Flushing transmission without using pump, less than 10 minutes/flushing automatic transmission fluid
Вставка
- Опубліковано 31 гру 2021
- This video is about Flushing transmission without using pump, less than 10 minutes
Complete transmission, oil flush for any car
Easy way to complete transmission fluid change (Flush) in 10 mints without using any pump
Procedure
1. drain from transmission pan cap
2.fill it with 3.5 liter new ATF OIL
3. disconnect the outlet hose of transmission oil cooler and connect it to tube and put the other end in a gallon
4. start the till 2.5L comes out and then stop the engine
5. Refill it with same amount ATFthat came out recently and check the level,it should be at cold (C) area
6.turn the engine on and let it get worm to operating temperature and shift the gears to all positions then check the level, it should be at hot (H) area, if it wasn't, fill it up till it gets there
Car been working on: TOYOTA Camry 2011
ATF type: ATF IV: ATF4
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon EOS M50 Mirrorless: amzn.to/35BdSsU
DJI Ronin-SC - Camera Stabilizer: amzn.to/3wINHwm
Andoer 3-Wheels Wireless Remote Control Motorized Camera: amzn.to/3vDuf2D
Gopro Max 360: amzn.to/345NNTf
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh - Авто та транспорт
I've been working on my own cars for 8 years and learn from UA-cam videos. No one does it as easy and as well as you. Thank you very much.
Thanks, appreciate that, I'm glad that my videos helpful and easy to understand
Best explained on UA-cam on this topic
Thanks James, appreciate that
What size of hose did you use on the return line?
Loved the video,Easy to follow, thanks
Great to hear! Thanks
I did the injector s like you.. so far good results wondering if it's bad for the injector plastic or is it made of plastic.. inside the injector . You are a truly talented Chief .
Brilliant ! Thanks for sharing !
Thanks for watching
Awesome video man thank you
Glad you enjoyed it
This is the Best way , good job 👍
Thanks for watching
Nice and easy way thanks mate
Glad it helped
Great video. Thanks
You are welcome!
Thanks AliMech...
Very good instruction video! I usually buy 1quart more to use to purge out oil fluid. But the rest is about the same!
Thank you!
@@AliMECH Isn't it bad if the transmission and car is temporarily running without any transmission fluid?
@@whatitisnt. i think new oil goes into the transmission. the ones got sucked up is the old oil in the pan. usually when we change atf oil they just drain out the oil in the pan. so 60% of the oil is still in the transmission.
Very nice, good work
Thank you! Cheers!
Great idea
Thanks for watching
Good job. Never saw such a procedure before.
Glad you liked it!
Waoo, That easy ?? Thanks boss
Thanks
Holy Shit. This was so simple and amazing. Thanks Ali!
Thanks, glad it was helpful
good idea
Many thanks
I do mine this way for years.
That's great 👍
Thank you so much that it I need you show it again?
I will
I see a couple of problems with this. The car in this video has a drain plug for draining the transmission fluid. Many cars do not have this drain plug. Mine is one of them. Also, you did not replace the oil filter with this procedure. If a car doesn't have a drain plug, you have to remove the transmission oil pan or suck it out the fill tube. Removing the pan will also give you access to replacing the oil filter.
Thank you Alimech for the nice video. What spray did you use to clean the drain bolt?
Thanks, I used carb cleaner
can i just put the gear to "P" position instead of turning off the engine? ive heard if u put ur gear into "P" the trans will stop running therefore itll also stop pumping the atf
Hi,
Do you know where are the transmission coolant lines located on a Citroen c4 (2007) i couldn’t find them connected to the radiator ? Perhaps had the Citroen it’s own oil cooler radiator?
Thx
alimech, where is the oil transmission cooler line on a 2017 toyota Camry le ? good video! Thank Larry
Thanks Larry, It should be at the same location
Simple process, well described - thank you for sharing! If this is what shops do when they sell you a "transmission flush", I don't understand the many people who say that it damages the transmission. How can your method of flushing stir up any more sludge/particles than normal driving? Specifically, if you drain even smaller amounts of fluid in more intervals? I expect shops do transmission flushes differently - any comments?
i think they do it differently
That's a great great video
I have a question
I put 16oz of blue devil transmis sealer in my trans thru dip stick
Bcz I had little leak somewhere near pan dripping
Instead of putting 1oz as recommended I poured full bottle 16oz and drove 15 miles
Is their way I can flush it
I will really appreciate
Or
I need to flush out all three engine oil
Coolant and transmission fluid
I will appreciate your reply
Hi, which Mannol product exactly did you use and were you happy with it? I see in newer videos you used original Toyota ATF, is the extra money worth it in your opinion did you have any issues with Mannol ATF? Thanks.
Great video! How do you recognize the trans hose that goes to the cooler? Mine has some metallic hoses that have letters on it but the ma yak doesn't explain what they are.
I always put a transparent hose between one of the hose to know the direction of the fluids
I’m going to do the same thing on my Saturn Vue
🙏
How about drain the old fluid then fill it full with new fluid and after may be 50 miles run then drain it again and fill full it again with new oil and that's it...
