The model 1841 rifles and the model 1891 Krag rifles are considered the most beautiful, and highest quality arms ever purchased for the US Army. Nice rifle! 🙂
I’ve always wanted a Harper’s Ferry rifle, though I have owned many flint lock and percussion rifles I have never had a HF rifle… maybe someday… Great video and beautiful rifle. 👍
You might want to make a small flash guard/shield to protect the wood behind the nipple when the gun is fired. You can cut about a 1/4" square opening toward one end of a 1 inch long X 5/8" wide elliptical piece of sheet aluminum or brass that fits over the nipple. It will stop the charring of the gunstock right behind the nipple.
I have a Euroarms 1841 .58 cal. that shoots well with a .570 ball seated with a .015 lubed patch over 45 grs. of BP @50 yds. Did you shoot .575 Minie bullets thru your Bobby Holt barrel?
I have a Euroarms .58 cal. 1841 Rifle. It likes to be fed .570 balls using .015 lubed patches over 45 grns of BP @ 50 yds. Was your Bobby Holt barrel used to shoot .575 minie bullets?
I believe you mean Bobby Hoyt. I just got a jaeger rifle built by Ron Scott and Hoyt made the barrel. 58 cal gain twist and it produces cloverleaf groups. His work is second to none
(Mike Cullum) I've owned a 54 cal replica 1841 rifle for more than 25 years. It was my Arizona muzzle loading hunt rifle for many years. 90 grains of FF Goex with a Hornady Great Plains bullet. I took 6 elk with that rifle including a nice 6X6 bull. Really enjoyed this series on the 1841. Great memories!
Very nice example, have you made a episode about import laws of original examples? The topic is of great interest, are auction houses practical... what are the laws and fees? If this a sensitive topic I understand, it is a day dream of mine to make more original examples of American antique arms available for European collectors.
I would bet this system was dry balled more than we think, pounded down over the charge? If I get my hands on one? I tried it over my 62 but how inportant is the balance of speed or how fine on target?
I just got a replica made by pedersoli. Unfortunately the rifling deph and twist rate is not ideal for roundball loads. Also the ramrod that came with it is a bit shorter and thinner than orginal. Ordered correct reproduction and with a bit of work it fits and works great. Cheers from the U.S.A.
There will a paper published about the Mississippi rifle later in English, with proper citation of all the primary and secondaíry sources I used. It will be accessible on my patreon page. It iwill be detailed like these other background documents I already uploaded: www.patreon.com/capandball/shop
Yes the American system was more dedicated to a contract system. Look at the episode for the Hall breech loader. When repairing original examples the different examples vary a great deal with parts being hand fitted to each fully finished rifle. The variances diminish around the 1840's and almost disappear in the 1850's. The M1861 Springfield and contract examples are fantastic for standard parts interchange. The closing statement around 25:00 says this and is very consistent with what I personally encounter on original arms here in the States.
Do you think? the original ram rod matters much? I wonder if that weighted sqash head tipped ran rod mattered on the "as designed" or historic lead balls. THANKs AGAIN! Again! Keep your smoke poles SMOKING!
Good Sunday morning to everyone ✝️ Appreciate the video 🎯💥 Remember everyone through this life seek Jesus Christ in your life and heart daily. For He is the only true answer through this life and evil world we live in. ✝️🙏💪
The model 1841 rifles and the model 1891 Krag rifles are considered the most beautiful, and highest quality arms ever purchased for the US Army. Nice rifle! 🙂
M1903 Remington is a contender.
The M1855 - M1863 are my favorites, the lines are very graceful.
Best "black powder" channel on UA-cam by far. Köszönöm szépen.
I’ve always wanted a Harper’s Ferry rifle, though I have owned many flint lock and percussion rifles I have never had a HF rifle… maybe someday…
Great video and beautiful rifle. 👍
As always, excellent information and demonstration. Thank you.
You might want to make a small flash guard/shield to protect the wood behind the nipple when the gun is fired. You can cut about a 1/4" square opening toward one end of a 1 inch long X 5/8" wide elliptical piece of sheet aluminum or brass that fits over the nipple. It will stop the charring of the gunstock right behind the nipple.
