Really clean restoration. There's something about old retro PC cases that makes me feel happy. Good to see an ol dcase being cleaned up and put into use.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
That Inwin case brings back memories of a bygone era! I remember having one during the early P4/ Athlon Classic days though not with the same front bezel.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Did good, lots of work put into it... nice job. One piece of advice that many overlook and think it's not necessary. It really does matter where those hoses on a radiator are located when using closed loop liquid cooling. Despite what some claim, the most efficient and effective way to mount a radiator like these are at the top with the hoses hanging down. You can also place the hoses at the bottom when mounting for a vertical position. This ensures all the air in the radiator is at the top and will remain there so your pump isn't pulling in air and make gurgling noises for more efficient cooling. My personal preference is at the top in a horizontal position, but then it depends on the case.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
I do like the sleeper esthetic, but personally I'd get one of those ide to sata boards and have kept those floppy drives and the retro disk drive. Starting up the PC with all the correct retro sounding components that's still fully functional.
I tried using those IDE to SATA converter boards and they didn't work. I tried them on several different drives CD and DVD drives but no go! I don't think they are even real.
Just found this video and absolutely love these kind of builds !! And If someone was to make a more modernised retro case I would buy one in an instant
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
🇧🇷 I have a pc just like this one to customize 🙂 I also do this type of work, and I can say that it turned out super amazing, great job congratulations 👏👏👏
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Incredible! The best sleeper I've ever seen! I wish I had your knowledge and tools (3D printer). It's my dream to build sleepers not only out of old PCs but also strange things like classic stereo amps and stuff you'd never guess were PCs. Great work sir, you have a new subscriber!
I really loved it, but since you seem to be able to 3D print as much as you want, I'd print a grill for them bottom (only the filter feels too flimsy). Great job nonetheless, absolutely wonderful result
Very nice! But If I were you I'd put the 5.25" media dashboards to the old optical drive slots, because the old cases lack the USB 3.0 ports in the front panel.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
it was pefrect case for retro setup, sorry for my honest opinion, at least i don't lie, it was hard to see... i mean you are really handy, and it looks like you know what you do, just my heard cries because of that case, which really reminds me one of first lian li cases...
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
I have an old casing from South Korea and almost the same as this one... maybe i'll give it a try too hehehe. Thank you for the idea. edit: sadly I don't have 3D Printer but I'll think of some other way maybe
Un trabajo impecable, y más cuando se cuenta con las herramientas (más que con el conocimiento)... Nos toca a los "mortales" resolver con lo que tenemos y con lo quese pueda conseguir...
Lmao. I've had one of these as a footrest for the last 3 years. It has a Core 2 Duo e8600 and GTX 275 in it. I often compare steam game requirements to my footrest as a joke.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
This reminds me of the videos by My Mechanic. Were you inspired by his style? I would have also cut a square hole into the motherboard tray so that the motherboard doesn't have to be removed from the case if a different cpu cooler requires a different backplate. Also, there are reverse facing fans that can be put into the bottom of cases that look more fitting.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
а с кнопкой включения всё же облажался.... блин так была бы прям супер сборка в старом корпусе. нужно было на переднюю крышку целиком переносить микрики и светодиоды
Really clean restoration. There's something about old retro PC cases that makes me feel happy. Good to see an ol dcase being cleaned up and put into use.
InWin S500 first generation from end of the 90s, immortal classic. 1mm anodized steel, heavy weight, all i miss now.
Water cooling magically swaped to deep cool 🙂
😂😂
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
What is a "swape"? OR is it "swapped"?
@@iam4740at the end you can see that the white AiO is swapped out for an black Deepcool one
A Must Impressive Tear Down, Rebuild, And Paint Job . . .;-)
О! Регард) А вообще делаешь нормально, спустя время твой канал может стать популярным)
так же не ожидал что реставрировать будут систему от регарда, пендосы удивляют
That Inwin case brings back memories of a bygone era! I remember having one during the early P4/ Athlon Classic days though not with the same front bezel.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
This is the kind of PC restoration we need to see, nicely done good sir.
