i need more info because everyone else that has done this claims there is major lag on the cobra x goggles. and its a shame because thats what i have and want to go digital with this avatar vrx
I am planning to use this VRX with a gaming (super low latency) HDMI monitor that is less than 100 USD at 144 Hz and often with free shipping. There are many reports of lag of 70ms in this setup of vrx+cobra.
Hello, i too have a Skyzone Cobra X goggles same like you, planning to buy walksnail VRX, can you show me the setup how you have attached the VRX to goggles and the setup if possible.
how comes, you have steady 32ms latency. I just bought skyzone cobra x goggles, but I didn't mean to put walksnail vrx, because I saw Bardwell's latency test(over 70ms) .
Man I have the same goggles that I pre-ordered walk snail for, my lunch break's almost over so I got to run I would love to see you do a breakdown of this setup if you haven't already
@@DivisionRc I searched google for "walksnail 50 megabits" probably 50 times. I almost decided to do the unlock just to see if the extra channels changed anything(I tried the 3+1 available) like on the DJI you need to be on a specific channel. To me the 50 megabit doesn't look a lot different but it's nice to get more warning as you lose signal vs now it drops from 25 to 13 then 5 and finally all blurry pixels, red border and lockup. My signal seems worse then yours with a 0.3g dipole, doesn't matter if I'm using walksnail goggles or 04x with VRX both suck compared to DJI. Been waiting for truerc to have the x air 2's for walksnail.
how does your video have audio from the drone's engines? my walsknail doesn't have that option and i like the engines in the video. I come from analogue
@@DivisionRc I ordered it from RDQ and would expect them to send it to me. I hope I get mine soon. If it’s not here in 2 weeks I’ll have to wait until May when I get back from deployment. 🥺
You might want to reach out and ask if they can check into it. Ordered mine from RDQ as well towards the end of Nov and it just arrived Wednesday of this week.
Unfortunately I’m only running 4.4 on two of my whoops due to ELRS Spi. I don’t run BF rc on any quads. The OSD is overlayed after recording with a brand new software that has been released. It’s like WTFOS OSD overlay, but a little worse. The OSD is more inward and I’m thankful 4.4 will fix this.
First C_x test I seen yet with this system . MBs MBs MBs is all I hear 🥵 so over rated . I think the video was outstanding! All in own is CX first gen goggles and I want what you have . Ty
Not much. I just kept it at 720 60fps. I do recommend to install the channel + power hack ( power hack I believe is only for the bigger vtxs but at least you will be prepared). Without the Channel hack I was not able to use 50mbps
@@DivisionRc Sounds good. I'm trying to figure out one why my vtx isnt updating and two how to get my osd unless thats not gonna show. Any links to the power hack
as for analog dji and hdzero, i cannot really tell with WS. Im not a huge latency person. Cant notice a difference with all of them ( other when signal is low)
너무 좋은 정보 잘보고 갈께요!
Will there be a maximum range test?
for sure. Once it drys up here ill do that ( rained a lot dont want it to fall in a puddle lol)
Looks great mate 👍🏼 I’m considering walksnail
i need more info because everyone else that has done this claims there is major lag on the cobra x goggles. and its a shame because thats what i have and want to go digital with this avatar vrx
I am planning to use this VRX with a gaming (super low latency) HDMI monitor that is less than 100 USD at 144 Hz and often with free shipping. There are many reports of lag of 70ms in this setup of vrx+cobra.
👌🏼🚀😍 Like me on the ground!!! I m happy with this set up I just received the vrx and so' impatient ' to try. Exc my English. Stay safe
Have fun when you get it running!
Nice flying bro! 🎉
Thanks ✌
Hello, i too have a Skyzone Cobra X goggles same like you, planning to buy walksnail VRX, can you show me the setup how you have attached the VRX to goggles and the setup if possible.
I will be making a video soon about my goggle setup
@@DivisionRc thanks, waiting for it
how comes, you have steady 32ms latency. I just bought skyzone cobra x goggles, but I didn't mean to put walksnail vrx, because I saw Bardwell's latency test(over 70ms) .
Thanks Bro for the video. But what's the name of the box goggles u are using ?
Sky zone cobra x v2s.