Excellent as always 👌 thanks for sharing
Always thoroughly enjoy your expertise and historical firearms discussions. Thank You Good Sir! FMR Intelligence Officer
I had an 1841 but it was a copy of the 1855 arsenal rework in 58cal I built on a Bobby Holt barrel for NSSA matches. Unfortunately I sold it.
I have a Euroarms 1841 .58 cal. that shoots well with a .570 ball seated with a .015 lubed patch over 45 grs. of BP @50 yds. Did you shoot .575 Minie bullets thru your Bobby Holt barrel?
I have a Euroarms .58 cal. 1841 Rifle. It likes to be fed .570 balls using .015 lubed patches over 45 grns of BP @ 50 yds. Was your Bobby Holt barrel used to shoot .575 minie bullets?
@@robertrobert7924 yes I did
Bobby Holt !!! Legend.
I believe you mean Bobby Hoyt. I just got a jaeger rifle built by Ron Scott and Hoyt made the barrel. 58 cal gain twist and it produces cloverleaf groups. His work is second to none
(Mike Cullum) I've owned a 54 cal replica 1841 rifle for more than 25 years. It was my Arizona muzzle loading hunt rifle for many years. 90 grains of FF Goex with a Hornady Great Plains bullet. I took 6 elk with that rifle including a nice 6X6 bull. Really enjoyed this series on the 1841. Great memories!
Thanks for more excellent content! Good firearms history content is hard to come by.
...sokáig éljen magyarorszag...nice episode , once again!!!😀
Very nice example, have you made a episode about import laws of original examples? The topic is of great interest, are auction houses practical... what are the laws and fees? If this a sensitive topic I understand, it is a day dream of mine to make more original examples of American antique arms available for European collectors.
i would suggest using a 54 caliber ball (.533) instead of the a 52 caliber and patch
I am replicating the original cartridge, and that was made with .525 roundballs.
I would bet this system was dry balled more than we think, pounded down over the charge? If I get my hands on one? I tried it over my 62 but how inportant is the balance of speed or how fine on target?
Wow!!! Nice brother ❤❤❤
I just got a replica made by pedersoli. Unfortunately the rifling deph and twist rate is not ideal for roundball loads. Also the ramrod that came with it is a bit shorter and thinner than orginal. Ordered correct reproduction and with a bit of work it fits and works great. Cheers from the U.S.A.
DO you have a video showing the actual work you did in some format? Also, will you show us the sources you use somewhere? Thanks. Very nice.
There will a paper published about the Mississippi rifle later in English, with proper citation of all the primary and secondaíry sources I used. It will be accessible on my patreon page. It iwill be detailed like these other background documents I already uploaded: www.patreon.com/capandball/shop
That is what I was hoping for. Thanks
Do you make a distinction between interchangeable parts and the "American system of manufacturing"?
Yes the American system was more dedicated to a contract system. Look at the episode for the Hall breech loader. When repairing original examples the different examples vary a great deal with parts being hand fitted to each fully finished rifle.
The variances diminish around the 1840's and almost disappear in the 1850's. The M1861 Springfield and contract examples are fantastic for standard parts interchange.
The closing statement around 25:00 says this and is very consistent with what I personally encounter on original arms here in the States.
I honestly wish i had a father like you sorry if this sounds weird.
You've got to ask my kids about this. :D
Do you think? the original ram rod matters much? I wonder if that weighted sqash head tipped ran rod mattered on the "as designed" or historic lead balls.
THANKs AGAIN! Again!
Keep your smoke poles SMOKING!
👍👍👍👍
Hungary is a beautiful country. It's also one of the last bastions of reason in Europe.
Don’t forget Poland!
@@RiverRat1953 Yes sir!
Maybe don't bring politics onto this beautiful channel? There are plenty of other places to pick the fights you want.
Sounds like Eli was good at promising the world and worrying about it later.
Yes, let's call it enterpreneur. :)
Just use a wooden knob on the ramrod and seat the ball with a strong push.
Why bounce and screw around with some silly ramming??
Good Sunday morning to everyone ✝️ Appreciate the video 🎯💥 Remember everyone through this life seek Jesus Christ in your life and heart daily. For He is the only true answer through this life and evil world we live in. ✝️🙏💪
naw fam
So true! 😊