. Many manufacturers from Electrolux, Bosch all the way to Samsung started cutting costs, so in order to save around 0.5m of copper wire they added the heater to the main power circuit, it used to only contain the PCB and door lock, but now also heater has to be checked if the machine starts doing completely random stuff. So if someone has an issue of washer "constantly clicking" the door lock or the display turns into the disco ball of flashing lights, usually it's not an issue with the PCB or the door lock but with the broken heater unit. If the washer engages the door lock as soon as we connect the mains cable, that's where we know the CPU is dead, and new board has to be ordered.
thanks..
These videos are a life saver, thank you very much sir!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Checking carbons every couple of years? ... My 2005 Candy's original carbons lasted 15 years, and the machine recently died at 19 (suspected spider failure). I've got a Hisense Inverter now. Bet it won't last 19 years? It's beautifully quiet, and clean!
Incidentally, I was surprised to find, unless I'm much mistaken, that the inverter PCB is integrated into the motor itself. There's definitely a PCB at the back of the motor.
I've just bought a Spin Dryer, to cut down drying time. Not seen one since my mother's 70s Hoovermatic Washdog Twin Tub!
You are extremely underappreciated!!!!! Thank your for this excellent content
I appreciate that! And totally humbled. I only tried to teach in a way that everyone understands. My videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @aerosoapbreeze264 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
4158 solve the problem
Thanks for this. Excellent information.
4158 write on the machines
thanks for the video..