Toyota were so impressed with what kaon did for the 150. They decided to challenge them with the 250 rear boot. Excited to see how kaon improve this car
Absolutely love your videos ,gives people honest visual insight to your products and how much money effort and time goes into development. I have a 2015 Prado with a lot of your products fitted and they are all great . Really Looking forward to see what you have coming with videos and product range for the 250.
IMHO, the rear seat set-up is absolutely an afterthought. No doubt our excellent Australian after-market crew will sort most of it out in short order, but it it's hard not to feel Toyota have done just enough where everyone will buy it regardless of any issues. I wait and watch. Thanks for the video.
We're counting on the brains in our Australian aftermarket industry too. Where there's a challenge, there's bound to be clever and creative solutions in time. ;) Thanks for following along!
You’re too humble. Be sure to never justify a vehicle purchase so you can do R&D. you’ve worked so hard over the years and I’m sure will make some awesome products for this new horid Prado. Good luck.
It was genuine honesty - when the 250 deposit was put down, it was led by R&D; this evolution (which is great for better understanding the vehicle) has come organically since. You're 100% right; it'll be nice to see Tin and the family enjoying comfort in their future travels. ☺
Car sales you tube report motor failure caused by water ingress. Perhaps you could investigate and rectify the problem? Keep up the great work, love your stuff.
Great video guys! 👍🏻 Was interesting to see the tear down of the rear and then your discussion whilst looking at the 3D scans in CAD. Keep up the good work!
Finally! KAON getting on the 250! Have had the Prado here in the UAE for a while now (we don’t have the hybrid version) and looking forward to what you what you come out with! Had a Pajero in Saudi and shipped stuff over for that too!
Gee I enjoyed this video - terrific family and KAON Team vibe! I love how Tin just works methodically through every detail and issue - hope he doesn't run off to join an orchestra though. Looking forward to this series of product development! Did Anthony suggest the GX instead? 🤣. I think the white looks better, fresher, than the bronze, and I think it will show off your products better too. Can't wait for the next installment! Thank you Team Kaon!
Sorry Guys, picked my Prado 250 "Dusty Bronze" Altitude up yesterday and I'm very happy. I still have my Prado 120 which has a lot a Kaon accessories in it which are great and well designed, and I'm excited with you guys designing accessories and your mindset on what and why your designing that part for the 250 series. I have the cargo barrier, fridge barrier and shelving in the 120 and I'm looking at doing the same thing once their available. Also looking forward to underside protection and possible step replacement. If you wouldn't mind could you please hurry up 🤣🤣 HaHa. Keep up the great work and love the videos.
Congratulations. Love watching your videos from New Orleans, Louisiana. I have the 5th Gen 4Runner. Wish we could get some of the Toyota vehicles y’all have on that side.
Comments like this blow our mind a little! Glad ot hear you're enjoying what we're up to from the other side of the world. The 4Runner is a fantastic platform, wish we got it here too - but you're right, with the 70 and the 300 we really shouldn't complain!
Love your products having used them on my LC200 & GR HILUX. now I need some gear for my Lexus GX550 so keep us updated on what’s universal. Really need your rear shelf 👍🏼
I was watching another review of that Downunder Prado, y'all. That review said it's illegal to remove the third row seats in Aussie? Is this true? I know your ADRs are pretty strict and all? I know all my Aussie mates get their Fourbies Engineered to keep their upgrades legal, coz your coppers are pretty harsh, especially in Qld?
Generally, removing the third row in Aus means the vehicle needs to get a mod plate (blue plate / compliance plate) to state it is now a registered 5-seater. It isn't difficult to get, but does incur an expense. Usually police won't get you for minor deviations like that (at least in QLD anyway), unless you're being particularly painful to deal with. Many folks will just get mod plates done because its easy and removes the concern. We'd be in that boat, too. With the 250, there's definitely the added complexity with a lot of speculation that removing the seats and altering anything in proximity to the battery may void warranties - but Toyota hasn't officially commented, do only time will tell.