This is one of the coolest videos on YT, so freakin satisfying.
Wow, I watched it without any pause or skip. why is it so interesting
Did good, lots of work put into it... nice job. One piece of advice that many overlook and think it's not necessary. It really does matter where those hoses on a radiator are located when using closed loop liquid cooling. Despite what some claim, the most efficient and effective way to mount a radiator like these are at the top with the hoses hanging down. You can also place the hoses at the bottom when mounting for a vertical position. This ensures all the air in the radiator is at the top and will remain there so your pump isn't pulling in air and make gurgling noises for more efficient cooling. My personal preference is at the top in a horizontal position, but then it depends on the case.
Yeah you want the radiator higher than the pump, any air will rise to the top of the radiator.
Very nice! I would have painted the entire case beige to really give it a retro look
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
I do like the sleeper esthetic, but personally I'd get one of those ide to sata boards and have kept those floppy drives and the retro disk drive.
Starting up the PC with all the correct retro sounding components that's still fully functional.
I tried using those IDE to SATA converter boards and they didn't work. I tried them on several different drives CD and DVD drives but no go! I don't think they are even real.
@@walterlegere1403 ua-cam.com/video/yp9AyMQ62js/v-deo.htmlsi=-VmUQVG2Hvj9Ygrp
i like the harddrive activity in the background
Just found this video and absolutely love these kind of builds !! And If someone was to make a more modernised retro case I would buy one in an instant
Good choice on the CPU.
The R7 5700X, while a bit older than the current 9000 series, is still a very decent chip all these years later.
Nice to see how you put some Star Wars vibe into it, love the textures!
Still one of my fav PC case refresh / diy / mod. Any more of these type videos planned??
I just subscribed because the AIO magically transformed into DeepCool 🤣👍
Absolutely stunning work! I desperately want to do something like this myself! :D
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Really cool, This is your best mod so far.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Tech ASMR for our ears & eyes, nice work !
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Amazing work and not forgetting the ATX PC standards that haven't changed.
🇧🇷 I have a pc just like this one to customize 🙂 I also do this type of work, and I can say that it turned out super amazing, great job congratulations 👏👏👏
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Used to do these pc modding in the early 2000s, lol
Dude I wanted you to press the power button so bad at then end lmao Nice work!
thx for the satisfying video !
Fantastic job, super job, excellent modding
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Loved the Hustle Bro! Keep it up!
This was superb
It's stunning
Excelente, pode mandar tudo pra cá... 😁😎
kkkkkkkkkkkkk
Your video is sooo relaxing to watch broo, subscribed
Incredible! The best sleeper I've ever seen! I wish I had your knowledge and tools (3D printer). It's my dream to build sleepers not only out of old PCs but also strange things like classic stereo amps and stuff you'd never guess were PCs. Great work sir, you have a new subscriber!
So, LTT sleeper doesn't count?
There are services like PCBWay you can send your CAD files to to have printed
I had that case from a junk pc I picked up. It was strong enough to use as a stool. They don't make them like that anymore.
Beautiful 😍😍😍😍
YOU SUPPOSED TO HAVE HIGHER VIEWS. PLEASE DO 4090 rtx with OLD PC LIKE THIS
Wish I had the skills this guy has.
imagine someone from 30 years ago watching this
Muy chula que quedó la torre . Amigo
Such a cool video
I like it allot!
10/10
I really loved it, but since you seem to be able to 3D print as much as you want, I'd print a grill for them bottom (only the filter feels too flimsy). Great job nonetheless, absolutely wonderful result
Really good craftmanship, a little bit less paint i would use and you need to fil the space on the back fan so air goes out!!
Very nice! But If I were you I'd put the 5.25" media dashboards to the old optical drive slots, because the old cases lack the USB 3.0 ports in the front panel.
keep up the good work brother
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
What an awesome video ❤❤️
You deserved a subscribe bro. I love this content
❤ premium quality
Awesome work
OMG! Beautiful!
it was pefrect case for retro setup, sorry for my honest opinion, at least i don't lie, it was hard to see... i mean you are really handy, and it looks like you know what you do, just my heard cries because of that case, which really reminds me one of first lian li cases...
