Nope. Take a look from the side profile they showed, the spare wheel is too close. Maybe if you fit a 1 inch spacer on the carrier then it could clear it
The Prado is only meant to do the school run and go to the shops so it's really not needed. I guess the tow points will be handy for winching it onto a flat bed tow truck.😀
the hoops angles look bit weird when you look from the back. can you make them maybe parallel to the body. and spare would look nicer if it was centered, otherwise it hides factory lights,i know you have repeaters on the bar, but you loose the new prado look, and it looks like any other 4WD from the back
Unless you intend to always drive in reverse I can’t understand why you would add this much weight to the rear of this vehicle? Everybody is in a rush to be the first with mods for the 250. The smart stuff is yet to come.
Exhaust is just as exposed as it would be with the plastic bumper, and the bar has ADR approved tail lights so you cannot be defected for them. Same lights that many people use for a tray on a ute
This is a fucking company mate, as an american , i am proud to have ordered this from a company that takes pride in their own countries (AUS) quality product.
….and one of the logical reasons for a rear bar is getting the tyre out to mount a long range fuel tank which is an additional 80kgs full. I guess you could tow a trailer for your Engel?
That blue colour is proper nice.
👎
Wow the bar really complete the look of the car
Nailed it again lads. Good stuff 👌
Any options available for rerouting the rear camera so it can still be used?
That's a great set up. May I ask what the weight of it is? Cheers
Need to make a simpler version, the side hoops, all the exposed latches, the rear plate with the holes, etc make it look very busy.
Business opportunity for yourself to make one 👍
@steph9445 I am a designer, but not vehicle accessories
Side hoops are optional.
Very bloated looking 😱
Looks epic! Well done guys!
you guys need one 🤫
Do it.
Haha, we do need one! Would look shmick in white
what is the weight of the rear bumper?
What a great looking bar, well done guys
Please make a video for the 200!
Is the inept motor going to handle that bar
When are you gonna develop a bar for the best cruiser (90 series)?
Do you export to USA?
Long Range America sell their products!
@thecruisercompany Could you open the pop up window without opening the wheel carrier?
Doesn't look like it
Looks like it’s possible - I guess it’ll depend on the wheel/tyre combo and the position of the wheel carrier (which is adjustable).
@@ClipsByMilesadjustable side to side only isnt it? Thanks
Nope. Take a look from the side profile they showed, the spare wheel is too close. Maybe if you fit a 1 inch spacer on the carrier then it could clear it
Unless if the wheel carrier can be adjusted up and down is another option.
The Prado is only meant to do the school run and go to the shops so it's really not needed. I guess the tow points will be handy for winching it onto a flat bed tow truck.😀
Can I get a bar thats centred in the middle. The right side blocks the right lights
What size are the tires??
Are you interested in making a rear bar for a 79 tub?
Are you considering something for the Lexus GX 550?
the hoops angles look bit weird when you look from the back. can you make them maybe parallel to the body. and spare would look nicer if it was centered, otherwise it hides factory lights,i know you have repeaters on the bar, but you loose the new prado look, and it looks like any other 4WD from the back
Factory exhaust enters the chat: "Stuff your departure angle!"
Looks nice tho....
do you make em for next gen everests?
Seems to me that the tire carrier blocks the rear tail light? Isn’t that a serious safety issue?
That's why there are tail lights in the bar.
Why you leave Keep it reet?
Unless you intend to always drive in reverse I can’t understand why you would add this much weight to the rear of this vehicle? Everybody is in a rush to be the first with mods for the 250. The smart stuff is yet to come.
That exhaust will last 5 mins off-road or you get defected as all the stop lights are covered on both sides
Exhaust is just as exposed as it would be with the plastic bumper, and the bar has ADR approved tail lights so you cannot be defected for them. Same lights that many people use for a tray on a ute
Looks awesome! Will have to look into getting this bar up to Canada.
aviable in Europe ?
Unfortunately the 250 lacks payload so I personally wouldn't be installing a rearbar on one. The product itself looks great
This is a fucking company mate, as an american , i am proud to have ordered this from a company that takes pride in their own countries (AUS) quality product.
There goes your payload 🤦♂️
2 passengers max now. That's it, payload reached.
Yeah but you’ll look like a proper Malcolm Douglas and once you add the front bar your passenger will need a script for ozempic.
….and one of the logical reasons for a rear bar is getting the tyre out to mount a long range fuel tank which is an additional 80kgs full. I guess you could tow a trailer for your Engel?
nice car thx
mint
anything for the New LC 300 I like the rear bars . looks amazing.
Think you should have spent a bit more time the side looks like crap
Nice but I'm not sure about the shirt😊
Needs a better designer
Bar looks good, shame about the Prado
I just saw 3 of these at the local dealer and i must say it is not a good looking vehicle. It is quite ugly.
In all fairness it doesn't look good. Its way to chunky