What is the camp trailer you tow behind the car. I love your down to earth videos and humble beginnings. You deserve to do well. Looking forward to see what 2025 bring's and beyond.
From what I have seen of the new Prado and you show at the end is a good compliant third row seat delete. There seem to be some questions regarding warranty and compliance with a third row seat delete. I presume you saw of or have heard of the one review vehicle died because of water and the battery somehow. Perhaps you can do something to waterproof the battery setup. That whole rear setup looks like an after thought. . One thing I am sure is that you will come up with some good solutions and mods for this new model Edit Saw an update on the Prado 250 that the battery died from water. Apparantly water got in via the air filter and the 48v system failed Sounds odd but we will prabably never know how it died, but a few youtube channels have picted up on it now
Definitely a lot of questions for us all with the rear row, no concrete answers from Toyota does make it tricky. Will be interesting to see how it unfolds!
Now that you have completed with the Y 150 ... Can you guys put all that you have done or made for the Y150 into one long video so we don't have to watch bits here and bits there .... Thanks in advance
@KAONaust would love the full in-depth ones .. showing everything and explaining everything... Showing how to install everything too... That's why I mentioned a long video 😂😂
I love personal this video is. Raising your kids correctly here. Congratulations on 10 years of your business! Can't wait for more to come. I do love how toyota used the fjs mirrors for the 250. Sadly it seems to not be holding up as well as prados of the past.
There's a lot of similarities between the FJ and the 250 when you sit them side by side! They seem to have gone largely unnoticed but it was really cool to spot them when we had them parked side by side in the workshop.
Slightly off topic, but out of interest, what are some of the ways you've stored water on the FJ in the past? I'm trying to solve this one at moment, without carrying on rear door or overloading roof rack with combined weight of water + accessories etc I love the 150 Prado water tank you designed, wish it could sqeeze under the FJ 😅 Good luck on the 250 ✌️
I believe it's mostly been that Tin and the family store water in their camper trailer, and use Rotopax or smaller interior storage containers to augment that if needed. Wish we could fit the 150 tank under the FJ too!
That battery location is so disappointing. I know it was the easy option (as it just uses the mounts / housings / etc from the petrol hybrid) but there seems like there was plenty of other ways it could have been done!
@ I’d been told that locally they saw it and freaked out. And the bin was developed last minute, locally, and actually delayed release. I guess we are not considered a big enough or important enough market to develop a dedicated moulded / pressed plastic part! It’s a shame it can’t be under the second row seat like the hilux - but that would mean loss of tumbling / access to third row. The overseas non hybrid / non 48V versions have a 3rd row similar to the 150 where they disappear into the floor.
@ certainly a controversial solution that has caused much conversation. Many people claim to have cancelled orders. The truth would be interesting but we will never know.
Those front white plastics buffers below the headlights loook so damn ugly and yes the round retro headlights that every other country got look so much better. Perhaps design & develop a scaled down lightweight front alloy bar that gets rid of hideous plastic buffers and allows mounting of spotlights would be a perfect project even if you have to do it jointly with a local bar manufacturer Please do a Kaon product to get rid of the spare tyre under the rear (it was such a backward move by Toyota as was going away from the side opening tailgate which was perfect as gave you direct access to the cargo bay and the option for the fold-down table which is so!!!! useful as we would not be without one now. Also please explore that 48v cooling fan vent uinder the cargo floor as with water cossings/puddles as watched in horror re that YT review offroad where the water ingest via the fan shut down the car and it had to be towed back to a Toyota Dealer. Very concerning for any trips where water crossing is involved. No water bottle holders in the lower door map pockets was a big fail as with delete of sunglass strorag overhead which i use all the time - perhaps develop an overhead bolt in multipurpose panel as per the Grenadier "which is awesome" giving that aircraft cockpit vibes but also very functionable. Yeah that back cargo area sucks - interesting in Sth Africa they did not bother with the 48v volt system and it was completly deleted so they have a normal alternator and startor motor and a flat rear cargo floor (why we we not offered that option is hard to understand)
Awesome new adventure, I just watched car care nut on failure cause of Toyota hybrid batteries which rare. Cooling is the key. The cooling design is very similar looking to the Prius he showed. Keeping that fan clean is key aparently. ua-cam.com/video/TGhv2RdjpHU/v-deo.htmlsi=wB18N1ns588hby2Q
Toyota were so impressed with what kaon did for the 150. They decided to challenge them with the 250 rear boot. Excited to see how kaon improve this car
😂 Haha!
