RR RACING CARBON FIBER INTAKE AND HEAT SHIELD INSTALL

Поділитися
Вставка
  • Опубліковано 8 лип 2024
  • RR-Racing makes amazing high quality parts for The Lexus Brand check out their info below.
    www.rr-racing.com/
    MUTEKI WHEEL NUTS- amzn.to/2U3Xiu9
    ZLI ADD ONES JACKING POINTS- amzn.to/2Erv4Eh
    FLAT STOPPERS- amzn.to/2NnBFT2
    CTEK BATTERY CHARAGER- amzn.to/2Nmkgdm
    RODE VIDEO MICRO- amzn.to/2NmYGWp
    GO PRO MACRO LENS- amzn.to/2BLaehh
    SPC CAMBER ARMS- amzn.to/2H07dx6
    BPD WHEEL CLEANER- amzn.to/2GVD5Df
    SUN JOE PRESSURE WASHER- amzn.to/2H45Opz
    WOOL WASH MITT- amzn.to/2H17orV
    ADAMS WHEEL CLEANER- amzn.to/2E4FWXk
    ADAMS CERAMIC COATING- amzn.to/2GWEdX0
    CQUARTS CERAMIC COATING- amzn.to/2Iy8e22
    CQUARTS LEATHER- amzn.to/2Nqpg0H
    CQUARTS DLUX- amzn.to/2Nm3KdB
    BEAD MAKER- amzn.to/2BPi7lQ
    LEXUS DOOR LOG LIGHTS- amzn.to/2ErFrrD
    HONEST WASH TIRE SHINE- amzn.to/2BRhick
    ADAMS FOAM CANNON- amzn.to/2U3P4SL
    ADAMS CLAY BAR- amzn.to/2EaM3th
    MR HEATER PROPANE HEATER- amzn.to/2EtLOuD
  • Авто та транспорт

КОМЕНТАРІ • 65

  • @ljc1821
    @ljc1821 Рік тому +1

    When u mounted the horn on the other location, did u have to go underneath the car to add the bolt to fasten the horn or was it fastened from above just fine?

  • @hds8182
    @hds8182 4 роки тому +2

    The heat shield is an extreme pain in the ass to install. Holy shit

  • @NewShockerGuy
    @NewShockerGuy 3 роки тому +4

    Love how the intake tube looks, hate that they didn't integrate the two breather hoses into the intake tube. I dislike the separate hoses/filter. Probably going to go with the Tom's intake tube. Even though it's just for looks. Intake tubes on our cars don't do anything. But they are definitely much nicer looking than the plastic factory one.

    • @BulletsGarage
      @BulletsGarage  3 роки тому +1

      Yes toms is the one u would get if I did it again

  • @luismendez0755
    @luismendez0755 4 роки тому +2

    Where did the 2 rubber lines go that are suppose to go on the intake tube? I know the RR Racing tune doesn’t have them, what do you do with them?

    • @BulletsGarage
      @BulletsGarage  4 роки тому +1

      Luis Mendez they get eliminated with the hoses that come with the kit

  • @bwshort
    @bwshort 5 років тому +2

    The carbon fiber looks like it belongs in the engine compartment. The smooth intake tube should allow for a little less suction resistance. Nice mod.

    • @BulletsGarage
      @BulletsGarage  5 років тому +1

      Yea it fits in the engine bay real nice. Ur right it should have a little less air turbulence

    • @bwshort
      @bwshort 5 років тому +1

      4 week wait? Going on 4 months waiting on Tom’s. Gonna grab that heat shield though. Just saw it’s sold separately.

    • @BulletsGarage
      @BulletsGarage  5 років тому

      Yup it’s sold separate

  • @eddiegomez2115
    @eddiegomez2115 5 років тому +3

    Love your car man! Will you ever do a video of all the mods you've put on it?

    • @BulletsGarage
      @BulletsGarage  5 років тому +2

      Like an over view of all the mods ? I pro can do one.

    • @eddiegomez2115
      @eddiegomez2115 5 років тому +2

      Yeah! I’m thinking of getting one soon and want to get do all the mods you’ve done

    • @BulletsGarage
      @BulletsGarage  5 років тому +3

      Well till I put the video out u can watch all my previous videos. I filmed everything I did to the car.

    • @eddiegomez2115
      @eddiegomez2115 5 років тому +1

      Will do!

  • @The_Unsuitable
    @The_Unsuitable 3 роки тому +1

    Did the intake elbow and breather kit cause issues? On later videos the catch can and heat shield are installed but the elbow is replaced with the stock one.

  • @karambir87
    @karambir87 5 років тому +2

    Vent tube for the valve covers. where did you buy that? Did you made a video for it?

    • @BulletsGarage
      @BulletsGarage  5 років тому +1

      Rr racing yea I have a video it’s under installing k&n intake

    • @karambir87
      @karambir87 5 років тому +1

      @@BulletsGarage thanks Man! So basically I don't need air/oil separator if I install this or that is a separate line?

    • @BulletsGarage
      @BulletsGarage  5 років тому

      That’s a separate line

  • @djfrakis
    @djfrakis 3 роки тому

    So noob question, what was the size of the hose you got to reroute the intake flapper, so it wouldn’t pinch?

