Thanks for actually explaining what stuff looks like that's toast and what it should look like when not abused or new. Very informative!!! 1000 thumbs up!
really appreciate your video, thanks in advance...looks like your one of many that don't provide the needle bearings for 1st, 2nd, and 3rd gear in your kit? seems there not readily available anymore or hard to find so people selling the kits without them. I found them at one of the authorized Tremec ELITE dealers called Modern Driveline out of Idaho. plus they have the one piece shift interlock finger/pin where the old design was a tow piece that could fall apart.
Awesome channel! Can you please give me some advice on my new to me WC T5? I'm having trouble shifting into 5th and reverse. It is very hard to get into gear. No strange noise, clutch is adjusted correctly. This transmission sat for several years without fluid. I just installed and started running it and I was told it might loosen up after running it for awhile. Is this valid advice. I'm running non synthetic ATF fluid. I appreciate any help you could provide. I don't want to tear it down unless necessary. Thanks
Good video...... we are releasing a brand new 2.95 ratio gear set for the Ford application rated at 450 hp and retains the factory 10 spline clutch. It might be something worth looking at for you in the future on rebuilds.
Where can you get a built pro street out the door with a core? I have a T5 sitting in my garage right now. I’m watching this video now tryna figure out how to rebuild it. I rather just drop the newly built T5 in…
The Pro Street is a package I put together myself after years of rebuilding T5s. I am located in Costa Mesa, Ca. If you aren’t able to drop off locally then its usually a deal breaker to ship as shipping can be an additional $250-$400 depending on where you are. If you are interested send me an email or dm me on Instagram. I also sell parts to make your T5 a Pro Street all in one package. Link to my website is in the description. Thanks. 505speeds@gmail.com Instagram @505speeds
Can you provide the vendor for rebuild kit? I have a T5 I want to rebuild and am looking for a rebuild kit better than stock but doesn't have to be a race capable trans. Thanks, Kevin
Thank you, I have the link now. I appreciate it. Do you have the steel front bearing retainer as well? Or do I just buy it from another supplier. Thanks again, Kevin
@@irishjig1013 I have everything in the video available to purchase including the steel retainer. Having a few issues setting up shipping so if you have any problems send me an email, I usually respond pretty quick.
Thanks for actually explaining what stuff looks like that's toast and what it should look like when not abused or new. Very informative!!! 1000 thumbs up!
Thanks Mark!
Dude those throw in the trash shots are killen me 😂😂😂
For someone who has never rebuilt a trans, the level of detail does not go unappreciated
This is by far the best video out there
Thanks I really appreciate it, means a lot 👊🏼
I'm into SIM racing, and these mechanical designs are so clever. It's an art!
I'm new to this channel, looking forward on watching your videos. Very new to transmission rebuilds. Thank you for your very in depth video.
Excellent video, really enjoyed it.
Excellent vid. Thankyou
Thanks for the comment
Excellent video thanks
really appreciate your video, thanks in advance...looks like your one of many that don't provide the needle bearings for 1st, 2nd, and 3rd gear in your kit? seems there not readily available anymore or hard to find so people selling the kits without them. I found them at one of the authorized Tremec ELITE dealers called Modern Driveline out of Idaho. plus they have the one piece shift interlock finger/pin where the old design was a tow piece that could fall apart.
Awesome channel! Can you please give me some advice on my new to me WC T5? I'm having trouble shifting into 5th and reverse. It is very hard to get into gear. No strange noise, clutch is adjusted correctly. This transmission sat for several years without fluid. I just installed and started running it and I was told it might loosen up after running it for awhile. Is this valid advice. I'm running non synthetic ATF fluid. I appreciate any help you could provide. I don't want to tear it down unless necessary. Thanks
I’m in SD, how much do you charge for these rebuilds?
is it possible to replace the 4th gear synchro's just by removing the collar and tail shaft only?
Good video...... we are releasing a brand new 2.95 ratio gear set for the Ford application rated at 450 hp and retains the factory 10 spline clutch. It might be something worth looking at for you in the future on rebuilds.
Thanks, Im interested. If you could send me an email with what you have to offer that’d be great. 505speeds@gmail.com
Where can you get a built pro street out the door with a core? I have a T5 sitting in my garage right now. I’m watching this video now tryna figure out how to rebuild it. I rather just drop the newly built T5 in…
The Pro Street is a package I put together myself after years of rebuilding T5s. I am located in Costa Mesa, Ca. If you aren’t able to drop off locally then its usually a deal breaker to ship as shipping can be an additional $250-$400 depending on where you are. If you are interested send me an email or dm me on Instagram. I also sell parts to make your T5 a Pro Street all in one package. Link to my website is in the description. Thanks.
505speeds@gmail.com
Instagram @505speeds
How much do you charge for a rebuild?
Muy excelente trabajo 👍
Thank you 🙏🏻
I have a quastion please, does this rebuild kit fit on mustang V6 3.8L 2000 , T5 manual transmission
The rebuild kit yes, if you are looking for gears send me an email as there is a minor difference 505speeds@gmail.com
@@505speeds Thanks bro 👍🏻
Where are you getting your headsets from?
Do you have a video on a T-45 transmission rebuild?
excuse, do you what oil use? for t5
Go watch part 2 its at the last few minutes of the video
Can you provide the vendor for rebuild kit? I have a T5 I want to rebuild and am looking for a rebuild kit better than stock but doesn't have to be a race capable trans. Thanks, Kevin
@@irishjig1013 Hi Kevin I added a link in the description
505-speeds-shop.square.site/product/mustang-t5-world-class-rebuild-kit/20
Thank you, I have the link now. I appreciate it. Do you have the steel front bearing retainer as well? Or do I just buy it from another supplier. Thanks again, Kevin
@@irishjig1013 I have everything in the video available to purchase including the steel retainer. Having a few issues setting up shipping so if you have any problems send me an email, I usually respond pretty quick.
Where do i buy that gear set?
Link in video description. I offer multiple kits, check it out.
@@505speeds i clicked both links i dont see just the gear set
@@SBS_Auto 505-speeds-shop.square.site/product/2-95-pro-street-gear-set/16
Could you build me a transmission t5 with a s10 tail shaft to change the shift point
Sure, send me an email with exactly what you’re looking for 505speeds@gmail.com
Are you a mechanic full time? 😮
Pretty much full time mustang enthusiast