Man I have the same goggles that I pre-ordered walk snail for, my lunch break's almost over so I got to run I would love to see you do a breakdown of this setup if you haven't already
Definitely will do! Will make that the next video after a antenna comparison coming soon
I assume you are using the 1s VTX? I cannot seem to get 50 megabits on any of mine.
requires a "unlock" file
walksnail.help/books/avatar-hd-official-instructions/page/avatar-hd-goggles---unlock-procedure/export/pdf
@@DivisionRc I searched google for "walksnail 50 megabits" probably 50 times. I almost decided to do the unlock just to see if the extra channels changed anything(I tried the 3+1 available) like on the DJI you need to be on a specific channel. To me the 50 megabit doesn't look a lot different but it's nice to get more warning as you lose signal vs now it drops from 25 to 13 then 5 and finally all blurry pixels, red border and lockup. My signal seems worse then yours with a 0.3g dipole, doesn't matter if I'm using walksnail goggles or 04x with VRX both suck compared to DJI. Been waiting for truerc to have the x air 2's for walksnail.
Good afternoon. Please tell me, I'm not good at this. VRX X1 this thing takes a digital signal and converts it to analog, or I'm wrong.
how does your video have audio from the drone's engines? my walsknail doesn't have that option and i like the engines in the video. I come from analogue
I used my iPhones voice memo app and then sync the audio up with the video based on when I armed the quad
Tks
When did you get yours?! I ordered from RDQ also on Nov 5th and all I’ve seen is the email from Caddx saying they don’t know when I’ll get it… 😢
Got it from RDQ myself
@@DivisionRc I ordered it from RDQ and would expect them to send it to me. I hope I get mine soon. If it’s not here in 2 weeks I’ll have to wait until May when I get back from deployment. 🥺
You might want to reach out and ask if they can check into it. Ordered mine from RDQ as well towards the end of Nov and it just arrived Wednesday of this week.
The way showing the OSD is looking good and clear. The vrx module supplied with 2s, when it comes to reach 7v, is it enough to fly couple of times?
Yes. I don’t know the exact run time. Will test soon. I’ve been using a 2s 3500mah 18650 pack
how is the cobra x with the walksnail avatar? because some people say they have lag and problems wuth this duo
Holy shit, you're the 1st I've seen on Walksnail with the BF 4.4 HD OSD working. Is that overlay on the recording, or what you see in the goggles?
Hey, I figured it out. SKEAKY_FPV font linked in the comments.
Unfortunately I’m only running 4.4 on two of my whoops due to ELRS Spi. I don’t run BF rc on any quads. The OSD is overlayed after recording with a brand new software that has been released. It’s like WTFOS OSD overlay, but a little worse. The OSD is more inward and I’m thankful 4.4 will fix this.
github.com/kirek007/ws-osd-py/releases/tag/v0.6
Where did you get your font from? I want my OSD to look like that.
sites.google.com/view/sneaky-fpv/home
First C_x test I seen yet with this system . MBs MBs MBs is all I hear 🥵 so over rated . I think the video was outstanding! All in own is CX first gen goggles and I want what you have . Ty
Awesome!! i have the cobra x v1 and am in the process of trying to get my vrx set up and the 1s vtx on the larva x. Any tips.
Not much. I just kept it at 720 60fps. I do recommend to install the channel + power hack ( power hack I believe is only for the bigger vtxs but at least you will be prepared). Without the Channel hack I was not able to use 50mbps
@@DivisionRc Sounds good. I'm trying to figure out one why my vtx isnt updating and two how to get my osd unless thats not gonna show. Any links to the power hack
Hey friend, how did you attach the vrx module to Skyzone cobra X?
www.thingiverse.com/thing:4946834
Just ordered my VRX for my Cobra X. Which antennas do you recommend for the VRX? Also was the video recording from the DVR or the onboard SD?
Are you powering the vtx from the 5v pad? Stock crux3 fc?
Yes. Goku f405 20a 2-6s AIO.
is the latency are feels when flying?
What you can say about latency? I heard that it is very high at cobra x
as for analog dji and hdzero, i cannot really tell with WS. Im not a huge latency person. Cant notice a difference with all of them ( other when signal is low)
@@DivisionRc maybe if you unolocked vrx it whould work better
It’s already unlocked
Camera dynamic range is not as good as polar