Your awesome Aimech ! ..Happy New Year ! ... this will work the same for 2010 toyota corolla ? what about the filter ?
Thanks, happy new year, yes it will work, for the filter you need to remove the drain pan for replacing the filter before adding new fluid
@@AliMECH Thanks !
I tried this on my 2014 Kia Soul and hooked my hose to the upper cooling line that came out of the radiator. The fluid I drained out of the pan was real dark but when I started flushing it not so dark. Hope I was flushing the old fluid out and not the new fluid I just put in. Does it make a difference what cooling line you use as long as its pumping fluid out? Im a little confused about what line to drain it from. Thanks, Dan
You did right. This method you also flush out the atf in the cooler.
Just wanted to ask, what if i want to change the transmission filter.
Actually my transmission started heating up. Now my engine starts but the car doesn't drive in Drive or Reverse. Can i try changing fluid and try if it works.
can i do this without turning on the engine? for example by turning the driver side wheel?
Wish i could find one video that can show how yo refil it from the 24mm bolt at the bottom. Not all cars have this fill system from the top
How do you account for the expansion of the fluid when the temperature goes up? Are you only concerned about the volume you draining? Can you use this method on cars without dipstick on newer models? Thanks
There a method to this but you have to have a pump. I done my but it was complex.
I prefer to drain and fill on my 2009 seal transmission. Of course doing the drain and fill extra amount into the fill hole and then warm up the car. Shift D and N back and forward until I get a solid D and drain until it trickle.
This process is much easier and safer for me. I almost fucc up my transmission by doing the pump in and drain out method.
Wait for it to cool down and add the corresponding amount
He measured whst came out. Wstch!
Will this work with a 2014 Nissan versa 1.6s it's a cvt transmission
Hello, I did the drain and refill 1 week ago. How long it usually takes for the ATF get mixed? My old atf had a burnt smell and was a bit thick...2007 solara 2.4.
how did it go afterwards? still holding up?
is it possible to do it for an Multitronic (type 0AW) ?
Nice video. One question, why drain the TF first and then do the flush? Isn't the flush going to remove all the fluid from the transmission?
Because you want to get rid of the heavier sludge at the pan, that doesn't circulate as well.
Great, simple and well explained video. Thanks for uploading.
A doubt: What happens if I flush out all the fluid till the transmission is completely empty instead of flushing out 2.3L?
Running transmission dry most of the time cause damage to the clutchs
@@AliMECH thanks Ali, that's a valuable information there!
do you know if i would be able to do this on a 06 Acura RL
So 1992 civic eg auto same the process ?
There's 2 hose lol
That’s fine if your car has a transmission drain plug…..most don’t. Also, I understand this is only about a flush however the filter should be replaced and the magnet cleaned.
Alimech pls where is the transmission cooler line for Hyundai accent 2013? Is this procedure safe for my accent
It should be at the same location, it's safe if you do the steps right, and flush and add not more than 2.5L at a time or 1.5L to stay at the safe side
its unfortunate my 2017 camry has transmission fluid fill in the side of the drivers side and not on engine
ما اسم نوع هذه الزيت...
؟؟؟؟؟
What about sealed transmissions, which does not have a dipstick
What method can we follow in that case
Wouldn’t it be nice if all transmission pans had drain plugs. I have never had one that did.
Another smart idea brought to you by the auto industry. They want to sell you a new car instead of allowing easy maintenance to make your car last longer. Your first mistake was buying that car.
Just put back in what you take out. Maybe 1/3rd of a cup more because as transmission fluid heads up , a small amount is " boiled off" No much, but over 150k, its probably wise to add a little more.
What about the transmission fluid filter?
Good day , will this work FOR montero 2019 PREMIUM , thankyou
Thanks
Dear bro haw i can properly fit the machine
Can i ask a question?
Normaly maybe 30k miles will be achieved by 2 or 3 years for someone who use a car regularly to work or other daily activity
But if you have a car that not being used regularly, maybe it only achieved 5 or 6k miles a year. Is it okay to change automatic transmission fluid once in 5 - 6 years?
Or maybe there a certain maximum time interval that you should change that fluid beside from the car mileage like engine oil (which i know is 12 month that should be changed even the car is not reached certain mileage like 3 - 4 miles a year)
it needs constant replenishing. changing atf oil only remove 2.5 liters out of 8 liters of atf oil. so the new 2.5 liters will mix with 5.5 liters of old atf oil. majority of the oil is still old oil
Ok, but according to many types of automatic transmision such as cvt type, does your metode could done at all types of automatic transmission?
I did the same on mitsubishi outlander it has cvt as well,
@@AliMECH ok thank you bro
When starting the engine, do you also have to operate the transmission gear?
No
What about the transmission filter inside the the sump, is it not necessary to replace at the same time?
