Don't build a sleeper PC.
Вставка
- Опубліковано 22 лип 2024
- ---
Check out more beautiful computers at PC36 LTD in the UK
🎮 PC36 🎮
Visit www.pc36.co.uk for your next gaming PC!
- UK Only
- Prebuilts / Configurator / Custom Spec service
- The same builds and quality you see on the channel
- Code YT50 at checkout for £50 off any gaming PC! 😎
- Refer-a-friend bonus
- Or build it yourself with one of our digital build guides - 25% off with code YT25
--
Gear I use (US and UK links)
Note: This is what I have, and most of it I got used. But you do not need all this if you’re just getting started!
🇺🇸 [USA Links] 🇺🇸
*Recording gear*
🎥Camera 1 (Product Shots, Build Guides) | Sony ZV-E10 | amzn.to/3XCyZVI
🎥Camera 1 Lens 1 | Sigma 56mm Prime | amzn.to/3pxKgdo
🎥Camera 1 Lens 2 | Sigma 18-50 Zoom | amzn.to/43aJBw7
🔍 Camera 1 Lens adapter 1 | Neewer ND Filter | amzn.to/3XJxANm
🔍 Camera 1 Lens adapter 2 | KF Concept 1/8 Black Mist | amzn.to/46wjzX7
🎤 Camera 1 Mic | Rode Wireless Go | amzn.to/3NX587k
💡Lights 1a | Smallrig White | amzn.to/44sl8DG
💡Lights 2a | Smallrig RGB | amzn.to/3pD3yOs
💡Lights 2 | Logitech Litra Glow | amzn.to/3O2nUKI
🩼 Tripod | KF Concept | amzn.to/3JLbnbP
📸 Camera 2 (Talking head intros etc) | Panasonic Lumix G7 with Kit Lens (would not recommend to buy) | amzn.to/448JQcz
📸Camera 2 Capture Card | Elgato CamLink | amzn.to/46LDotQ
📸Alternative capture card (cheaper) | amzn.to/46BPwx8
🎙️Camera 2 Mic | Shure SM58 | amzn.to/3XJyhpW
🎙️Alternative Mic | Elgato Wave (no interface needed) | amzn.to/448Kxmb
🎙️Camera 2 Interface | Scarlett 8i6 | amzn.to/3rg1flb
💡Lights | Elgato Key Light x2 | amzn.to/3pEiVWT
🩼Stand | Smallrig | amzn.to/44utIBX
*Tools*
🪛 Precision driver set | iFixit Mako |
🪛 Ratchet screwdriver | amzn.to/3XCAJyk
📺 Portable monitor | 13.3in | amzn.to/3NGW7hg
🏓Desk | FlexiSpot EQ5
🇬🇧 [UK Links] 🇬🇧
*Recording gear*
🎥Camera 1 (Product Shots, Build Guides) | Sony ZV-E10 | amzn.to/44w8Mus
🎥Camera 1 Lens 1 | Sigma 56mm Prime | amzn.to/3D0l7ey
🎥Camera 1 Lens 2 | Sigma 18-50 Zoom | amzn.to/3XGIkfd
🔍 Camera 1 Lens adapter 1 | Neewer ND Filter | amzn.to/4389ahr
🔍 Camera 1 Lens adapter 2 | KF Concept 1/8 Black Mist | amzn.to/43bIKLJ
🎤 Camera 1 Mic | Rode Wireless Go | amzn.to/44x2ZF0
💡Lights 1a | Smallrig White | amzn.to/43aK9Cb
💡Lights 2a | Smallrig RGB | amzn.to/46xBD3f
💡Lights 2 | Logitech Litra Glow | amzn.to/44x2T06
🩼 Tripod | KF Concept | amzn.to/46u84jb
📸 Camera 2 (Talking head intros etc) | Panasonic Lumix G7 (only useful with manual focus) | amzn.to/3pC6eMw
📸Camera 2 Lens | Sigma 16mm 1.4 MFT | amzn.to/3qsJ2k1
📸Camera 2 Capture Card | Elgato CamLink | amzn.to/3rfe672
📸Alternative capture card (cheaper) | amzn.to/3NZ2iyt
🎙️Camera 2 Mic | Shure SM58 | amzn.to/46AFcpb
🎙️Alternative Mic | Elgato Wave (no interface needed) | amzn.to/46CQ0n1
🎙️Camera 2 Interface | Scarlett 8i6 | amzn.to/43r5I1P
💡Lights | Elgato Key Light x2 | amzn.to/43aKh4D
🩼Stand | Smallrig | amzn.to/3Dil1PL
*Tools*
🪛 Precision driver set | iFixit Mako | amzn.to/3NDEAGX
🪛 Ratchet screwdriver | Bahco | amzn.to/44aKWEI
📺 Portable monitor | 13.3in | amzn.to/3D0kXDY
🏓Desk | FlexiSpot EQ5
---
🪛Parts used in this build🪛
💸Curve card💸
Consolidate your credit/debit cards into one interface and even go back in time to change your payment card on previous purchases. Works with Google/Samsung Pay too! Carry one physical card and use it to assign purchases to different accounts
1% cashback on all purchases for 30 days when you sign up with our link! curve.com/join#NR4XBR4N - If asked for a referral code it's NR4XBR4N
#GamingPC
🕰️Timestamps🕰️
0:00 Oh
1:03 Dismantling
1:40 Building the platform
6:25 Installing
8:19 Modding the case
8:40 Making room for the 3090
10:36 Cinematic reveal "wow"
11:09 Bad temps
12:00 A slip up
12:43 Still bad temps
13:26 Gaming tests
17:10 Don't build a sleeper PC - Наука та технологія
I don't own any 80mm fans btw 😘
I still wonder what 2x 80mm exhaust fans will do for temps. I imagine it would drop temps a lot.
