YOU ARE THE MOST FANTASTIC TEACHER THAT I HAVE EVER HAD THE PLEASURE TO LEARN FROM.... I WAS BEATIN MY BRAINS OUT TRYIN TO FIGURE OUT WHERE MY LAST DS WENT WHEN I WOULD CLOSE MY RING AND BY GOLLY IT WAS THERE IT JUST ROLLED OVER AN PLAYED DEAD.... WELL I WILL JUST PUT A STOP TO THAT WHEN I GET MY STUFF OUT TO PRACTICE AGAIN... MAN OOOOOO MAN WHEN I SEEN YOU DO THAT EVERYTHING THAT I HAVE BEEN FIGHTING IN MY HEAD WENT OUT THE WINDOW AND MADE ME FEEL GREAT AGAIN.... I ALSO NOTICED THAT YOU DONT TIGHTEN UP YOUR WORK WITH YOUR SHUTTLE BUT USED YOUR RING FINGER ON YOUR SHUTTLE HAND... I THOUGHT WOW MAYBE THAT WILL HELP ME WITH THAT HACK OF A MESS THAT I GET ON THE SHUTTLE AN HAVE TO FIGHT WITH TO PUT ON AN TAKE OFF THREAD WHEN I START TO MAKE A NEW FEW STITCHES.... GIRL I LEARN SOMETHIN SPECIAL WITH EVERY VIDEO I WATCH YOU DO.... YER JUST A FANTASTIC PERSON.... SOOOOOOOOOOOOOO VERY GLAD THAT I FOUND YOU AN YOUR VIDEOS.... I FEEL THAT I MAY NOW LEARN TO BE A PATCH ON A SHUTTLE TATTERS ELBOW..... IT WILL TAKE ME MANY YEARS TO BE PROFICIENT AS MOST... BUT I DONT CARE I AM FINALLY LEARNING TO TAT WITH A SHUTTLE.... HIP-HIP-HOOOOOORAY.... BLESSINGS KIDO & AS ALWAYS BE HOPE FILLED FRANKI
Finally.... I get to try lesson 4! I've spent the last 3 days trying to get the flip right and it's a lot more complicated than one thinks!!!! lol Thank you so much for these videos, I look forward to learning from you
I'm trying the shuttle. I think I might change to needle. Today was my first day..and boy or boy...I dnt feel comfortable the way it feels over my fingers. Gonna keep trying of course.
This is wonderful. Yes, it really does make things so much more understandable. In posting, if you do add 1 more half stitch, do you do it before or after the post?
Hello! I have the double stitch method down. However, whenever I pull the thread that is attached to my shuttle to close my ring, it just makes the last double stitch into a hard knot and does not close the ring. No matter how hard I pinch the stitches or pull the shuttle thread, nothing closes. What am I doing wrong? Here is a video of someone else with the same issue as me - @ I am currently practicing with a single shuttle, no additional threads as that's all I have right now. Quick breakdown: 1: I pinch the end of the string, leaving a couple inches tail. 2: I do my double stitches, starting with under the thread, then over. 3: After I do all my stitches, I did the half stitch you mentioned at the end of this video and I pull the shuttle thread and it merely tightens down stitch I just made, it does not close the loop. I see you respond to all your comments, so is there any way you could help me with this please.
you have to transfer the knot over. when you make the double stitch loosen up the hand with the loom on it and pull the shuttle thread tight. That will transfer the knot. I hope that explains it for you. Here is a link to the video that shows how to do that. ua-cam.com/video/iMT6I5FVPe4/v-deo.html
Hi I am having issues with closing the ring, all my stitches look fine and move freely. But I can only close the ring pulling the ball thread not the shuttle thread..What am I doing wrong, I'm pulling my hair out trying to figure it out.. Your help would be much appreciated. Thank you
If your closing the ring using the ball thread your not flipping your stitches. The stitches have to flip over or the shuttle thread won't close the ring. I hope that helps you. Happy tatting.