Not much of a challenge really
Absolutely love your videos ,gives people honest visual insight to your products and how much money effort and time goes into development.
I have a 2015 Prado with a lot of your products fitted and they are all great .
Really Looking forward to see what you have coming with videos and product range for the 250.
Thanks for following along! Your support and kind words mean a lot to our team.
IMHO, the rear seat set-up is absolutely an afterthought. No doubt our excellent Australian after-market crew will sort most of it out in short order, but it it's hard not to feel Toyota have done just enough where everyone will buy it regardless of any issues. I wait and watch. Thanks for the video.
We're counting on the brains in our Australian aftermarket industry too. Where there's a challenge, there's bound to be clever and creative solutions in time. ;) Thanks for following along!
Love your work guys. Big fan of your products. This is a lovely, authentic video. Well done.
Thank you for the kind words!
You’re too humble. Be sure to never justify a vehicle purchase so you can do R&D. you’ve worked so hard over the years and I’m sure will make some awesome products for this new horid Prado. Good luck.
It was genuine honesty - when the 250 deposit was put down, it was led by R&D; this evolution (which is great for better understanding the vehicle) has come organically since. You're 100% right; it'll be nice to see Tin and the family enjoying comfort in their future travels. ☺
Car sales you tube report motor failure caused by water ingress. Perhaps you could investigate and rectify the problem?
Keep up the great work, love your stuff.
Great video guys! 👍🏻 Was interesting to see the tear down of the rear and then your discussion whilst looking at the 3D scans in CAD. Keep up the good work!
Glad you enjoyed it! It's always great to dig into the challenges with a vehicle and then the insights the designers have when trying to solve them!
Loving the videos!
Just hope the 150's don't get forgotten in your product range 😂
Don't worry, it's not going anywhere! We still have several things in development for the 150.
Looking forward to see what you can do!
Thanks Chris!
Love the new KAON 3, looks great and be exciting to see what gear comes out for it.
Thank you! Always fun to start anew with a vehicle!
Finally! KAON getting on the 250! Have had the Prado here in the UAE for a while now (we don’t have the hybrid version) and looking forward to what you what you come out with! Had a Pajero in Saudi and shipped stuff over for that too!
Yes! Deliveries of these only started in Nov in Australia, things move slower down under - haha! Thank you, we're looking forward to getting stuck in.
Exciting times ahead for 250 accessories to come.
For sure! It'll be great to see what the aftermarket industry does with the platform.
Cant wait to see what you develop, very exciting times 🫶
Thanks Martin!
Gee I enjoyed this video - terrific family and KAON Team vibe! I love how Tin just works methodically through every detail and issue - hope he doesn't run off to join an orchestra though. Looking forward to this series of product development! Did Anthony suggest the GX instead? 🤣. I think the white looks better, fresher, than the bronze, and I think it will show off your products better too. Can't wait for the next installment! Thank you Team Kaon!
Steve Zodiac is back! What, no Tuba playing for Tin? :P
Thanks for tuning in, we're looking forward to seeing how it unfolds.
@@KAONaust ♥♥♥♥♥
Fantastic video
Nice to see the change from the FJ to the LC250. I did the same upgrade for the same reason of the size thing and kept the FJ too.
You're in the same boat! How are you finding your 250 so far?
@@KAONaust digging it so far but we have the gas 2.4 and I think you had more fuel tank options too
That handheld scanner blew my mind!
We love our 3D scanners, incredibly cool!