@@DiceAir it will drop a lot, i build a pc in a similar case the components were not as much as powerfull but putting just the 2 80mm fans in the back inprooved cpu temps by about 10c so i installed a front one and it improved the gpu temps too
One side benefit, if you are ever unfortunate enough to be burgled... if this is found in your home office, they'll probably leave it behind. 😂
Not after this video. Lol
My version of sleeper is everything is powerful but low powered, meaning you dont have to modified the case but it works even when doing heavy tasks or gaming.
The idea of a sleeper can be done but with low power parts, like more down to earth. Its just a horrible selection of parts.
Yep, I'm still on sleeper build things than modern RGB builds. Keep it simple and retro!
sleeper builds are great if some one at the moment can not afford all the upfront costs of that new bling bling, but need the modern tech for work, school, or gaming.
All it needs are some proper fans, like Noctua, and a Deadpool sticker on the side and it is perfect👌
I would definitely mod out 2 intake fans on the bottom of the case, and then use 2 80mm fans on the back for exhaust. It would make a huge difference to temps, and still can't be seen from the outside.
Sleeper builds are so nice to see! I used to have an i3 12100f and an rtx 2080ti in my coolermaster wavemaster 🗿
the frontpanel has holes in the bottom, can house 2 intake fans, arctic p8 for example, would probably greatly improve the temps. What many people do with sleeper builds is add intake to the bottom, as that is not visible from outside
Thermalright really is the goat with their budget coolers. Nice choice
They're insanely good value. The only other competitor I've found that's on the same level and price point is Snowman, and they're much harder to come by.
Thermalright rocks!
been tryinng to find like a old school case but im struggling
Too late! I already have one 😂
Its a simple build, enlight 7237 case, 2600x under a wraith prism, 16gb of ram, 3060ti, some a320m msi board (the cheapest working am4 mobo i could find on ebay), 650w evga modular psu, and two 80mm bequiet fans (one "intake" up front, one exhaust (has a cardboard and tape duct so it can only pull air from under the cpu cooler)).
It does everything I need from a 2nd pc, and could easily be a main pc if it wasn't made almost entirely out of parts that were at one point in my main pc.
Thermals aren't that bad, I haven't seen either component hit 85c while gaming (if we're playing by gaming laptop rules this is a solid victory. I do not want to drill out the bottom of the case for larger fans like I often see people do.)
Given that I mostly use it for watching youtube in bed its overkill, but I had almost everything on hand and needed to replace a decade old laptop.
I wouldn't ever build a sleeper PC because of bad airflow
Looks like there is room for a larger front fan.
My latest AM5 kind of looks like a sleeper, as it's in an Aerocool Syclone 2 - but I will never give up on my DVD-RW drives
I think u can put the exhaust and intake fan to reduce the temp.
I ordered a 120mm hole saw off amazon along with a 20 pack of fan grills for this exact situation. I get a lot of cases that don't have enough air flow. I can only speak for amazon in the states but it's so cheap I don't even factor in the cost. Looks factory to.
I have just realized that you remind of Eddie from my favorite show "Bottom" when he gets genius idea, you are only missing the hat
Hahaha! Well I won't be presenting the videos in my underwear if that's what you were hoping for 😅
But seriously thank you again for your support
only true friends would appreciate it 😂
can you send me the casing
I built a sleeper PC end of last year, begining of this year.
I bought the case cheaply from ebay, and then I used an angle grinder to cut a hole in the bottom for ventilation, which then I covered with a 3d printed grill, I made the legs taller to allow for more air in. The case front had already a deep in the front panel which I followed the lines and cut 2/3 off and replaced with retro looking vents, I also followed the patern on the blank 5.25" and 3.5" blanks, It made it convisigly retro while still being great for cooling. The only thing giving away are the usb 3.0, usb c and card reader front panel I/O.
Edit: For anyone wondering, not the highest spec parts, but what I have: Ryzen 5 5600G, 32GB Ram 3200MHz, RTX 2080 Super, Toughpower SFX 1000W Gold (already had it coming from SFF, used an adapter with holes for extra airflow) 1x M.2, 2x Sata SSD, and 6 HDDs
Using a modded Cryorig C7 cpu cooler with a Noctua Fan on it, and 2x front panel 120mm noctua fans. No issues with cooling.
Cant get some decent 80mm fans for the front and back?
You could get some on the back I suppose but there's no other mounts
And to be real, I didn't really want to spend any more money on this one!
why not put 2 exhaust fan on it?
See pinned comment
@@thecomputersurgeon Find somewhere....
There are two fan mounts in the back that you didn't use? I mean, without that... um... where's the exhaust? I realize sleepers aren't your thing, but...
Once thing about building these, for me anyways, is that I locate cases that have front intake and rear exhaust. It's sort of my way of testing platforms with lower spec components until the build is ready for prime time. Sometimes, I come to love these weird mashups of tech generations.
I also game on a CRT with a modern PC, so obviously I'm one of those tech geeks that digs this aesthetic. I'm old...
None of what you're saying is wrong, but the case was salvaged and I don't own any 80mm fans - it would be a waste of money as I have no other use for them!
It's very nice! But you do lose points for not hooking up the floppy and optical drive.
Cool
After 8 hour long shift lying in bed watching a shirtless English dude talkin dirty about a PC at 1:35 in the morning, the faq am i doing
You have peaked, my friend
you should benchmark the pc's you make with star citizen thats the real test haha
Wake up honey, computer surgeon posted
Don't worry Will, she already knows. 😜
Too late, i built mine 2 days ago (i'm not joking it's quite a funny situation)