Dear Georgia , I'm in love with your tutorials and I had managed to get the ring perfect but I'm wondering how to get the chain in the same color. I would appreciate your help here pls. Thanks very much for the wonderful lessons
Noni Thank you for watching. First of all let me let you know I am not Georgia. My name is Tamie and I make the videos for Georgia's online classes. We would love for you to join us they are free to all who want to learn. Here is the link to join if you would like. www.georgiaseitz.com Now to answer your question. If you want the chains the same color as the rings then all you would do is use one color for both. you don't need to use 2 different colors. In the video I use this to show the difference between the chains and the rings. I hope that helps you and again thank you for watching. Happy Tatting
Hi! Wonderful videos. I'm trying to learn shuttle tatting. I've been watching your videos. I'm having such a hard time getting my left hand to cooperate. I've done a little needle tatting and my index finger wants to be the dominating finger in controlling the tension. My other 3 fingers aren't as flexible. I can do the chains but I'm having a hard time doing the rings and holding he thread in my left hand. I'm not sure I'm positioning my hand the correct way or what. Any advise for a brand new shuttle tatter? I really want this to work. There are so many lovely pieces I'd like to make.
Hi Teresa. Thank you so much for your kind words. Sometimes getting the left hand to participate is difficult. It just doesn't want to see things the way we see them. If you crochet you can hold the left hand thread as if you were crocheting. You would have the pinch with the thumb and middle finger. Your index finger would hold the tension. Your shuttle would pass thru under and over the tensioned area for the first half then over and under for the second half. Mid October I will be releasing some new videos and this question is one at the top of the list to show and explain how to do it. For now I hope this helps you. If not don't hesitate to ask. Happy Tatting
+Leona Crossland Hi Leona, I sure will. That will be put on the list of the vids to put out over the summer. It will probably be one of the first as i wanted to get all the technique vids out before doing the tat alongs Georgia has requested. That way everyone will have the information they need to follow along on the tat alongs. Happy Tatting
+Melanee Van Ee-Mortensen Your Welcome Melanee. I am so happy you enjoyed the videos. Happy tatting.. I am working on some new ones for next week's class so be looking for them.
Hello I am currently working on a Doily the A- 1084 that is featured on Georgia's site, I am stuck on how to work with the picots leaving 1/4 thread , do you have a tutorial on how to do this. I would so love to complete this pretty doily. thanks Nila
Hi Nila, Sorry it has taking so long to write you back. Life gets in the way of fun things. However thank you for watching. I do have a video on another channel that shows how to use a picot guage. I will say beforehand that it isn't the best video on earth. It was from early on in the learning curve of making videos however here is the link to that. ua-cam.com/video/L8ZdY-XqD08/v-deo.html I hope that helps if you have any other questions please let me know
I've been trying to shuttle tatting for 50+ years now. Tonight, thanks to your video, I made my first ring. ❤
Thank you for your time and patience... very usefull! Have a nice day!😊
Dear Georgia, you are the best tat instructor that I have found on you-tube. Thank you so much.
Hi 👋sangita here. 🙏 very nice tutorial 👌
You are THE BEST to teach in all UA-cam!
Thankyou!👍👍👍❤❤❤
Tatting it s difficult enough for me but I won t give up. Thank you for your lessons. They are so helpful.
YOU ARE THE MOST FANTASTIC TEACHER THAT I HAVE EVER HAD THE PLEASURE TO LEARN FROM....
I WAS BEATIN MY BRAINS OUT TRYIN TO FIGURE OUT WHERE MY LAST DS WENT WHEN I WOULD CLOSE MY RING AND BY GOLLY IT WAS THERE IT JUST ROLLED OVER AN PLAYED DEAD.... WELL I WILL JUST PUT A STOP TO THAT WHEN I GET MY STUFF OUT TO PRACTICE AGAIN... MAN OOOOOO MAN WHEN I SEEN YOU DO THAT EVERYTHING THAT I HAVE BEEN FIGHTING IN MY HEAD WENT OUT THE WINDOW AND MADE ME FEEL GREAT AGAIN....