Beatiful case !
That is Beautiful
Beautiful case and PC!
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
I have an old casing from South Korea and almost the same as this one... maybe i'll give it a try too hehehe. Thank you for the idea.
edit: sadly I don't have 3D Printer but I'll think of some other way maybe
Very good Job.....👍🏻👍🏻👍🏻🇩🇪
Un trabajo impecable, y más cuando se cuenta con las herramientas (más que con el conocimiento)... Nos toca a los "mortales" resolver con lo que tenemos y con lo quese pueda conseguir...
Lmao. I've had one of these as a footrest for the last 3 years. It has a Core 2 Duo e8600 and GTX 275 in it. I often compare steam game requirements to my footrest as a joke.
nice work
wow nice work
I love this case. Nice work. Its a old InWin 500. The big tower is a little bit cooler
looking really good
Very well done, I kind of wish the paint would have been a satin or matte type but otherwise you did a good job!
Keşke kapağın ortasını kesip temperli cam ekleseydin 👌
Masterfully done!
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
Cool stuff
Так приятно на это смотреть
12:00 Have u some recomandation for dust filter ?
What's the material used for the rubber feet?
Subscribed 👍🏻
This reminds me of the videos by My Mechanic. Were you inspired by his style?
I would have also cut a square hole into the motherboard tray so that the motherboard doesn't have to be removed from the case if a different cpu cooler requires a different backplate. Also, there are reverse facing fans that can be put into the bottom of cases that look more fitting.
What brand and hardness of TPU did you use for the 3D printed rubber feet?
Nice Work.
nice sleeper !
Aside from the front panel, lack of front airflow, mismatched colors, good job for a first time resto.
Does it run good? We should get a review.
Неплохая идея и воплощение, но почему не сделал стекло боковое???
My very first desktop pc was in that exact case. Intel Pentium Pro 200mhz. It was on an Intel motherboard that allowed an overclock to 233mhz.
this is the computer that sent the REGARD store, for the FLFn blogger, for restoration and assembly for 100 thousand rubles ua-cam.com/video/weyi9c2BCqI/v-deo.html
hi, where can i found your stl files to replicate your project?
on 13:27 what is the name of those screws you hammered in the top of the case????
they are pop rivets
que es el aereosol que le aplicas entre una capa y la otra????
Full pc build on my second channel - ua-cam.com/video/lWwePOoYFkI/v-deo.html
Whatever happened to “falcon cases” everyone had to have one back in early 2000’s!
а с кнопкой включения всё же облажался.... блин так была бы прям супер сборка в старом корпусе. нужно было на переднюю крышку целиком переносить микрики и светодиоды
The pigtailed PCIE cables for the gpu worries me.
you should put a tag for sleeper pc since thats what you made
Age is just a number .. but soul is young 😁
The sound it makes makes me think the fans are not secured correctly and they are producing a little bit of rattle.
impressive work but... I think you forgot about the cable management, luckily you didn't show the inside of the Case as much at the end 😂
Heat must love this pc when 50% of the radiator gets airflow.
Would have added a window in the side panel, other than that, nice work
I have a 2001-2004 era Gateway Case that i'm dyeing to restore, but i don't have the equipment
Zalman -> Deepcool?
99.1% pure👍
Детали на 3d принтере прекрасны. За выдув беспокоюсь. Может не хватить. Можно было доработать для полноценного диаметра отверстия.
там на выдув 1 вертушка, мне кажется слишком мало, можно было бы сделать снизу под выдув еще пару вертушек.
bad conection in the gpu , dont use the same cable x2 gpu power. use x1 x1 . u can overcharge the line if use x2 in 1 cable.
Regard or pegard?
Why not a Ryzen 7600 + DDR5?
Кажется, этот компьютер потом разыграли на стриме
perfect
Excellent work but retro is lost when the floppy and cd rom is removed. Should have kept the façade of them in the front for loks