  • @cheist2230
    @cheist2230 Рік тому

    What happens to the valve covers vents? Do they just sit there or do you connect them w something

  • @mrmica5.0
    @mrmica5.0 3 роки тому +1

    Like the video bro but why didn't u show the install of the breather?

  • @julianski09
    @julianski09 5 років тому +2

    You still have the ctek connected to your battery?

    • @BulletsGarage
      @BulletsGarage  5 років тому +3

      When the weather is bad and I know I’m not gonna drive the car for a few days yes I put it on cuz battery is 3 years old already and ppl have had their battery die out of no where

  • @1276388
    @1276388 5 років тому +1

    Didn’t get the PCV hoses part... where it’s connected now?

    • @BulletsGarage
      @BulletsGarage  5 років тому +1

      It’s vented into atmosphere

    • @1276388
      @1276388 5 років тому +1

      Bullets Garage won’t it give a check engine light?

    • @BulletsGarage
      @BulletsGarage  5 років тому

      No sir

  • @bojangifier
    @bojangifier 3 роки тому

    What benefit does it give besides looks?

  • @kader151
    @kader151 4 роки тому +1

    Carbon fiber look dope👍Did you feel any difference in torque and horsepower increased?

    • @BulletsGarage
      @BulletsGarage  4 роки тому

      No different. Intake won't give any improvement

    • @kishannn10
      @kishannn10 4 роки тому

      @@BulletsGarage supposed to give 11-15 hp no?

    • @AyeeKoolaidGaming
      @AyeeKoolaidGaming 3 роки тому

      @@kishannn10 I think you need to use the rr racing tune after getting the carbon fiber intake.

    • @BulletsGarage
      @BulletsGarage  3 роки тому

      No u don’t

    • @AyeeKoolaidGaming
      @AyeeKoolaidGaming 3 роки тому

      @@BulletsGarage then what’s the point of getting this intake ? And doesn’t the intake work better with the rr racing tune?

  • @TobajzzHD
    @TobajzzHD 4 роки тому +1

    how much hp gain will this make?

    • @BulletsGarage
      @BulletsGarage  4 роки тому

      Inatake. None really

    • @TobajzzHD
      @TobajzzHD 4 роки тому +1

      @@BulletsGarage oh okay, what's the best way to gain hp on these without spending too much?

    • @BulletsGarage
      @BulletsGarage  4 роки тому

      Headers and exhaust

  • @simmyyin8040
    @simmyyin8040 5 років тому +2

    Hey brother. What do you think about "Tom's Racing" parts straight from Japan? I heard it was a great product. There's a few ppl on YT (one owns a LC500 and the other I think owns both lol LC500 and RC F). One guy I think it's called, "Diego GS F Tom's racing Mods". What do you think of Tom's Full Titanium exhaust system, Carbon suction pipe kit, Brake line (made of Telfon and stainless steel mesh), the Racing brake pads, Air filter Super Ram II, Racing suspension, Suspension member reinforce brace front/rear. Lol That total set-up is around $13,891 USD excluding labor unless you can do it yourself. I'm in the process of opening my business 1st qtr of next yr. If it goes well, I'm shooting for a LC 500 or RC F. Love your vids bro. Keep it up 👌👍✊

    • @BulletsGarage
      @BulletsGarage  5 років тому +2

      Hey simmy yin. Yea I know Diego he is a buddy of mine. He has a beautiful toms gsf. Toms is an amazing high quality brand for Lexus. You cannot go wrong choosing toms. I definitely recommend them if you have the money for it.

    • @simmyyin8040
      @simmyyin8040 5 років тому +1

      @@BulletsGarage Lol nice! It's a small world. I want the GS F because of yours and Diego, but my heart is set on the Coupes. Haha Keep posting more mods or anything new on your ride bro! 👍

    • @BulletsGarage
      @BulletsGarage  5 років тому

      LC is nice but it’s heavy

    • @simmyyin8040
      @simmyyin8040 5 років тому +1

      @@BulletsGarage I know. But, the damn sleek exterior and interior design gets me. Haha Well see though, hopefully within a year or 2, I'll be apart of the F Club family.

    • @BulletsGarage
      @BulletsGarage  5 років тому

      Ok sounds good man. By then the LCF should be out that’s gonna be a good car

  • @BulliKid
    @BulliKid 5 років тому +3

    Didn’t u say u don’t want to void warentee?

    • @BulletsGarage
      @BulletsGarage  5 років тому +2

      Don’t worry my service advisor is cool so she has my back covered. Not worried about that

  • @juanhuerta8596
    @juanhuerta8596 5 років тому +1

    Who has installed one of these systems that lives in California. Will the inspector make a huge stink about it?

    • @BulletsGarage
      @BulletsGarage  5 років тому

      Idk. Cali laws r crazy

    • @juanhuerta8596
      @juanhuerta8596 5 років тому

      Tell me about it, I've been doing alot of research and it doesn't say anything about it. I even sent an email to RR racing and said has nothing to do with the smog.

  • @QuanTran-vv6mf
    @QuanTran-vv6mf 5 років тому +1

    Does it sound louder?

  • @ClazzioCovers
    @ClazzioCovers 4 роки тому +1

    +100 hp