40,000 km
In my car i dont have the option to check the fluid level . How can i tell how much my car have after flushing . Baic x25 2019
check your car's manual if you don't have it then put the same amount of oil that you dropped. for example you drop 2L put 2L
I've been told this can damage your transmission because it's running on low oil.
I would like to understand why this works without mixing the old and new fluid. Thanks!
The first step is the important one, when I drained and added new fluid, now all the fluid are new in the drain pan, and it will only suction new fluid in the pan and discharge the old fluid out of the cooler hose
Isn't it bad if the transmission and car is temporarily running without any transmission fluid?
it never gets out of fluid, if you look at the video, he opens the drain plug, adds new fluid and later goes slowly changing all fluid. On the hypotetical scenario of running without oil you will burn all clutches and worst, can damage the oil pump and another components.
Nice job, but 10 minutes?😂😂😂
much better if you replace the atf filter right?
Air filter? I think you mean transmission oil filter.
@@davidyoung8521 I didnt say air filter 😑
@@Jon-yo4wj Lol too. I feel the ignorant of you 🤭
Hello. Does it do the total shift even without shifting gears? Wouldn't you have to change brands while draining?
That is why they say this method, the best method, still only exchanges 90% of the fluid. You should only replace everything but maybe .5L. Then button everything unlike he does but take it for a short ride so it goes through the gears. Then check the level with the dipstick and add what is needed to fill properly because there was some trapped fluid until it shift through all the bands.
Do I start the beginning drain process when the engine is cold or warm. Also what is the size of the transparent hose.
Hot engine will make the oil come out faster, and the hose I used was 8mm inner diameter
@@AliMECH So I just idle the engine for 5 minutes then afterwards start draining the transmission fluids.
@@AliMECH If I also want to replace the filter, do I drain the pain, remove the plate and install the new filter, then pour new Trans oil. Will the filter become dirty if I afterwards flush the cooler lines, or the old trans oil will not reach the filter.
So why not do this until the fluid "comes out" new? Isnt that usually the way if you want a completely new flush
You won't catch up refilling when the transmission puming oil out, then it will suction air and you might damage it
Ok, so what happens to the old ATF in the cooler you need to flush that out.
The cooler is in the circuit. When you flush, that includes the cooler.
Hey my car makes squeaky noises when I turn my steering wheel and when I drive slow what can be causing this ?
Top mount
Power steering fluid may be low. Or it needs a power steering fluid exchange (i.e. flush.)
What kind of car could get a better reply.
Power steering pump related, if the noise changes while you turn the steering. Noise from power steering can be due to several reasons:
Low power steering fluid - check the level of fluid from power steering fluid reservoir on top of hood and fill if necessary.
Noise sometimes caused because there are air bubbles in the system: Just turn steering wheel slowly completely to right and then to complete left, this allows the air bubbles to escape the system- noise should go if this is the case.
In some cases noise caused due to power steering pump itself may be slowing dying.
Good luck with your diagnosis 👍
No filter change? Your are doing half the job. Do you leave the old oil filter on when changing the oil?
This won’t clean the filter though!
Easy if it has a drain plug..
Yes, most cars has drain plug, even if it doesn't have one, just drain from the cooler hose and add same amount, I did that before as well
@@AliMECH That will flush it complete as well?
Good day! How do we determine if it's the outlet hose of the oil cooler?
Thanks, if I don't know, I put a transparent hose between any of the 2 hoses and start the engine to know the direction of the flow
If you flush like that. Your transmission will damage. Because no transmission fluid inside. When you flush with the car running.
The transmission draws fluid through the filter in the pan, this fluid then flows through the transmission and then through the cooler before returning to the pan if it wasn't draining into a catch can. So as long as there is always fresh fluid in the pan, what damage can be caused?
The transmission draws fluid through the filter in the pan, this fluid then flows through the transmission and then through the cooler before returning to the pan if it wasn't draining into a catch can. So as long as there is always fresh fluid in the pan, what damage can be caused?
Damn my Honda transmission fluid is expensive.
How much 😅
Only bad, I do not have a Toyota
Flush is never good idea for transmission
This way without flushing equipment is completely safe, the only difference from running the car at idle like normal, is that you are continously putting new fluid in the pan, and instead of letting the old fluid return to the pan to get sucked up by the oil pump again, you let the old fluid drain into a separate container, and the transmission's oil pump sucks up the new fluid you keep filling.
The only ways you can screw anything up with this method, is if you let it run dry for too long, if you refill it with the wrong type of fluid, or if you fill the wrong amount (too much or too little).
Power flushing is usually a bad idea. You pump all kinds of grit around. Multiple drain and refill runs the risk of running the pump dry. You have to be very careful. All this ignores that replacement of the filter. Do you leave the old oil filter on when changing the oil?
@David Young on refill you change the filter
I just bought a jeep cherokee xj 95. It has 88 thousamd miles and the transmission fluid looks like it needs changed but isnt really bad burnt looking. Would it be safe to do this process
Yahoo.unreal .))
🙏🙏
Is this draining the old fluid inside the torque converter also?
Yes