Sorry Guys, picked my Prado 250 "Dusty Bronze" Altitude up yesterday and I'm very happy. I still have my Prado 120 which has a lot a Kaon accessories in it which are great and well designed, and I'm excited with you guys designing accessories and your mindset on what and why your designing that part for the 250 series. I have the cargo barrier, fridge barrier and shelving in the 120 and I'm looking at doing the same thing once their available. Also looking forward to underside protection and possible step replacement. If you wouldn't mind could you please hurry up 🤣🤣 HaHa. Keep up the great work and love the videos.
Haha! Thank you for your support, and congrats on the new car! Great choice in the Altitude x Dusty combo.
16:06 do you recon water can come up through the drain/out gassing vent?
If so is there away to block it or even create a mechanic shutter.
It's a good question! We'll be giving it some thought thats for sure.
Congratulations. Love watching your videos from New Orleans, Louisiana. I have the 5th Gen 4Runner. Wish we could get some of the Toyota vehicles y’all have on that side.
Comments like this blow our mind a little! Glad ot hear you're enjoying what we're up to from the other side of the world. The 4Runner is a fantastic platform, wish we got it here too - but you're right, with the 70 and the 300 we really shouldn't complain!
Love your products having used them on my LC200 & GR HILUX. now I need some gear for my Lexus GX550 so keep us updated on what’s universal. Really need your rear shelf 👍🏼
Thanks for the support! Our scans indicate a heap of crossover to the Lexus, so you should be in luck!
I was watching another review of that Downunder Prado, y'all. That review said it's illegal to remove the third row seats in Aussie? Is this true? I know your ADRs are pretty strict and all? I know all my Aussie mates get their Fourbies Engineered to keep their upgrades legal, coz your coppers are pretty harsh, especially in Qld?
Generally, removing the third row in Aus means the vehicle needs to get a mod plate (blue plate / compliance plate) to state it is now a registered 5-seater. It isn't difficult to get, but does incur an expense. Usually police won't get you for minor deviations like that (at least in QLD anyway), unless you're being particularly painful to deal with. Many folks will just get mod plates done because its easy and removes the concern. We'd be in that boat, too.
With the 250, there's definitely the added complexity with a lot of speculation that removing the seats and altering anything in proximity to the battery may void warranties - but Toyota hasn't officially commented, do only time will tell.
I remember driving out of those same doors in 2017 in my new Toyota Fortuner ✌🏻
Surely Calvin is fanging for the FJ keys. Make a very cool first car.
That it would!
What is the camp trailer you tow behind the car. I love your down to earth videos and humble beginnings. You deserve to do well. Looking forward to see what 2025 bring's and beyond.
An Ultimate Camper - really capable off-road and lightweight to boot. Thank you for your support!
There is a lot of space under the bonnet … surely the 48v stuff could have been placed there somewhere
From what I have seen of the new Prado and you show at the end is a good compliant third row seat delete.
There seem to be some questions regarding warranty and compliance with a third row seat delete.
I presume you saw of or have heard of the one review vehicle died because of water and the battery somehow. Perhaps you can do something to waterproof the battery setup.
That whole rear setup looks like an after thought.
.
One thing I am sure is that you will come up with some good solutions and mods for this new model
Edit
Saw an update on the Prado 250 that the battery died from water. Apparantly water got in via the air filter and the 48v system failed
Sounds odd but we will prabably never know how it died, but a few youtube channels have picted up on it now
Definitely a lot of questions for us all with the rear row, no concrete answers from Toyota does make it tricky. Will be interesting to see how it unfolds!
Where is your 12v starting battery at? For the US market LC250 our 12v battery is in the back left corner under the Jack.
I heard that removing the rear seats voids all the warranties. Hope that is not the case.
We asked firsthand and the dealer was unable to comment. Guess only time will tell!
Now that you have completed with the Y 150 ... Can you guys put all that you have done or made for the Y150 into one long video so we don't have to watch bits here and bits there .... Thanks in advance
Will pass it on to the team. Just the R&D highlights from things we made specifically during the build last year?