I ALSO NOTICED THAT YOU DONT TIGHTEN UP YOUR WORK WITH YOUR SHUTTLE BUT USED YOUR RING FINGER ON YOUR SHUTTLE HAND...
I THOUGHT WOW MAYBE THAT WILL HELP ME WITH THAT HACK OF A MESS THAT I GET ON THE SHUTTLE AN HAVE TO FIGHT WITH TO PUT ON AN TAKE OFF THREAD WHEN I START TO MAKE A NEW FEW STITCHES....
GIRL I LEARN SOMETHIN SPECIAL WITH EVERY VIDEO I WATCH YOU DO....
YER JUST A FANTASTIC PERSON.... SOOOOOOOOOOOOOO VERY GLAD THAT I FOUND YOU AN YOUR VIDEOS.... I FEEL THAT I MAY NOW LEARN TO BE A PATCH ON A SHUTTLE TATTERS ELBOW..... IT WILL TAKE ME MANY YEARS TO BE PROFICIENT AS MOST... BUT I DONT CARE I AM FINALLY LEARNING TO TAT WITH A SHUTTLE.... HIP-HIP-HOOOOOORAY....
BLESSINGS KIDO & AS ALWAYS BE HOPE FILLED
FRANKI
LOL. I AM SO HAPPY I COULD HELP YOU. HAVE A WONDERFUL DAY AND HAPPY TATTING
Finally.... I get to try lesson 4! I've spent the last 3 days trying to get the flip right and it's a lot more complicated than one thinks!!!! lol Thank you so much for these videos, I look forward to learning from you
I'm trying the shuttle. I think I might change to needle. Today was my first day..and boy or boy...I dnt feel comfortable the way it feels over my fingers. Gonna keep trying of course.
First time I'm hearing about posting! I've seen my rings twist when I close them, I thought it was just because I'm a newbie. Thanks for the tip!
Love your nails.
Yay! I learned something new from this video too. I didn't know about 'posting' the shuttle. I'm gonna try it. Thank you for this great information.
Thank you very much!
This is what I am having trouble with. Thanks Georgia, now I will practice....
Thank you so much, I’ve finally got my rings to close. I was holding the thread wrong!!!
This is wonderful. Yes, it really does make things so much more understandable. In posting, if you do add 1 more half stitch, do you do it before or after the post?
How come no one demonstrate what really is done on first rings in a project. Do you just cut that part out?
Hello!
I have the double stitch method down. However, whenever I pull the thread that is attached to my shuttle to close my ring, it just makes the last double stitch into a hard knot and does not close the ring. No matter how hard I pinch the stitches or pull the shuttle thread, nothing closes. What am I doing wrong?
Here is a video of someone else with the same issue as me -
@
I am currently practicing with a single shuttle, no additional threads as that's all I have right now.
Quick breakdown:
1: I pinch the end of the string, leaving a couple inches tail.
2: I do my double stitches, starting with under the thread, then over.
3: After I do all my stitches, I did the half stitch you mentioned at the end of this video and I pull the shuttle thread and it merely tightens down stitch I just made, it does not close the loop.
I see you respond to all your comments, so is there any way you could help me with this please.
you have to transfer the knot over. when you make the double stitch loosen up the hand with the loom on it and pull the shuttle thread tight. That will transfer the knot. I hope that explains it for you. Here is a link to the video that shows how to do that. ua-cam.com/video/iMT6I5FVPe4/v-deo.html
Classy transfer
Hi I am having issues with closing the ring, all my stitches look fine and move freely. But I can only close the ring pulling the ball thread not the shuttle thread..What am I doing wrong, I'm pulling my hair out trying to figure it out.. Your help would be much appreciated. Thank you
If your closing the ring using the ball thread your not flipping your stitches. The stitches have to flip over or the shuttle thread won't close the ring. I hope that helps you. Happy tatting.
