You should take your springs off or switch them to stock springs. Will lower the center of gravity so it ain’t so high unless you like it all high then whatever lol.
I programmed mine yesterday. It was a big pain but I got it. You cave to go to injora website and go to the programming tutorial and download their program, then unzip it, and the rest is just follow injoras video instructions. If you get that far and you can't get the esc to connect to the computer, try a different usb cord. Took my hours but swapped the usb cord and it finally recognized it. Reprogramming will fix that choppy thing it does at very slow speeds. You can see it in this video when he's going slow
@ is there not the program on the programming part. The one I have to connect with a usb c cable? I’ll try it again. And do you think it’s with doing it? What is the benefit? And thank you 🤓
You should take your springs off or switch them to stock springs. Will lower the center of gravity so it ain’t so high unless you like it all high then whatever lol.
yeah that thing rides insanely high
@@hachiEightSix right! Thats why I mentioned it. Hopefully he takes the advice but if he likes that way then.. yeaahhh good luck haha
Very Awesome, I think this is the best brushless motor set up for your money. It’s what I’m going with. The performance seems to be great.👍🏼
I love this setup I have a very similar setup and it’s very capable great video
Sweet video man thanks. Try reprogramming the esc it will fix that slow speed choppyness you are getting. Cheers
You should put some longer shocks on it, and make it even taller
Can I run this conversion kit with the stock transmitter and receiver?
I am struggling to program it. How did you do it or what happens after connecting the programmer with the pc ? In my case, nothing…
I didn’t program mine, I’ll have to try this too see if I have the same issue. Sounds like somethings wrong with yours though I’d contact Injora
I programmed mine yesterday. It was a big pain but I got it. You cave to go to injora website and go to the programming tutorial and download their program, then unzip it, and the rest is just follow injoras video instructions. If you get that far and you can't get the esc to connect to the computer, try a different usb cord. Took my hours but swapped the usb cord and it finally recognized it. Reprogramming will fix that choppy thing it does at very slow speeds. You can see it in this video when he's going slow
@ is there not the program on the programming part. The one I have to connect with a usb c cable? I’ll try it again. And do you think it’s with doing it? What is the benefit? And thank you 🤓
Can you run it as a rear facing motor?
I believe you can flip the skidplate and run in rear facing. I'm not 100% sure though
"Just 60 dollars"... its $69.99... plus tax... plus possibly shipping 🤷♂️
Plus a new transmitter and receiver if you dont have a compatible one
Did you have to program the esc or were you able to plug in and go with it?
I didn’t have to program it.
@@rockyrc awesome thank you and it’s still running good?
Yup, no issues
If you get slow speed choppyness reprogramming it to injoras specs it'll take care of that. Cheers!
@@ccgcon9574 will keep that in mind thank you. Been running great tho