@KAONaust would love the full in-depth ones .. showing everything and explaining everything... Showing how to install everything too... That's why I mentioned a long video 😂😂
@KAONaust I am keen to get my rigg full of your gear ... I am in Vic ..
I love personal this video is. Raising your kids correctly here. Congratulations on 10 years of your business! Can't wait for more to come.
I do love how toyota used the fjs mirrors for the 250. Sadly it seems to not be holding up as well as prados of the past.
There's a lot of similarities between the FJ and the 250 when you sit them side by side! They seem to have gone largely unnoticed but it was really cool to spot them when we had them parked side by side in the workshop.
@KAONaust would love a video of some in depth similarities and differences between the cars, 300 included!
Slightly off topic, but out of interest, what are some of the ways you've stored water on the FJ in the past?
I'm trying to solve this one at moment, without carrying on rear door or overloading roof rack with combined weight of water + accessories etc
I love the 150 Prado water tank you designed, wish it could sqeeze under the FJ 😅
Good luck on the 250 ✌️
I believe it's mostly been that Tin and the family store water in their camper trailer, and use Rotopax or smaller interior storage containers to augment that if needed. Wish we could fit the 150 tank under the FJ too!
That battery location is so disappointing. I know it was the easy option (as it just uses the mounts / housings / etc from the petrol hybrid) but there seems like there was plenty of other ways it could have been done!
Lazy engineers or been counters have too much say.
There's definitely a few other cavities that would have been our choice. As Tin said, there's always a story - oh to be a fly on the wall!
@ I’d been told that locally they saw it and freaked out. And the bin was developed last minute, locally, and actually delayed release. I guess we are not considered a big enough or important enough market to develop a dedicated moulded / pressed plastic part! It’s a shame it can’t be under the second row seat like the hilux - but that would mean loss of tumbling / access to third row. The overseas non hybrid / non 48V versions have a 3rd row similar to the 150 where they disappear into the floor.
@ certainly a controversial solution that has caused much conversation. Many people claim to have cancelled orders. The truth would be interesting but we will never know.
Those front white plastics buffers below the headlights loook so damn ugly and yes the round retro headlights that every other country got look so much better. Perhaps design & develop a scaled down lightweight front alloy bar that gets rid of hideous plastic buffers and allows mounting of spotlights would be a perfect project even if you have to do it jointly with a local bar manufacturer
Please do a Kaon product to get rid of the spare tyre under the rear (it was such a backward move by Toyota as was going away from the side opening tailgate which was perfect as gave you direct access to the cargo bay and the option for the fold-down table which is so!!!! useful as we would not be without one now.
Also please explore that 48v cooling fan vent uinder the cargo floor as with water cossings/puddles as watched in horror re that YT review offroad where the water ingest via the fan shut down the car and it had to be towed back to a Toyota Dealer. Very concerning for any trips where water crossing is involved.
No water bottle holders in the lower door map pockets was a big fail as with delete of sunglass strorag overhead which i use all the time - perhaps develop an overhead bolt in multipurpose panel as per the Grenadier "which is awesome" giving that aircraft cockpit vibes but also very functionable.
Yeah that back cargo area sucks - interesting in Sth Africa they did not bother with the 48v volt system and it was completly deleted so they have a normal alternator and startor motor and a flat rear cargo floor (why we we not offered that option is hard to understand)
Somebody really needs to make an aftermarket solution to that tow bar cover, it looks hideous.
It's not the most discreet thing, is it.
Awesome new adventure, I just watched car care nut on failure cause of Toyota hybrid batteries which rare. Cooling is the key. The cooling design is very similar looking to the Prius he showed. Keeping that fan clean is key aparently.
ua-cam.com/video/TGhv2RdjpHU/v-deo.htmlsi=wB18N1ns588hby2Q
Thanks for sharing the link, will pass it on to the team!
ua-cam.com/video/tlzdmurGvzA/v-deo.htmlsi=UXit3DOpzO9tbTY3