Dear Georgia , I'm in love with your tutorials and I had managed to get the ring perfect but I'm wondering how to get the chain in the same color. I would appreciate your help here pls. Thanks very much for the wonderful lessons
Noni Thank you for watching. First of all let me let you know I am not Georgia. My name is Tamie and I make the videos for Georgia's online classes. We would love for you to join us they are free to all who want to learn. Here is the link to join if you would like. www.georgiaseitz.com Now to answer your question. If you want the chains the same color as the rings then all you would do is use one color for both. you don't need to use 2 different colors. In the video I use this to show the difference between the chains and the rings. I hope that helps you and again thank you for watching. Happy Tatting
Iam not getting round form.when trying to pull the thread after tatting ,it not becoming round.could u please tell me why
@@anjuthomas474 Do you mean the ring doesn't close? Check to see if your last knot unflipped or if it's so tight the thread can't slide through.
Hi! Wonderful videos. I'm trying to learn shuttle tatting. I've been watching your videos. I'm having such a hard time getting my left hand to cooperate. I've done a little needle tatting and my index finger wants to be the dominating finger in controlling the tension. My other 3 fingers aren't as flexible. I can do the chains but I'm having a hard time doing the rings and holding he thread in my left hand. I'm not sure I'm positioning my hand the correct way or what. Any advise for a brand new shuttle tatter? I really want this to work. There are so many lovely pieces I'd like to make.
Hi Teresa. Thank you so much for your kind words. Sometimes getting the left hand to participate is difficult. It just doesn't want to see things the way we see them. If you crochet you can hold the left hand thread as if you were crocheting. You would have the pinch with the thumb and middle finger. Your index finger would hold the tension. Your shuttle would pass thru under and over the tensioned area for the first half then over and under for the second half. Mid October I will be releasing some new videos and this question is one at the top of the list to show and explain how to do it. For now I hope this helps you. If not don't hesitate to ask. Happy Tatting
Where do you get your shuttles
Could you please do a video on how to do the SLT using a shuttle and ball? I ran into this on a hankie edge pattern .
+Leona Crossland Hi Leona, I sure will. That will be put on the list of the vids to put out over the summer. It will probably be one of the first as i wanted to get all the technique vids out before doing the tat alongs Georgia has requested. That way everyone will have the information they need to follow along on the tat alongs. Happy Tatting
Traducción please subtítulos spanish 🙏🏻🙏🏻🙏🏻
Thanks for the videos! This was great!!!!!
+Melanee Van Ee-Mortensen Your Welcome Melanee. I am so happy you enjoyed the videos. Happy tatting.. I am working on some new ones for next week's class so be looking for them.
I will watch for the new ones! :-)
Hello I am currently working on a Doily the A- 1084 that is featured on Georgia's site, I am stuck on how to work with the picots leaving 1/4 thread , do you have a tutorial on how to do this. I would so love to complete this pretty doily. thanks Nila
Hi Nila, Sorry it has taking so long to write you back. Life gets in the way of fun things. However thank you for watching. I do have a video on another channel that shows how to use a picot guage. I will say beforehand that it isn't the best video on earth. It was from early on in the learning curve of making videos however here is the link to that. ua-cam.com/video/L8ZdY-XqD08/v-deo.html I hope that helps if you have any other questions please let me know
So once you make the chain how do you put a knot in it just flip it back over in the right way and put a knot
Hi and thank you for watching. Once you have done the chain you reverse
your work and continue on. No need for knots unless your a needle tatter
ماجبتي شي جديد بالدرس الرابع والدرس التاني
يعطيكي العافية
🤗👏👏👏😘🇨🇱🇨🇦
Fingaring is not that easy like you. Should be practice for me. But i know tatting another way.thanks
L.